SOLVED!!!!
after many hrs of trying to save my phone it finally worked, darkymod is a lifesaver....
thank you so much for responding and helping since i couldnt find a guide for this problem ill make one
hi, so I wanted to root my galaxy s3 gt-i9300 and now its stuck at the Samsung logo
tried to download original firmware to odin it from Samsung-update but says md5 hash invalid...
after browsing for few hrs I found out I suck at browsing :laugh:
My device is bought in Denmark provider 3 *three* so if anyone could please point me in the right direction for working firmware or anotherway to make my galaxy work again, I can still go to download mode so still got hope
Help please
I too have the same problem after searching for a while i can't seem to find were to download the stock firmware for a device bought from KOGAN it arrived from HONG KONG so I guess I need a firmware version compatible with the HONG KONG version. Also do you know where i can find details on how to load the software via odin.
any help greatly appreciated
Andrew
icehanyou said:
hi, so I wanted to root my galaxy s3 gt-i9300 and now its stuck at the Samsung logo
tried to download original firmware to odin it from Samsung-update but says md5 hash invalid...
after browsing for few hrs I found out I suck at browsing :laugh:
My device is bought in Denmark provider 3 *three* so if anyone could please point me in the right direction for working firmware or anotherway to make my galaxy work again, I can still go to download mode so still got hope
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hej fellow Dane
Just follow this guide step by step its excellent and proven always to work
http://forum.xda-developers.com/showthread.php?t=1703488
Then you will have your phone rooted through the kernel and the necessary CWM (recovery) installed - !
After that dl your chosen rom + kernel and reboot into recovery flash rom zip file then kernel zip, reboot and voila welcome to JB 4.1.2
And since you are a newbie (we all were once) i suggest you dont flash through odin/heimdal but only through CWM until you get more experience overall !!
Then you will be ok :laugh:
Suggestion of a very good rom+kernel is >
PA rom > http://forum.xda-developers.com/showthread.php?t=1745003
Yank555 kernel >http://forum.xda-developers.com/showthread.php?t=2006459
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Only other JB compatible kernel we have to S3 right now is Siyah witch is also awesome >
http://forum.xda-developers.com/showthread.php?t=1709686
awesome
spoonymoon said:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hej fellow Dane
Just follow this guide step by step its excellent and proven always to work
http://forum.xda-developers.com/showthread.php?t=1703488
Then you will have your phone rooted through the kernel and the necessary CWM (recovery) installed - !
After that dl your chosen rom + kernel and reboot into recovery flash rom zip file then kernel zip, reboot and voila welcome to JB 4.1.2
And since you are a newbie (we all were once) i suggest you dont flash through odin/heimdal but only through CWM until you get more experience overall !!
Then you will be ok :laugh:
Suggestion of a very good rom+kernel is >
PA rom > http://forum.xda-developers.com/showthread.php?t=1745003
Yank555 kernel >http://forum.xda-developers.com/showthread.php?t=2006459
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Only other JB compatible kernel we have to S3 right now is Siyah witch is also awesome >
http://forum.xda-developers.com/showthread.php?t=1709686
Click to expand...
Click to collapse
I will so much try this!
Tusind tak!
hey spoonymoon
thanks for the reply i am very new to this I assume I just flash the clockwork mod recovery then install the custom rom via clockwork mod quick question is it similar to xrecovery on the sony x10i my old phone.
thanks for your help sorry for newbie questions
Andrew
littlegreenrobot said:
hey spoonymoon
thanks for the reply i am very new to this I assume I just flash the clockwork mod recovery then install the custom rom via clockwork mod quick question is it similar to xrecovery on the sony x10i my old phone.
thanks for your help sorry for newbie questions
Andrew
Click to expand...
Click to collapse
Hi all ok ask away
Yes first clockwork recovery first then boot into cwm (clockwork)then what rom you choose - and i should think its pretty similar to what ever recovery's you've seen, at least in Principe of how it get things done!
You can boot from os to cwm through rooted kernels, by holding power button and choose reboot, that will give you two options to reboot or into recovery (no need for the combo buttons)
Edit: in CWM there´s a menu and one option is install zip from sd card (nternal/external) and then you browse through your sd with volumebutton (or in the new CWM you'll get when flashing a JB kernel a touch recovery - awesome by the way )
Greetz
see the problem I have is I cant do what the steps describe as it requires I turn on my phone and see what build it has, and copy zip files to internal storage....so only option I have I think is odin
icehanyou said:
see the problem I have is I cant do what the steps describe as it requires I turn on my phone and see what build it has, and copy zip files to internal storage....so only option I have I think is odin
Click to expand...
Click to collapse
Ohh yes this way wont do then - you have to get a stock sammyrom with a pit,md5 or sometimes called tar file and make sure you tick repartition in odin before flash - then you will have a working OS and can do the above steps!
Or mayby better her
http://www.darkyrom.com/index.php?threads/darkyrom-iii-v7-0-aroma-android-4-1-2-xxelk4.8301/e Darkys soft is just great
>http://www.sammobile.com/firmware/
But if you havent wrote down what excact firmware you had..you gotta pick the closent match you can think off , thats gonna be ok
Or try find your spcific region code for your country/region
spoonymoon said:
Ohh yes this way wont do then - you have to get a stock sammyrom with a pit,md5 or sometimes called tar file and make sure you tick repartition in odin before flash - then you will have a working OS and can do the above steps!
