Good day gang,
I was trying to sort out a USB Host problem and from another forum I was following a thread in which they stated to flash a .pit etc etc etc. Last time i do something from another forum. Ive been here since WinMo days....i know better than that....
Well...I've loaded up Odin....got my ROM (Factory) and it would hang on NAND Write Start. From there it would do nothing.
"Tech Support" :silly:
Thanks Mate.
PS- It's a I-9300
Paul_Days said:
Good day gang,
I was trying to sort out a USB Host problem and from another forum I was following a thread in which they stated to flash a .pit etc etc etc. Last time i do something from another forum. Ive been here since WinMo days....i know better than that....
Well...I've loaded up Odin....got my ROM (Factory) and it would hang on NAND Write Start. From there it would do nothing.
"Tech Support" :silly:
Thanks Mate.
PS- It's a I-9300
Click to expand...
Click to collapse
Had that yesterday (only worse, Odin stopped half way during the flash), pull the battery and wait 30 seconds, put back battery and cover. Insert a jig in the phone`s usb port and you`re in downloadmode. Now flash a stock rom with Odin V3 3.0.4.
If you don`t have a jig you could try in manualy (volume down + menu + power button at the same time).If that doesn`twork there are threads on this site to revive your phone after a bad flash, please search for them. Good luck
???
gee2012 said:
Had that yesterday (only worse, Odin stopped half way during the flash), pull the battery and wait 30 seconds, put back battery and cover. Insert a jig in the phone`s usb port and you`re in downloadmode. Now flash a stock rom with Odin V3 3.0.4.
If you don`t have a jig you could try in manualy (volume down + menu + power button at the same time).If that doesn`twork there are threads on this site to revive your phone after a bad flash, please search for them. Good luck
Click to expand...
Click to collapse
I dont have a jig, but I can get the phone in download mode. When I do, I choose in the PDA section my ROM, Reboot and F. Reset Time, and START then this happens:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
From there it hangs.....the usual SYSTEM prompt on the top and the bar which shows progress dont appear.
Do i need to reflash a .pit to revert back?
Paul
Try 2
So I decided to try to flash it without the F. Reset Time option and this is what I got:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
Kies is not running but I checked my PC startup files and there are some Kies managers and such that load on boot....gonna try to disable them....
Still if u guys know how to unbrick, please ring in...
Paul
Should I try a 3 part ROM and Re-Partition? Before bricking I just loadad a PIT by itself.....thats when the phone bricked.....
Paul_Days said:
Should I try a 3 part ROM and Re-Partition? Before bricking I just loadad a PIT by itself.....thats when the phone bricked.....
Click to expand...
Click to collapse
First close everything Kies related, also in the windows traymanager. Rightclick on the bottom windows bar and select taskmanager, there are Kies aplications also and end them. Tick autoreboot and f.reset.time then retry flashing the rom with Odin. You don`t need an extra pit file because it is inside the rom already. Report back after you`re done please.
gee2012 said:
First close everything Kies related, also in the windows traymanager. Rightclick on the bottom windows bar and select taskmanager, there are Kies aplications also and end them. Tick autoreboot and f.reset.time then retry flashing the rom with Odin. You don`t need an extra pit file because it is inside the rom already. Report back after you`re done please.
Click to expand...
Click to collapse
It's a no-go its hangs on NAND write Start!!!
You haw imternational sgs3??
Sent from my GT-I9300 using xda premium
muhamet said:
You haw imternational sgs3??
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Read OP.
Sent from my GT-I9300 using xda premium
nodstuff said:
Read OP.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I believe it is the International Version, the ROM is brazilian if I am not mistaken (I9300XXALF2_I9300OXAALF2_I9300XXLF2). BTW this is a Demo Unit, so I don't have the calling services. But I do remember that when I was inquiring about aftermarket ROMs I found out this one was Brazilian.
So yes, this is the International version.
So you borked your partition table by flashing a .pit? It would probably be a good idea to go one step back and fix your partition table before trying to flash a Rom.
I'm sorry but I have no idea where to find a .pit to return your partitions to the factory state.
Sent from my GT-I9300 using Tapatalk 2
dr.m0x said:
So you borked your partition table by flashing a .pit? It would probably be a good idea to go one step back and fix your partition table before trying to flash a Rom.
I'm sorry but I have no idea where to find a .pit to return your partitions to the factory state.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Me neither....But....I'll search around and see if there is a factory .pit somewhere....also...If I can get another device exactly like mine, can I dump the WHOLE system and flash EVERYTHING (pit, system, etc) onto mine?
???
