What is the best CPU application??
To do what? Monitor the CPU? To adjust speeds/voltages? To make it explode? Lol be specific so people here can actually help
Sent from my SGH-T999 using Tapatalk 2
Serious_Beans said:
To do what? Monitor the CPU? To adjust speeds/voltages? To make it explode? Lol be specific so people here can actually help
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
To adjust speeds so they WILL stick, now can you help Mr.Specific
robbase823 said:
To adjust speeds so they WILL stick, now can you help Mr.Specific
Click to expand...
Click to collapse
I'm pretty sure you can only OC if you have rooted your phone, have you?
Halmo said:
I'm pretty sure you can only OC if you have rooted your phone, have you?
Click to expand...
Click to collapse
Yes my phone is rooted just trying to get a CLEAR ANSWER to what is the best CPU application gee wizz
robbase823 said:
Yes my phone is rooted just trying to get a CLEAR ANSWER to what is the best CPU application gee wizz
Click to expand...
Click to collapse
The best cpu application to do what? Sorry had to
Used to use setcpu. Used antutu more as of late.
00negative said:
The best cpu application to do what? Sorry had to
Used to use setcpu. Used antutu more as of late.
Click to expand...
Click to collapse
To overclock /underclock and so the speeds I choose will stick!!!
The obvious question is are you using an overclock capable kernel? You still haven't answered that.
If you are, use Voltage Control (free from the market) or SetCPU from here on xda.
If you aren't running an overclocked capable kernel you are sol. You can't overclock a non oc kernel yet.
Clear as mud?
neubauej said:
The obvious question is are you using an overclock kernel? You still haven't answered that.
If you are, use Voltage Control (free from the market) or SetCPU from here on xda.
If you aren't running an overclocked kernel you are sol. You can't overclock a non oc kernel yet.
Clear as mud?
Click to expand...
Click to collapse
Yes I have a kernal that will overclock /underclock yes I have setcpu, yes it's installed and running, yes I'm rooted, yes it's a custom rom, yes,yes,yes,yes,BUT MY SPEEDS WILL NOT STICK,YES I HAVE A WIDGET WITH SETCPU, JUST WANTED TO KNOW WHAT WAS THE BEST CPU APPLICATION
robbase823 said:
Yes I have a kernal that will overclock /underclock yes I have setcpu, yes it's installed and running, yes I'm rooted, yes it's a custom rom, yes,yes,yes,yes,BUT MY SPEEDS WILL NOT STICK,YES I HAVE A WIDGET WITH SETCPU, JUST WANTED TO KNOW WHAT WAS THE BEST CPU APPLICATION
Click to expand...
Click to collapse
If you loose the attitude and give proper and complete information for someone to help you, you will have a much better time here.
Your question was as clear as "what is the best food?"
If you are currently using setcpu and its not working to your liking, uninstall it, reboot, and install voltage control.
robbase823 said:
Yes I have a kernal that will overclock /underclock yes I have setcpu, yes it's installed and running, yes I'm rooted, yes it's a custom rom, yes,yes,yes,yes,BUT MY SPEEDS WILL NOT STICK,YES I HAVE A WIDGET WITH SETCPU, JUST WANTED TO KNOW WHAT WAS THE BEST CPU APPLICATION
Click to expand...
Click to collapse
Oh, well in that case the best application for a CPU is to use it to process data.
neubauej said:
If you loose the attitude and give proper and complete information for someone to help you you will have a much better time here.
Your question was as clear as "what is the best food ?"
If you are currently using setcpu and its not working to your liking, uninstall it, reboot, and install voltage control.
Click to expand...
Click to collapse
Sorry bro, but that was the question I originally posted,What is the best CPU?
robbase823 said:
Sorry bro, but that was the question I originally posted,What is the best CPU?
Click to expand...
Click to collapse
Im partial to the coppermine Pentium 3's. Very overclockable. Hope this helps.