Or mayby better her
http://www.darkyrom.com/index.php?threads/darkyrom-iii-v7-0-aroma-android-4-1-2-xxelk4.8301/e Darkys soft is just great
>http://www.sammobile.com/firmware/
But if you havent wrote down what excact firmware you had..you gotta pick the closent match you can think off , thats gonna be ok
Or try find your spcific region code for your country/region
Click to expand...
Click to collapse
just making shure, u said click repartition cuz always see warnings that say dont with big red letters
icehanyou said:
just making shure, u said click repartition cuz always see warnings that say dont with big red letters
Click to expand...
Click to collapse
Yes you're right be careful with that, if its necessary, it will be auto ticked when loading the pit file, dont tick it other than guide from dev says so=
But always read the dev´s guide carefully, right
allright downloading hope it works
ok i flashed it with odin with the firmware i downloaded from samsung site, using my region code but still same problem...samsung logo stuck...if i check repartition says failed, cant open some file...but can still open odin
icehanyou said:
ok i flashed it with odin with the firmware i downloaded from samsung site, using my region code but still same problem...samsung logo stuck...if i check repartition says failed, cant open some file...but can still open odin
Click to expand...
Click to collapse
try darky's rom then
finally solved
icehanyou said:
finally solved
Click to expand...
Click to collapse
CONGRATULATIONS BROTHER! Post here what you did?
Sent from my HTC Desire using Xparent ICS Tapatalk 2
icehanyou said:
finally solved
Click to expand...
Click to collapse
Soo great told u Darkyroms were great......Glad to hear
I think you own me to push my thx button :highfive:
To get CWM again do this >
*Installation
1. Download Odin3 and CF-Root-SGS3-vxx.zip
2. Power off your phone
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
Link>http://speedy.sh/kcqvD/CF-Root-SGS3-v6.2.tar
Now you successfully installed CWM + Super User + CWM Manager.
icehanyou said:
finally solved
Click to expand...
Click to collapse
In cooperation with ICEHANYIOU, i promised to say how he unbricked it:
*Installed CWM with ODIN
*threw darky rom on external sd (awesome rom btw)
*flashed the rom with CWM from external sd
*working, unbricked phone.
Sent from my HTC Desire using Tapatalk 2
Related
Yeah, I know there are threads similar to this one, but I have not found the answer on those, so here is my own.
I was running StarBurst ROM and I decided to flash a faster Kernel, so I used one of Pershoot's Kernels, "AnyKernel" or something like that. Well, afterwards, I rebooted and the boot animation has been replaying over and over again. I can still access Recovery and Download Mode, so I'm wondering if somebody can help me out from there? I think I have learned my lesson, lol... Somebody please respond to this.
if your able to get into the recovery, do you have a backup that you can restore?
joebob1 said:
if your able to get into the recovery, do you have a backup that you can restore?
Click to expand...
Click to collapse
No... This is where I think I messed up... I hope there is another way of doing this.
I'm not too experienced in this area, so wait for more reply's before you do anything, but have you tried flashing the rom again?
joebob1 said:
I'm not too experienced in this area, so wait for more reply's before you do anything, but have you tried flashing the rom again?
Click to expand...
Click to collapse
Understood, thanks for replying though, much appreciated and I would have, but I'm not sure if I can get access to the device's storage through recovery or any other way with it being soft-bricked, I haven't saved the ROM file in storage either.
Have you tried deleting cache and data in recovery mode? try installing a stock rom (basically a stock kernel) and reflash the startburst ROM.
1)FLash via odin (refer first thread for available stock ROMS in developer section)
power+volume down key > right icon
OR
2)Via CWM recovery(accessing internal memory):
If clockworkmod recovery is intact (else flash via ODIn, link first thread developer section)
try adb commandline:
c,d,e:\wherever is adb.exe\adb push firmware.zip /sdcard/
than install the firmware.zip(first thread developer section) by choosing the appropriate option in CWM recovery!
mughalgxt said:
Have you tried deleting cache and data in recovery mode? try installing a stock rom (basically a stock kernel) and reflash the startburst ROM.
Click to expand...
Click to collapse
Yes, I done that right after I realized I was bricked. & I would, but I do not know of a way to gain access to files via computer with my tablet being bricked, do you know of a way?
Sorry, did not see the rest of your post. Can you post that in simpler terms?
CORRECTION<easiest way>:
Download stock rom (search exactly for PDA_SIGNED_P7105.tar.md5)
Flash the ROM with ODIN (you probably know what odin is!)
>to flash with odin enter download mode in tab (power +volume down > left icon selected with left key and confirmed with right volume key)
HURRAY! now flash starburst as you did very first time.
mughalgxt said:
try adb commandline:
c,d,e:\wherever is adb.exe\adb push firmware.zip /sdcard/
than install the firmware.zip(first thread developer section) by choosing the appropriate option in CWM recovery!
Click to expand...
Click to collapse
I agree with Mug. if your familiar with adb this is the method i would try. You can push the 3.1 stock zip to your sd card and it will be there to flash with CWM.
mughalgxt said:
Go to the first thread in developer section (begins as "read/see this first")
Download stock rom with a smiley (first post)
Flash the ROM with ODIN (you probably know what odin is!)
>to flash with odin enter download mode in tab (power +volume down > left icon selected with left key and confirmed with right volume key)
HURRAY! now flash starburst as you did very first time.
