Hey guys,
I wrote this in the Q&A section and I think this could be interesting for some of you..
If your bottom cover is broken or makes some stupid noises you can simply replace it.. You can buy replacement covers at ebay and also other sites, for example:
http://sparepart.dk/en/sony-sony-ericsson-1629/sony-xperia-s-100338/spare-parts-100339/
http://www.ebay.com/itm/Original-Bu...T26i-SO-02D-/170872807890?var=#ht_4332wt_1163
http://www.handyersatzteilshop.de/a...+Cover+black+Sony+XPERIA+S+LT26i_3409642.html (german site)
To replace the bottom cover you have to follow these steps:
1. Pull the bottom cover a bit so that there is a little gap between the transparent strip and the cover.
2. Unlock the clips with your fingernails or a guiter pick.. Try to keep pulling the cover while you do this
3. Go all the way around until all the clips are unlocked.. Start at front left or right side
4. The replacement cover can be simply attached by pushing it over the naked end of the phone
See my attached pictures below
Good luck
MisterG
ps: for best results use a light guitar pick (mine was 0.60mm)
Really needed this guide. Pretty much made my bottom cap ugly when it fell and now there's a nasty bump on the edge. This should help. Though do you think the prices for the bottom cap will come down significantly? If it won't, I will be highly inclined to buy it now though it seems a bit on the costly side.
I don't know.. You're right - it's just a small piece of plastic but there's a xperia logo on it so it costs what it costs Maybe there are some non original covers but I haven't seen any yet..
mister-g1 said:
I don't know.. You're right - it's just a small piece of plastic but there's a xperia logo on it so it costs what it costs Maybe there are some non original covers but I haven't seen any yet..
Click to expand...
Click to collapse
Would be nice if more colours was available.
Sufficient unto the day is the evil thereof.
I want to replace mine, but the reason isn't so bad so I can hold off until more parts become available...
How hard to you have to pull the cap to make a gap? Quite a lot of force? because that is the part that scares me the most, haha pulling apart by baby :fingers-crossed:
Don't pull too hard The cover doesn't move very much anyway.. You only have to get a small gap to put something into, like a guitar pick (or any other flexible piece of something) Without pulling I wasn't able to get my pick placed, so if you do: well done
strongful said:
Would be nice if more colours was available.
Click to expand...
Click to collapse
Pull your cover off, grab a spray can in your favorite color and spray it Just joking - don't blame me if something goes wrong^^ Seriously: I don't think that there will be other colors than black and white in the future
Thanks Much needed guide for because of my clumsy girlfriend.
Thanks for the guide!
Just to be precise, there are only 2 clips on the front. The middle one looks like a guide, it's definitely not a clip
Cheers
I just received my cover from spareparts.
I had to wait 2 weeks because they didn't have stock but once they did, it took about 3 days to arrive to Canada where I live.
The cover feels and looks the same so that's a relief.
I dropped my phone and it cracked so I had to get a new one.
Cheers!
Hi does anyone know where to get a replacement part for the upper side (which involves both sides of the phone as well) I accidentally dropped it and know one corner is seriously damage PLEASE HELP!!!
Thanks
Sent from my XPERIA S using XDA app
tel033 said:
Hi does anyone know where to get a replacement part for the upper side (which involves both sides of the phone as well) I accidentally dropped it and know one corner is seriously damage PLEASE HELP!!!
Thanks
Sent from my XPERIA S using XDA app
Click to expand...
Click to collapse
You will get full housings on eBay but I guess you better take that to the service center as the display is fixed with the upper panel so repairing it by yourself could see you playing with fire with a delicate device. Sounds nasty though
What happens is that theres no Sony official center in my country so I don't know what to do is real ugly really? I think there's just really tight cause I saw a video where they show the battery and so
Sent from my XPERIA S using XDA app
I could remove the cover using my nails (and they are not very long...) - no need for a guitar pick...
