Hello all,
I successfully flashed the official ICS update and tried to root via Odin. Now my Note wont boot up past the "Samsung" boot screen. Apparently, I flashed a kernel meant for a Gingerbread build. Is there an ICS root kernel yet? If not, how do I reset what Ive done? Thanks :crying:
DannyG213 said:
Hello all,
I successfully flashed the official ICS update and tried to root via Odin. Now my Note wont boot up past the "Samsung" boot screen. Apparently, I flashed a kernel meant for a Gingerbread build. Is there an ICS root kernel yet? If not, how do I reset what Ive done? Thanks :crying:
Click to expand...
Click to collapse
you might have to re-flash...
what most and I have found works....is odin the touch cwm....then flash the super user for root...
I did this and it worked great.
Bottomline you may have re-flash the Offic ICS then perform the above, btw the links you will need are locted in "My Links" in my signature (red) go to the GNote page and look for the touch CWM then put the super user flash zip file and flash that...you will have root on your Offic ICS...kk
Can I get your link for the super user and CWM touch a buddy of mine want his root back on his note and can u brake it down in instructions on how to do this method? I really appreciate that if you can.I haven't been on Samsung device in a while so I wouldn't know what I am doing again on that part for the note.
Sent from my ADR6400L using xda app-developers app
Texas_T-Bolt said:
Can I get your link for the super user and CWM touch a buddy of mine want his root back on his note and can u brake it down in instructions on how to do this method? I really appreciate that if you can.I haven't been on Samsung device in a while so I wouldn't know what I am doing again on that part for the note.
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
get samsung drivers on my page, intall them on your pc/computer.
http://forum.xda-developers.com/showthread.php?t=1584576
From CWM OP:
Download the odin "file">>>>2012-04-14 (odin) off the above link and the "odin program" see attached on this post.
Take the attached odin program on this post of mine...put in a folder...upzip and put this (odin file that is on the link above in the same folder)
How to install:
Odin (this will increase the flash counter)
- put your phone into download mode >>>>>>hold the volume down and power button....then once you get the download info volume up like it says...you will see the green android...you are in download mode, plug in your phone open odin program
- in odin program choose pda, and select the .tar.md5 file (that you put in the odin folder) and flash/ hit start button....
http://forum.xda-developers.com/showthread.php?t=1581185
Then once you have CWM, download this file super user from above and put on your phones internal sd and flash it, to get into CWM, but first put file on the phone inter sd....power off phone...completely.
Hold the volume buttons and power buttons all at the same time....when you see the samsung logo let go of the power button only...keeping both volumes button down...then you will see blue cmw...just go to the intern sd find your super user file flash it...since this touch cwm you can touch the sceen and use the soft keys on the phone, ...the back button...after flash, just reboot..and you have root.
http://forum.xda-developers.com/showthread.php?t=1581185
Mr. Joe you should just copy-paste these instructions and make a stickie. I think this is the 500th time I've seen it explained.
rangercaptain said:
Mr. Joe you should just copy-paste these instructions and make a stickie. I think this is the 500th time I've seen it explained.
Click to expand...
Click to collapse
Lol so true....but no worries..
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Root question Follow-up
bigjoe2675,
Thanks for all your help. After I failed to flash back to Gengerbread, I brought it back to AT&T and had it exchanged for a new phone.I have since upgraded to ICS and everything is running fine.
I would like to root it "correctly" this time and am trying to figure out where I should pick up from your instructions. Should I simple flash the .tar.md5 file and and use superflash? I guess Im confused as to what superflash does.
Thanks
DannyG213 said:
bigjoe2675,
Thanks for all your help. After I failed to flash back to Gengerbread, I brought it back to AT&T and had it exchanged for a new phone.I have since upgraded to ICS and everything is running fine.
I would like to root it "correctly" this time and am trying to figure out where I should pick up from your instructions. Should I simple flash the .tar.md5 file and and use superflash? I guess Im confused as to what superflash does.
Thanks
Click to expand...
Click to collapse
I have those listed also in the GNote super page...see green arrow on that page
what I did was odin to get touch cwm, then I flashed the super user zip...
super user will give you root...
see those links under the green arrow on the GNote Super thread, k
http://forum.xda-developers.com/showpost.php?p=28040353&postcount=1
bigjoe2675 said:
I have those listed also in the GNote super page...see green arrow on that page
what I did was odin to get touch cwm, then I flashed the super user zip...
super user will give you root...
see those links under the green arrow on the GNote Super thread, k
http://forum.xda-developers.com/showpost.php?p=28040353&postcount=1
Click to expand...
Click to collapse
Thanks again. I followed the instrcutions from you link and am happily rooted.
DannyG213 said:
Thanks again. I followed the instrcutions from you link and am happily rooted.
Click to expand...
Click to collapse
your welcome sir
also can you change your title to SOLVED, thx
Stuck and cant do anything
bigjoe2675 said:
you might have to re-flash...
what most and I have found works....is odin the touch cwm....then flash the super user for root...
I did this and it worked great.
Bottomline you may have re-flash the Offic ICS then perform the above, btw the links you will need are locted in "My Links" in my signature (red) go to the GNote page and look for the touch CWM then put the super user flash zip file and flash that...you will have root on your Offic ICS...kk
Click to expand...