Paul
Try this link: http://www.mod2xtreme.com/showthread.php?11722-Download-OPS-amp-PIT-files
Sent from my GT-I9300 using Tapatalk 2
torsrex said:
Try this link: http://www.mod2xtreme.com/showthread.php?11722-Download-OPS-amp-PIT-files
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Which do I choose? The latest one? Then how do I this???
Do I run Odin......choose the PIT? click "Re-partition?, select the "PDA" and i9300 image? then Start?
I have no idea what to do....
Take your phone to a service center and tell them something went wrong during a software update.
Verstuurd van mijn GT-I9300 met Tapatalk
gee2012 said:
Take your phone to a service center and tell them something went wrong during a software update.
Verstuurd van mijn GT-I9300 met Tapatalk
Click to expand...
Click to collapse
We don't have one....
PASS!!!
SUCCESS!!!
Moderators PLEASE STICKY!!!
Thanks to torsrex...I did a re-partition to the latest .pit found in that list. Then I selected my factory ROM which I had...
4 mins later... flash.....PASS!!!
In case this happens to a member...here is the simple solution....just hard to find .pit file.
Cheers,
Paul
PS- My system is COMPLETE: no files were lost....wow!
How did you flash the pit??
that is which option did you choose in Odin
Repartition and loaded the file to PDA or Loaded the file in PIT.
Also
Does anyone know how to extract Modem from Stock firmware??
adkamath said:
How did you flash the pit??
that is which option did you choose in Odin
Repartition and loaded the file to PDA or Loaded the file in PIT.
Also
Does anyone know how to extract Modem from Stock firmware??
Click to expand...
Click to collapse
There is a modem thread
Paul_Days said:
SUCCESS!!!
Moderators PLEASE STICKY!!!
Thanks to torsrex...I did a re-partition to the latest .pit found in that list. Then I selected my factory ROM which I had...
4 mins later... flash.....PASS!!!
In case this happens to a member...here is the simple solution....just hard to find .pit file.
Cheers,
Paul
PS- My system is COMPLETE: no files were lost....wow!
Click to expand...
Click to collapse
Hello,
Is your Galaxy S3 with internal 16Gb card?
Thanks in adavance.
[]'s
Related
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Sbl.bin
I flashed rom through Odin and its return is like this.
The Sbl.bin is likely to be related to the bootloader.
I cannot access to the recovery or normally reboot.
What can I do?? I tried flashing for several times.
Zillions of thanks if you guys can help me!!!!
What is your device?
aceofclubs said:
What is your device?
Click to expand...
Click to collapse
i9100 of course.
superfan' said:
i9100 of course.
Click to expand...
Click to collapse
Why did you start a new thread? You already had a perfectly good thread going for the same problem here: http://forum.xda-developers.com/showthread.php?p=24175814.
And you've apparently decided to ignore all the advice in that thread that said to flash back to a stock GINGERBREAD firmware, since you again are trying to flash LPQ, which is one of the earlier ICS releases.
superfan' said:
i9100 of course.
Click to expand...
Click to collapse
Not of course. Because the problem you describe is what happens when you try to flash I9100 firmware on a model like I9100G or others that are called SGS2 but are different hardware. Only true way to tell is read the sticker under the battery.
Anyway forget this thread and take the advice in the other thread and report back there.
Good luck.
ctomgee said:
Why did you start a new thread? You already had a perfectly good thread going for the same problem here: http://forum.xda-developers.com/showthread.php?p=24175814.
And you've apparently decided to ignore all the advice in that thread that said to flash back to a stock GINGERBREAD firmware, since you again are trying to flash LPQ, which is one of the earlier ICS releases.
Click to expand...
Click to collapse
I tried to flash KI3, the gingerbread, it still fails. I think it is a new problem, and it is related to the NAND rw corruption mentioned by others. Therefore, I started a new post but not ignoring others' advice.
If you can help me with my problem, zillions of thanks then.
Flash a stock GB rom and see what happens .
jje
Given you say you've tried everything suggested, and given you think it's a bootloader issue, there are literally dozens and dozens of posts on here about same.
Do a Google search (rather than using XDA search), and append 'XDA' to whatever your search terms are.
This problem you're having is not common, and you're not going to find a fix easily for this (as you're discovering) short of having it JTAG'd or sending it to a Samsung service center.
Is samsung customer service accepted to handle this, even i have some custom binary no?
Or if i pay some money, they wll fix that for me??
Sent from my GT-P7500 using XDA
Yep. They'll fix it, but you'll more than likely end up paying for it. A JTAG repair might be a cheaper option. Here's one in the US, I'm sure there are many others around the world (maybe near you, search Google).