Sent from my LT26i using xda app-developers app
Yeah, I already mentioned that it's possible to use your fingernails.. Advantage of a guiter pick is that it can be left sticked in while turning the phone freely if you have to alter your hand's position
mister-g1 said:
2. Unlock the clips with your fingernails or a guiter pick..
Click to expand...
Click to collapse
adam1000rr said:
Thanks for the guide!
Just to be precise, there are only 2 clips on the front. The middle one looks like a guide, it's definitely not a clip
Cheers
Click to expand...
Click to collapse
Okay, maybe you're right but also a guide acts like a clip while other clips are clipped
tel033 said:
Hi does anyone know where to get a replacement part for the upper side (which involves both sides of the phone as well) I accidentally dropped it and know one corner is seriously damage PLEASE HELP!!!
Thanks
Sent from my XPERIA S using XDA app
Click to expand...
Click to collapse
Check the links in my first post... There is also this website http://sparepart.dk/en/sony-sony-ericsson-1629/sony-xperia-s-100338/spare-parts-100339/ where you can get nearly everything..
By the way.. Maybe we can attach new colored bottom covers soon when the xperia sl is released.. This model is meant to be a refresh of our XS with some slightly changed hardware specs but the size should be equal.. So next time purple/blue or pink bottom cover?^^
Source: http://www.xperiablog.net/2012/07/13/is-this-the-sony-xperia-sl-xperia-s-refresh/
ps: don't take this too serious the images were reported to be fake
can i remove the cover and put it back again?
mine just make some noise...
Nice one, just put an order in for a replacement, gonna spray it a custom colour
Thank you for this guide. I dropped my phone and the only scratch was on the bottom right corner - it was driving me crazy. I got the part quickly from sparepart.dk even though I'm in California and they ship from Denmark. Phone looks like the day I got it.
Nice to hear that I could help you
tel033 said:
Hi does anyone know where to get a replacement part for the upper side (which involves both sides of the phone as well) I accidentally dropped it and know one corner is seriously damage PLEASE HELP!!!
Thanks
Sent from my XPERIA S using XDA app
Click to expand...
Click to collapse
I dont know where you can get that, but I have included the complete XS repair and replacement guide which I think you may need.
Related
So I just got a View, and for the most part it seems to be a well-crafted device. But, when I press on the front side of the plastic piece on the bottom (right above the charging port), it makes like a cracking noise, like the plastic doesn't fit right. Does anyone else have this? I'm trying to decide whether it's major enough to try to send in for warranty/RMA, especially since I took the OTA to HC and now want to HTC unlock to flash back and do S-Off for some rom action, which I think would void the warranty :-/
Mine is very solid, no cracking at all.
just got mine today and it does have that cracking noise ..
Hmm okay....well so far is 50/50 lol so maybe its common. I noticed that the plastic piece on the bottom can be slid forward and lifted off the charge port, and the noise seems to be coming from the gap between the screen border and the plastic piece over the charge port. So, maybe I'll try putting something in the gap to see if it stops. I feel stupid doing a warranty claim for something so trivial.
no cracking here, but i got something i do not like.
the screen is not fitted correctly on the lower side of the device.
It is not in line with the rest of the metal part, in fact is aprox 1 mm above it.
If you look at it you may not see it but if you swype your finger you can feel the edge of the glass.
But otherwise it is well built device.
I do not think i am going to try to replace it(or maybe i will).
That's ok. I almost ripped my bottom off looking for the sd card slot.
Sent from my PG41200 using xda premium
Well, mine has a loose volume keys, it gets annoying...click click click click click!
Sent from my HTC EVO View 4G S-OFF'd by Revolutionary!
Mine does the click when you press on plastic at bottom as well. I got mine from bens during the sale a few weeks ago. What about you?
Whoareyou said:
Well, mine has a loose volume keys, it gets annoying...click click click click click!
Sent from my HTC EVO View 4G S-OFF'd by Revolutionary!
Click to expand...
Click to collapse
Lol my View has that too! Click click click
Also afflicted with the click. Kind of annoying bit of cheapness/shodiness on an otherwise very solid device. Wondering if a silicone cover would help mask it...