Click to collapse
Hi guys, i have the same issue. I tried to root my bell galaxy i717 with the pda file. Everything went well until i got stuck in samsung logo. I tried some other files , like touch cwm tar but nothing change. Is there anyone who can give me a big help.
Anything!
I'm trying to fix a friend's note(sgh-i717r) and it won't boot into recovery. When pressing the button combo, it just keeps vibrating and when I let go its stuck on the samsung logo. All I can do with it is go into download mode and connect with odin. How can I get to at least boot so he can actually use the phone?
Related
Okay so Im trying to flash a rom, I have rooted it with super one click method. Im trying to flash a rom.
Usually in all the other phones that I have rooted and flashed sensation mt4g g2 g2x you root it then simply move on to CWM then you flash a recovery. It seems like the recovery isnt sticking..
I have looked for guides on how to flash. But a lot of them say there outdated.
Any ways if someone could give me a clue and point me in the right direction that would be lovely thanks!
Jerald2 said:
Okay so Im trying to flash a rom, I have rooted it with super one click method. Im trying to flash a rom.
Usually in all the other phones that I have rooted and flashed sensation mt4g g2 g2x you root it then simply move on to CWM then you flash a recovery. It seems like the recovery isnt sticking..
I have looked for guides on how to flash. But a lot of them say there outdated.
Any ways if someone could give me a clue and point me in the right direction that would be lovely thanks!
Click to expand...
Click to collapse
you need to odin a stock modified kernal.tar in order to get cwm to stick. Here it is:
http://goo.gl/QCYxT
If you need odin and samsung drivers, there in my guide here:
http://forum.xda-developers.com/showthread.php?t=1238070
Remember to only put the file in the PDA function of odin...
Okay thanks very much this odin thing is very different from what I'm used to.
Am I going to extract these files? obviously not drivers, but Odin files I extracted. Am I going to extract the kernal.tar?
I'm trying to install Miui its 2.3.4 so im guessing that other guide is the right one can someone confirm that this is safe?
http://forum.xda-developers.com/showthread.php?t=1212239
Sent from my HTC Sensation 4G using XDA App
Jerald2 said:
Okay thanks very much this odin thing is very different from what I'm used to.
Am I going to extract these files? obviously not drivers, but Odin files I extracted. Am I going to extract the kernal.tar?
I'm trying to install Miui its 2.3.4 so im guessing that other guide is the right one can someone confirm that this is safe?
http://forum.xda-developers.com/showthread.php?t=1212239
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
Yes use that guide
Someone Please please please help. This is my girlfriends phone i finally talked her into letting me root/flash it. Its not going right!!!!
Okay so im following that guide I got to step 4, it said boot up normally. It wouldnt boot up so I kept going.
Got to step 7 and this is what happens. http://www.youtube.com/watch?v=hwQMaQD2x7w
When I first open Clock work it says
E:Cant mount cache/recovery/command
E:Cant mount cache/recovery/Log
E:Cant open cache/recovery/Log
E:Cant mount cache/recovery/Last Log
E:Cant open cache/recovery/Last Log
Someone Please Please help.
edit: your not following the directions clearly... The problem is you continued past step 4 without letting your phone boot up. If you dont follow directions to a T you will brick your phone.
Okay, listen carefully. Go to jt1134's CM7 thread in fascinate development section. Go to the first page, scroll down until you see CWM fixed for CM7, download it. Use Odin to flash full stock ED05 with atlas 2.2 pit file, check the box for repartition, then hit start. Boot up, then power down and take battery out. Flash the CWM fixed for cm7 in Odin, unplug from computer, put battery back in, then (this is important!) hold both volume buttons and the power button until you see Samsung logo, then release. You will then be in the right recovery to flash any MTD ROM. Wipe all three, flash ROM, reboot. Also go to stickies in fascinate development, read "Going from Vanilla GB to anything else" thread. It will give you more details and is properly updated. Good luck!
~~~~There is no spoon~~~~
So where do you suggest I start to get thus thing at least back to stock?
sorry didnt see ya posted there. K I will Give that a shot seriously thank you.
Sent from my HTC Sensation 4G using XDA App
Jerald2 said:
So where do you suggest I start to get thus thing at least back to stock?
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
I gave you the link that provides all that information
---------- Post added at 12:13 PM ---------- Previous post was at 12:12 PM ----------
shag_on_e said:
Okay, listen carefully. Go to jt1134's CM7 thread in fascinate development section. Go to the first page, scroll down until you see CWM fixed for CM7, download it. Use Odin to flash full stock ED05 with atlas 2.2 pit file, check the box for repartition, then hit start. Boot up, then power down and take battery out. Flash the CWM fixed for cm7 in Odin, unplug from computer, put battery back in, then (this is important!) hold both volume buttons and the power button until you see Samsung logo, then release. You will then be in the right recovery to flash any MTD ROM. Wipe all three, flash ROM, reboot. Also go to stickies in fascinate development, read "Going from Vanilla GB to anything else" thread. It will give you more details and is properly updated. Good luck!
~~~~There is no spoon~~~~
Click to expand...
Click to collapse
all that info is in the link i provided for him
here is the going back to stock section in that link I provided.
