Related
ok guys.
i made this : fastboot erase boot -w
reboot
then i connct device to QDL.
QDL Runs and reboots after reboot it reboots as QUALCOMM MSDN DRIVER.
no fatboot no recovery no boot only 3 lights and QUALCOMM mode
any ideas
fastboot erase kills streaks since it's buggy on the streak, your streak is likely dead
i found the solution fit streakflash tool thanks to dj_steve
Did it work? If it did can you post the steps you did?
Normally QDL wont work when bricked with fastboot erase cache, either you found a way to fix it, or it can brick in different ways and some are in fact fixable
First download : STREAK FLASH from streakdroid
Then run QDL TOOL
that is all...
Maybe you are mlikely more lucky then others (including me) you still got QUALCOM DIANOSTIC MODE on.
well you need jtag then. i think you really make a good brick...
Could you advise more detail about JTAG process, what I need to buy, only JTAG cable or JTAG box? how about software? Sorry I am zero knowldge about JTAG, just heard a little bit about it.
If you dont have experience with JTAGging devices you're pretty much on your own with the streak, the JTAG points havnt even been identified yet so you'd have to find them on your own before even attempting to recover that way
Is there other way I can servive my pretty dead streak, even the process is involve teardown, cause I am not in the place cover by DELL service, and also my DELL was out of warrenty since JAN2011.
I see the JTAG announce that they can repaire STREAK dead boot, just start the software, check for update, in the update have a pinout, which I think it should show me how to connect to correct pins.
The problem is I did not find what I should buy from market for JTAGing, can I only a JTAG USB cable, or I need other stuffs. is there any way to download the JTAG software to see how it work first before we buy JTAG equipement.
another issue, I seem to see there are 2 different JTAG equipemts, RIFF-JTAG and ORT-JTAG what is all of that, could someone help me.
Riff Jtag box have all informations. Just update firmware
Recommend StreakFlash first
You are now in contact with the number 1 near bricker of the Dell Streak and I recommend you try Streakflash before you do anything:
http://streakdroid.com/?page_id=15&did=23
Once complete it will come up with blackscreen, no big deal pull the battery re-install and follow the instructions for QDL:
http://streakdroid.com/?page_id=15&did=8
That should get you back to a version that is working and ready to be updated to 1.9.0 or stock 2.2, but you will need to follow 2.2 instructions TO THE LETTER to make it work. Hope this helps.
@vanemburghj,
I could not get my DELL to reconize by PC as Qualcomm Dianostic mode(by using Vol-UP and connect the cable to PC, I have disattached baterry and put it back as instruction in streak flash forum).
SokRatha said:
@vanemburghj,
I could not get my DELL to reconize by PC as Qualcomm Dianostic mode(by using Vol-UP and connect the cable to PC, I have disattached baterry and put it back as instruction in streak flash forum).
Click to expand...
Click to collapse
have you found a solution ?? I am facing the same problem
Ok so i unlocked bootloader with omnius-server free offer, did the testpoint thing correctly, program told me everything went succesfully, now phone won't boot, won't shine a light, won't make a sound. Nothing, computer won't recognize it, only testpoint makes the computer recognize him. Is there any possible solution to unbrick it?
check here.....
http://forum.xda-developers.com/showthread.php?t=1568792
yeh i cant enter flashboot
try here::::::::::: http://forum.xda-developers.com/showthread.php?t=1489971
thanks but i cant enter flashmode, pc wont recognize it. Phone doesnt even vibrates
Hi,what is omnius server?
DRM still working with this way?
Sent from my SK17i using XDA
Same here but i can't enter to flashboot :s
That is why I dont understand what for people usung testpoint method.You probably burn tracks on motherboard doing it wrong.I dont think so you would unbrick it on your own.Best way carry it to some phonemedic in your area.
It is surely got a hard brick if your phone CAN'T enter at least Flashmode...send it to your nearest phone service repair,or official Sony Ericsson shop repair...
Sent from my SK17a using xda premium
this might help you
http://forum.xda-developers.com/showthread.php?t=1466492
if your led blink green for half a second go and have a try with wotan client i was in your situation but i observed for a half a second maybe less that green spark but go a try with wotan!!! this software it was the best in all my cases.
new ftf files
ignore
Ignore post
I recently atempted to flash the SGSII and when I did do it the Aroma installer got stuck at 50% then my phone turned itself off and wont turn back on at all, I cant ever recovery or download mode either ?
What do i do?
Never ever stop a rom installation I was lucky when I first flashed my first rom miui and it took to long
Sent from my PC36100 using xda premium
lreyes said:
Never ever stop a rom installation I was lucky when I first flashed my first rom miui and it took to long
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
I never stopped it, The phone just powered off. :| Is there anyway to fix this?
Seems it hardbricked. If you connect phone to charger, does it show charging animation?
przemcio510 said:
Seems it hardbricked. If you connect phone to charger, does it show charging animation?
Click to expand...
Click to collapse
nope nothing appears and computer doesnt even recognize it.
So your phone is hardbricked. Sorry.
przemcio510 said:
So your phone is hardbricked. Sorry.
Click to expand...
Click to collapse
so what can i do to fix this??
you have to use JTG plug to enter in download mode and ->odin If not - Maybe brick
wont turn back on at all, I cant ever recovery or download mode either
Click to expand...
Click to collapse
supi9, to znaczy że nie może wejść ani w reco ani w download i wcale się nie włącza.
DeanBoro said:
I recently atempted to flash the SGSII and when I did do it the Aroma installer got stuck at 50% then my phone turned itself off and wont turn back on at all, I cant ever recovery or download mode either ?
What do i do?
Click to expand...
Click to collapse
All of your posts up until this thread have been in the Xperia forums... So you're presumably a new Galaxy SII user.
What did you try to flash? (a link would be helpful)
What is the exact model number of the phone you tried to flash? (look on the label under the battery)
But my initial impression agrees with przemcio510. If you get no reaction when trying to power the phone on, nor when plugging it into an AC charger, you've likely bricked the phone, and your only options at this point are to take it somewhere that can JTag it, or go to a Samsung repair center.
supi9 said:
you have to use JTG plug to enter in download mode and ->odin If not - Maybe brick
Click to expand...
Click to collapse
there is no jtg plug
may u mean a USB-JIG or a jtag unit
anyway u can try to pull out the bat. for at least 15 minutes after that plug it back in and see what happens if it does not help try to buy a usb jig on ebay or something other if that also does not work u have a hardbricked device and just a boardreplacement or a jtag unit can save u.
thats the reason why i do not like aroma installer it can lead into serious trouble on exynos galaxy S2 devices
Sent from my GT-I9100 using xda premium
Yes I mean jig
Przemcio ja rozumiem co on pisze, ale po wtyczce podobno czasem sprzęt się podnosi. Napewno mu nie zaszkodzi
Wysłane z mojego GT-I9100 za pomocą Tapatalk
DeanBoro said:
I recently atempted to flash the SGSII and when I did do it the Aroma installer got stuck at 50% then my phone turned itself off and wont turn back on at all, I cant ever recovery or download mode either ?
What do i do?
Click to expand...
Click to collapse
What was your Rom/firmware & kernel info before flashing the new ROM?
Hi,
I've get my girlfriend brother's phone to check - so it is bricked. I do not know how he did this. But phone is not turning on, no led light or sth. But it is known on PC as QHSUSB_DLOADER - I do not have drivers for this mode.
I've tested all methods to get it to flash mode for FlashTool, but it is not working.
Any sugestions?
emm
First, can you explain better how the phone bricked??
have you tried flashing http://forum.xda-developers.com/attachment.php?attachmentid=953586&d=1332104415
extract tft and put it into flashtool/frimwares , then flash it..
if it does not work, then your in troubles.. you may need a medusa box to solve it.
Nachospeicys said:
First, can you explain better how the phone bricked??
have you tried flashing http://forum.xda-developers.com/attachment.php?attachmentid=953586&d=1332104415
extract tft and put it into flashtool/frimwares , then flash it..
if it does not work, then your in troubles.. you may need a medusa box to solve it.
Click to expand...
Click to collapse
I do not know how it was bricked, but he said that, the power on button does not work, after phone died, before it his PC doen not recognise phone, my on my PC phone is known as as mentioned before - I do not have drivers for this strange named device
AFAIK, your phone is permanently bricked. It's loader is corrupted which has caused it to go to factory service mode. You have to take it to Sony service center or have an expert JTAG the phone to recover it. BTW, How did he do this?
Have you tried installing the drivers from flashtool folder and connect it in flashmode?
I think it's hardbricked, too, and you have to take it to sony
prime_225 said:
AFAIK, your phone is permanently bricked. It's loader is corrupted which has caused it to go to factory service mode. You have to take it to Sony service center or have an expert JTAG the phone to recover it. BTW, How did he do this?
Click to expand...
Click to collapse
I do not know how he did this ) I've installed proper drivers for WT19i on FlashTool - no way to flash anything.
Expert JTAG? it is some kind of service box or it is special thing that only Sony service have got?
wiewiorcwaniak said:
Hi,
I've get my girlfriend brother's phone to check - so it is bricked. I do not know how he did this. But phone is not turning on, no led light or sth. But it is known on PC as QHSUSB_DLOADER - I do not have drivers for this mode.
I've tested all methods to get it to flash mode for FlashTool, but it is not working.
Any sugestions?
Click to expand...
Click to collapse
Have you tried to connect the phone to pc while holding the volume up button.........a blue led must glow up
If the phone connects .......that means you can flash a kernel by fastboot method
http://forum.xda-developers.com/showthread.php?t=1322827
JTag cable is now only solution for your mobile.
To look for jtag cable Google it and look for a dealer in your region and call, them they will give you right solution.
Don't worry bro your phone will revive with it as I have revived my phone twice
Sent from my LiveWithWalkman using xda app-developers app
Nachospeicys said:
First, can you explain better how the phone bricked??
have you tried flashing http://forum.xda-developers.com/attachment.php?attachmentid=953586&d=1332104415
extract tft and put it into flashtool/frimwares , then flash it..
if it does not work, then your in troubles.. you may need a medusa box to solve it.
Click to expand...
Click to collapse
you are a expert it work
Strange, It is the 1st time to see a bricked xperia 2011 phone!!
Sent from my Xperia Mini using xda app-developers app
hello
I'm sorry for my english.
My device was hardbrick while hwota was loading, it suddenly closed on 'install update packing' screen. It does not enter fastboot mode. It does not enter Recovery mode. usb seems to be in the device manager. the device does not open at all.
What rom were you trying to flash?
Sent from my ALP-L29 using Tapatalk
royhanks3 said:
What rom were you trying to flash?
Sent from my ALP-L29 using Tapatalk
Click to expand...
Click to collapse
C636-142 To c432-142
There's currently no way to fix it if it's in that state.
DevrimSeven60 said:
C636-142 To c432-142
Click to expand...
Click to collapse
Unfortunately, I think it's bricked for good "for now". Similar thing happened to my Mate 10 (non pro on 134 noxloader rom). Don't spend any money on DC tools to try and fix, right now it's unfixable.
Sent from my ALP-L29 using Tapatalk
DevrimSeven60 said:
hello
I'm sorry for my english.
My device was hardbrick while hwota was loading, it suddenly closed on 'install update packing' screen. It does not enter fastboot mode. It does not enter Recovery mode. usb seems to be in the device manager. the device does not open at all.
Click to expand...
Click to collapse
Hi good day.
I have been following your work from another page, and now in XDA.
I had not read your message, and, I changed the recovery for the stock, and, I was an idiot to close the bootloader.
What happened? Brick simple on my cell phone, did not come out (because I fixed it) of the image of erecovery (EMUI) without tabs or options, a rather rare image.
How do I solve it:
1. I did not enter fastboot, I did not correctly enter the stock recovery (I had deleted the twrp), I had closed the bootloader (my stupidity)
2. Be patient and wait for the battery to run out (wait a day for it).
3. Open cmd and place the command to open the bootloader (fastboot oem unlock) and execute.
4. Put the device in fastboot mode when connecting to the laptop (I did not work several times, the fastboot came out with error FUNC No 10 and NO 2), after numerous attempts and not to let it charge the battery too much (because it was restarted and towards brick in the EMUI logo), correctly enter the fastboot and unlock, when you enter step 3 automatically, it will be executed. I had an advance in removing the cell phone from the brick.
5. It reboots and wonderfully happened to the Rom (that had previously installed), that is to say, the erase was not executed when the bootloader had previously closed.
6. As I had little energy, it was turned off, but I connected it and entered charging mode without restarting (before I did it).
7. Wait for a load of at least 5%, and install the Catuva21 TWRP from the tutorial.
8. I put it by command to restart in fastboot, but I generate error (Error Func No 10 and No 2).
9. I turn off the cell phone and with volume up and power key
10. Enter the TWRP correctly, verify that it is installed.
11. Restart system and log in to the system. I had not deleted anything, but to avoid problems, I hope to load 55% and execute the steps to install the rom.
12. Enjoy and dry spilled tears.
Experience lived and I hope you do not do something that developers do not advise.
Gracias and happy day.
gaduarte7 said:
Hi good day.
I have been following your work from another page, and now in XDA.
I had not read your message, and, I changed the recovery for the stock, and, I was an idiot to close the bootloader.
What happened? Brick simple on my cell phone, did not come out (because I fixed it) of the image of erecovery (EMUI) without tabs or options, a rather rare image.
How do I solve it:
1. I did not enter fastboot, I did not correctly enter the stock recovery (I had deleted the twrp), I had closed the bootloader (my stupidity)
2. Be patient and wait for the battery to run out (wait a day for it).
3. Open cmd and place the command to open the bootloader (fastboot oem unlock) and execute.
4. Put the device in fastboot mode when connecting to the laptop (I did not work several times, the fastboot came out with error FUNC No 10 and NO 2), after numerous attempts and not to let it charge the battery too much (because it was restarted and towards brick in the EMUI logo), correctly enter the fastboot and unlock, when you enter step 3 automatically, it will be executed. I had an advance in removing the cell phone from the brick.
5. It reboots and wonderfully happened to the Rom (that had previously installed), that is to say, the erase was not executed when the bootloader had previously closed.
6. As I had little energy, it was turned off, but I connected it and entered charging mode without restarting (before I did it).
7. Wait for a load of at least 5%, and install the Catuva21 TWRP from the tutorial.
8. I put it by command to restart in fastboot, but I generate error (Error Func No 10 and No 2).
9. I turn off the cell phone and with volume up and power key
10. Enter the TWRP correctly, verify that it is installed.
11. Restart system and log in to the system. I had not deleted anything, but to avoid problems, I hope to load 55% and execute the steps to install the rom.
12. Enjoy and dry spilled tears.
Experience lived and I hope you do not do something that developers do not advise.
Gracias and happy day.
Click to expand...
Click to collapse
Did you have a hard brick on your device? I can not enter Fastboot, we are waiting for board software in China.
Try low battery, do it several times in a row, it has worked for me.
Have it connected to the PC, and with volume - and turn it off forcibly, and, let it restart. At some point you will successfully enter the fastboot, it is patience. Or, leave it to turn off, no load connect to the PC with volume -, and, repeat it until you manage to enter it, can be several times. It has happened to me three times.
I hope it helps you.
Good luck.
:fingers-crossed::fingers-crossed::laugh::laugh::good:
gaduarte7 said:
Try low battery, do it several times in a row, it has worked for me.
Have it connected to the PC, and with volume - and turn it off forcibly, and, let it restart. At some point you will successfully enter the fastboot, it is patience. Or, leave it to turn off, no load connect to the PC with volume -, and, repeat it until you manage to enter it, can be several times. It has happened to me three times.
I hope it helps you.
Good luck.
:fingers-crossed::fingers-crossed::laugh::laugh::good:
Click to expand...
Click to collapse
For Hardbrick, I think these methods will not be the solution.
but thanks.
I'm not sure what's wrong with my friends mate 10. It's stuck on the 4glte screen and the red light blinks. I'm not sure what's wrong or how to fix it. I can't get into fastboot or recovery or download mode.
Any help is appreciated. Thank you.
My problem is still going on. No board software for BLA-L29.
Has this S/W ever been released?
yfaykya said:
Has this S/W ever been released?
Click to expand...
Click to collapse
I did not understand. I have board software file for BLA.
I have a hard brick mate 10 pro. Kirin 970.
Can Funky huawei help me? I have board software but I can not load it.
http://i.hizliresim.com/WDZ3oQ.jpg
DevrimSeven60 said:
I have a hard brick mate 10 pro. Kirin 970.
Can Funky huawei help me? I have board software but I can not load it.
http://i.hizliresim.com/WDZ3oQ.jpg
Click to expand...
Click to collapse
No, FunkyHuawei won't be able to do anything for you unfortunately
Sent from my Mate 10 using Tapatalk
DevrimSeven60 said:
I have a hard brick mate 10 pro. Kirin 970.
Can Funky huawei help me? I have board software but I can not load it.
http://i.hizliresim.com/WDZ3oQ.jpg
Click to expand...
Click to collapse
Can you still access to the erecovery?
Sent from my HUAWEI BKL-L09 using XDA Labs
SADNESS
Hi guys, sorry English.
I'm from Brazil and I also gave a hard brick on my mate 10 pro, so I understood the new updates from May / 2018 could not be done through hwota.
I already did everything of phoenix does not work, I tried to make a cable dongle usb, also did not work.
now I can only cry because it is a device that cost a lot of money and has no solution.
MY original version is BLA-L09
BYE GUYS
felipecps said:
Hi guys, sorry English.
I'm from Brazil and I also gave a hard brick on my mate 10 pro, so I understood the new updates from May / 2018 could not be done through hwota.
I already did everything of phoenix does not work, I tried to make a cable dongle usb, also did not work.
now I can only cry because it is a device that cost a lot of money and has no solution.
MY original version is BLA-L09
Boa dia, eu tb sou do Brasil e estou na mesma situação sendo que o meu é BLA-L29
Click to expand...
Click to collapse
andre_ferreira said:
felipecps said:
Hi guys, sorry English.
I'm from Brazil and I also gave a hard brick on my mate 10 pro, so I understood the new updates from May / 2018 could not be done through hwota.
I already did everything of phoenix does not work, I tried to make a cable dongle usb, also did not work.
now I can only cry because it is a device that cost a lot of money and has no solution.
MY original version is BLA-L09
Boa dia, eu tb sou do Brasil e estou na mesma situação sendo que o meu é BLA-L29
Click to expand...
Click to collapse
Fala cara beleza?!
Nos ferramos, perdi 3 conto...acho que vai demorar muito pra resolver isso.
estava fazendo o rebrand para a nova versão e não sabia que estava brickando....coisa da huawei, agora o porque não sei.
Tentei dc phoenix e o easy firmware nenhum funciona, no site da funkyhuawei não tem solução pra esse brick de tela preta.
acho que ja era cara!!!
Click to expand...
Click to collapse
Guys, it's an English forum, so please keep it that way!