I have something similar but it was on the top camera cover. Where it wraps around directly under the power button it didnt seal right, and there was a gap that irritated me. After trying to fix it with no luck I ended up sending it back to amazon and bought another. New one perfect.
After a pint or two at the pub, the lighted buttons wiggle and wave at me. Should I return the unit, or stop drinking so much?
To those who have damage on the casing of their xperia s, have you had yours repaired or replaced? Do they have casings already?
I replaced the bottom cap by myself, because of creaking noises and because it was a bit moving.
Found a replacement cap on german ebay.
Replacement was pretty easy, just pull the cover and get something thin and flexible in there to unlock all the plastic noses (fingernails, guitar pick)
Put the new bottom cap on - done!
Cost: about 10 €
Time: about 2-5 minutes.
No creaking/moving anymore - for now
How does it come off exactly? I guess it was easier for you to remove as it was already cracked, but for an undamaged cap, do I just pull it away from the phone to get it off? are there any clips etc.
No, it wasn't damaged or broken, it just didn't fit very well, so it was a bit moving and creaking all the time. It just spoiled the otherwise good build quality and solid feel of the phone.
It was pretty easy to remove.
Just pull down the bottom cap, a little gap will appear. Then use something thin, pointy and not too hard (longer fingernails, guitar pick) to push it inside the little gap and to unclip the bottom cover. Move it along the whole bottom cover.
Pull the old cover of and just push the new one in. Clips in easily.
Pictures:
Ah I see, so are there clips on both sides? And where about.. I think I can see there is one in the middle.
I will try this eventually when the caps become more widely available, mine isn't loose or anything it has just been worn
cheers
2 on the backside
2 at the front plus the biggest one in the middle of the front
Sent from my LT26i using XDA
2fuss50 said:
I replaced the bottom cap by myself, because of creaking noises and because it was a bit moving.
Found a replacement cap on german ebay.
Replacement was pretty easy, just pull the cover and get something thin and flexible in there to unlock all the plastic noses (fingernails, guitar pick)
Put the new bottom cap on - done!
Cost: about 10 €
Time: about 2-5 minutes.
No creaking/moving anymore - for now
Click to expand...
Click to collapse
Can you give us ebay link. thanks.
i found it . thx
http://www.ebay.de/itm/Sony-Xperia-...signfolien&hash=item3cc5bf27c5#ht_1773wt_1153
thanks 2fuss50 for all pics. which you included , you make it very easy to change our xperia s bottom by ourself
so if you find any thing about replacement for the whole cover please share it with us
thanks in advanced
Didn't find a whole casing, but considering the disassembly guide the casing and the screen are one part, so you won't be able to purchase the casing alone.
And it will be quite expensive :-/
Sent from my LT26i using XDA
2fuss50 said:
Didn't find a whole casing, but considering the disassembly guide the casing and the screen are one part, so you won't be able to purchase the casing alone.
And it will be quite expensive :-/
Sent from my LT26i using XDA
Click to expand...
Click to collapse
hiko posted a link where u can also finde a complete casing for 33 euros.
link: http://www.ebay.de/itm/Original-wei...015676869&po=&ps=63&clkid=9079739706956622845
Ok.. I have sent my xperia S to Comtel to replace the hall cover or case, after 3 weeks they called back to tell me how much it cost to replace the hall case, it costs 850 AED = 230 USD..
This non sense.. As the new one now cost around 1000 AED..
shawish said:
Ok.. I have sent my xperia S to Comtel to replace the hall cover or case, after 3 weeks they called back to tell me how much it cost to replace the hall case, it costs 850 AED = 230 USD..
This non sense.. As the new one now cost around 1000 AED..
Click to expand...
Click to collapse
Take it to amateur repair man
Yes I agree, I'm sure if you head into town there's normally plenty of mobile shops that do the same work for fraction of the prices of major corporations especially the likes of Sony.