* How to get back to stock after flashing any rom, follow these steps:
Step 1: Download this stock ed05 rom package by pentafive to your pc. you will need to unzip with 7zip or winrar, http://api.viglink.com/api/click?fo...144787558901&jsonp=vglnk_jsonp_13175749481381
Step 2: power off phone and pull battery
Step 3: open odin on your computer
Step 4: plug in factory usb cable and hold the volume down button. Yellow
triangle should appear saying "download mode"
Step 5: click on PDA in odin and find the vzw_official ed05.tar file(rom) you downloaded to your computer in step 1
Step 6: click on PIT in Odin and select the atlas 2.2 pit, it's in the file you downloaded in step 1
Step 7: click start and wait 5min, box in left hand corner of odin will say PASS, then click reset.
Step 8: unplug usb cable, put battery back in and boot phone.
You are now back to stock ed05.(verizon's latest release for the Fascinate)
shag_on_e said:
2.2 pit file, check the box for repartition, then hit start. Boot up,
Click to expand...
Click to collapse
When you mean boot up, what do you mean like start it normally? The last guide said that and it wouldnt boot up.
Also Is this it? http://forum.xda-developers.com/showthread.php?t=1190668?
That Link you gave me when I click on it. I only get "Parameter 'out' is required." bad link?
you can go back to original link on my first post and get everything there lol, but being the nice guy I am I went ahead and fixed the link.
Alright. So I got followed your guide and got cwm installed. I made a nandroid. I wiped everthing and flashed MIUI It booted up and runs. So im on step 8 on http://forum.xda-developers.com/showthread.php?t=1212239
When I try and install a app it says insufficient storage on device.
Is this because I didnt install ec09-modem.tar.md5 and GBBootloaders.tar?
I know that im not going to need to install Gaps. But I want to make sure these things ^^ up there are the right things for my rom.
I went ahead and risked it haha. It worked. Okay so now.. It says that I dont have root. Would I be okay to use the superone click method again to root it?
Jerald2 said:
Alright. So I got followed your guide and got cwm installed. I made a nandroid. I wiped everthing and flashed MIUI It booted up and runs. So im on step 8 on http://forum.xda-developers.com/showthread.php?t=1212239
When I try and install a app it says insufficient storage on device.
Is this because I didnt install ec09-modem.tar.md5 and GBBootloaders.tar?
I know that im not going to need to install Gaps. But I want to make sure these things ^^ up there are the right things for my rom.
I went ahead and risked it haha. It worked. Okay so now.. It says that I dont have root. Would I be okay to use the superone click method again to root it?
Click to expand...
Click to collapse
power off and pull battery, get back to dl mode, open odin and install the eco9 modem and gb bootloaders. reboot and see if everything is working. If you still dont have root and you may not, follow what directions below.
- superoneclick wont work.
-push this file below to you sd card
- long press the power button and select recovery(do not three finger into recovery once your on a mtd rom)
- install zip from sd like you did the rom.
http://dl.dropbox.com/u/25089906/su-2.3.6.1.x.zip
-you should now have root
Okay Ill do that THANKS SOOOOO MUCH!!
Is Clock work going to stick? Do I need to install rom manager and flash the newest one?
I tried to go into CMW through long press home and click recovery. It says Multiple packages tries to request sytem root permission wich is disabled by default to ensure system security. If you need to enable it, please go to setting in super user.
Witch im not seeing anyting
Jerald2 said:
Okay Ill do that THANKS SOOOOO MUCH!!
Is Clock work going to stick? Do I need to install rom manager and flash the newest one?
Click to expand...
Click to collapse
The kernal is already modified to allow cwm to stick and you should already have the latest kernal with the version of miui that you flashed. Im not a fan of rom manager, but thats just my opinion. Fwiw the only other kernal I would mess with is the glitch kernal. That has to be installed via odin. go into the dev section and look up the glitch kernal thread and read up on it. But before you do any of that, just get the phone up and running for a day, then go from there.
Yeah haha I just need to get root so I can back up her stuff.
But its not letting me get into recovery because it says that I dont have root. How am i supposed to get into it?
Jerald2 said:
Yeah haha I just need to get root so I can back up her stuff.
But its not letting me get into recovery because it says that I dont have root. How am i supposed to get into it?
Click to expand...
Click to collapse
If it won't let u get into cwm by long pressing power button then power phone off and try three finger into recovery(not suppose to do that with a mtd rom tho). Your only other option I know of is:
-odin back to stock
- boot up once then power off
-odin cwmall.tar from my guide
-three finger boot into recovery
-install root.zip from post 14
-reboot then power off
-odin cwm4
-three finger boot into recovery
-install miui.zip from sd
-reboot
-follow directions from step 8 on in the vanilla guide.
