Hello all. I just got my SE X10 befor i had a SE X8 i had i unlocked and flashed whit CWM to CM7.2. Now i wanted to instal Cyanogen Mod 7.2 on my new X10 but as far as i got was to root the phone whit SOC and instal xRecovery 0.3 GB whit the apk. Now my problem starts i cant install any ROM tryed several tutorials i found on xda but nothing helped. Getting this error:
E: Can't mount /dev/block/mmcblk-p1 (or /dev/block/mmcbkl0)
(Device or resource busy)
E: Can't mount /sdcard
Tried some how tos i found including deleting creating and chmoding the sdcard folder but nithing.
Whne i boot to xRecovery and go directly to mount mass storage device and connect the phone to the PC i hear a sound that a new device is connected but i dont see the SD card.
Is there a way to instal CWM on the X10 i know its not supported but some peaple managed to install it and works fine but cant finde any good tutorial.
click fix permissions to get root access to mount sd card
Jurasek88 said:
Hello all. I just got my SE X10 befor i had a SE X8 i had i unlocked and flashed whit CWM to CM7.2. Now i wanted to instal Cyanogen Mod 7.2 on my new X10 but as far as i got was to root the phone whit SOC and instal xRecovery 0.3 GB whit the apk. Now my problem starts i cant install any ROM tryed several tutorials i found on xda but nothing helped. Getting this error:
E: Can't mount /dev/block/mmcblk-p1 (or /dev/block/mmcbkl0)
(Device or resource busy)
E: Can't mount /sdcard
Tried some how tos i found including deleting creating and chmoding the sdcard folder but nithing.
Whne i boot to xRecovery and go directly to mount mass storage device and connect the phone to the PC i hear a sound that a new device is connected but i dont see the SD card.
Is there a way to instal CWM on the X10 i know its not supported but some peaple managed to install it and works fine but cant finde any good tutorial.
Click to expand...
Click to collapse
my man first of all open seus->support->update phone->repair phone written in red color->and then click next and choose ur phone and then do as it says....
this would install the stock rom and all and hopefully correct ur problem.... then here is the guide go here and u can intall any rom unlock bootloader and all....
http://forum.xda-developers.com/showthread.php?t=928343
if u get stuck anywhere always there to help mate
Devin-J: Tried that but got the same error
rohit25: Made that as well 2 times flashed stock FW whit SESU then ROOT whit SOC installed bussybox + xRecovery 0.3 apk but got the same error as mentiond befor
Just a quick one is it even posibel to instal Cyanogen Mod 7.2 whyt xRecovery ? tried to use this ROMs all whit same result
http://forum.xda-developers.com/showthread.php?t=911364
and
http://forum.xda-developers.com/showthread.php?t=1295089
perhaps im doing somthing wrong im wery new to x10 and never used xRecovery had CWM on my x10min and x8 usingi always MiniCM7
Jurasek88 said:
Devin-J: Tried that but got the same error
rohit25: Made that as well 2 times flashed stock FW whit SESU then ROOT whit SOC installed bussybox + xRecovery 0.3 apk but got the same error as mentiond befor
Just a quick one is it even posibel to instal Cyanogen Mod 7.2 whyt xRecovery ? tried to use this ROMs all whit same result
http://forum.xda-developers.com/showthread.php?t=911364
and
http://forum.xda-developers.com/showthread.php?t=1295089
perhaps im doing somthing wrong im wery new to x10 and never used xRecovery had CWM on my x10min and x8 usingi always MiniCM7
Click to expand...
Click to collapse
mate a friend of mine installed cm7.2 thru xrecovery so it works for sure...
again flash the kernel then boot to cwm recovery using flashtool and then wipe everthing cache partition dalvik cache factory reset nd all... then click install zip from sdcard....
also make sure you dont hae any password installed on the sdcrd wich cud be blocking access
rohit25: I didnot flash kernel for x10 BL shold be unlock but im not sure can i check it some how? Got the phone from a friend he did some tweeks but restored it fo factory whit SESU befor i got it. And can u give me a link for a cernel i need to use so that i cen get CWM an install MC7 ? I found a load of ROMs bud no kernel files and i dont know what kernel i need fot the x10. For the X8 a X10mini there was just one kernel from nAa so had no problems identifiing what kernel to use
Edit: And wold you be so kinde to give me some info on what rom do i download from CM http://fiberupload.com/users/jerpelea ? There are several folders whit several files i dont know which to use, what is the diferenc in them? an where do i get the FXP kernel adeqat to the rom i will download ?
Can anyone provide me whit the link for a FXP kernel i need to run the CM7.2 RC3 ? I found some links on the official cyanogen site but the links are dead and i dontk know what kernel ill need so that ill have CWM an i could install CM 7.2.
Jurasek88 said:
Hello all. I just got my SE X10 befor i had a SE X8 i had i unlocked and flashed whit CWM to CM7.2. Now i wanted to instal Cyanogen Mod 7.2 on my new X10 but as far as i got was to root the phone whit SOC and instal xRecovery 0.3 GB whit the apk. Now my problem starts i cant install any ROM tryed several tutorials i found on xda but nothing helped. Getting this error:
E: Can't mount /dev/block/mmcblk-p1 (or /dev/block/mmcbkl0)
(Device or resource busy)
E: Can't mount /sdcard
Tried some how tos i found including deleting creating and chmoding the sdcard folder but nithing.
Whne i boot to xRecovery and go directly to mount mass storage device and connect the phone to the PC i hear a sound that a new device is connected but i dont see the SD card.
Is there a way to instal CWM on the X10 i know its not supported but some peaple managed to install it and works fine but cant finde any good tutorial.
Click to expand...
Click to collapse
Hey, guy, download http://www.mediafire.com/?pnpvpg3cj4gvf0n,after that follow my step
1.rename xRecovery0.3_GBReady.zip to update.zip
2.BOOT INto xRecovery
3.choose install update.zip
4.Done!
After that u cn install whatever ROM u wan
Hope help
Superman™
Sent from my X10i using xda premium
Getting back the same error
E: Can't mount /dev/block/mmcblk-p1 (or /dev/block/mmcbkl0)
(Device or resource busy)
E: Can't mount /sdcard
Jurasek88 said:
Getting back the same error
E: Can't mount /dev/block/mmcblk-p1 (or /dev/block/mmcbkl0)
(Device or resource busy)
E: Can't mount /sdcard
Click to expand...
Click to collapse
After install update.zip from sd card, reboot it and reboot into xRecovery, try it
Hope help
Superman™
Sent from my X10i using xda premium
Remember, just put it in sd card, dn put in any file, then just rename it to update.zip, install update.zip in xRecovery
Sent from my X10i using xda premium
But the update.zip wont instal from xrecovery i get this error whit all zip files.. :-(
Sent from my X10 using xda app-developers app
Jurasek88 said:
But the update.zip wont instal from xrecovery i get this error whit all zip files.. :-(
Sent from my X10 using xda app-developers app
Click to expand...
Click to collapse
U try what i just gv u?? U have put it at sd card?
Sent from my X10i using xda premium
Hey, here is the file i have help u rename it to update.zip,
Just put in sdcard without any file putting, just outside sd card. Then flash it.
http://db.tt/38z1uNJD
Sent from my X10i using xda premium
Yes tok a empty SD card copyd the file renamed it to update.zim rebooted to xRecovery vent to update zip from sd and got the same error as a get all the time
Jurasek88 said:
Yes tok a empty SD card copyd the file renamed it to update.zim rebooted to xRecovery vent to update zip from sd and got the same error as a get all the time
Click to expand...
Click to collapse
Dn install it from custom.zip.....just it at the xRec main page n choose the 2nd or 3rd one cux i hv forgot which
Sent from my X10i using xda premium
Yes thats what i did but getting the error all the time no mather how i install the update.zip
Jurasek88 said:
Yes thats what i did but getting the error all the time no mather how i install the update.zip
Click to expand...
Click to collapse
Ermmmm, i think the other way just reinstall xRecovery, after that follow my step
Sent from my X10i using xda premium
Look for here http://forum.xda-developers.com/showthread.php?t=859571
Sent from my X10i using xda premium
As i told befor i restored the phone whit SESU 2time ROOTed it instaled xRecovery and evry time i got the same error dont think a third restor will help but ill try later on will update if it helps but im confident it will give me the same error as befor...
Related
Hi, I'm Newb here.
I tried and search before posting, I just don't get it.
XRecovery gives error E:can't open "***.zip" (bad) That kind of thing
happens with every zip then it make the zip archive corrupt.
are you sure? with every zip file? Try redownloading the zip files
Just a thought...
Are you using xrecovery 1.0.0? Many zips still use the old "amend" style scripting, but xrecovery 1.0.0 only supports the new "edify" scripting style. Xrecovery 0.3 and below support "amend" so you could try your zips with 0.3 and hope for the best
Failing that, it might be a corrupt zip, try redownloading it.
Sent from my X10 TripNMiUI-IRIS using XDA Premium App
tried with xrecovery 0.3 and 1.0 with these 2 roms.
http://forum.xda-developers.com/showthread.php?t=911364
http://forum.xda-developers.com/showthread.php?t=947613
I am totally clueless.
you sure you got an x10 and not an x10 mini ?
some with me, same error first post with 2 roms WB e EW
if you have 2.3.3 rom , use xRecovery 0.3 GB Ready
Hi there.
Not sure if I'm retarded or what, but I'm following these instructions:
http://forum.xda-developers.com/showthread.php?t=1192988
xRecovery can't find the .zip file. I've renamed it 'wolf.zip' even, and nothing. Not sure how to progress.. I've searched to no avail.
which directory you put in?
XDA_Bruno said:
which directory you put in?
Click to expand...
Click to collapse
/sdcard/
I've also tried renaming it to update.zip, and putting it in other folders that are visible on xRecovery. Still can't find the actual .zip
Have u tried finding the file on ur comp? Connect ur phone, enable usb storage and browse the card for the file. What I did was made a folder called Gingerbread in the root directory of the sdcard and placed all necessary wolf rom files in there, that way I know exactly where they are everytime. Just a suggestion.
via x10i WB GB v4.0.4 edition
916x10 said:
Have u tried finding the file on ur comp? Connect ur phone, enable usb storage and browse the card for the file. What I did was made a folder called Gingerbread in the root directory of the sdcard and placed all necessary wolf rom files in there, that way I know exactly where they are everytime. Just a suggestion.
via x10i WB GB v4.0.4 edition
Click to expand...
Click to collapse
Yes, that's how I got the file on the SD card to start with. Phone is semi-bricked imo, that might be causing xRecovery to not work properly or something..
TheStickMan said:
Hi there.
Not sure if I'm retarded or what, but I'm following these instructions:
http://forum.xda-developers.com/showthread.php?t=1192988
xRecovery can't find the .zip file. I've renamed it 'wolf.zip' even, and nothing. Not sure how to progress.. I've searched to no avail.
Click to expand...
Click to collapse
Do you have the GB update for xrecover?
Without unlocked bootloader, almost impossible to brick the X10.
Yeah, I ended up using PC companion to bring it up to default ROM, and started again. Mission successful. This time xRecovery worked fine.
As for the -GB update - the link on this forum doesn't work.
Man, I was late, but I think you should try remounting /sdcard. Also, at that time, are you already on SE 2.3.3 GB? If so, what version of xRecovery are you using? You need xRecovery-GB-Ready for it to work properly on 2.3.
Anyway, here's the link to Generic 2.3.3.
http://www.multiupload.com/JEXUAHAZTL
Hzu said:
Man, I was late, but I think you should try remounting /sdcard. Also, at that time, are you already on SE 2.3.3 GB? If so, what version of xRecovery are you using? You need xRecovery-GB-Ready for it to work properly on 2.3.
Anyway, here's the link to Generic 2.3.3.
http://www.multiupload.com/JEXUAHAZTL
Click to expand...
Click to collapse
Yeah, I had stock 2.3.3 GB, rooted. And xRecovery v0.3.
As I said, the one link I found on XDA (and whole internet for that), doesn't work for me. Mediafire link times out or something, can't remember.
Still werid it worked 2nd time..
TheStickMan said:
Hi there.
Not sure if I'm retarded or what, but I'm following these instructions:
http://forum.xda-developers.com/showthread.php?t=1192988
xRecovery can't find the .zip file. I've renamed it 'wolf.zip' even, and nothing. Not sure how to progress.. I've searched to no avail.
Click to expand...
Click to collapse
For your sake I hope you are not retarded .
Are you trying the option install custom.zip or are you selecting the custom zip
?
You must select the file unless the name of the file is actually update.zip, also if the directory of the file has any DOT "." before the name it won't show in there at all.
hi, running GB 2.3.3 baseband 2.1.71 build #3.0.1g.0.75
Using flash tool I rooted and installed xrecovery........that went easy.
So I decided to ugrade to wolf 6.0. this is where it got ugly.
I follwed the instructions to back up. Then Factory Reset (Full wipe)
Wipe Cache Partition
Wipe Dalvik Cache
no problems.
however I cannot load the zip I get this
I get the message E:Catnt mount /dev/block/macblk0p1(or /dev/block/mmcblk0)
(device or resource busy)
E:cant mount sdcard:wolf_experia_6.0.0szip
Installation aborted
Now when I try to load the back up I get the same answer.
Someone suggested formatting the SD card so i tried that. Still no go.
So I have tried this numerous times and continuously get the same message.
Any ideas? Thank you
i_rock69 said:
hi, running GB 2.3.3 baseband 2.1.71 build #3.0.1g.0.75
Using flash tool I rooted and installed xrecovery........that went easy.
So I decided to ugrade to wolf 6.0. this is where it got ugly.
I follwed the instructions to back up. Then Factory Reset (Full wipe)
Wipe Cache Partition
Wipe Dalvik Cache
no problems.
however I cannot load the zip I get this
I get the message E:Catnt mount /dev/block/macblk0p1(or /dev/block/mmcblk0)
(device or resource busy)
E:cant mount sdcard:wolf_experia_6.0.0szip
Installation aborted
Now when I try to load the back up I get the same answer.
Someone suggested formatting the SD card so i tried that. Still no go.
So I have tried this numerous times and continuously get the same message.
Any ideas? Thank you
Click to expand...
Click to collapse
so can u use ur phone and is there any OS installed ?? if yes then jus see whether ur USB debugging is on then try turning it off detach ur usb from phone and try goin into xrecovery and flashing the ROM again !!
Hi, the phone works fine, I tried the above and the same results unfortunately.
Hi
Same, exactly same problem here, when trying to install custom rom (Wolf's) from xrecovery.
cant mount sdcard:wolf_experia_6.0.0s.zip
Installation aborted
I read something with xrecovery 0.3 gb but I have it.
Any solutions?
P.S.
After failing istalling custom rom from xrecovery, I can not boot any more to xrecovery. I had to run SEUS to install stock rom from start.
dsencar said:
Hi
Same, exactly same problem here, when trying to install custom rom (Wolf's) from xrecovery.
cant mount sdcard:wolf_experia_6.0.0s.zip
Installation aborted
I read something with xrecovery 0.3 gb but I have it.
Any solutions?
