Related
My SGS2 stopped vibrating. Tried flashing, un-rooting, restoring stock and factory settings. None of these worked.
I am inclined to think that it is a hardware problem.
Has anyone else been dealing with issue? I read some posts on XDA regarding this matter but they were software related as opposed to hardware. Can anyone post instructions on how to fix it or provide any solutions for this issue?
If its hardware, why not flash stock, remove binary flash count with USB jig, and return for warranty?
Sent from my GT-I9100 using xda
premium
UpInTheAir said:
If its hardware, why not flash stock, remove binary flash count with USB jig, and return for warranty?
Sent from my GT-I9100 using xda
premium
Click to expand...
Click to collapse
Cannot get jig in Palestine. Bought the phone from the UK. Sending it back will be problematic. I will look for a repair shop.
Thanks for the quick reply
That's a "bummer" (bad luck). You could make a jig, but as you said that it would be problematic to return. Hope you can sort it easily. Sorry, can't think of anything of use right now.
Sent from my GT-I9100 using xda premium
hey there,
i got the same problem. no more vibrating at all. not with calls or notifications and not as haptic feedback. it started today (was still working in the morning), though i did not drop the phone or anything.
i am still hoping too find that it's a sw-problem. but all potential solutions i find do not help. so i guess i have to contact samsung.
but before i do that i have to get rid of all "hacking".
could you plz tell me what i have to do?
i have now cm9 20120402 nightly.
but i still have a cwm-recovery-backup of the original touchwiz (gingerbread).
-so first i make a backup of my current rom via cwm and of all my apps via titanium and store everything on my pc.
-i flash my touchwiz-backup
-i get one of those: http://www.amazon.de/s/ref=nb_sb_no...ld-keywords=Samsung+Galaxy+S2+USB+Jig&x=0&y=0 , plug it in, wait til its done and remove it again.
after that, samsung will never know i "messed" with the phone??
or do i have to consider/do something else?
tyvm!!
kws
I have the same issue.
When I was on my stock 2.3.5, I found a workaround:
- go into test mode (dial *#0*#)
- find the vibrate button, when you press it, it shouldn't work like you expect
- go back
- plug in your headphones and push the cable a bit to the left
- test vibrate again - this time it should work
- pull the cable out while vibrating, still pushed to the left, vibrations should stay on
I know it sounds crazy but it seems the hardware part that controls the vibrations is near to the jack port - excessive use of headphones, like it was case, must have damaged it somehow.
However, now I'm on CM9, so no test mode for me, I'm achieving the same effect by bashing the back button, so I get semi-constant vibration. I know, It's ridiculous.
Have the same problem here, I think it's software related because the shut down vibration stopped working when I flashed CM9 ICS, I can't remember if it was working anywhere else though. But now I'm back to 2.3.5 and it's not working at all. Did a Factory Reset, Cleaned Cache before and after the flash. Also used the Jig to reset my counter. Any clues?
I am experiencing the same issue.
Yesterday, I downgraded from 4.0.3 back to 2.3.5 as I was having a lot of problems with ICS. Now, my phone works fine again except for the fact that it does not vibrate anymore. (Which it did fine in 4.0.3 and before in 2.3.5)
I tried the trick Lechium06 mentioned in this thread but that did not work for me.
Anyone else having this issue? More important, anyone have a solution???
Greetinx
Johan
dajomas said:
I am experiencing the same issue.
Yesterday, I downgraded from 4.0.3 back to 2.3.5 as I was having a lot of problems with ICS. Now, my phone works fine again except for the fact that it does not vibrate anymore. (Which it did fine in 4.0.3 and before in 2.3.5)
I tried the trick Lechium06 mentioned in this thread but that did not work for me.
Anyone else having this issue? More important, anyone have a solution???
Greetinx
Johan
Click to expand...
Click to collapse
I saw something similar on CM9 thread, they said it could be a "bad flash", not a corrupted rom but the lack of proper cleanup before and after the flash. But I cleaned up everything before and after and I don't like reconfiguring the whole phone again for nothing.
it happend again.
dont recall what i did or if i did something last time at all. but it worked for over a year now. and now, my sgs2 doesnt vibrate at all, i tried all possible settings, tested with z-device and rebooted. nothing.
apprechiate any hint!
thx!!
kws
AW: [Q] Vibrate function doesn't work anymore, hardware issue
since i had that before, i ruled out a hardware issue. it happend when i played with the system settings. but as i sayed, i tried to reverse everything i did. now after i updated to 0206 and wiped cache and dalvik, still no vibration.
is there anything i could have missed?
is there a possibility to reset all settings to default without deleting all my data?
thx,
kws...