SOLVED!!!!
after many hrs of trying to save my phone it finally worked, darkymod is a lifesaver....
thank you so much for responding and helping since i couldnt find a guide for this problem ill make one
hi, so I wanted to root my galaxy s3 gt-i9300 and now its stuck at the Samsung logo
tried to download original firmware to odin it from Samsung-update but says md5 hash invalid...
after browsing for few hrs I found out I suck at browsing :laugh:
My device is bought in Denmark provider 3 *three* so if anyone could please point me in the right direction for working firmware or anotherway to make my galaxy work again, I can still go to download mode so still got hope
Help please
I too have the same problem after searching for a while i can't seem to find were to download the stock firmware for a device bought from KOGAN it arrived from HONG KONG so I guess I need a firmware version compatible with the HONG KONG version. Also do you know where i can find details on how to load the software via odin.
any help greatly appreciated
Andrew
icehanyou said:
hi, so I wanted to root my galaxy s3 gt-i9300 and now its stuck at the Samsung logo
tried to download original firmware to odin it from Samsung-update but says md5 hash invalid...
after browsing for few hrs I found out I suck at browsing :laugh:
My device is bought in Denmark provider 3 *three* so if anyone could please point me in the right direction for working firmware or anotherway to make my galaxy work again, I can still go to download mode so still got hope
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hej fellow Dane
Just follow this guide step by step its excellent and proven always to work
http://forum.xda-developers.com/showthread.php?t=1703488
Then you will have your phone rooted through the kernel and the necessary CWM (recovery) installed - !
After that dl your chosen rom + kernel and reboot into recovery flash rom zip file then kernel zip, reboot and voila welcome to JB 4.1.2
And since you are a newbie (we all were once) i suggest you dont flash through odin/heimdal but only through CWM until you get more experience overall !!
Then you will be ok :laugh:
Suggestion of a very good rom+kernel is >
PA rom > http://forum.xda-developers.com/showthread.php?t=1745003
Yank555 kernel >http://forum.xda-developers.com/showthread.php?t=2006459
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Only other JB compatible kernel we have to S3 right now is Siyah witch is also awesome >
http://forum.xda-developers.com/showthread.php?t=1709686
awesome
spoonymoon said:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hej fellow Dane
Just follow this guide step by step its excellent and proven always to work
http://forum.xda-developers.com/showthread.php?t=1703488
Then you will have your phone rooted through the kernel and the necessary CWM (recovery) installed - !
After that dl your chosen rom + kernel and reboot into recovery flash rom zip file then kernel zip, reboot and voila welcome to JB 4.1.2
And since you are a newbie (we all were once) i suggest you dont flash through odin/heimdal but only through CWM until you get more experience overall !!
Then you will be ok :laugh:
Suggestion of a very good rom+kernel is >
PA rom > http://forum.xda-developers.com/showthread.php?t=1745003
Yank555 kernel >http://forum.xda-developers.com/showthread.php?t=2006459
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Only other JB compatible kernel we have to S3 right now is Siyah witch is also awesome >
http://forum.xda-developers.com/showthread.php?t=1709686
Click to expand...
Click to collapse
I will so much try this!
Tusind tak!
hey spoonymoon
thanks for the reply i am very new to this I assume I just flash the clockwork mod recovery then install the custom rom via clockwork mod quick question is it similar to xrecovery on the sony x10i my old phone.
thanks for your help sorry for newbie questions
Andrew
littlegreenrobot said:
hey spoonymoon
thanks for the reply i am very new to this I assume I just flash the clockwork mod recovery then install the custom rom via clockwork mod quick question is it similar to xrecovery on the sony x10i my old phone.
thanks for your help sorry for newbie questions
Andrew
Click to expand...
Click to collapse
Hi all ok ask away
Yes first clockwork recovery first then boot into cwm (clockwork)then what rom you choose - and i should think its pretty similar to what ever recovery's you've seen, at least in Principe of how it get things done!
You can boot from os to cwm through rooted kernels, by holding power button and choose reboot, that will give you two options to reboot or into recovery (no need for the combo buttons)
Edit: in CWM there´s a menu and one option is install zip from sd card (nternal/external) and then you browse through your sd with volumebutton (or in the new CWM you'll get when flashing a JB kernel a touch recovery - awesome by the way )
Greetz
see the problem I have is I cant do what the steps describe as it requires I turn on my phone and see what build it has, and copy zip files to internal storage....so only option I have I think is odin
icehanyou said:
see the problem I have is I cant do what the steps describe as it requires I turn on my phone and see what build it has, and copy zip files to internal storage....so only option I have I think is odin
Click to expand...
Click to collapse
Ohh yes this way wont do then - you have to get a stock sammyrom with a pit,md5 or sometimes called tar file and make sure you tick repartition in odin before flash - then you will have a working OS and can do the above steps!
Or mayby better her
http://www.darkyrom.com/index.php?threads/darkyrom-iii-v7-0-aroma-android-4-1-2-xxelk4.8301/e Darkys soft is just great
>http://www.sammobile.com/firmware/
But if you havent wrote down what excact firmware you had..you gotta pick the closent match you can think off , thats gonna be ok
Or try find your spcific region code for your country/region
spoonymoon said:
Ohh yes this way wont do then - you have to get a stock sammyrom with a pit,md5 or sometimes called tar file and make sure you tick repartition in odin before flash - then you will have a working OS and can do the above steps!
Or mayby better her
http://www.darkyrom.com/index.php?threads/darkyrom-iii-v7-0-aroma-android-4-1-2-xxelk4.8301/e Darkys soft is just great
>http://www.sammobile.com/firmware/
But if you havent wrote down what excact firmware you had..you gotta pick the closent match you can think off , thats gonna be ok
Or try find your spcific region code for your country/region
Click to expand...