Can you still enter download-mode (Vol. down + Home Button + Power Button)? If so, you can try these steps in this Guide here
Be careful with Re-Partition..i ruined my device some days ago with it after try to fix nand rw corruption.
I have tried all of those before. But i even can't flash things through. Even vthe kernel, recovery and bootloaders.
Sent from my GT-P7500 using XDA
So when you try to flash a 3-Part Firmware (without Re-Partition) it stucked again?
PS: Be very careful .. I has a very similar problem and with Re-Partition I shoot it up -.- (http://forum.xda-developers.com/showthread.php?p=24115788#post24115788)
What have you done to shoot it up??
I stucked even i flashed a three part firware without repartition and pit file
Sent from my GT-P7500 using XDA
Hey,
I'm sorry but i didn't solve the problem for me. With "shoot it up" I mean "i killed my phone". Sorry for that mistake!
I followed the guide too but at first step I flashed with Re-Partition and PIT file. Odin stucked at "Partitioning" so after 10min I closed Odin and restart S2...after that my device was completly dead. Screen stays black. Sorry don't know how to fix it. My S2 is on the way to rapaircenter now.
Aur0r4 said:
Hey,
I'm sorry but i didn't solve the problem for me. With "shoot it up" I mean "i killed my phone". Sorry for that mistake!
I followed the guide too but at first step I flashed with Re-Partition and PIT file. Odin stucked at "Partitioning" so after 10min I closed Odin and restart S2...after that my device was completly dead. Screen stays black. Sorry don't know how to fix it. My S2 is on the way to rapaircenter now.
Click to expand...
Click to collapse
I can access to the download mode but I can't flash anything through my beloved s2.
I am going to send it to the repair centre, u suggest me to send them to Samsung's or others??
Go into recoverymode and install a rom in ur memory internal or extaernal
Just do that turn off phone...and them volume up+power+home button u will enter in recovery mode not in download mode...now just search the rom ...notice u do this if its rooted... Look if u just put insecure kernel by odin i sugere u take sd card out download a rom by computer to sd card. input again in phone and turn on in recovery mode... i think will works im not responsabile for nothing can happened but im pass the same like i write...tell something
Sent from my GT-I9100 using XDA
Look the guy up say to you a dificult way to do and also u may brick ur phone...u do somethings in odin i just never do...i just saw now otherwise u already fix it if i put this earlier
Sent from my GT-I9100 using XDA
Hi i've had CM9 in my phone for a half year now without any issues, however two days ago i woke up and went to check my phone, it froze and after that i haven't been able to boot it up, it just hungs at the samsung logo with the triangle and all that, so i've been trying to sort out this for two days straight now and i'm getting really sick of this, what i've done so far is:
* tried to flash alot of rom's and such with no success, stucks at: NAND Write Start!!
* tried to flash on a different computer
* tried to flash with different usb ports
Oh and i can't get into the recovery mode, only the download mode.
This is the files i've tried to flash and such to get my phone working again:
Kernel_I9100XXLPH
I9100XXLPQ_I9100HTSLP3_HTS
I9100XWLPG_I9100XXLPX_I9100NEELP4_NEE
I9100XWLPG_I9100XXLPX_I9100NEELP4_HOME.tar
I9100XWLPG_I9100NEELP4_NEE
GT-I9100_Kernel_Gingerbread-supercurio-3
GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4
cm-10-20120927-EXPERIMENTAL-i9100-jb_mali-changmin
cm-10-20120926-NIGHTLY-i9100
cm-9-20120330-ODIN-galaxys2.tar
CF-Root-SGS2_XW_NEE_LPG-v5.5-CWM5
CF-Root-SGS2_XX_OXA_KP8-v5.2-CWM5
GT-I9100_NEE_I9100XWLPD_I9100XXLPW_I9100NEELP4
Please, can anyone try to help me? I can't explain how tired i am of this, i really need and want my phone to work again! Thanks
Emperia said:
Hi i've had CM9 in my phone for a half year now without any issues, however two days ago i woke up and went to check my phone, it froze and after that i haven't been able to boot it up, it just hungs at the samsung logo with the triangle and all that, so i've been trying to sort out this for two days straight now and i'm getting really sick of this, what i've done so far is:
* tried to flash alot of rom's and such with no success, stucks at: NAND Write Start!!
* tried to flash on a different computer
* tried to flash with different usb ports
Oh and i can't get into the recovery mode, only the download mode.