...tapatalking
kweso said:
since i had that before, i ruled out a hardware issue. it happend when i played with the system settings. but as i sayed, i tried to reverse everything i did. now after i updated to 0206 and wiped cache and dalvik, still no vibration.
is there anything i could have missed?
is there a possibility to reset all settings to default without deleting all my data?
thx,
kws...
...tapatalking
Click to expand...
Click to collapse
I assume since your posting in xda developers that you are rooted?
If so, just back up data with titanium backup app and factory reset, setup system and then restore USER apps and data only.
Sent from my GT-I9300 using xda premium
kweso said:
it happend again.
dont recall what i did or if i did something last time at all. but it worked for over a year now. and now, my sgs2 doesnt vibrate at all, i tried all possible settings, tested with z-device and rebooted. nothing.
apprechiate any hint!
thx!!
kws
Click to expand...
Click to collapse
Did you install another rom?
My vibration for example didn't work with some cm10.1 nightlies
it started in cm10.1 20130203. then i tried wipe cache and dalvik. nothing. then i updated to 0206 (wiped cache and dalvik again) > still nothing. went to bed. got up. everything ok! its vibration again! i am 100% sure, it did not work, when i left it on my desk last night. this morning, i checked for missed calls and it took a moment until i realized: i got haptik feedback back on patternunlock and keystrokes! checked ringtone-vibration: fine as well!
dont ask me how! would still like to know for myself.
thx,
kws
AW: [Q] Vibrate function doesn't work anymore, hardware issue
call me stupid!
suddenly this evening my phone stopped vibrating again. then i realized: quiet hours! i turned off haptik feedback at night.
could slap myself. at least ill find this thread again, next time i screw it again....
nite,
kws...
...tapatalking
Girls can use it again then. Good news for them!
Sent from the little guy
My camera worked initially but after switching it to front cam and back I can't get it to display anything and it will force close after 5 seconds.
Face unlock works without a problem and I have tried clearing the camera's data.
3rd party camera apps also fail with the same problem.
Any ideas? I am unrooted and no modifications done yet. Just got the phone yesterday..
behelit said:
My camera worked initially but after switching it to front cam and back I can't get it to display anything and it will force close after 5 seconds.
Face unlock works without a problem and I have tried clearing the camera's data.
3rd party camera apps also fail with the same problem.
Any ideas? I am unrooted and no modifications done yet. Just got the phone yesterday..
Click to expand...
Click to collapse
Thats looks like a system failure... Unrooted...
Try switching phone on and off. Be sure the problem didn't come from a recent app instaltion. Factory reset with a reliable backup and if that didn't help ring samsung. If not you could try flashing a different ROM but chances of that fixing it aren't that great!
I had this yesterday when changing video resolution, not happened since.
behelit said:
My camera worked initially but after switching it to front cam and back I can't get it to display anything and it will force close after 5 seconds.
Face unlock works without a problem and I have tried clearing the camera's data.
3rd party camera apps also fail with the same problem.
Any ideas? I am unrooted and no modifications done yet. Just got the phone yesterday..
Click to expand...
Click to collapse
Have you tried checking if there is a new firmware update for your camera? presuming its the rear camera.
Info on the firmware update here allaboutsamsung.de/2012/06/samsung-galaxy-s3-update-fur-die-kamera-verfugbar/
Ryan
Just wondering if more people have this issue. After installing 8773 thorugh Zune the front face camera is not working anymore. Camera app is crashing or showing black screen. Only way to restore back camera functionality is by resetting the phone.
Anyone else having this issue? I see some with similar camera issue but not sure if this is for frontface camera only.
Larsvb said:
Just wondering if more people have this issue. After installing 8773 thorugh Zune the front face camera is not working anymore. Camera app is crashing or showing black screen. Only way to restore back camera functionality is by resetting the phone.
Anyone else having this issue? I see some with similar camera issue but not sure if this is for frontface camera only.
Click to expand...
Click to collapse
Don't have that issue on my Titan (Unbranded Europe)
zeka1974 said:
Don't have that issue on my Titan (Unbranded Europe)
Click to expand...
Click to collapse
thanks,
unfortunately after full reset still the same problem...
Larsvb said:
thanks,
unfortunately after full reset still the same problem...
Click to expand...
Click to collapse
Try to install with the ROM that Football has in his link for Titan ROMS...probably a bad update occured.
If the problem continues, go to Assistance for repair :good:
Im on stock Droid DNA ROM. Have the latest update. Every time I try to open the camera it says "Unable to start the camera." I have already hard reset the phone 2 times and restarted. I also cleared the camera data and cache. I don't know what to do now..