Click to collapse
just making shure, u said click repartition cuz always see warnings that say dont with big red letters
icehanyou said:
just making shure, u said click repartition cuz always see warnings that say dont with big red letters
Click to expand...
Click to collapse
Yes you're right be careful with that, if its necessary, it will be auto ticked when loading the pit file, dont tick it other than guide from dev says so=
But always read the dev´s guide carefully, right
allright downloading hope it works
ok i flashed it with odin with the firmware i downloaded from samsung site, using my region code but still same problem...samsung logo stuck...if i check repartition says failed, cant open some file...but can still open odin
icehanyou said:
ok i flashed it with odin with the firmware i downloaded from samsung site, using my region code but still same problem...samsung logo stuck...if i check repartition says failed, cant open some file...but can still open odin
Click to expand...
Click to collapse
try darky's rom then
finally solved
icehanyou said:
finally solved
Click to expand...
Click to collapse
CONGRATULATIONS BROTHER! Post here what you did?
Sent from my HTC Desire using Xparent ICS Tapatalk 2
icehanyou said:
finally solved
Click to expand...
Click to collapse
Soo great told u Darkyroms were great......Glad to hear
I think you own me to push my thx button :highfive:
To get CWM again do this >
*Installation
1. Download Odin3 and CF-Root-SGS3-vxx.zip
2. Power off your phone
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
Link>http://speedy.sh/kcqvD/CF-Root-SGS3-v6.2.tar
Now you successfully installed CWM + Super User + CWM Manager.
icehanyou said:
finally solved
Click to expand...
Click to collapse
In cooperation with ICEHANYIOU, i promised to say how he unbricked it:
*Installed CWM with ODIN
*threw darky rom on external sd (awesome rom btw)
*flashed the rom with CWM from external sd
*working, unbricked phone.
Sent from my HTC Desire using Tapatalk 2
Can someone please tell me or post links how to unroot..please?? I rooted and put a custom rom but im not happy with the rom and just want to go back to stock..I been searching and haven't had any luck..please help me..I tried the super user unroot and that doesn't work ...I found a few tar files for odin but they don't work either..please attach a link to files and help a gal out please..
File
bernmed2005 said:
Can someone please tell me or post links how to unroot..please?? I rooted and put a custom rom but im not happy with the rom and just want to go back to stock..I been searching and haven't had any luck..please help me..I tried the super user unroot and that doesn't work ...I found a few tar files for odin but they don't work either..please attach a link to files and help a gal out please..
Click to expand...
Click to collapse
Download the file that is located on this link: /docs.google.com/uc?id=0B-4vmAHRoMi-TGlrellrTi1SWXM&export=download
Put your phone in download mode
Connect to Odin
Load the tar file under PDA
and let it do its magic. This will put you back to FULL stock unrooted but will not fix the knox 0x1. Hope it helps.
reply
I tried to download that file but it failed..not sure why..i really want to get it back to stock any other ideas????
uspatel89 said:
Download the file that is located on this link: /docs.google.com/uc?id=0B-4vmAHRoMi-TGlrellrTi1SWXM&export=download
Put your phone in download mode
Connect to Odin
Load the tar file under PDA
and let it do its magic. This will put you back to FULL stock unrooted but will not fix the knox 0x1. Hope it helps.
Click to expand...
Click to collapse
bernmed2005 said:
I tried to download that file but it failed..not sure why..i really want to get it back to stock any other ideas????
Click to expand...
Click to collapse
In the Troubleshooting forum, type in "brick" in the search field. It is hard for me to provide you the links as I am on a restricted account. Throughout those posts you will have to do a lot of digging because when I bricked my Note 3 it took me a few hours to finally find the full .tar for MJ4. Sorry I can't be more help, but if I come across anything else I will def. let you know. Keep me updated if you find the full .tar or not.
Just flash a stock rom instead of what you flashed.
rawdikrik said:
Just flash a stock rom instead of what you flashed.
Click to expand...
Click to collapse
Or that ^^ but try the kernel download from this link for the original tar file: ://samsung-updates.com/details/15741/Galaxy_Note_3_Sprint/SM-N900P/SPR/N900PVPUBMJ4.html
fix the link and add http at the beginning.
The problem is finding the stock rom or file for odin so I can get everything back to when I first got it...
rawdikrik said:
Just flash a stock rom instead of what you flashed.
Click to expand...
Click to collapse
What firmware and baseband are you currently on?
Note 3 or Gear Sent
The baseband is N900PVPUMBMJ4
I am currently on JellyBomb Domination version 1
Note 3
Sprint variant
Why is this suck a mission???? I want back to stock because there's a few apps that don't work with this rom for S PEN Like :action memo, S Note, S health, This rom is disappointing... I had Jellybomb on SG3 and loved it but now it's limiting my phone and just want to go back to stock...
Galaxy gear included....are there any messaging apps for the gear out yet?
ifly4vamerica said:
What firmware and baseband are you currently on?
Note 3 or Gear Sent
Click to expand...