This is the files i've tried to flash and such to get my phone working again:
Kernel_I9100XXLPH
I9100XXLPQ_I9100HTSLP3_HTS
I9100XWLPG_I9100XXLPX_I9100NEELP4_NEE
I9100XWLPG_I9100XXLPX_I9100NEELP4_HOME.tar
I9100XWLPG_I9100NEELP4_NEE
GT-I9100_Kernel_Gingerbread-supercurio-3
GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4
cm-10-20120927-EXPERIMENTAL-i9100-jb_mali-changmin
cm-10-20120926-NIGHTLY-i9100
cm-9-20120330-ODIN-galaxys2.tar
CF-Root-SGS2_XW_NEE_LPG-v5.5-CWM5
CF-Root-SGS2_XX_OXA_KP8-v5.2-CWM5
GT-I9100_NEE_I9100XWLPD_I9100XXLPW_I9100NEELP4
Please, can anyone try to help me? I can't explain how tired i am of this, i really need and want my phone to work again! Thanks
Click to expand...
Click to collapse
try flashing a stockfirmware which comes with a .pit file and see
Sun90 said:
try flashing a stockfirmware which comes with a .pit file and see
Click to expand...
Click to collapse
Could you please help me out, i'm not really sure where i can find that.
Edit: I live in Sweden, Europe so i need a nordic firmware.
Emperia said:
Could you please help me out, i'm not really sure where i can find that.
Edit: I live in Sweden, Europe so i need a nordic firmware.
Click to expand...
Click to collapse
check the link below read the main post(#1) of that thread and proceed carefully to revive back ur phone
http://forum.xda-developers.com/showthread.php?t=1457458
Sun90 said:
check the link below read the main post(#1) of that thread and proceed carefully to revive back ur phone
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
Thanks, i've read that guide earlier and tried a few steps with no luck.
Is this what i should do?
"WARNING : FLASHING A BOOTLOADER IS DANGEROUS. FLASH WITH EXTREME CAUTION.
8) Download the Bootloader. Flash it as PDA or Bootloader in ODIN. Without ticking Re-Partitioning
9) Flash the Kernel, as in step 5
10) Flash the recovery package, like in steps 1-4 And that will fix any of your issues "
Emperia said:
Thanks, i've read that guide earlier and tried a few steps with no luck.
Is this what i should do?
"WARNING : FLASHING A BOOTLOADER IS DANGEROUS. FLASH WITH EXTREME CAUTION.
8) Download the Bootloader. Flash it as PDA or Bootloader in ODIN. Without ticking Re-Partitioning
9) Flash the Kernel, as in step 5
10) Flash the recovery package, like in steps 1-4 And that will fix any of your issues "
Click to expand...
Click to collapse
no dont mess with that 'Bootloader' one ma8, there is one on how to use pit file look into that
look for this in that thread
Recovering a soft bricked phone
1) Grab the Recovery Package, and you'll see a bunch of .tar files. Take a look at the names. You'll see CODE, MODEM, CSC and .PIT. Put each one in its place.
2) Turn off your phone. Enter Download mode by presing Volume Down + Home + Power button.
3) Plug in your phone. It will show you, in a yellow box in ODIN, ID:COMx (x being the number displayed, sometimes displays 7, sometimes displays 9)
Now here, take a breath
First try flashing WITHOUT the .PIT and re-partition. And only if it DOESN'T WORK OR FIX then you flash with the .PIT and Re-Partition ticked.
4) Once ready and done all your prayers, press Start. Wait patiently. It usually takes 5 minutes to flash.
Have you done everything correctly until now? Then...
Congratulations on recovering your phone!
Sun90 said:
no dont mess with that 'Bootloader' one ma8, there is one on how to use pit file look into that
Click to expand...
Click to collapse
Hmm, well the only files i got when i downloaded the recovery package via that thread is:
MODEM_I9100XXLPH_REV_02_CL1104396.tar
I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar
I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar
GT-I9100-MULTI-CSC-OXALPH.tar
thanks for trying to help me, it's appreciated!
Emperia said:
Hmm, well the only files i got when i downloaded the recovery package via that thread is:
MODEM_I9100XXLPH_REV_02_CL1104396.tar
I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar
I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar
GT-I9100-MULTI-CSC-OXALPH.tar
thanks for trying to help me, it's appreciated!
Click to expand...
Click to collapse
did u dwnld'd that file under Gingerbread or ICS?
Sun90 said:
did u dwnld'd that file under Gingerbread or ICS?
Click to expand...
Click to collapse
The ICS one, is that wrong?
Emperia said:
The ICS one, is that wrong?
Click to expand...
Click to collapse
yes its correct, The ICS one is the right one for u
now follow the instruction over that thread for where to put those files in ODIN and flash the same
Sun90 said:
yes its correct, The ICS one is the right one for u
now follow the instruction over that thread for where to put those files in ODIN and flash the same
Click to expand...