Click to expand...
Click to collapse
Can you flash that .zip with Odin? I thought it was CWM only since its not a .tar
CORRECTED THE POST!i THOUGHT IT TO BE A ODIN FLASHABLE ROM
mughalgxt said:
CORRECTION:
Download stock rom (search for PDA_SIGNED_P7105.tar.md5)
Flash the ROM with ODIN (you probably know what odin is!)
>to flash with odin enter download mode in tab (power +volume down > left icon selected with left key and confirmed with right volume key)
HURRAY! now flash starburst as you did very first time.
Click to expand...
Click to collapse
Okay, I mostly understand now. I know what Odin is, but I'm not sure how to flash the ROM through it. I'm looking at it now, where do I put this at? PIT, BOOTLOADER, PDA, PHONE, CSC? & What options do I check?
recheck the rom to be downloaded, its NOT the zip one mentioned before. Once you get the referred rom(PDA_SIGNED_P7105.tar.md5) in corrected post, put it in pda, default selections of odin and start flashing.
Jardicel said:
Okay, I mostly understand now. I know what Odin is, but I'm not sure how to flash the ROM through it. I'm looking at it now, where do I put this at? PIT, BOOTLOADER, PDA, PHONE, CSC? & What options do I check?
Click to expand...
Click to collapse
Sorry my friend. There is no Odin flashable stock rom file yet. I know for a fact a dev by the name of IronHide is working on one. He told me himself it will be ready in a few days.
Are you familiar with adb? Do you have the android sdk on your computer?
There are three stock odin flashables,
1)PDA_SIGNED_P7105.tar.md5
2)STOCK euro (uploaded by me)
3)STOCK arabic (uploaded by me again)
I assert the OP to search and flash the first one as its non touchwiz and native US retail version. The numerical error (7105 for 7510) was made by the original poster who posted the rom.
mughalgxt said:
There are three stock odin flashables,
1)PDA_SIGNED_P7105.tar.md5
2)STOCK euro (uploaded by me)
3)STOCK arabic (uploaded by me again)
Click to expand...
Click to collapse
LOL, sorry, I'm pathetic. Google search PDA_SIGNED_P7105.tar.md5? I haven't found downloads, a link would be nice
FillTheVoid said:
Sorry my friend. There is no Odin flashable stock rom file yet. I know for a fact a dev by the name of IronHide is working on one. He told me himself it will be ready in a few days.
Are you familiar with adb? Do you have the android sdk on your computer?
Click to expand...
Click to collapse
I have heard of adb once, but no, I don't have any Android SDKs on my computer.
you are supposed to use xda search for xda related searches. Anyways,
http://forum.xda-developers.com/showthread.php?t=1119492
mughalgxt said:
you are supposed to use xda search for xda related searches. Anyways,
http://forum.xda-developers.com/showthread.php?t=1119492
Click to expand...
Click to collapse
Haha, sorry for my slowness, and thanks a bunch... I'll see if this works and post back
Hi there, I'm panicking right now.
I just rooted my phone using a tutorial online and it was no problem and everything worked fine after that.
Then I used another tutorial to flash my ROM to CM7 and that's when I started to have problems.
I booted into ClockworkMod Recovery (holding volume up + home + power) and wiped data and chache partition, then I select "Install zip from sdcard" and chose CM7 zip file which I had put on to my sd card, I get a message that installation was successful.
But now I can't access my phone, it's stuck at the Samsung Galaxy SII logo.
I have wiped data again and used Odin to flash a stock ROM on to my phone but it doesn't work.
I need help guys.
EDIT: This post doesn't matter now, there is a new reply at page 3 with new problems.
Did you use a .pit file a repartition when you flashed a stock ROM with ODIN again? What do you mean the phone doesn't work? Does it bootloop or still stuck on the startup logo?
Prasad007 said:
Did you use a .pit file a repartition when you flashed a stock ROM with ODIN again? What do you mean the phone doesn't work? Does it bootloop or still stuck on the startup logo?
Click to expand...
Click to collapse
Well the phone did bootloop at one time and I fixed that by flashing a stock ROM on the phone with Odin, did not use a PIT file.
Now the phone is just stuck on the white Galaxy SII logo and I was hoping that flashing the phone again with stock ROM would also fix that.
I did not use a PIT file for that either.
Please reflash with a stock ROM that contains DBDATA and use a .pit file for repartitioning... That should fix your phone!
Prasad007 said:
Please reflash with a stock ROM that contains DBDATA and use a .pit file for repartitioning... That should fix your phone!
Click to expand...
Click to collapse
Yep!
@OP Download this package : http://hotfile.com/dl/130600047/b70801e/I9100XXKI3.rar.html
And then, in ODIN, put :
.PIT -> PIT
CODE -> PDA
MODEM -> PHONE
CSC -> CSC
Toggle repartition, and those 2 standard ticks. DO NOT TICK ANYTHING ELSE.
That WILL fix your phone Bootloops means that you soft bricked it. Flashing a new ROM + PIT always fixes a bootlooped device.
Prasad007 said:
Please reflash with a stock ROM that contains DBDATA and use a .pit file for repartitioning... That should fix your phone!
Click to expand...
Click to collapse
Could you link to a ROM with a .pit file, have not found any. Thanks!
Also, I tried flashing to CM7 again with ClockworkMod Recovery and it now said:
E:Error in /sdcard/cmgs.zip
(Status 7)
Installation aborted
Is that bad?