Try downloading a camera app from the market and see how it works. If that app also can't get it to start then it may be a hardware issue. If it can then you know there is something wrong with the stock camera app.
Sent from my HTC6435LVW using xda app-developers app
Jaggar345 said:
Try downloading a camera app from the market and see how it works. If that app also can't get it to start then it may be a hardware issue. If it can then you know there is something wrong with the stock camera app.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
tried. It wont use the camera
Sounds like a hardware issue then.
Sent from my HTC6435LVW using xda app-developers app
This is the same error I get on the CM10.1 ROM since the camera isn't working yet... as everyone else has mentioned it's most likely a hardware issue especially if you've tried wiping the entire phone and still have the problem.
Had this happen today. Did you ever get it straightened out?
If I try a photo the flash comes on and will not go off unless I reboot. If I try a video the screen goes black and freezes. I've rebooted, "hard" rebooted by holding power button down, turned off fastboot, cleared data and cache.
I tried CameraMX from the market and it doesn't work.
I did not buy my phone from Verizon. What are my options?
It doesn't matter where you bought it, HTC will warranty it as long as you talk to them like a human and explain the situation while being respectful.
Sent from my HTC6435LVW using Tapatalk 2
Thanks bud. I'll give it a shot. I really like HTC phones I hope this (along with whatever may happen with the warranty) doesn't leave a bad taste in my mouth.
So, I've been resetting, force closing and clearing data the past 2 days throughout the day for the camera. Usually, after I've did a reset the camera will open, but when I try to take a picture the flash comes on and stays on the the app freezes. The led flash will not go off until I do a reset. A force close won't even shut it off.
Today after a reset, I opened the camera and instead of trying to take a pic I cycled through the flash settings. As soon as I did the interface switched to portrait, (like the phone was held) and it took pics and video like normal!!!!!!!!
It works now. What a crazy problem.
Completely stock DNA with latest ota update. Phone has not been dropped or anything.
Wow, that doesn't make any logical sense. How strange... Glad you got it fixed though!
Sent from my ViperDNA using Tapatalk 2
I see similar camera weirdness a lot when I'm at Best Buy in the best buy mobile section and I've intervened on 10 or 15 exchanges by tinkering with camera and gallery like clearing app data.
You've taught me a new trick in case I ever get to show off for the hot best buy mobile girls.
Sent from my HTC6435LVW using Tapatalk 2
If you have a flash light app and do not turn the flash off this will cause the camer to not start
Recently had the problem (camera won't start, or can't connect to camera). Got the solution here:
http://forums.androidcentral.com/verizon-droid-dna/244680-camera-unable-start.html
Just hold the power button for ~20 seconds til it reboots, and camera works just fine. No loss of data or anything. It's supposed to be the equivalent of battery pull.
Mine too!
bluesamg said:
Im on stock Droid DNA ROM. Have the latest update. Every time I try to open the camera it says "Unable to start the camera." I have already hard reset the phone 2 times and restarted. I also cleared the camera data and cache. I don't know what to do now..
Click to expand...
Click to collapse
Hi there ,
I have my DNA in the same situation ("Unable to start the camera").it crashes.... I have tried everything ! NOTHING works..tried to root ,change rom...maybe firmware! nope ,No solution for that i guess.
Please tell me what did you do to get it working ? did you send it back to verizon ?what did they do ? can they fix it ?or they have changed the whole phone ? please be in touch .
One more question is : Does your phone sometimes crashes ? in my case i have the same problem with the camera ..... and i have my phones system gives me :"proccess system not responding " . could that be bacuse of the camera problem ? Do you have the same ?(your phone get stuck sometime ..and goes OFF\RESTART ?)
I have the same case !! but in my country i have NO verizon here ..so actually i can't fix my phone !
What should i do ?
Thanks guys for help .
shadyabs said:
Hi there ,
I have my DNA in the same situation ("Unable to start the camera").it crashes.... I have tried everything ! NOTHING works..tried to root ,change rom...maybe firmware! nope ,No solution for that i guess.
Please tell me what did you do to get it working ? did you send it back to verizon ?what did they do ? can they fix it ?or they have changed the whole phone ? please be in touch .
One more question is : Does your phone sometimes crashes ? in my case i have the same problem with the camera ..... and i have my phones system gives me :"proccess system not responding " . could that be bacuse of the camera problem ? Do you have the same ?(your phone get stuck sometime ..and goes OFF\RESTART ?)
I have the same case !! but in my country i have NO verizon here ..so actually i can't fix my phone !
What should i do ?
Thanks guys for help .
Click to expand...
Click to collapse
Read the thread please. The answer is in it.
Sorry for the necromancy, I'm having the same issue, and no amount of resets, soft or hard, has resolved anything.