Click to collapse
Alright, we'll see what happens, there is no pit file thought, correct?
Emperia said:
Alright, we'll see what happens, there is no pit file thought, correct?
Click to expand...
Click to collapse
its only needed in the worst case scenerio
Sun90 said:
its only needed in the worst case scenerio
Click to expand...
Click to collapse
Ah alright, so i should put all those files even the bootloader in odin and try to flash? Just making sure!
Emperia said:
Ah alright, so i should put all those files even the bootloader in odin and try to flash? Just making sure!
Click to expand...
Click to collapse
yes
ps- and remember that u r doing all this thing at ur own risk, do not complain in the Future if something goes wrong there
Sun90 said:
yes
Click to expand...
Click to collapse
This is what happens:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXLPH_REV_02_CL1104396.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXALPH.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
Emperia said:
This is what happens:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXLPH_REV_02_CL1104396.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXALPH.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
Click to expand...
Click to collapse
do u see a red 'fail' message in the big rectangle box in odin
Sun90 said:
do u see a red 'fail' message in the big rectangle box in odin
Click to expand...
Click to collapse
Nope, it just seems like it's stuck, this is what always happens, i never get fail messages or such.
Emperia said:
Nope, it just seems like it's stuck, this is what always happens, i never get fail messages or such.
Click to expand...
Click to collapse
which version of windows ur using is it XP or 7
Sun90 said:
which version of windows ur using is it XP or 7
Click to expand...
Click to collapse
Windows 7, i've tried to flash on windows xp as well, and it gets stuck too, no fail error.
Emperia said:
Windows 7, i've tried to flash on windows xp as well, and it gets stuck too, no fail error.
Click to expand...
Click to collapse
try to reflash using the PIT file att below, extract the file put it in the pit section on odin along with the other files in there respective section also check the re-partition and see
Hi,
About 2 days ago, i've this problem... there is no samsung assistance here! What can I do !????????????????
Arrived at home, put the phone on the charger and went to sleep! When I wake up!? Boot logo!!!
There is no way to enter to recovery mode, only download mode!!!
The status printed when I go into the download mode is a bit strange:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Why is there no product name and why is the system status "custom"? I have not rooted or flashed it yet.
Any suggestions would be much appreciated
Odin output:
<ID:0/05> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLIB_I9300OXFDLI1_I9300XXDLIB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/05> Odin v.3 engine (ID:15)..
<ID:0/05> File analysis..
<ID:0/05> SetupConnection..
<ID:0/05> Initialzation..
<ID:0/05> Get PIT for mapping..
<ID:0/05>
<ID:0/05> There is no PIT partition.
<ID:0/05> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried the MX.PIT file to fix the partition, and it failed too!!!!!!
Please... anyone!!!:crying:
The PIT partition has been damaged .
If you have genuine unrooted Samsung firmware return it to a service centre ..
jje
JJEgan said:
The PIT partition has been damaged .
If you have genuine unrooted Samsung firmware return it to a service centre ..
jje
Click to expand...
Click to collapse
Don't have one here!!!!!
Have to do myself!!!
Help wanted!
BrunoEboli said:
Don't have one here!!!!!
Have to do myself!!!
Help wanted!
Click to expand...
Click to collapse
Take or send it to the shop you bought it from for repair mate
gee2012 said:
Take or send it to the shop you bought it from for repair mate
Click to expand...
Click to collapse
Bought it on the UK... I'm in Brazil!!!
So, thats not possible!
BrunoEboli said:
Bought it on the UK... I'm in Brazil!!!
So, thats not possible!
Click to expand...
Click to collapse
Here is the link to Odin and a couple of pit files https://www.dropbox.com/sh/5k2b4jq4fvkcs9u/3a-R-77qnj. i `am not sure wich pit to use to be honest but i saw a tutorial using this pit file GT-I9300_mx_20120329.PIT.
So flash the firmware you need from www.samfirmware.com/firmware and use the pit file, check repartition, cross your fingers and hope for the best.
gee2012 said:
Here is the link to Odin and a couple of pit files https://www.dropbox.com/sh/5k2b4jq4fvkcs9u/3a-R-77qnj. i `am not sure wich pit to use to be honest but i saw a tutorial using this pit file GT-I9300_mx_20120329.PIT.
So flash the firmware you need from www.samfirmware.com/firmware and use the pit file, check repartition, cross your fingers and hope for the best.
Click to expand...
Click to collapse
Already did that! I came saying there is no pit partition...
When I check de re-partition file the odin came no response ! Last time i leave it for almost 2 hs!
Dont know what to do !
BrunoEboli said:
Already did that! I came saying there is no pit partition...