The amount of bad advice in this thread is shocking.
Do you actually have an I9100?
My first thought from your original post is that you didn't flash twice in succession, and the flash you did do was practically instant.
Regarding your last post, status 7 is usually when you're trying to flash something not meant for your device.
oinkylicious said:
The amount of bad advice in this thread is shocking.
Do you actually have an I9100?
My first thought from your original post is that you didn't flash twice in succession, and the flash you did do was practically instant.
Regarding your last post, status 7 is usually when you're trying to flash something not meant for your device.
Click to expand...
Click to collapse
I have an I9100 and I got the CyanogenMod from the official website where I chose my device.
The first flash was pretty fast yes.
oinkylicious said:
The amount of bad advice in this thread is shocking.
Do you actually have an I9100?
My first thought from your original post is that you didn't flash twice in succession, and the flash you did do was practically instant.
Regarding your last post, status 7 is usually when you're trying to flash something not meant for your device.
Click to expand...
Click to collapse
Wrong.
10 chars.
Phistachio said:
Yep!
@OP Download this package :
And then, in ODIN, put :
.PIT -> PIT
CODE -> PDA
MODEM -> PHONE
CSC -> CSC
Toggle repartition, and those 2 standard ticks. DO NOT TICK ANYTHING ELSE.
That WILL fix your phone Bootloops means that you soft bricked it. Flashing a new ROM + PIT always fixes a bootlooped device.
Click to expand...
Click to collapse
Thanks man! You saved me!
I was seriously going to stay up all night trying to fix this and skip school tomorrow...
But I still want a custom ROM
Is there a better way than booting into ClockworkMod Recovery and installing zip file from sd card?
Also, any idea about why all this would happen to me? I got all the tutorials on an Icelandic forum where a person with the same phone did exactly what I was going to do and it worked perfectly for him, and I have gone over the steps many times, I did not screw up.
How to flash CM7
1) Flash a kernel with CWM, CF-root will do
2) Download CM7 zip and put it in your internalSD card
3) Boot into CWM
4) Flash CM7 zip
5) Reboot into CWM
6) Flash CM7 zip again
7) wipe cache/data/dalvik cache
6) reboot and wait for upto 10min for it to boot.
You HAVE to flash the CM7 zip twice.
Also you NEVER need to use the .pit, also never tick repartition, a bad flash with repartition ticked is a one way street to hardbrick land.
himmip said:
Thanks man! You saved me!
I was seriously going to stay up all night trying to fix this and skip school tomorrow...
But I still want a custom ROM
Is there a better way than booting into ClockworkMod Recovery and installing zip file from sd card?
Also, any idea about why all this would happen to me? I got all the tutorials on an Icelandic forum where a person with the same phone did exactly what I was going to do and it worked perfectly for him, and I have gone over the steps many times, I did not screw up.
Click to expand...
Click to collapse
Ideally, you:
1. Flash a stock ROM via ODIN
2. Flash CF-Root via ODIN
3. Flash a custom ROM such as CM9 via CWM Recovery
Ok thanks guys!
And just to be sure, I went here: http://www.cyanogenmod.com/devices/samsung-galaxy-s2 and was going to download nightly, or is their anything else you would recommend more?
himmip said:
Ok thanks guys!
And just to be sure, I went here: http://www.cyanogenmod.com/devices/samsung-galaxy-s2 and was going to download nightly, or is their anything else you would recommend more?
Click to expand...
Click to collapse
Only this: http://forum.xda-developers.com/showthread.php?t=1410400
Prasad007 said:
Only this: http://forum.xda-developers.com/showthread.php?t=1410400
Click to expand...
Click to collapse
Not sure if I want experimental ROM, I would also like to be able to restore my apps with Titanium Backup
himmip said:
Not sure if I want experimental ROM, I would also like to be able to restore my apps with Titanium Backup
Click to expand...
Click to collapse
The stable build is much older and actually less stable than the newest nightly.
Also you can restore user apps with titanium backup, just not system apps.
himmip said:
Not sure if I want experimental ROM, I would also like to be able to restore my apps with Titanium Backup
Click to expand...
Click to collapse
You can restore non-system apps, just not their data.
Prasad007 said:
Ideally, you:
1. Flash a stock ROM via ODIN
2. Flash CF-Root via ODIN
3. Flash a custom ROM such as CM9 via CWM Recovery
Click to expand...
Click to collapse
My phone is really starting to annoy me now.
I put a stock ROM on the phone and then flashed CF-Root and when I boot up in CWM and select something it just displays the loading sign and then I hit the power button and I'm back on the main menu of CMW, doesn't matter what I select it only displays the loading sign and it doesn't go away.
It really sucks, I had put all the CM9 files on the SDcard and was ready to go.
EDIT: Never mind guys, finally got it to work Thanks for your help!
himmip said:
My phone is really starting to annoy me now.
I put a stock ROM on the phone and then flashed CF-Root and when I boot up in CWM and select something it just displays the loading sign and then I hit the power button and I'm back on the main menu of CMW, doesn't matter what I select it only displays the loading sign and it doesn't go away.
It really sucks, I had put all the CM9 files on the SDcard and was ready to go.
Click to expand...
Click to collapse
If the Home button doesn't work for you, try selecting with the power button once inside CWM Recovery..