Never mind I just found the best CPU Application ever, so I'm cool thanks everyone for your input
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
robbase823 said:
Never mind I just found the best CPU Application ever, so I'm cool thanks everyone for your input
Click to expand...
Click to collapse
What one?
Sent from my SPH-L710 using xda premium
neubauej said:
Click to expand...
Click to collapse
Not trolling, just asking was asking a question about what you guys thought was the best CPU application and no I'm not stupid just trying to learn from others,but the was a mature reply that you sent, WOW, MAN IT'S NOT THAT DEEP
stevessvt said:
Im partial to the coppermine Pentium 3's. Very overclockablthe. Hope this helps.
Click to expand...
Click to collapse
Thanks bro
neubauej said:
Click to expand...
Click to collapse
Wow man really mature, I'm just asking a question MAN, I'm new to this stuff and I'm just trying to learn from some great minds that are on xda, but you are a trip for real, but they told me that before I decided to sign up
Thanks guys, I needed a laugh today
Related
I haven't seen this posted anywhere, and I thought it might be useful. I'm using eugene's SlideMR1v4, which doesn't have the tun module. I'm trying to get Cisco VPN connections working (using get-a-robot-vpnc), so I compiled this kernel module from the official android kernel (git://android.git.kernel.org/kernel/msm.git), using the android-msm-2.6.29 branch. The module compiled correctly, and it seems to insert into the kernel correctly. It gives me /dev/tun and /dev/net/tun devices. I haven't gotten vpnc to work completely; although it will connect to my Cisco VPN just fine, it doesn't seem to route packets. Anyway, this file might be useful to you guys, and if anyone has gotten Cisco VPN to work correctly on the mt3gs, let me know.
Edit [2010-07-29]: Updated the zip with a new build based off of the legend kernel source posted on HTC's web site. Supposedly it is the same as the one on stock Slide.
is it overclock or undervolted?
Sent from my Incredible using XDA App
How do I install this,... via Recovery....or what
Sent From My HTC Espresso Running Froyo Thanks to eugene373
jdkoreclipse said:
is it overclock or undervolted?
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
Whoareyou said:
How do I install this,... via Recovery....or what
Sent From My HTC Espresso Running Froyo Thanks to eugene373
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
r0man said:
FACEPALM
Click to expand...
Click to collapse
Seriously.
People, for the love of all that is good and right, read the post before commenting. This isn't a custom kernel -- it's a module for the .29 kernel that is already in use on your Slide. And if you do not know how to compile/insert a module into a kernel, you truly should not be inquiring *here* as to how to do so.
Meh.
Hahaha... r0man.. that was one of the funniest posts Ive seen in a long time...
Thanks for the humor, guys! My thoughts exactly. Anybody else actually tried this out?
A double facepalm! Wow.... Such strong sentiment. My Cubemate told me to shut the hell up; I couldnt stop laughing. Thanks for the humor - i needed that.
On the other side. Great job compiling this module, i'm sure that someone will absolutly need it, our Cisco vpn saturation is only about 30% of our serviced companies, so someone out there might want to do this with their android device. Saving post in favorites. (i foresee the boss asking about it.)
HebrewToYou said:
Seriously.
People, for the love of all that is good and right, read the post before commenting. This isn't a custom kernel -- it's a module for the .29 kernel that is already in use on your Slide. And if you do not know how to compile/insert a module into a kernel, you truly should not be inquiring *here* as to how to do so.
Meh.
Click to expand...
Click to collapse
<3
chrisinaz said:
Hahaha... r0man.. that was one of the funniest posts Ive seen in a long time...
Click to expand...
Click to collapse
eratosthene said:
Thanks for the humor, guys! My thoughts exactly. Anybody else actually tried this out?
Click to expand...
Click to collapse
pagantek said:
A double facepalm! Wow.... Such strong sentiment. My Cubemate told me to shut the hell up; I couldnt stop laughing. Thanks for the humor - i needed that.