Click to collapse
Go to this thread. http://forum.xda-developers.com/showthread.php?t=2522638 then download Odin 1.85 which is linked later in that thread. Then:
1. Turn off phone
2. Press power home and volume down. When prompted press volume up to get into download mode.
3. Start Odin put the tar in the PDA slot.
4. Plug phone in.
5. When Odin sees the phone press start.
6. Let the process finish then you should be good to go on completely stock MJ4.
Oh and tons of things you can do with the gear. Just go to the cad gear thread. It is on fire with development right now.
Note 3 or Gear Sent
Thank you so muc that helped go back to stock.... https://drive.google.com/file/d/0ByOzlcwB3OjaZDEwU3Y0UW5fN1U/edit?usp=sharing that link will give you the file for odin and BOOM there you go..his helps others ..what a mission..but succeeded...oh yeah thank you sooo much
ifly4vamerica said:
Go to this thread. http://forum.xda-developers.com/showthread.php?t=2522638 then download Odin 1.85 which is linked later in that thread. Then:
1. Turn off phone
2. Press power home and volume down. When prompted press volume up to get into download mode.
3. Start Odin put the tar in the PDA slot.
4. Plug phone in.
5. When Odin sees the phone press start.
6. Let the process finish then you should be good to go on completely stock MJ4.
Oh and tons of things you can do with the gear. Just go to the cad gear thread. It is on fire with development right now.
Note 3 or Gear Sent
Click to expand...
Click to collapse
bernmed2005 said:
Thank you so muc that helped go back to stock.... https://drive.google.com/file/d/0ByOzlcwB3OjaZDEwU3Y0UW5fN1U/edit?usp=sharing that link will give you the file for odin and BOOM there you go..his helps others ..what a mission..but succeeded...oh yeah thank you sooo much
Click to expand...
Click to collapse
You do know that jellybomb is now on the note 3 ands everything works and what Does not work we have a question and Answer thread just for jellybomb and I am running jellybomb rite now and everything works that you mention did not work. . Sure I had to pull apps from the stock rom and replaced a few apps.. But I got every app to work. . And I'm not even on the latest jellybomb I'm on version 2 beta 3.. So I think we everything was fixed in beta version 6.. it's a great rom with a great deal of support.. As I said jellybomb has its own thread for questions and help. .
Sent from my SM-N900P using Xparent Skyblue Tapatalk 2
Where do you get the latest romantic update for jelly bomb ? I'm still a noob when it comes to rooting and rims so I don't know how to do everything I just use the rim and hope everything works...
Sent from my SM-N900P using xda app-developers app
Make sure you do a backup in twrp before you start flashing roms again. That way if it isn't what you wanted you can just do a nandroid restore and fix it in a few minutes. It's always a good idea to have a few fully functional backups on your phone in case you have any issues.
I received this verizon Galaxy Tab 10.1 as a gift and a project, but haven't been able to make any progress.
The tablet was bought from a taxi company that used it was in car entertainment. When booted, an app immediately starts up and removes the navigation bar. If you are fast enough, you can get to the settings and uninstall this app before it starts, or what I have found to be easier, just use shell commands to hit home and uninstall while the app tries to regain control.
The table is currently running 3.2, and cannot update over wifi, nothing happens.
Root was gained by an unknown method, but the SU app won't open up. I can access su through the shell however.
I have tried flashing a cwm recovery through ODIN which says is successful but if it is booted straight to the recovery it is still stock.
Flashing ROM's through ODIN appear to be successful, but just boots right back to the original rom and recovery.
Adding anything to the SD card or anywhere else accessable to the stock recovery does not work either because the SD card is reformatted to the original contents every time.
This also occurs with any apps that are installed, each one is removed when rebooted except for SU. And Rom Manager FC's when CWM is attempting to flash.
nvflash will not work either because the bootloader is locked.
I don't know much about the boot sequence for android, but I looked for any init. files that are out of the ordinary and cannot find anything.
I'm giving this tablet away when I finally figure it out, I just want to fix it. Any help would be awesome and let me know if I've left something out.
Even if no one has any specific suggestions, can someone post a PIT file for a SCH-i905? I have seen the stock firmware that can be flashed through ODIN but it does not stick on my unit.
Thanks!
Excuse my English but my original language is Spanish.
The default verizon tablet brings in recovery an option that reloads the original recovery. If units installed CWM via Odin must access the recovery option (Vol +) on 1st boot and enter the option to leave cmw (reboot) will give you the option of not recovering the recovery.
The other alternative is to flash via odin the original software look it by google "PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE20110704_0708"
in this case the tab stay with the factory version.
if the team does not have SIM must type top left - top right - bottom left, bottom right and then vol + to unlock.
good look
This is the post that you are needing.
http://forum.xda-developers.com/showthread.php?t=1342995
Sent from my SM-N900V using XDA Premium 4 mobile app
i had the same problem but pulling the sim and unlocking as mentioned above helped a lot then went through the whole rooting process through odin and have not had any issues with anything reverting back to stock. only issue now is not very many roms for our model "bummer" all in all still a good droid tablet for what i paid lol if you still havent got it going let me know and i will give you all the directions and steps i used
I have tried installing PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE2011070 4_0708 through Odin3.
I do boot directly into recovery after installing CWM, the stock recovery still persists. I have tried several times because I know sometimes it does not stick.