Phistachio said:
That WILL fix your phone Bootloops means that you soft bricked it. Flashing a new ROM + PIT always fixes a bootlooped device.
Click to expand...
Click to collapse
seconded...
Don't panic dude, it happens sometimes Keeping cool is the key to fixing your phone without making it worse than it already is... I can't count the times this has happened to me already, and there ain't nuffin like a good 'ole repartitioning to set things straight (and show the damn contraption who's boss around these here parts.. I hate those stupid machines to whom nobody has ever taught that Man's genius INVARIABLY always triumphs over dumb and inert matter.. )
(although I almost never flash the whole ROM back on : most times flashing the .PIT file and rebooting the device does the trick -unless it's an installed app which caused the trouble in the first place, in which case you're better off starting over from scratch than wasting time trying to debug the problem)
N.B : don't forget to flash the "old bootloader" too, AFTER you've flashed the PIT and rebooted the device (or at least rebooted the recovvery, to check that it boots off a valid partition), I've noticed the new one can give a lot of weird and unpredictable behaviors when used in conjunction with root and a CMx ROM.
---------- Post added at 01:36 PM ---------- Previous post was at 01:28 PM ----------
himmip said:
My phone is really starting to annoy me now.
I put a stock ROM on the phone and then flashed CF-Root and when I boot up in CWM and select something it just displays the loading sign and then I hit the power button and I'm back on the main menu of CMW, doesn't matter what I select it only displays the loading sign and it doesn't go away.
It really sucks, I had put all the CM9 files on the SDcard and was ready to go.
EDIT: Never mind guys, finally got it to work Thanks for your help!
Click to expand...
Click to collapse
I was going to ask : have you flashed the CM rom twice, and flashed the google apps pack BEFORE even rebooting the phone ? It's almost always mandatory to do this precise sequence, the installation routine of the CM ROM is not quite perfect -far from it, actually..
Hello all,
I successfully flashed the official ICS update and tried to root via Odin. Now my Note wont boot up past the "Samsung" boot screen. Apparently, I flashed a kernel meant for a Gingerbread build. Is there an ICS root kernel yet? If not, how do I reset what Ive done? Thanks :crying:
DannyG213 said:
Hello all,
I successfully flashed the official ICS update and tried to root via Odin. Now my Note wont boot up past the "Samsung" boot screen. Apparently, I flashed a kernel meant for a Gingerbread build. Is there an ICS root kernel yet? If not, how do I reset what Ive done? Thanks :crying:
Click to expand...
Click to collapse
you might have to re-flash...
what most and I have found works....is odin the touch cwm....then flash the super user for root...
I did this and it worked great.
Bottomline you may have re-flash the Offic ICS then perform the above, btw the links you will need are locted in "My Links" in my signature (red) go to the GNote page and look for the touch CWM then put the super user flash zip file and flash that...you will have root on your Offic ICS...kk
Can I get your link for the super user and CWM touch a buddy of mine want his root back on his note and can u brake it down in instructions on how to do this method? I really appreciate that if you can.I haven't been on Samsung device in a while so I wouldn't know what I am doing again on that part for the note.
Sent from my ADR6400L using xda app-developers app
Texas_T-Bolt said:
Can I get your link for the super user and CWM touch a buddy of mine want his root back on his note and can u brake it down in instructions on how to do this method? I really appreciate that if you can.I haven't been on Samsung device in a while so I wouldn't know what I am doing again on that part for the note.
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
get samsung drivers on my page, intall them on your pc/computer.
http://forum.xda-developers.com/showthread.php?t=1584576
From CWM OP:
Download the odin "file">>>>2012-04-14 (odin) off the above link and the "odin program" see attached on this post.
Take the attached odin program on this post of mine...put in a folder...upzip and put this (odin file that is on the link above in the same folder)
How to install:
Odin (this will increase the flash counter)
- put your phone into download mode >>>>>>hold the volume down and power button....then once you get the download info volume up like it says...you will see the green android...you are in download mode, plug in your phone open odin program
- in odin program choose pda, and select the .tar.md5 file (that you put in the odin folder) and flash/ hit start button....
http://forum.xda-developers.com/showthread.php?t=1581185
Then once you have CWM, download this file super user from above and put on your phones internal sd and flash it, to get into CWM, but first put file on the phone inter sd....power off phone...completely.
Hold the volume buttons and power buttons all at the same time....when you see the samsung logo let go of the power button only...keeping both volumes button down...then you will see blue cmw...just go to the intern sd find your super user file flash it...since this touch cwm you can touch the sceen and use the soft keys on the phone, ...the back button...after flash, just reboot..and you have root.
http://forum.xda-developers.com/showthread.php?t=1581185
Mr. Joe you should just copy-paste these instructions and make a stickie. I think this is the 500th time I've seen it explained.
rangercaptain said:
Mr. Joe you should just copy-paste these instructions and make a stickie. I think this is the 500th time I've seen it explained.
Click to expand...
Click to collapse
Lol so true....but no worries..
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Root question Follow-up
bigjoe2675,
Thanks for all your help. After I failed to flash back to Gengerbread, I brought it back to AT&T and had it exchanged for a new phone.I have since upgraded to ICS and everything is running fine.
I would like to root it "correctly" this time and am trying to figure out where I should pick up from your instructions. Should I simple flash the .tar.md5 file and and use superflash? I guess Im confused as to what superflash does.