When I check de re-partition file the odin came no response ! Last time i leave it for almost 2 hs!
Dont know what to do !
Click to expand...
Click to collapse
Call Samsung in Brazil, explain the situation and ask them what to do mate Can`t help you further on this one, good luck mate
I have this exact same problem. If anyone finds an answer let me know too. Is there possibly a way to fix this using ADB?
Read this thread
http://forum.xda-developers.com/showthread.php?p=31747587
I described there how to fix such damage. Search for links for mx.pit and multiple file firmware to flash.
i9.0.1.3k galaxy imperator
gee2012 said:
Here is the link to Odin and a couple of pit files https://www.dropbox.com/sh/5k2b4jq4fvkcs9u/3a-R-77qnj. i `am not sure wich pit to use to be honest but i saw a tutorial using this pit file GT-I9300_mx_20120329.PIT.
So flash the firmware you need from www.samfirmware.com/firmware and use the pit file, check repartition, cross your fingers and hope for the best.
Click to expand...
Click to collapse
I'm thinking in use a Z3X BOX! Only hope!
SirKunon said:
Read this thread
http://forum.xda-developers.com/showthread.php?p=31747587
I described there how to fix such damage. Search for links for mx.pit and multiple file firmware to flash.
i9.0.1.3k galaxy imperator
Click to expand...
Click to collapse
Thx SirKunon... But I'm buying a Z3X BOX to solve this problem!!! Think will solve!
Hey guys,
First up, this is what I was running.
-Samsung Galaxy S3 GT-I9300
-FCC ID: A3LGTI9300A
-SSN: -I9300GSMH
-RootBox v3.8
So I installed RootBox v3.8 a few weeks ago and the update for v3.9 appeared on my phone along with the GAPPS update. I made the mistake of ONLY flashing the first update. So when my phone rebooted it kept on giving me the error 'Android.process.acore has stopped unexpectedly'. I was forced to then revert back to v3.8 and everything seemed peachy. Up until the other night where I turned on my phone and it showed, 'Firmware upgrade encountered an issue. Please select recovery mode in kies and try again'. I accessed 'Download Mode' and tried to flash my stock rom back on but it failed in ODIN and gave me this error.
'<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMA2_I9300OPSEMA1_I9300XXELLA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!'
Also if I switch on my phone, this is what appears, I can still access 'Download Mode'. Any help would be greatly appreciated.
AW: [Q] [HELP] Soft-Bricked Galaxy S3-I9300
Baraa01 said:
Hey guys,
First up, this is what I was running.
-Samsung Galaxy S3 GT-I9300
-FCC ID: A3LGTI9300A
-SSN: -I9300GSMH
-RootBox v3.8
So I installed RootBox v3.8 a few weeks ago and the update for v3.9 appeared on my phone along with the GAPPS update. I made the mistake of ONLY flashing the first update. So when my phone rebooted it kept on giving me the error 'Android.process.acore has stopped unexpectedly'. I was forced to then revert back to v3.8 and everything seemed peachy. Up until the other night where I turned on my phone and it showed, 'Firmware upgrade encountered an issue. Please select recovery mode in kies and try again'. I accessed 'Download Mode' and tried to flash my stock rom back on but it failed in ODIN and gave me this error.
' Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
I9300XXEMA2_I9300OPSEMA1_I9300XXELLA_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:7)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
boot.img
NAND Write Start!!
Complete(Write) operation failed.
Added!!
All threads completed. (succeed 0 / failed 1)
Removed!!'
Also if I switch on my phone, this is what appears, I can still access 'Download Mode'. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Heya!
Your SIII looks bad with this stripes!
Have you flashed your StockROM via Odin while you were in DownloadMode? If it don't be in DownloadMode, it also can't be flashed.
Try to download a firmware from samfirmware.com and to flash it via Odin in the PDA field while your device is in DownloadMode!
And when you have finished, go to Recovery and Wipe your Data&Cache!
Greetings...
Sent from my GT-I9300 using xda app-developers app
Of course I used ODIN to flash stock rom, it didn't work.
AW: [Q] [HELP] Soft-Bricked Galaxy S3-I9300
Of course I used ODIN to flash stock rom, it didn't work.
Click to expand...
Click to collapse
Sorry that I ask, but have you flashed it in Downloadmode?
Sent from my GT-I9300 using xda app-developers app
TheRealFelix0212 said:
Sorry that I ask, but have you flashed it in Downloadmode?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
If you read my first post, yes, I did flash it in Download Mode via ODIN.
Well, it obviously had a problem writing the rom into the phone (nand write failed). You may have a hardware fault. Do you have the nand chip that suffers from sds?