-snip-
Click to expand...
Click to collapse
Heh, no problem gents
Edit: Deleted Post
http://www.entertonement.com/collections/2160/Super-Mario-Bros-death-pegasus-sound
bhilgeman said:
I couldn't help it...
Click to expand...
Click to collapse
i much prefer this one!
TomorrowSpace said:
http://www.entertonement.com/collections/2160/Super-Mario-Bros-death-pegasus-sound
Click to expand...
Click to collapse
epic just epic
LOL, Well, I actually put a [REQ] thread on this over 1 month ago but I see it is gone now.
Gonna try this on mine!
............................................______ __
....................................,.-‘”.................``~.,
.............................,.-”................................“-.,
.........................,/..........................................”:,
.....................,?........................... ....................\,
.................../.................................................. ..,}
................./.................................................. ...,:`
.............../................................................,: ”....../
..............?.....__............................ ..........:`......../
............./__.(.....“~-,_............................,:`......../
.........../(_....”~,_........“~,_....................,:`..... ..._/
..........{.._$;_......”=,_.......“-,_.......,.-~-,},.~”;/....}
...........((.....*~_.......”=-._......“;,,./`..../”............../
...,,,___.\`~,......“~.,....................`..... }............../
............(....`=-,,.......`........................(......;_,,-”
............/.`~,......`-...............................\....../\
.............\`~.*-,.....................................|,./.....\,__
,,_..........}.>-._\...................................|........... ...`=~-,
.....`=~-,_\_......`\,.................................\
...................`=~-,,.\,...............................\
................................`:,,.............. .............`\..............__
.....................................`=-,...................,%`>--==``
........................................_\........ ..._,-%.......`\
...................................,
Fordude said:
LOL, Well, I actually put a [REQ] thread on this over 1 month ago but I see it is gone now.
Gonna try this on mine!
Click to expand...
Click to collapse
Cool, let me know how it works out, I have a pretty good build process now so I can crank out pretty much any module that anybody needs.
Initial tests #fail with Eugene's MYFROYO_RC_4 - I'll keep looking into this.
Begging HTC some more to release their Kernel source for this device - not sure if this will help though.
This module is for Eclair, Froyo uses a newer kernel. I haven't gotten around to installing Froyo on my phone, since it doesn't seem nearly as usable. That being said, I can probably compile it for the Froyo kernel if somebody will run a 'uname -a' on their Froyo install and post the output.
Here you go... Guess I could do it from AOSP as well.
Ok, this worked great with eclaire! Dunno why I didn't think of building this from the AOSP.
Good work - this will help us out at work!!
Hi everybody, thanks in advance for reading this. Well, i have a problem... i get low score on every benchmark app... like quadrant, take a look
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i compare it with a friend, and his score is +5200 :/ same configs, recently fully wiped and evertything, but i can pass the 4000 points no matter what i do.
This is the firmware installed, just stock.
So, do you think my scores are normal or my device has something buggy :/ ? thanks
Why don't you root it and install siyah kernel. And try again
Sent from my GT-I9300 using xda app-developers app
Because he's wondering why its low on a stock firmware. He knows he can get higher
Sent from my Galaxy Nexus using Tapatalk 2
I am rooted and my score is 5596
avataranjie said:
Because he's wondering why its low on a stock firmware. He knows he can get higher
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Exactly, thats the problem.
The question was about being on stock I believe. Why is rootyourphoneandflash suggested? Not everyone wants to root and flash.
@OP.. does it feel slow to you? Have you tried other benchmarks?
Its quadrant for Christ sake. When has this app ever been uaed for real world benchmarking?!. No benchmarking application can compare to real life usage. If its smooth in real life, who cares what Quadrant says???