Thanks
DannyG213 said:
bigjoe2675,
Thanks for all your help. After I failed to flash back to Gengerbread, I brought it back to AT&T and had it exchanged for a new phone.I have since upgraded to ICS and everything is running fine.
I would like to root it "correctly" this time and am trying to figure out where I should pick up from your instructions. Should I simple flash the .tar.md5 file and and use superflash? I guess Im confused as to what superflash does.
Thanks
Click to expand...
Click to collapse
I have those listed also in the GNote super page...see green arrow on that page
what I did was odin to get touch cwm, then I flashed the super user zip...
super user will give you root...
see those links under the green arrow on the GNote Super thread, k
http://forum.xda-developers.com/showpost.php?p=28040353&postcount=1
bigjoe2675 said:
I have those listed also in the GNote super page...see green arrow on that page
what I did was odin to get touch cwm, then I flashed the super user zip...
super user will give you root...
see those links under the green arrow on the GNote Super thread, k
http://forum.xda-developers.com/showpost.php?p=28040353&postcount=1
Click to expand...
Click to collapse
Thanks again. I followed the instrcutions from you link and am happily rooted.
DannyG213 said:
Thanks again. I followed the instrcutions from you link and am happily rooted.
Click to expand...
Click to collapse
your welcome sir
also can you change your title to SOLVED, thx
Stuck and cant do anything
bigjoe2675 said:
you might have to re-flash...
what most and I have found works....is odin the touch cwm....then flash the super user for root...
I did this and it worked great.
Bottomline you may have re-flash the Offic ICS then perform the above, btw the links you will need are locted in "My Links" in my signature (red) go to the GNote page and look for the touch CWM then put the super user flash zip file and flash that...you will have root on your Offic ICS...kk
Click to expand...
Click to collapse
Hi guys, i have the same issue. I tried to root my bell galaxy i717 with the pda file. Everything went well until i got stuck in samsung logo. I tried some other files , like touch cwm tar but nothing change. Is there anyone who can give me a big help.
Anything!
I'm trying to fix a friend's note(sgh-i717r) and it won't boot into recovery. When pressing the button combo, it just keeps vibrating and when I let go its stuck on the samsung logo. All I can do with it is go into download mode and connect with odin. How can I get to at least boot so he can actually use the phone?
Hi viewers, i'm sorry if this is a spam thread but i'm kinda of a newbie here... so i'm wanting to root my mega i9205... and i've seen quite several threads on how to root but i'm having trouble on which to follow ... so can anyone kindly direct me to the working and recommended thread for me to root ? Thank you
Depends on your exact phone model and the kinda rom you are running now. More info required.
Ohh... i just want to root but i'm currently on pure stock, out of the box and its a mega 6.3 gt-i9205
vince2709 said:
Ohh... i just want to root but i'm currently on pure stock, out of the box and its a mega 6.3 gt-i9205
Click to expand...
Click to collapse
Hi..you can just use Kingo Root from this thread which is really simple to use, but i see the link for the program is now working again in that post, but you can get the program in my post also here as it will work on your model of the mega and use either the CWM or TWRP recovery from Silesh.Nair post here and in his signature use the downloads link and once on the download site and then select Recoveries via Odin and then select Old and there you can choose either CWM or TWRP recovery to flash with odin (i use Odin 3.07) and flash the .tar file with Odin and check my post here on how to use Odin, hope this helps you out and if you need more help just post.
Just tried it! Thank you so much... it worked like a charm :victory:
vince2709 said:
Just tried it! Thank you so much... it worked like a charm :victory:
Click to expand...
Click to collapse
That is great..and you are welcome. :good:
hi starmaster10... its me, thx again for helping me root my mega anyway i rooted it with that kingo root then i flashed cwm through odin... both worked fine until i realise something... when i go into cwm and i press reboot system, i will get stuck at 1 part which is at the samsung logo after the purple swirly oval thingy... even with me just turning on my phone it gets stuck sometimes and takes me a few times until it actually boots up normally... but when i go reboot from cwm, it confirm gets stuck... and i also do see that 2 red lines when i go to cwm... pls explain to me what i have to know and maybe tell me what i should do... thank u :/
vince2709 said:
hi starmaster10... its me, thx again for helping me root my mega anyway i rooted it with that kingo root then i flashed cwm through odin... both worked fine until i realise something... when i go into cwm and i press reboot system, i will get stuck at 1 part which is at the samsung logo after the purple swirly oval thingy... even with me just turning on my phone it gets stuck sometimes and takes me a few times until it actually boots up normally... but when i go reboot from cwm, it confirm gets stuck... and i also do see that 2 red lines when i go to cwm... pls explain to me what i have to know and maybe tell me what i should do... thank u :/
Click to expand...
Click to collapse
Grab the recovery in Silesh signature or philz touch cause you will needing to use it anyways with the 4.4 ROMs
*2SHAYNEZ*KCCO*
Hi..well first i would do is re-flash the recovery (either the CWM or the TWRP one, depends on which one you use) with odin and uncheck reboot option in odin, but when it is done flashing unplug your device and reboot your device into the recovery right away again as this has to be done in order for the recovery to work properly and from the stock recovery being installed by the device again.
The red lines can be taken away once you have your recovery flashed you have to flash the stock kernel from your rom with odin (recheck the reboot option in odin) which is the boot.img file and it has to be converted to a .tar file to be flashed via odin, you just have to get the stock rom for your region and unpack the zip file and then extract the boot.img file from the rom file which it usually comes as a .tar.md5 file or just a .tar file also. Just use winrar to extract the boot.img file and if you can do this and upload that boot.img file i can convert it for you if you like.