I have also tried flashing the factory image linked in that xda post "[ROM]EG01 - Factory STOCK ODIN Image - VZW LTE Tab 10.1".
Boots right back up and starts the same taxi cab show case media software it normally does.
One thing I did not note in the first post. I do have root access when the tablet is booted into the os, but I do not when the tablet is in recover. I dont know if this is unusual or not.
I can also install busy box, but have yet to find out his would be useful.
I also do not have access to nvflash, but I think this is normal because the bootloader is not unlocked.
http://forum.xda-developers.com/showthread.php?p=49924392
Might work for you too. This is a post I made in another thread.
Sent from my Nexus 4 using Tapatalk
baystallion said:
http://forum.xda-developers.com/showthread.php?p=49924392
Might work for you too. This is a post I made in another thread.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Awesome, I'll give this a go when I get home.
Was there a p4vzw twrp version some where in those links?
Looks like all of the ones referenced were 3g and wifi only.
Sidenote: I don't care if I keep 4g functionality or not, I will only be using this for wifi, if that makes fixing the problem any easier.
hsbr said:
Was there a p4vzw twrp version some where in those links?
Looks like all of the ones referenced were 3g and wifi only.
Sidenote: I don't care if I keep 4g functionality or not, I will only be using this for wifi, if that makes fixing the problem any easier.
Click to expand...
Click to collapse
Search for infamous AOKP 4.2 thread. I think it has twrp for p4vzw.
Sent from my GT-P7500 using Tapatalk
eushaun99 said:
Search for infamous AOKP 4.2 thread. I think it has twrp for p4vzw.
Sent from my GT-P7500 using Tapatalk
Click to expand...
Click to collapse
I was able to find the thread, thanks!
After downloading the odin flashable twrp, I tried first with Odin3, but it failed. Then I flashed with JOdin, this first pulled a PIT file from the tab then failed to repartition. If I ran it without repartitioning it said it was sucessful, but if I boot straight into recovery the stock android recovery still comes up.
I have a way to get a pit file now though, so that's nice.
hsbr said:
I was able to find the thread, thanks!
After downloading the odin flashable twrp, I tried first with Odin3, but it failed. Then I flashed with JOdin, this first pulled a PIT file from the tab then failed to repartition. If I ran it without repartitioning it said it was sucessful, but if I boot straight into recovery the stock android recovery still comes up.
I have a way to get a pit file now though, so that's nice.
Click to expand...
Click to collapse
Don't use the Odin way. First flash cwm recovery, then flash the twrp zip file.
Sent from my GT-P7500 using Tapatalk
eushaun99 said:
Don't use the Odin way. First flash cwm recovery, then flash the twrp zip file.
Sent from my GT-P7500 using Tapatalk
Click to expand...
Click to collapse
I can't flash CWM in the first place. I have listed all of the different methods I tried flashing CWM with in the OP.
hsbr said:
I can't flash CWM in the first place. I have listed all of the different methods I tried flashing CWM with in the OP.
Click to expand...
Click to collapse
Oh, then I can't help you then. Sorry.
Sent from my GT-P7500 using Tapatalk
hsbr said:
Even if no one has any specific suggestions, can someone post a PIT file for a SCH-i905? I have seen the stock firmware that can be flashed through ODIN but it does not stick on my unit.
Thanks!
Click to expand...
Click to collapse
Yes please i have an issue my tablet got stuck on samsung logo i tried to flash another rom because i cant fing any rom for this tablet US Callular
i905. Tab 2 10.1.
If any one can provide a stock odin or something to make this tablet work i would appreciated?
Hi viewers, i'm sorry if this is a spam thread but i'm kinda of a newbie here... so i'm wanting to root my mega i9205... and i've seen quite several threads on how to root but i'm having trouble on which to follow ... so can anyone kindly direct me to the working and recommended thread for me to root ? Thank you
Depends on your exact phone model and the kinda rom you are running now. More info required.
Ohh... i just want to root but i'm currently on pure stock, out of the box and its a mega 6.3 gt-i9205
vince2709 said:
Ohh... i just want to root but i'm currently on pure stock, out of the box and its a mega 6.3 gt-i9205
Click to expand...
Click to collapse
Hi..you can just use Kingo Root from this thread which is really simple to use, but i see the link for the program is now working again in that post, but you can get the program in my post also here as it will work on your model of the mega and use either the CWM or TWRP recovery from Silesh.Nair post here and in his signature use the downloads link and once on the download site and then select Recoveries via Odin and then select Old and there you can choose either CWM or TWRP recovery to flash with odin (i use Odin 3.07) and flash the .tar file with Odin and check my post here on how to use Odin, hope this helps you out and if you need more help just post.
Just tried it! Thank you so much... it worked like a charm :victory:
vince2709 said:
Just tried it! Thank you so much... it worked like a charm :victory:
Click to expand...
Click to collapse
That is great..and you are welcome. :good:
hi starmaster10... its me, thx again for helping me root my mega anyway i rooted it with that kingo root then i flashed cwm through odin... both worked fine until i realise something... when i go into cwm and i press reboot system, i will get stuck at 1 part which is at the samsung logo after the purple swirly oval thingy... even with me just turning on my phone it gets stuck sometimes and takes me a few times until it actually boots up normally... but when i go reboot from cwm, it confirm gets stuck... and i also do see that 2 red lines when i go to cwm... pls explain to me what i have to know and maybe tell me what i should do... thank u :/
vince2709 said:
hi starmaster10... its me, thx again for helping me root my mega anyway i rooted it with that kingo root then i flashed cwm through odin... both worked fine until i realise something... when i go into cwm and i press reboot system, i will get stuck at 1 part which is at the samsung logo after the purple swirly oval thingy... even with me just turning on my phone it gets stuck sometimes and takes me a few times until it actually boots up normally... but when i go reboot from cwm, it confirm gets stuck... and i also do see that 2 red lines when i go to cwm... pls explain to me what i have to know and maybe tell me what i should do... thank u :/
Click to expand...
Click to collapse
Grab the recovery in Silesh signature or philz touch cause you will needing to use it anyways with the 4.4 ROMs
*2SHAYNEZ*KCCO*
Hi..well first i would do is re-flash the recovery (either the CWM or the TWRP one, depends on which one you use) with odin and uncheck reboot option in odin, but when it is done flashing unplug your device and reboot your device into the recovery right away again as this has to be done in order for the recovery to work properly and from the stock recovery being installed by the device again.
The red lines can be taken away once you have your recovery flashed you have to flash the stock kernel from your rom with odin (recheck the reboot option in odin) which is the boot.img file and it has to be converted to a .tar file to be flashed via odin, you just have to get the stock rom for your region and unpack the zip file and then extract the boot.img file from the rom file which it usually comes as a .tar.md5 file or just a .tar file also. Just use winrar to extract the boot.img file and if you can do this and upload that boot.img file i can convert it for you if you like.
But even if you flash the stock kernel which may take twice to flash to get rid of the two red line when booting up your device, but when you go into recovery mode the two red lines will still be there i believe as your model of the mega is different than mine and my does not show this, only booting recovery in blue shows on my i527m version of the mega..hope this helps you out.
Try the re-flashing of the recovery and see how the phone boots into the rom after that as you might have to clear the Dalvik Cache with the recovery as this sometimes can correct boot problems when clearing this.
Hi starmaster10, shayneflashindaily, thx for all ur help but i've come to a decision to maybe not bring u the trouble to keep helping me, currently i'm still facing that problem with occasional stuck at boot... so i shall just restore back to stock... i just need your help getting me my official firmware which is SINGAPORE XSP OR MM1if that is ok :/ ... my ip doesn't seem to allow me to access to download those links from any site... thank u
vince2709 said:
Hi starmaster10, shayneflashindaily, thx for all ur help but i've come to a decision to maybe not bring u the trouble to keep helping me, currently i'm still facing that problem with occasional stuck at boot... so i shall just restore back to stock... i just need your help getting me my official firmware which is SINGAPORE XSP OR MM1if that is ok :/ ... my ip doesn't seem to allow me to access to download those links from any site... thank u
Click to expand...
Click to collapse
Okay i am downloading the stock rom now and once i get it downloaded and uploaded to my google drive i will post a link to the google drive so you can download then.
vince2709 said:
Hi starmaster10, shayneflashindaily, thx for all ur help but i've come to a decision to maybe not bring u the trouble to keep helping me, currently i'm still facing that problem with occasional stuck at boot... so i shall just restore back to stock... i just need your help getting me my official firmware which is SINGAPORE XSP OR MM1if that is ok :/ ... my ip doesn't seem to allow me to access to download those links from any site... thank u
Click to expand...
Click to collapse
starmaster10 said:
Okay i am downloading the stock rom now and once i get it downloaded and uploaded to my google drive i will post a link to the google drive so you can download then.
Click to expand...
Click to collapse
Update: Okay here is the link for your stock rom MM1-I9205XXUAMH2-20130923180556
Once again... Thank you very much
starmaster10 said:
Hi..you can just use Kingo Root from this thread which is really simple to use, but i see the link for the program is now working again in that post, but you can get the program in my post also here as it will work on your model of the mega and use either the CWM or TWRP recovery from Silesh.Nair post here and in his signature use the downloads link and once on the download site and then select Recoveries via Odin and then select Old and there you can choose either CWM or TWRP recovery to flash with odin (i use Odin 3.07) and flash the .tar file with Odin and check my post here on how to use Odin, hope this helps you out and if you need more help just post.
Click to expand...
Click to collapse
Sorry, this file is infected with a virus
Only the owner is allowed to download infected files.
vince2709 said:
Once again... Thank you very much
Click to expand...
Click to collapse
You are welcome.
artnada said:
Sorry, this file is infected with a virus
Only the owner is allowed to download infected files.
Click to expand...
Click to collapse
Yeah google drive says that but the file is okay, i will have to change the link for that program to their site..darn them...will change that shortly.
Update: Link for the KingoRoot program has now been changed to their site and should be good to go now. :good:
hi again.. just asking, wheres the thread or post where the person showed a list of system apps that can be removed when rooted... im currently on stock and just planning to root not install cwm
vince2709 said:
hi again.. just asking, wheres the thread or post where the person showed a list of system apps that can be removed when rooted... im currently on stock and just planning to root not install cwm
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=48611277&postcount=4