I received this phone about a month ago as a total care replacement for a very sad old Droid X that was needing to be put out to pasture. When I first got it, everything worked fine. The camera worked a couple weeks ago, even, but I went to use it today, tapped the camera icon, it briefly opened then instantly closed with a message "Unable to start the camera".
I tried a few more times, force quit, cleared cache, tried again, still nothing. Force quit, cleared data, tried again. Soft reset, tried again, nothing. Held power button for a reset, still nothing. Powered off and back on again, still nothing. Another soft reset, still nothing. Tried 3 other camera apps, Google Camera closed immediately with a similar error message, Vignette just sat there at Initializing Camera forever, and some garbage front camera only selfie app opened but only showed a black screen for the viewfinder.
I did another soft reset, still nothing.
I did a factory reset, and tried again without downloading any of the apps previously installed. Still nothing.
I've tried several more soft resets and cache clears since then.
It's looking more and more like a hardware problem but previous posters in this thread reported fixing similar issues without doing anything to the hardware. It has never been dropped, it has never been wet. It hasn't even been outside in a light drizzle. It's never been sat on, it's never gotten warmer than 109 reported internal temp.
Other than take it to Verizon and whine at them about how the free phone I just got a month ago is a broken piece of crud for no apparent reason or malfeasance on my part (which is probably why they had it on hand to give away, reconditioned my big toe), is there any potential resolution I'm missing that doesn't involve warranty-voiding stuff.
THIS IS PROBABLY THE ANSWER YOU ARE LOOKING FOR!
"Today after a reset, I opened the camera and instead of trying to take a pic I cycled through the flash settings. As soon as I did the interface switched to portrait, (like the phone was held) and it took pics and video like normal!!!!!!!!"
I didn't see you mention that you tried this. It fixed my dna and I never had another issue.
natypes said:
THIS IS PROBABLY THE ANSWER YOU ARE LOOKING FOR!
"Today after a reset, I opened the camera and instead of trying to take a pic I cycled through the flash settings. As soon as I did the interface switched to portrait, (like the phone was held) and it took pics and video like normal!!!!!!!!"
I didn't see you mention that you tried this. It fixed my dna and I never had another issue.
Click to expand...
Click to collapse
I can't even get that far, as soon as I tap the camera icon, the camera app flashes open for a moment then instantly closes with an 'unable to start' message. The odd thing is that every so often, with no rhyme or reason, it will randomly start working just fine, then not work at all for weeks on end.
Of course now it's so broken, even LED Flashlight apps don't detect it as even having a camera.
Hi
anyone else encountering camera failed while using the camera. im kindda dispointed and didnt expect a phone high standard as the s9+ will still have this problem. been using my p20 pro camera for many times and never encounter this kind of error. any suggestion how to avid facing this problem
olygopoly said:
Hi
anyone else encountering camera failed while using the camera. im kindda dispointed and didnt expect a phone high standard as the s9+ will still have this problem. been using my p20 pro camera for many times and never encounter this kind of error. any suggestion how to avid facing this problem
Click to expand...
Click to collapse
Did this just happen out of the blue or has it always happened? Did this just happen after an OTA update?
Did you modify the phone at all (root/etc)... did you power cycle the phone, clear cache partition, try doing the factory data reset the phone?
If software issues can be ruled out then it's very likely a hardware issue. You will have to have the phone serviced.
scottusa2008 said:
Did this just happen out of the blue or has it always happened? Did this just happen after an OTA update?
Did you modify the phone at all (root/etc)... did you power cycle the phone, clear cache partition, try doing the factory data reset the phone?
If software issues can be ruled out then it's very likely a hardware issue. You will have to have the phone serviced.
Click to expand...
Click to collapse
Happen out of the blue. Did happened before the June update and apparently after the June update. Not root. already clear cache but didnt do factory reset.
olygopoly said:
Happen out of the blue. Did happened before the June update and apparently after the June update. Not root. already clear cache but didnt do factory reset.
Click to expand...
Click to collapse
If you do the factory data reset be sure to try the camera at the default settings... Try it a few times to make sure that it works (or doesn't work) more then once. If it works with default settings then make a change to bring it closer to what you had it at before.
Ultimately your trying to see if it is a software issue (a setting) that is causing you the problem. By making small changes here and there you can know which change caused the issue. Making more then one change at a time will make it harder to narrow down the cause.
The Factory Data Reset will hopefully resolve any software related issues on the phone. Try to not use a smart switch backup, it may cause the problem to come back again. I ran into this with my dialer app hanging up on all outgoing calls... FDR without using a smart switch backup worked perfectly, using the smart switch backup just caused the problem with the dialer to happen again.