But even if you flash the stock kernel which may take twice to flash to get rid of the two red line when booting up your device, but when you go into recovery mode the two red lines will still be there i believe as your model of the mega is different than mine and my does not show this, only booting recovery in blue shows on my i527m version of the mega..hope this helps you out.
Try the re-flashing of the recovery and see how the phone boots into the rom after that as you might have to clear the Dalvik Cache with the recovery as this sometimes can correct boot problems when clearing this.
Hi starmaster10, shayneflashindaily, thx for all ur help but i've come to a decision to maybe not bring u the trouble to keep helping me, currently i'm still facing that problem with occasional stuck at boot... so i shall just restore back to stock... i just need your help getting me my official firmware which is SINGAPORE XSP OR MM1if that is ok :/ ... my ip doesn't seem to allow me to access to download those links from any site... thank u
vince2709 said:
Hi starmaster10, shayneflashindaily, thx for all ur help but i've come to a decision to maybe not bring u the trouble to keep helping me, currently i'm still facing that problem with occasional stuck at boot... so i shall just restore back to stock... i just need your help getting me my official firmware which is SINGAPORE XSP OR MM1if that is ok :/ ... my ip doesn't seem to allow me to access to download those links from any site... thank u
Click to expand...
Click to collapse
Okay i am downloading the stock rom now and once i get it downloaded and uploaded to my google drive i will post a link to the google drive so you can download then.
vince2709 said:
Hi starmaster10, shayneflashindaily, thx for all ur help but i've come to a decision to maybe not bring u the trouble to keep helping me, currently i'm still facing that problem with occasional stuck at boot... so i shall just restore back to stock... i just need your help getting me my official firmware which is SINGAPORE XSP OR MM1if that is ok :/ ... my ip doesn't seem to allow me to access to download those links from any site... thank u
Click to expand...
Click to collapse
starmaster10 said:
Okay i am downloading the stock rom now and once i get it downloaded and uploaded to my google drive i will post a link to the google drive so you can download then.
Click to expand...
Click to collapse
Update: Okay here is the link for your stock rom MM1-I9205XXUAMH2-20130923180556
Once again... Thank you very much
starmaster10 said:
Hi..you can just use Kingo Root from this thread which is really simple to use, but i see the link for the program is now working again in that post, but you can get the program in my post also here as it will work on your model of the mega and use either the CWM or TWRP recovery from Silesh.Nair post here and in his signature use the downloads link and once on the download site and then select Recoveries via Odin and then select Old and there you can choose either CWM or TWRP recovery to flash with odin (i use Odin 3.07) and flash the .tar file with Odin and check my post here on how to use Odin, hope this helps you out and if you need more help just post.
Click to expand...
Click to collapse
Sorry, this file is infected with a virus
Only the owner is allowed to download infected files.
vince2709 said:
Once again... Thank you very much
Click to expand...
Click to collapse
You are welcome.
artnada said:
Sorry, this file is infected with a virus
Only the owner is allowed to download infected files.
Click to expand...
Click to collapse
Yeah google drive says that but the file is okay, i will have to change the link for that program to their site..darn them...will change that shortly.
Update: Link for the KingoRoot program has now been changed to their site and should be good to go now. :good:
hi again.. just asking, wheres the thread or post where the person showed a list of system apps that can be removed when rooted... im currently on stock and just planning to root not install cwm
vince2709 said:
hi again.. just asking, wheres the thread or post where the person showed a list of system apps that can be removed when rooted... im currently on stock and just planning to root not install cwm
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=48611277&postcount=4
hi hoping someone can help. i have a samsung galaxy s2 i was trying my hand at rooting but now the phone wont do anything but reboot. i even bout one of those jigs. i can get it into download mode i install odin then a kernal i have also an official s2 firmware but no matter what i do it will only reboot constant anyone any ideas or suggestions cheers in advance and if iv cocked up on the tread i appologise in advance
the donkey said:
hi hoping someone can help. i have a samsung galaxy s2 i was trying my hand at rooting but now the phone wont do anything but reboot. i even bout one of those jigs. i can get it into download mode i install odin then a kernal i have also an official s2 firmware but no matter what i do it will only reboot constant anyone any ideas or suggestions cheers in advance and if iv cocked up on the tread i appologise in advance
Click to expand...
Click to collapse
Do you mean you can't even get into recovery? If it can, I would think a data wipe might get the ROM to be able to boot.
the donkey said:
hi hoping someone can help. i have a samsung galaxy s2 i was trying my hand at rooting but now the phone wont do anything but reboot. i even bout one of those jigs. i can get it into download mode i install odin then a kernal i have also an official s2 firmware but no matter what i do it will only reboot constant anyone any ideas or suggestions cheers in advance and if iv cocked up on the tread i appologise in advance
Click to expand...
Click to collapse
You might want to double check if you are using the right version of recovery that kernel is fully supported with your ROM. For example, if you are trying to install a KK ROM using an old version of CWM you will end up in error 7 or end up in a boot loop screen. My words are pretty mess up but I hope you get what I mean. So make sure you have the right version that match each other (recovery, kernel, ROM).