Sent from my GT-I9300 using xda premium
I've had similar issues before, not that exact screen, but issues with Odin. It worked eventually.
Try Odin3 v.1.85 from here (CF-Auto-Root thread).
Next, be sure you got a valid file, those from sammobile (Choose your country for).
Next, use only PDA button, nothing else, make sure it's the same settings as in root thread above.
Also make sure all Kies processes are closed.
Now, try until it works. It might take a few tries. This is what worked for me, hope it does for you too.
ratatattata said:
I've had similar issues before, not that exact screen, but issues with Odin. It worked eventually.
Try Odin3 v.1.85 from here (CF-Auto-Root thread).
Next, be sure you got a valid file, those from sammobile (Choose your country for).
Next, use only PDA button, nothing else, make sure it's the same settings as in root thread above.
Also make sure all Kies processes are closed.
Now, try until it works. It might take a few tries. This is what worked for me, hope it does for you too.
Click to expand...
Click to collapse
Still failed in ODIN. You reckon the eMMC chip is damaged?
Baraa01 said:
Still failed in ODIN. You reckon the eMMC chip is damaged?
Click to expand...
Click to collapse
That's what it sounds like keep trying to flash, try a different usb cable and computer if you can. Also remove any sim or sd card.
Also maybe the partition table is messed up but emmc is Ok?
Sent from my GT-I9300 using xda premium
jmpmjmpm said:
That's what it sounds like keep trying to flash, try a different usb cable and computer if you can. Also remove any sim or sd card.
Also maybe the partition table is messed up but emmc is Ok?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Same isssue here, same screen and everything.... I tried for over a month and nothing... got an expensive door steep. If you have any lights about this... let me know!!
try flashing recovery only and then flash 3.8 again through recovery.
try flashing the resurrection rom from the checkrom site through odin in download mode..
galaxys3lover said:
try flashing the resurrection rom from the checkrom site through odin in download mode..
Click to expand...
Click to collapse
Been there, done that. Nothing happens. Same error, Re-Partition failed.
please help?
-Samsung Galaxy S3 GT-I9300
-FCC ID: A3LGTI9300A
-SSN: -I9300GSMH
I hope I've not ended up with this phone mentioned in this thread....purchased a phone from ebay and the seller said its stuck on Android SIII logo...I can get into download mode but before I attempt anything can someone tell me if this is a UK phone so I can apply the correct ROM (if it works!).
Also, currently the phone does not charge, battery is fine as i've tried the battery from own s3 and vice versa...both batteries are fine but the phone does not appear to charge...I'm hoping this is ROM related....
Any help will be much appreciated otherwise its an expensive gamble!
BTW...In the download mode the product bit is blank and does not say Samsung galaxy s3 like my own working phone does...
I'm interested in rooting my new Galaxy S4 but I also would like the original stock rom in case if I ever need to go back to it. Would anyone by any chance have the original stock ROM?
Model: SCH-I545
Android Version: 4.2.2
*If any other details are needed, let me know.
This is a Verizon phone fyi.
Also, could someone please link me to a tutorial/guide for rooting the S4 and some other links that have ROMs that are a "must-get".
Thanks,
Hydra
Read the development forums. The stock image is ready enough to find, as are step by step root instructions. As to your last question, that is the type of thing that gets a thread locked. Read the dev forums, pick a few roms that pique your interest, and give them a test drive.
Sent from my Nexus 7 using Tapatalk HD
najaboy said:
Read the development forums. The stock image is ready enough to find, as are step by step root instructions. As to your last question, that is the type of thing that gets a thread locked. Read the dev forums, pick a few roms that pique your interest, and give them a test drive.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
I'm new here so tried my best to find the correct section, and did search for guides.
I'm currently using this guide, http://forum.xda-developers.com/showthread.php?t=2290798 , but upon flashing the prerelease kernal, it failed.
http://i.imgur.com/MjbRPrK.png
Also, in case of anything, how can I leave ODIN mode on the phone? Do I just power it off and reboot?
CM10.1 has been treating me pretty well. Haven't had any crashes or anything and runs fast and stable.
The only issue I noticed is you can't get a GPS lock while Network & Wireless location is on. Once you disable it GPS locks right in.
Sent from my SCH-I545 using Tapatalk 2
I now have a huge problem. I'm at the screen: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Need to resolve this as soon as possible.
HydraS4 said:
I now have a huge problem. I'm at the screen: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Need to resolve this as soon as possible.
Click to expand...
Click to collapse
Go to this guide and download the .tar image to be used in Odin http://forum.xda-developers.com/showthread.php?t=2301259. Boot into Odin mode following this guide http://forum.xda-developers.com/showthread.php?t=2290771. Follow all the instructions exactly and ask questions here if you have any.