Sent from my LT26i using xda premium
I know many have too but mine dropped screen first. And guess what happened. It shattered. Woops, typo, I mean I shattered with happiness because it didn't break., though I do have very ugly scratches or the white plastic right on top of the glass. I have a barely there kijj case so no scratches on the sides
Just assuring you that out phone is much more stronger than the s3
I dropped it accidentally from about 1.6 metres into bricks, SCREEN LAYING FLAT! therefore I thought my xs screen was done for.
Though I heard the bottom signal thingy is poorly built (oh yeah a few odd marks there thanks to the drop) ... Lucky mine dropped from the top first
Also have scratches on my screen protector which I'll be replacing
Sent from my LT26i using xda app-developers app
Good thing indeed! We uses case so it shall protect u know!
good info. thread closed?
theXperiance said:
I know many have too but mine dropped screen first. And guess what happened. It shattered. Woops, typo, I mean I shattered with happiness because it didn't break., though I do have very ugly scratches or the white plastic right on top of the glass. I have a barely there kijj case so no scratches on the sides
Just assuring you that out phone is much more stronger than the s3
I dropped it accidentally from about 1.6 metres into bricks, SCREEN LAYING FLAT! therefore I thought my xs screen was done for.
Though I heard the bottom signal thingy is poorly built (oh yeah a few odd marks there thanks to the drop) ... Lucky mine dropped from the top first
Also have scratches on my screen protector which I'll be replacing
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
I'm sorry about that I know how it is
Can you provide some pics of damages? You know.. For science
that's good to hear!
I dropped my HTC a few times in clubs and it never broke down I dropped some samsung phones as well.. they all died within a week after the drop
Hopefully I won't drop my SXS
My XS dropped out of my pocket whilst I was sitting on concrete... Fell less than 10cm and I have a nasty chip in the bottom part... That bit definitely isnt well built.
However the phone did then land screen down on some loose stones and there wasnt even a scratch
Anyone know if you can replace the bottom part?
Sent from my LT26i using XDA
Why So Serious? said:
My XS dropped out of my pocket whilst I was sitting on concrete... Fell less than 10cm and I have a nasty chip in the bottom part... That bit definitely isnt well built.
However the phone did then land screen down on some loose stones and there wasnt even a scratch
Anyone know if you can replace the bottom part?
Sent from my LT26i using XDA
Click to expand...
Click to collapse
yes you can:
replacement part:
http://www.ebay.de/itm/Sony-Xperia-...ignfol ien&hash=item3cc5bf27c5#ht_1773wt_1153
Disassembly guide:
http://www.sonymania.cz/storage/1331332888_sb_xperia_s_wi.pdf
thanks a lot
can we reuse the bottom cap once we remove it?
in that disassemble xperia_s_wi.pdf guide they have mentioned something like this>
Remove the Cover Bottom with your fingers.
Scrap! Not to be reused!
but i want to know can we reuse it?
zakirox123 said:
can we reuse the bottom cap once we remove it?
in that disassemble xperia_s_wi.pdf guide they have mentioned something like this>
Remove the Cover Bottom with your fingers.
Scrap! Not to be reused!
but i want to know can we reuse it?
Click to expand...
Click to collapse
I saw that today as well and was about to ask. Can anyone clarify?
One side of mine removed easily. The other not so much. But seeing as it's advised not to reuse. I'm now wondering what to do too.
So, I see only one other thread about this, but I dropped my phone (Clumsy me left it on a chair, it slid off, and spider webbed my phone(SUCH a short distance)) But, I've bought the replacement part myself, and I plan on doing the repair myself. Is there anything I should know before I actually do this? Has total disassemble of the phone been done before?
Not to hijack your thread, but it drives me nuts how my LGOG seems to seek out-on its own-a way to dive off my coffee table/sofa/end table...no matter how flat and non inclined I sit it two seconds later and...CRASH! floor time...luckily mine has been taking it ok. So I feel your pain, and hope you get the help you seek.