Hope that helps.
im new to all of this. when i hold the home button the power button and the vol down button i get a screen telling me installing a custom os could be bad press up to continue i do this and install even the official software but when it reboots it keeps looping on the samsung logo
cglegion said:
You might want to double check if you are using the right version of recovery that kernel is fully supported with your ROM. For example, if you are trying to install a KK ROM using an old version of CWM you will end up in error 7 or end up in a boot loop screen. My words are pretty mess up but I hope you get what I mean. So make sure you have the right version that match each other (recovery, kernel, ROM).
Hope that helps.
Click to expand...
Click to collapse
i cant access the phone to see what kernal was on it so i am just trying to get it back to normal
the donkey said:
i cant access the phone to see what kernal was on it so i am just trying to get it back to normal
Click to expand...
Click to collapse
I suggest you flash a working recovery via odin first. Look for TWRP, it's the best newbie-friendly recovery or try CWM if you are looking for more advanced options. After that, flash a stock or custom ROM to get your phone back working. Make sure they are compatible with each other. Why didn't it work when you try flashing the stock firmware via odin? Make sure the zip file is downloaded properly.
Hope that helps.
cglegion said:
I suggest you flash a working recovery via odin first. Look for TWRP, it's the best newbie-friendly recovery or try CWM if you are looking for more advanced options. After that, flash a stock or custom ROM to get your phone back working. Make sure they are compatible with each other. Why didn't it work when you try flashing the stock firmware via odin? Make sure the zip file is downloaded properly.
Hope that helps.
Click to expand...
Click to collapse
that sounds excellent but being new and a bit thick what is a twrp and where would i get one?
still no joy
ok so now i have tried 3 official samsung roms h3g o2 and t mobile the h3g installs but just keeps looping the boot screen the o2 failed and the t mobile installes but all i get is a blck screen but it showes the batter the clock and the usb conection i can also go into it through my computer but it wont boot up properly. is it possible to get a samsung rom thats not network based?
the donkey said:
ok so now i have tried 3 official samsung roms h3g o2 and t mobile the h3g installs but just keeps looping the boot screen the o2 failed and the t mobile installes but all i get is a blck screen but it showes the batter the clock and the usb conection i can also go into it through my computer but it wont boot up properly. is it possible to get a samsung rom thats not network based?
Click to expand...
Click to collapse
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
il give it a go
cglegion said:
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
Click to expand...
Click to collapse
il try that just now cheers
ahhh my heed
cglegion said:
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
Click to expand...
Click to collapse
ok so i downloaded the romnuke and the neatrom the instructions say... Boot into Recovery
- Install RomNuke (Does all clean & backup your android folder as well) - Thanks to Hawkerpaul
- Install ROM
- Reboot & Enjoy
but when i unzip the files i cant see any way of gettong romnuke to work i tried odin but it doesnt pick it up is there some other download i need??
still no joy
cglegion said:
It seems like you have broken files. Make sure those firmwares are for the right model of your phone. Are you using I9100 or I9100G? Is your phone still under warranty? What do you mean by not network based? I think it's time you head on to NeatROM JB 4.1.2 Aroma and flash that to your phone. It's way better than the stock one from Samsung. If you don't know how, read the instructions from the OP.
Hope that helps.
Click to expand...
Click to collapse
ok so i put the zip files on an sd card and put it in the phone. but when i try and install them it says ignature verification failed also if i try and wipe the date and retore it says faild to mount/efs invalid argument. when i manage to get the t mobile rom to load the screen is black but i can get the swipe down screen to turn on blue tooth or wifi
the donkey said:
ok so i put the zip files on an sd card and put it in the phone. but when i try and install them it says ignature verification failed also if i try and wipe the date and retore it says faild to mount/efs invalid argument. when i manage to get the t mobile rom to load the screen is black but i can get the swipe down screen to turn on blue tooth or wifi
Click to expand...
Click to collapse
This error is most probably because you don't have the right Rom for the right model or not compatible hence the verification error. Are you doing this in recovery mode? Make sure you follow the installation instructions properly and download the right one for your phone model. Just try cyanogenmod for starter. Installation is easy to understand.
still no joy
cglegion said:
This error is most probably because you don't have the right Rom for the right model or not compatible hence the verification error. Are you doing this in recovery mode? Make sure you follow the installation instructions properly and download the right one for your phone model. Just try cyanogenmod for starter. Installation is easy to understand.
Click to expand...
Click to collapse
ok so i went to cyanogenmod downloaded the newest file for the s2 when i did unzip i get 2 folder meta-inf and system plus a boot.img file. i burned the boot file to a disc but when i check it the disk is empty even though i can see its burned. also when i go to sammobile to get firmare it says no files available...therte must be some way of getting this to work H E L PPPPPPPPPPP
Dude, you're not supposed to be burning anything to discs. The zip file is what the recovery uses to install from. It should include the custom kernal too.
Copy the zipped ROM file to your SD card, put it in your phone and boot into recovery. Assuming you've already flashed the latest custom recovery CWM or TWRP (I prefer TWRP)
From here, to be safe, do a full wipe (That's everything except sd-card: system, data, cache, dalvik-cache)
Now you install/flash the zip file via recovery. Hopefully that completes without error. After that clear cache and dalvik-cache again just to be sure (I do this out of habit)
Reboot.
Hope this helps. I saw you mention something about "efs" and that gives me a bad feeling, read something about needing to back that up before bad things happen. But anyway, good luck :good: