Mate 10 pro ' hard brick ' device manager, usb ser - Huawei Mate 10 Questions & Answers

hello
I'm sorry for my english.
My device was hardbrick while hwota was loading, it suddenly closed on 'install update packing' screen. It does not enter fastboot mode. It does not enter Recovery mode. usb seems to be in the device manager. the device does not open at all.

---

What rom were you trying to flash?
Sent from my ALP-L29 using Tapatalk

---

royhanks3 said:
What rom were you trying to flash?
Sent from my ALP-L29 using Tapatalk
Click to expand...
Click to collapse
C636-142 To c432-142

---

There's currently no way to fix it if it's in that state.

---

DevrimSeven60 said:
C636-142 To c432-142
Click to expand...
Click to collapse
Unfortunately, I think it's bricked for good "for now". Similar thing happened to my Mate 10 (non pro on 134 noxloader rom). Don't spend any money on DC tools to try and fix, right now it's unfixable.
Sent from my ALP-L29 using Tapatalk

---

DevrimSeven60 said:
hello
I'm sorry for my english.
My device was hardbrick while hwota was loading, it suddenly closed on 'install update packing' screen. It does not enter fastboot mode. It does not enter Recovery mode. usb seems to be in the device manager. the device does not open at all.
Click to expand...
Click to collapse
Hi good day.
I have been following your work from another page, and now in XDA.
I had not read your message, and, I changed the recovery for the stock, and, I was an idiot to close the bootloader.
What happened? Brick simple on my cell phone, did not come out (because I fixed it) of the image of erecovery (EMUI) without tabs or options, a rather rare image.
How do I solve it:
1. I did not enter fastboot, I did not correctly enter the stock recovery (I had deleted the twrp), I had closed the bootloader (my stupidity)
2. Be patient and wait for the battery to run out (wait a day for it).
3. Open cmd and place the command to open the bootloader (fastboot oem unlock) and execute.
4. Put the device in fastboot mode when connecting to the laptop (I did not work several times, the fastboot came out with error FUNC No 10 and NO 2), after numerous attempts and not to let it charge the battery too much (because it was restarted and towards brick in the EMUI logo), correctly enter the fastboot and unlock, when you enter step 3 automatically, it will be executed. I had an advance in removing the cell phone from the brick.
5. It reboots and wonderfully happened to the Rom (that had previously installed), that is to say, the erase was not executed when the bootloader had previously closed.
6. As I had little energy, it was turned off, but I connected it and entered charging mode without restarting (before I did it).
7. Wait for a load of at least 5%, and install the Catuva21 TWRP from the tutorial.
8. I put it by command to restart in fastboot, but I generate error (Error Func No 10 and No 2).
9. I turn off the cell phone and with volume up and power key
10. Enter the TWRP correctly, verify that it is installed.
11. Restart system and log in to the system. I had not deleted anything, but to avoid problems, I hope to load 55% and execute the steps to install the rom.
12. Enjoy and dry spilled tears.
Experience lived and I hope you do not do something that developers do not advise.
Gracias and happy day.

---

gaduarte7 said:
Hi good day.
I have been following your work from another page, and now in XDA.
I had not read your message, and, I changed the recovery for the stock, and, I was an idiot to close the bootloader.
What happened? Brick simple on my cell phone, did not come out (because I fixed it) of the image of erecovery (EMUI) without tabs or options, a rather rare image.
How do I solve it:
1. I did not enter fastboot, I did not correctly enter the stock recovery (I had deleted the twrp), I had closed the bootloader (my stupidity)
2. Be patient and wait for the battery to run out (wait a day for it).
3. Open cmd and place the command to open the bootloader (fastboot oem unlock) and execute.
4. Put the device in fastboot mode when connecting to the laptop (I did not work several times, the fastboot came out with error FUNC No 10 and NO 2), after numerous attempts and not to let it charge the battery too much (because it was restarted and towards brick in the EMUI logo), correctly enter the fastboot and unlock, when you enter step 3 automatically, it will be executed. I had an advance in removing the cell phone from the brick.
5. It reboots and wonderfully happened to the Rom (that had previously installed), that is to say, the erase was not executed when the bootloader had previously closed.
6. As I had little energy, it was turned off, but I connected it and entered charging mode without restarting (before I did it).
7. Wait for a load of at least 5%, and install the Catuva21 TWRP from the tutorial.
8. I put it by command to restart in fastboot, but I generate error (Error Func No 10 and No 2).
9. I turn off the cell phone and with volume up and power key
10. Enter the TWRP correctly, verify that it is installed.
11. Restart system and log in to the system. I had not deleted anything, but to avoid problems, I hope to load 55% and execute the steps to install the rom.
12. Enjoy and dry spilled tears.
Experience lived and I hope you do not do something that developers do not advise.
Gracias and happy day.
Click to expand...
Click to collapse
Did you have a hard brick on your device? I can not enter Fastboot, we are waiting for board software in China.

---

Try low battery, do it several times in a row, it has worked for me.
Have it connected to the PC, and with volume - and turn it off forcibly, and, let it restart. At some point you will successfully enter the fastboot, it is patience. Or, leave it to turn off, no load connect to the PC with volume -, and, repeat it until you manage to enter it, can be several times. It has happened to me three times.
I hope it helps you.
Good luck.
:fingers-crossed::fingers-crossed::laugh::laugh::good:

---

gaduarte7 said:
Try low battery, do it several times in a row, it has worked for me.
Have it connected to the PC, and with volume - and turn it off forcibly, and, let it restart. At some point you will successfully enter the fastboot, it is patience. Or, leave it to turn off, no load connect to the PC with volume -, and, repeat it until you manage to enter it, can be several times. It has happened to me three times.
I hope it helps you.
Good luck.
:fingers-crossed::fingers-crossed::laugh::laugh::good:
Click to expand...
Click to collapse
For Hardbrick, I think these methods will not be the solution.
but thanks.

---

I'm not sure what's wrong with my friends mate 10. It's stuck on the 4glte screen and the red light blinks. I'm not sure what's wrong or how to fix it. I can't get into fastboot or recovery or download mode.
Any help is appreciated. Thank you.

---

My problem is still going on. No board software for BLA-L29.

---

Has this S/W ever been released?

---

yfaykya said:
Has this S/W ever been released?
Click to expand...
Click to collapse
I did not understand. I have board software file for BLA.

---

I have a hard brick mate 10 pro. Kirin 970.
Can Funky huawei help me? I have board software but I can not load it.
http://i.hizliresim.com/WDZ3oQ.jpg

---

DevrimSeven60 said:
I have a hard brick mate 10 pro. Kirin 970.
Can Funky huawei help me? I have board software but I can not load it.
http://i.hizliresim.com/WDZ3oQ.jpg
Click to expand...
Click to collapse
No, FunkyHuawei won't be able to do anything for you unfortunately
Sent from my Mate 10 using Tapatalk

---

DevrimSeven60 said:
I have a hard brick mate 10 pro. Kirin 970.
Can Funky huawei help me? I have board software but I can not load it.
http://i.hizliresim.com/WDZ3oQ.jpg
Click to expand...
Click to collapse
Can you still access to the erecovery?
Sent from my HUAWEI BKL-L09 using XDA Labs

---

SADNESS
Hi guys, sorry English.
I'm from Brazil and I also gave a hard brick on my mate 10 pro, so I understood the new updates from May / 2018 could not be done through hwota.
I already did everything of phoenix does not work, I tried to make a cable dongle usb, also did not work.
now I can only cry because it is a device that cost a lot of money and has no solution.
MY original version is BLA-L09
BYE GUYS

---

felipecps said:
Hi guys, sorry English.
I'm from Brazil and I also gave a hard brick on my mate 10 pro, so I understood the new updates from May / 2018 could not be done through hwota.
I already did everything of phoenix does not work, I tried to make a cable dongle usb, also did not work.
now I can only cry because it is a device that cost a lot of money and has no solution.
MY original version is BLA-L09
Boa dia, eu tb sou do Brasil e estou na mesma situação sendo que o meu é BLA-L29
Click to expand...
Click to collapse

---

andre_ferreira said:
felipecps said:
Hi guys, sorry English.
I'm from Brazil and I also gave a hard brick on my mate 10 pro, so I understood the new updates from May / 2018 could not be done through hwota.
I already did everything of phoenix does not work, I tried to make a cable dongle usb, also did not work.
now I can only cry because it is a device that cost a lot of money and has no solution.
MY original version is BLA-L09
Boa dia, eu tb sou do Brasil e estou na mesma situação sendo que o meu é BLA-L29
Click to expand...
Click to collapse
Fala cara beleza?!
Nos ferramos, perdi 3 conto...acho que vai demorar muito pra resolver isso.
estava fazendo o rebrand para a nova versão e não sabia que estava brickando....coisa da huawei, agora o porque não sei.
Tentei dc phoenix e o easy firmware nenhum funciona, no site da funkyhuawei não tem solução pra esse brick de tela preta.
acho que ja era cara!!!
Click to expand...
Click to collapse

---

Guys, it's an English forum, so please keep it that way!