Sent from my GT-I9300 using xda premium
the only validity of benchmarking is for you to compare your phone when flashing between roms, and that is dubious at best,.......don't worry about them, gauge your phone on how it feels
Sent from my GT-I9300 using xda premium
Quadrant is well known as a poor benchmark.
Antutu or CF Bench are more reliable .
Or join the my quadrant is bigger than your quadrant forum .
jje
Sent from my GT-I9300 using xda premium
Oh, you e-peen vely smarr, my e-peen vely big....
*Japanese guys from chinpokomon south park episode*
Sent from my GT-I9300 using xda premium
Here are my results, albeit with SiyahKernel and OMEGA ROM:
Total: 5524
CPU: 12930
Mem: 4658
I/O: 6990
2D: 1000
3D: 2042
It's odd that you're getting those numbers... I don't think SiyahKernel can improve that much, maybe a little, but definitely not as much.
ChavitoArg said:
Hi everybody, thanks in advance for reading this. Well, i have a problem... i get low score on every benchmark app... like quadrant, take a look
i compare it with a friend, and his score is +5200 :/ same configs, recently fully wiped and evertything, but i can pass the 4000 points no matter what i do.
This is the firmware installed, just stock.
So, do you think my scores are normal or my device has something buggy :/ ? thanks
Click to expand...
Click to collapse
Benchmark tests don`t mean anything, have nothing to do with real life user xperience.
what im trying to say is, i compared mine and my friend S3, same stock firmware, run quadrant and there is a different of 1200 points
Thanks everyone for the answers
ChavitoArg said:
what im trying to say is, i compared mine and my friend S3, same stock firmware, run quadrant and there is a different of 1200 points
Thanks everyone for the answers
Click to expand...
Click to collapse
It also depends on how may apps and widgets you have running.
watsa said:
The question was about being on stock I believe. Why is rootyourphoneandflash suggested? Not everyone wants to root and flash.
@OP.. does it feel slow to you? Have you tried other benchmarks?
Click to expand...
Click to collapse
i have tryied antutu, and still lower score :/ i dont really understand
ChavitoArg said:
i have tryied antutu, and still lower score :/ i dont really understand
Click to expand...
Click to collapse
Lower score than what ??????
10,000
Benchmarks are a tool that run a series of tests no more no less . Phones and software/ apps/ firmware vary their is no true test as no phone is the same .
Suggest if you are not happy with your score .
one backup data and factory reset the phone .
still not happy return to seller/ service center
jje
Sent from my GT-I9300 using xda premium
for me I don't care about the benchmark mark at all
even you get the highest score did you very happy about it ?
and just enjoy your phone, don't think so much
Every single phone performs differently and its due to manufacturing. Also hot/cold temps can effect performance. Generally, the colder your device is the better.
Sent from my GT-I9300 using xda premium
Technically, your phone and your friend's should have the same firmware since you're probably in the same country. And this means that your benchmark scores should be quite similar. A 1200 point difference is a bit too much.
So in short, there might actually be cause for concern.
I would suggest that you wipe everything and see if it still persists. But if your phone performance is unaffected, you could just as well ignore it.
Let us share AnTuTu Benchmark results for GT-5830i here, some people got so high score, and some people had poor score.. please share your experiences here, may help alot for who makes custom ROM/Kernel... Those who use Chainfire3D, ROM Toolbox, tweaks kernel, using performance governor or overclock cpu.. please share...
Any how my SGAi are only getting this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I guess this is not too poor not too high rite...
This is my score in antutu benchmark
Enviado desde mi GT-S5830i usando Tapatalk 2
no modification ...just stock ...bad or good?
ObS3SSioN said:
no modification ...just stock ...bad or good?
Click to expand...
Click to collapse
good i think, im also not using modification just make a themes, using kernel from rafael(but mdds a lil), and just removing the stock apps of samsung then i get 1719... I think using chainfire3d can make high score maybe coz our graphic currently low the SGA(for this time)...
apu314 said:
This is my score in antutu benchmark
Enviado desde mi GT-S5830i usando Tapatalk 2
Click to expand...