P.S.
After failing istalling custom rom from xrecovery, I can not boot any more to xrecovery. I had to run SEUS to install stock rom from start.
Click to expand...
Click to collapse
You guys can go to zdizhu's page for the latest xRecovery gb fix, and just use root explorer to copy the files in that zip to the corresponding directories.
Do you mean, manualy copy 4 files from xRecovery-0.3_GBradley.zip to bin and sbin directories, overwriting old ones?
chargemon 1kb
charger 36kb to system/bin
and
sh 402kb
xrecovery.tar 1288kb to system/xbin
dsencar said:
Do you mean, manualy copy 4 files from xRecovery-0.3_GBradley.zip to bin and sbin directories, overwriting old ones?
chargemon 1kb
charger 36kb to system/bin
and
sh 402kb
xrecovery.tar 1288kb to system/xbin
Click to expand...
Click to collapse
Yes
Sent from my X10i using XDA App
Hi,
Why when im start wifi in my x10 its error(mac add:unavailable-ip add:unavailable)..??why..??
Please help me..
Sent from my X10i using XDA App
Mostly this is because that you didn't flash the corresponding wifi module... Which kernel are you on？
Sent from my Xperia X10i using XDA App
There are wifi modules file on Doomlord's kernel post. Flash that viz xrecovery, hope it will work.
Im used TEAM V3.when i flash uses xrecovery it said DEVICE OR RESOURCE BUSY.E:Cant mount sd card.
I dont know why??
sorry,im noobies in android.
Hope senior members help me..
Sent from my X10i using XDA App
have u enabled the option Enable usb debugging option in phone settings or check whether the option Mount Sdcard in Xrec>partition tools is unmounted and data is mounted !!
pablosa said:
Im used TEAM V3.when i flash uses xrecovery it said DEVICE OR RESOURCE BUSY.E:Cant mount sd card.
I dont know why??
sorry,im noobies in android.
Hope senior members help me..
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I had the same problem. For that you have 2 option to resolv.
1. Using flashtool, back on stock 2.1 firmware
2. Search and download from here xRecovery-0.3_GBready.zip. Put it on your SD card ( just in SD, not any folder ), and rename with update.zip. After you do all what you have to do, go into recovery mod and before to flash any custom .zip hit Install update.zip from SD Card. xRecovery will flash the update.zip from you SD. After that....that's all . Now you can flash anything you want.
P.S
If you are to lazy to search go to that link http://www.mediafire.com/?pnpvpg3cj4gvf0n
Good luck
bogddy87 said:
I had the same problem. For that you have 2 option to resolv.
1. Using flashtool, back on stock 2.1 firmware
2. Search and download from here xRecovery-0.3_GBready.zip. Put it on your SD card ( just in SD, not any folder ), and rename with update.zip. After you do all what you have to do, go into recovery mod and before to flash any custom .zip hit Install update.zip from SD Card. xRecovery will flash the update.zip from you SD. After that....that's all . Now you can flash anything you want.
P.S
If you are to lazy to search go to that link http://www.mediafire.com/?pnpvpg3cj4gvf0n
Good luck
Click to expand...
Click to collapse
how do I go back to 2.1 firmware?
I've tried 2nd way but when I flash update it says update zip(bad).
what should I do?
pablosa said:
how do I go back to 2.1 firmware?
I've tried 2nd way but when I flash update it says update zip(bad).
what should I do?
Click to expand...
Click to collapse
Find the right file for your region http://forum.xda-developers.com/showthread.php?t=936733 ( .ftf file ). Download the file and put in firmware folder from flashtool. Power off your phone.Open flash tool, hit FLASH button, chose the recent downloaded file and click "ok". Keep back button pressed ( back button from your phone ), and connect usb cable. Now flashing should begone. That's all.
But remember!!! All usb drivers, pc companion and sdk have to be installed on your pc, before to make all that process.
Good luck. Waiting for good news.
yesss! thank you very much friends.
Your help is very helpful.
now my head is no longer dizzy.
once again, thank you thousand times!
peace..
pablosa said:
yesss! thank you very much friends.
Your help is very helpful.
now my head is no longer dizzy.
once again, thank you thousand times!
peace..
Click to expand...
Click to collapse
I'm glade for you cause everything it's fine.
For every question you will have, here will fine help .
thanks for info.. It help me
I'm trying to install a mod from the online kitchen but all i get is:
Error in /sdcard/mymod.zip
(Status 0)
Installation aborted
Even if i make an other rom, install an other version of CWM or SU or when I try to install it from the internal sd it gives me the same error.
I also tried to flash a different kernel, but no succes.
Any suggestions?
Flash a new CWM and Root kernel.
jje
you might have a corrupted download, redownload the mod.
tried both, didn't work... I also tried to rebuild the mod but still get the error.
I can flash other other zips through cwm...
keijers said:
tried both, didn't work... I also tried to rebuild the mod but still get the error.
I can flash other other zips through cwm...
Click to expand...
Click to collapse
strong suspect is your zip file containing the mod. did you try toggling signature verification?
Are you trying from Kitchen or from CWM..
Place on int.SD and flash manually from CWM,
if other files are flashed then definetely CWM is preventing you afrom a wrong flashing...
i've tried to change my batteryicons with this guide and that works:
http://forum.xda-developers.com/showthread.php?t=1434061
But i want to do it via the UOT kitchen, because i want the lockscreen mod too.
This is what i did:
I've uploaded framework-res, twframework-res, systemui and applied the battery mod and the lockscreen mod, nothing else. Then I clicked submit to kitchen, downloaded the zip and flashed it to my device throuw cwm, and i got error 0.
Should i try other scripting in UOT?
maybe i'm stupid but can it also be that i'm on stock rom (rooted) ics 4.0.3 xen lp7?
Hey,
If you check their official XDA Thread:
http://forum.xda-developers.com/showthread.php?t=990829
You will notice (In the second post: http://forum.xda-developers.com/showpost.php?p=12049814&postcount=2) that it is only compatible with Froyo/Gingerbread Roms.
You can't use it with ICS mate, and this is probably why you are getting the error while trying to flash it.
and what about this line:
Battery mod for ICS roms (NEW!)
i also tried to do the battery mod only, but still get the error
same problem with u
keijers said:
and what about this line:
Battery mod for ICS roms (NEW!)
i also tried to do the battery mod only, but still get the error
Click to expand...
Click to collapse
Even though this is the case all hints include that this is froyo/gingerbread only
Sent from my GT-I9100 using XDA
have you mounted your /system or /data ... ?
once had same problem, this fixed it
CJCord said:
have you mounted your /system or /data ... ?
once had same problem, this fixed it
Click to expand...
Click to collapse
Thank you CJCORD!. i was the same problem and i unmount the /system and install the su!
I'm having the same issue in JB, zip packages that i perfectly installed on GB can't be installed now because of the Status 0
simply go to Mount and Storage option, through CWM and unmount system and data.
Demsee said:
simply go to Mount and Storage option, through CWM and unmount system and data.
Click to expand...
Click to collapse
I can't unmount data, what can I do?
error in sdcard status 0 insatllation aborted pls solve it
am using viwepad 7 and i saw it can run ics.
i downloaded the rom and while verifying package it show error in sdcard status 0 installation aborted..
pls help me out to install ics on viewpad 7.
pls help me to solve this error...
raerosaine11 said:
am using viwepad 7 and i saw it can run ics.
i downloaded the rom and while verifying package it show error in sdcard status 0 installation aborted..
pls help me out to install ics on viewpad 7.
pls help me to solve this error...
Click to expand...
Click to collapse
Hello I am having the same problem, could you solve yours?
Please let me know how did you do.
Regards