Ryno77 said:
Go to this guide and download the .tar image to be used in Odin http://forum.xda-developers.com/showthread.php?t=2301259. Boot into Odin mode following this guide http://forum.xda-developers.com/showthread.php?t=2290771. Follow all the instructions exactly and ask questions here if you have any.
Click to expand...
Click to collapse
The tar file is 1.8 Gbs, is this the only method? I have horrible download speed and going to take 3 hours to download it.
Btw, can someone educate me on what just happened? Did I brick my phone? Will I lose any data?
Thanks,
Hydra
HydraS4 said:
The tar file is 1.8 Gbs, is this the only method? I have horrible download speed and going to take 3 hours to download it.
Btw, can someone educate me on what just happened? Did I brick my phone? Will I lose any data?
Thanks,
Hydra
Click to expand...
Click to collapse
Can you get into regular android recovery?
Ryno77 said:
Can you get into regular android recovery?
Click to expand...
Click to collapse
Nope, I'm working on trying Samsung Kies, maybe that will do it but I tried to get into recovery mode thru the phone but takes me to that same window.
I'm also downloading the stock firmware.
Did you try just flashing the stock kernel back using Odin? Everything you've done is listed in this thread, right? Technically if you tried to flash the pre release kernel and it failed nothing should have happened.
Ryno77 said:
Did you try just flashing the stock kernel back using Odin? Everything you've done is listed in this thread, right?
Click to expand...
Click to collapse
No, I haven't. Is that the one in the guide? If so, I'll do it soon. I have to go out, and now without a phone so going to be a problem for me.
Thanks for the quick support btw, appreciate it.
HydraS4 said:
No, I haven't. Is that the one in the guide? If so, I'll do it soon. I have to go out, and now without a phone so going to be a problem for me.
Thanks for the quick support btw, appreciate it.
Click to expand...
Click to collapse
I don't know if it will work but it's worth trying. The stock Odin should definitely fix your problem though. Yes it's in the thread.
Ryno77 said:
I don't know if it will work but it's worth trying. The stock Odin should definitely fix your problem though. Yes it's in the thread.
Click to expand...
Click to collapse
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Kernel.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Is what I get upon flashing kernel to the stock kernel. I am downloading the stock ROM as I type this. 1 Hour left to download it. Btw, does it matter what type of ROM I download?
Is there a difference from, http://www.rwilco12.com/downloads.p...Galaxy S4 (Verizon) (SCH-I545)/Stock ROMs/TAR and http://forum.xda-developers.com/showthread.php?t=2301259 ?
I'm guessing it's the No Wipe feature?
And what's the worst case scenario with rooting the phone? Anything permanent? If this stock ROM fixes the current problem, then I'll attempt to root once more.
Thanks,
Hydra
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRUAMDK_NoWipe.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
What is the PIT partition? Is that my internal storage?
Are you using the factory charging cable to connect to the computer? I don't know why everything keeps failing.... Odin has never failed for me. Do you have another computer you can try this on? Stock charging cable, different usb port or another computer are the things I would try next. I don't know anything about pit files.
Sent from my SCH-I545 using xda premium
Ryno77 said:
Are you using the factory charging cable to connect to the computer? I don't know why everything keeps failing.... Odin has never failed for me. Do you have another computer you can try this on? Stock charging cable, different usb port or another computer are the things I would try next. I don't know anything about pit files.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Tried two types of cables, a generic one and factory/original one. I tried two different computers with 2 different OS. Tried 3 different ports per computer.
Don't know what else I can do.
Since you're able to boot into Odin mode I think this can be fixed but it may require a pit file. Since I know nothing about pit files or why Odin kept failing for you I'm going to let someone else try and help you. I do not think your phone is beyond hope at this point. Good luck.... I hope someone chimes in with the help you need.
Sent from my SCH-I545 using xda premium
Ryno77 said:
Since you're able to boot into Odin mode I think this can be fixed but it may require a pit file. Since I know nothing about pit files or why Odin kept failing for you I'm going to let someone else try and help you. I do not think your phone is beyond hope at this point. Good luck.... I hope someone chimes in with the help you need.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Alright, I appreciate all the help. Thanks!
Hopefully someone can help me out before I head over to Verizon later today.
HydraS4 said:
Alright, I appreciate all the help. Thanks!
Hopefully someone can help me out before I head over to Verizon later today.
Click to expand...
Click to collapse
Yeah, no problem. I'm sorry nothing worked for you.
Sent from my SCH-I545 using xda premium
Does anyone know if Verizon will replace it if it isn't my fault? There is no proof of rooting just a messed up system.