Click to collapse
is it also stock?
mine is here, it is rooted but stock rom....but have themes and applications installed and chainfire 3d!
dehackers said:
good i think, im also not using modification just make a themes, using kernel from rafael(but mdds a lil), and just removing the stock apps of samsung then i get 1719... I think using chainfire3d can make high score maybe coz our graphic currently low the SGA(for this time)...
Click to expand...
Click to collapse
yeah with chainfire 3d you can get 3d graphics score upto 411 and 2d to 236...see mine!
IAmNice said:
I dont own ur device but a friend of mine does. He had 1800 or something with overclock and some other tweaks. Btw I normally reach 2000 +with my x8 on 2.3.7 with 727 mhz
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
Overclock? WHERE?
This thread is for S5830i,not X8
That´s my score
---------- Post added at 06:24 PM ---------- Previous post was at 06:22 PM ----------
sorry here it is:
ROM: Retribution beta#2
v6 supercharger
1972 yeah it's good.. anybody can beat that Xperia ...
so summary we are only can get the not up then 2000 score, anybody get idea how to improve it? but please not too much for getting 2000++ makes the phone battery life drain super fast... make it hybrid and make it superb score...
my score
Here is my score.
i'm using Retribution mod beta 2
Dunno why my SD read and SD write speed is 0.
SCORE : 1407
Shalzz said:
Here is my score.
i'm using Retribution mod beta 2
Dunno why my sd rear/write speed is 0.
Score
Click to expand...
Click to collapse
You need at least 500mb free space on your SD card to get a score
Sent from my GT-S5830i
looking at benchmarks hell adreno200 is way ahead of whatever videocore you guys have
madman said:
looking at benchmarks hell adreno200 is way ahead of whatever videocore you guys have
Click to expand...
Click to collapse
Reason is adreno200 has its sources and is used at its full power while VideoCore IV sources arent even released (i blame broadcom).... else i think VideoCore IV would get higher scores.
zeelie said:
Reason is adreno200 has its sources and is used at its full power while VideoCore IV sources arent even released (i blame broadcom).... else i think VideoCore IV would get higher scores.
Click to expand...
Click to collapse
hahah don't blame broadcom too fast..
zeelie said:
Reason is adreno200 has its sources and is used at its full power while VideoCore IV sources arent even released (i blame broadcom).... else i think VideoCore IV would get higher scores.
Click to expand...
Click to collapse
this are child stories that sources are not released.. samsung have full control over them.. and who said adreno200 sources ?? can you provide link ? all are closed source...whoever says don't have source blame them.. those things are only necessary to get cm7 not stock samsung roms
YEAH... I agree 100% with madman
Stock 5830M w/ Chainfire
TxaEkis said:
Stock 5830M w/ Chainfire
Click to expand...
Click to collapse
OMG, you have better performance with stock rom than other people with a custom rom
i think custom rom from raj was still on the top... droidrazr
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KTweaker Version 3.5:
http://www.mediafire.com/download.php?ayz1hpciu509o7p
Click to expand...
Click to collapse
I decided to start modifying KTweaker today so I could start testing some adjustments to the stock kernel and decided to share and give you guys that are coming from my S3 stuff the KTweaker user interface you are used to :highfive: :good:.
Of course hardly any of the KT features work since we are stuck on stock kernel forever, lol, but here are the things that work and you can set them on boot of course which is nice.
1. Boot Options
2. Backup
3. Restore
4. General Screen -> Min and Max Mhz
5. General Screen -> I/O Scheduler
6. General Screen -> I/O Scheduler Adjustments
7. General Screen -> CPU Governor
8. General Screen -> CPU Governor Adjustments
Stay out of "Voltage" screen or it will just FC on you.
Also, just answer No to all the questions when starting the app for the first time
You can only change settings in the General screen if you are rooted, if you are NOT, then nothing is going set.
See Post #3 for my current settings.
Change Log 5.20.2013
1. Add support for all 4 cores on necessary settings
2. General clean up to stop crashes in certain screens
3. Added "Load Defaults" support for SGS4 (DO NOT use this yet, its only for the guys that are using my kernel)
Change Log 5.16.2013
1. Initial release
2. Modded CPU's online to support more than just 2 cpu's
3. Fixed resolution issues with images and text on 1080p screen.
My settings
General Screen
governor = ondemand
scheduler = CFQ
General -> Governor Adjustments Screen
sampling_rate = 45000
up_threshold = 70
up_threshold_any_cpu_load = 60
up_threshold_multi_core = 50
Thanks ..nice. Something to try. Thanks for your settings also. I'm giving it a spin.
Update, this thing is sweet..phone is screamin..good work.
Sent from my SAMSUNG-SGH-I337 using xda premium
TheAxman said:
Thanks ..nice. Something to try. Thanks for your settings also. I'm giving it a spin.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Enjoy, I just added this to the OP:
Answer No to all the questions when starting the app for the first time
You got one - yay! This is a good thing
alacrify said:
You got one - yay! This is a good thing
Click to expand...
Click to collapse
Thanks buddy! Maybe one of these months we can get unlocked and I can start the kernel deving :good:
ktoonsez said:
Thanks buddy! Maybe one of these months we can get unlocked and I can start the kernel deving :good:
Click to expand...
Click to collapse
It's only a matter of days now... But still glad to see you around here, too
Sent from my SAMSUNG-SGH-I337 using Xparent Skyblue Tapatalk 2
MikeC4510 said:
It's only a matter of days now... But still glad to see you around here, too
Sent from my SAMSUNG-SGH-I337 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
Thanks. Guess we'll see, lol.
Damn I got second but wooooooohhooooooooooo my main squeeze is back to deving again im damn ready for your kernel to be release going to tweak the hell out of it like me n my team did on the s3
ktoonsez said:
Thanks buddy! Maybe one of these months we can get unlocked and I can start the kernel deving :good:
Click to expand...
Click to collapse
Geez, I got one first day, and I've been having faith in the Dan. I have faith in you too :highfive:
Now when I ask you (or Task) to make Adapt Sound work in AOSP, THEN it will get interesting...
TheAxman said:
Thanks ..nice. Something to try. Thanks for your settings also. I'm giving it a spin.
Update, this thing is sweet..phone is screamin..good work.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Great, glad it is working on more than just mine :good:
ktoonsez said:
Great, glad it is working on more than just mine :good:
Click to expand...
Click to collapse
Feels sweet here too. I should have benchmarked first, but it feels, well, like ktoonsez work - I'm not going back to check.
alacrify said:
Feels sweet here too. I should have benchmarked first, but it feels, well, like ktoonsez work - I'm not going back to check.
Click to expand...
Click to collapse
Working just fine on sprint s4
Sent from my SPH-L720 using xda app-developers app
Does this app unlock the boot loader???
task650 said:
Does this app unlock the boot loader???
Click to expand...
Click to collapse
Yes it does, hehe
task650 said:
Does this app unlock the boot loader???
Click to expand...
Click to collapse
It unlocked the bootloader, all my hair grew back, and my lottery tickets started glowing this weird gold color...
thanks a lot and looking really good
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
alacrify said:
It unlocked the bootloader, all my hair grew back, and my lottery tickets started glowing this weird gold color...
Click to expand...
Click to collapse
Now why are you telling him that, it may get spread over the forum..:laugh::laugh:
KTweaker cracks bootloader, now wouldn't that be SWEET!
No,serious, this is a must app. With his settings, I like it. Rock and roll. hehe it's Task, and he just messin.
task650 said:
Does this app unlock the boot loader???
Click to expand...
Click to collapse
Obviously you're new here and questions belong in the q&a thread.
Haha, nice to see some familiar people here. .. and some from the skyrocket days.
Sent from my SAMSUNG-SGH-I337 using xda premium
The Title says it all
Post whatever you feel like, most people use Antutu or Quadrant Standard but feel free to add Geekbench or any others
Help some people out as well, let them know if you're using a custom rom or kernel or what version of android your on
All I can say is that this is a beast!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
J
Well... I thought the GPe ROM would do okay, but this isn't really okay, lol. This is quite bad.
Sent from my C6833_GPe using Tapatalk
LordManhattan said:
Well... I thought the GPe ROM would do okay, but this isn't really okay, lol. This is quite bad.
Sent from my C6833_GPe using Tapatalk
Click to expand...
Click to collapse
I guess theres optimizations in sonys software? but then again ive never seen the SD800 that low
This phone was missing one of the classics Benchmark threads!
Rom .290 just removed some stuff I didnt now want but is a stock one.
LordManhattan said:
Well... I thought the GPe ROM would do okay, but this isn't really okay, lol. This is quite bad.
Sent from my C6833_GPe using Tapatalk
Click to expand...
Click to collapse
So it looks to be running as low as my previous CM10 attempt. I wonder what is missing. :/
Odd result really.
shaolin95 said:
This phone was missing one of the classics Benchmark threads!
Rom .290 just removed some stuff I didnt now want but is a stock one.
Click to expand...
Click to collapse
What the hell did you remove? XD Whats taking up so much that you're getting more then 2k extra
J
hahaha not sure, just probably the usual Benchmark variances...I cant wait to OC this thing!
shaolin95 said:
hahaha not sure, just probably the usual Benchmark variances...I cant wait to OC this thing!
Click to expand...
Click to collapse
Yeah! I noticed there are no kernels except for 1 which is based on stock?
What do you think we could go up to? 2.5ghz? maybe more? The nexus 5 has an overclockable kernel that goes up to 3.0ghz! Not that you need it that high and no one has ever dared go that high but still, the options there
J
I'm back on 290 (i screwed up something on GPe), and i just ran Antutu again. I'm getting everything between 32 and 34,300.
LordManhattan said:
I'm back on 290 (i screwed up something on GPe), and i just ran Antutu again. I'm getting everything between 32 and 34,300.
Click to expand...
Click to collapse
Yeah thats good, My first ever test run was at just under 35k bit of a beast of a phone
that's mine.
monx rom unlocked
290 firmware. Getting 35 < 37 on my C6833
luca73n said:
that's mine.
monx rom unlocked
Click to expand...
Click to collapse
Looks good lets keep them coming in
pablodelouis said:
290 firmware. Getting 35 < 37 on my C6833
Click to expand...
Click to collapse
How on earth did you get it that high
I've had just under 35k but just then the best I got on two runs was 33656 on a C6802 running my own cooked rom based on .290 and doggrom 3.x
blueether said:
I've had just under 35k but just then the best I got on two runs was 336656 on a C6802 running my own cooked rom based on .290 and doggrom 3.x
Click to expand...
Click to collapse
Are you running an i7? 336656 is helluva score, lol.
Sent from my C6833 using Tapatalk
might have to remove one of the middle 6's
JackHanAnLG said:
How on earth did you get it that high
Click to expand...
Click to collapse
Run banchmark on a cool device, close all apps in the background
Looking good guys keep them coming in.
Sent from my C6833 using xda app-developers app
Also i got over 37k by overclocking the CPU to 2.35 ghz with Carbon rom, did not try to oc the GPU though, but i went back to stock 4.3 because i had my signals bars stuck at 2 bars with this rom.
I'm waiting for a full stable / no bugs 4.4 rom so i can try RevolutionKernel and push that GPU to 600 MHz
I did manage this last week before it died! DoggROM v4.6 : 34391
Stock CPU clock.