Sent from my LG-E970 using xda premium
bqd37340 said:
Not to hijack your thread, but it drives me nuts how my LGOG seems to seek out-on its own-a way to dive off my coffee table/sofa/end table...no matter how flat and non inclined I sit it two seconds later and...CRASH! floor time...luckily mine has been taking it ok. So I feel your pain, and hope you get the help you seek.
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
I even know your feeling -.- I've never dropped it before though, that was my first time, mostly because I treat my phones like its my second life, and because theyre expensive. This phone dropped literally a foot and webbed, I was so mad
Dr Protostar said:
I even know your feeling -.- I've never dropped it before though, that was my first time, mostly because I treat my phones like its my second life, and because theyre expensive. This phone dropped literally a foot and webbed, I was so mad
Click to expand...
Click to collapse
Found this video off a quick google search...
jtsurfs said:
Found this off a quick google search...
Click to expand...
Click to collapse
I've seen that video, but it doesn't really show how to put the replacement back in, if you use glue, what type of glue, or how much heat is required and all that such
Dr Protostar said:
I've seen that video, but it doesn't really show how to put the replacement back in, if you use glue, what type of glue, or how much heat is required and all that such
Click to expand...
Click to collapse
I replaced the digitizer on an HTC Vivid and used 3m double sided tape and doubled that up so the screen wasn't directly on top of the lcd. The video for that one recommended doing that to keep some weird effects on the screen.
given heisbig
jtsurfs said:
I replaced the digitizer on an HTC Vivid and used 3m double sided tape and doubled that up so the screen wasn't directly on top of the lcd. The video for that one recommended doing that to keep some weird effects on the screen.
Click to expand...
Click to collapse
Whats the youtube vid name?
Maybe try some silicone glue
Maybe try some of the silicone seal (blue silicone glue) to attach it. If nothing else you might try some electronic stores (specialty or other Cell phone repair stores) for the glue that is needed. I would opt for something that isn't so hard on stuck and maybe go for something that holds tight and seals well but doesn't make it damn near impossible.
I have had my Ultra Z since January. Zero problems, but this morning I removed my USB charger at work and a rubber gasket (see pic) fell out. Now the door does not close properly. I have the gasket and tried to work it back in but it would not go. There is a small tab and I cannot tell if it goes up (towards the screen) or down. I think I can get it back in with a toothpick or similar but want it to stay (and not lose it) and for it to re-seal the door properly. Not being able to close the USB door is a BIG deal to me.
I had been meaning to get a docking charger but bought some from China and they were crap. Guess I'll have to break down and get a real DK30.
The o-ring goes on the door.
Tab to back by the looks
Glue it back? What kind of glue?
Sent from my C6833 using XDA Free mobile app
mknewman said:
Glue it back? What kind of glue?
Sent from my C6833 using XDA Free mobile app
Click to expand...
Click to collapse
Try crazy glue very very small amount and please let it dry fully before putting the cap back into the phone!!!
Jammol said:
Try crazy glue very very small amount and please let it dry fully before putting the cap back into the phone!!!
Click to expand...
Click to collapse
Thanks Jammol. I'll try to figure this out. When I place it in the position it appears to belong in (now that I look closely I can see the small tab indention on the cap) but the part is so small I cannot even handle it with my big fat fingers, and don't really have a magnification station and stability setup to do it.
Big question is for the people who have had the cap break off, is there a source for the whole cap? Is it possible to install without taking the whole phone apart? Would it make sense to just throw it away and forget it was there?
mknewman said:
Thanks Jammol. I'll try to figure this out. When I place it in the position it appears to belong in (now that I look closely I can see the small tab indention on the cap) but the part is so small I cannot even handle it with my big fat fingers, and don't really have a magnification station and stability setup to do it.
Big question is for the people who have had the cap break off, is there a source for the whole cap? Is it possible to install without taking the whole phone apart? Would it make sense to just throw it away and forget it was there?
Click to expand...
Click to collapse
I don't know what part of the world you are in but you can check these out. Couple folks have bought them:
http://www.ebay.de/itm/Original-Son...zer_Ersatzteile_Werkzeuge&hash=item2339fdd95e
I say just replaced the entire cap with one of those and call it good. Mine is experiencing the same thing, tearing off little by little. I think that is where water might be getting into my phone, but I'll be replacing the phone soon anyways. Just not sure what to get yet.
I have not gotten mine wet yet other than rain in my pocket but the lines are much better with the cap on than removed, and I'd worry about the edge material getting pulled off the rest of the phone. I appreciate the ebay refrence and will try to find a US version. So is there a way to remove the old cap without breaking it off internally and having the tab rattling around inside?
I ordered a couple of the caps and a magnetic charger off thEbay US, but seller was in Spain so it will be a while. Crappy design trying to get rubber to adhere to plastic.
Does anyone know how to safely remove the old one? Just yank? slip something very thin in to try to get the tab to ride over the notch?
Thanks,
Marc
Super glue is what bonds o-rings to other materials because of the greasy slippery surface. Mine has also come loose. Contact glue, industrial glue or anything else wont bite on that thing because of its chemical resistance that the o-ring has.
try to get a hold of a bottle of Loctite 401 meanwhile if you can't wait for the parts
http://www.ebay.com/itm/LOCTITE-401...Instant-Adhesive-Super-Glue-20g-/121407567300
to remove the old one just pull..just a bit harder ...its kind of some bend at the end of the flap that's holding the thing in place inside the device.
Apply with a pin or paper clip I take it?
SÜPERUSER said:
Super glue is what bonds o-rings to other materials because of the greasy slippery surface. Mine has also come loose. Contact glue, industrial glue or anything else wont bite on that thing because of its chemical resistance that the o-ring has.
try to get a hold of a bottle of Loctite 401 meanwhile if you can't wait for the parts
http://www.ebay.com/itm/LOCTITE-401...Instant-Adhesive-Super-Glue-20g-/121407567300
to remove the old one just pull..just a bit harder ...its kind of some bend at the end of the flap that's holding the thing in place inside the device.
Click to expand...
Click to collapse
mknewman said:
Apply with a pin or paper clip I take it?
Click to expand...
Click to collapse
mmm something like that I dunno really.. I've yet have to figure this out myself lol. Use your imagination! :laugh:
At my moms work when I was young they had superglue bottles from loctite with really tiny metal pipes attached on them I wonder what loctite model that is. They could be used to do any precision work!
So it's possible to get the new one in properly once I get the old one out? From this picture it appears the new tab should slide in but I'm worried if you have to tug hard to get the old one out.
SÜPERUSER said:
to remove the old one just pull..just a bit harder ...its kind of some bend at the end of the flap that's holding the thing in place inside the device.
Click to expand...
Click to collapse
calm down...just pull on it. You won't break anything
edit: its no big deal to get the new one in
Great! Thanks, that's a relief. I'll let ya'll know how it goes when I get it. May buy a few extras too.
I got the replacement parts from thEbay tonight. Pulled on the old one and it came right out. Took 2-3 tries to get new one in. Tether was bunching up. Turns out if you hold it at about 45 regress it goes right in.
Thanks for the help everyone.
Sent from my C6833 using XDA Free mobile app
gutted!
I am so gutted i didn't see this thread before I sent my phone to Sony for warranty repair.
My gasket didn't fall off, it started to come unstuck so was hanging off and when closing the lid the gasket would unroll and the lid would open.
I sent it to Sony as I think this is there fault. The gasket should stay attached for the duration of the warranty.
They want to charge me £55 for repair, handling and shipping!! I have had my claim escalated and now they say 'upon further inspection the device is bent'!! They are willing to send it back free of charge should I not want to have it repaired...... But should I now expect the device they send back to me to bent when I know full well it was in near perfect condition when I sent to them?!?!
The bottom line is follow instructions from this thread. DO NOT send your phone to Sony.
Sony use 'authorised repair centres' so they don't even know what is going on with your device and the trust you put in Sony to give your device to a respected engineer is misplaced.