Hi i could use all the help possible :crying:
i tryed rooting my xperia s which has a locked bootloader (using guide provided) last step something didnt work and now my device wont boot up and is stuck in a bootloop.
i have tryed a hard reset with no luck and when i use flashtool again i cant flash a firmware please guys could do with all the help
cheers
jay.rahman87 said:
Hi i could use all the help possible :crying:
i tryed rooting my xperia s which has a locked bootloader (using guide provided) last step something didnt work and now my device wont boot up and is stuck in a bootloop.
i have tryed a hard reset with no luck and when i use flashtool again i cant flash a firmware please guys could do with all the help
cheers
Click to expand...
Click to collapse
Note before you act :laugh:
I think this is hard brick.
Elwino2.3 said:
Note before you act :laugh:
I think this is hard brick.
Click to expand...
Click to collapse
so i guess the phones useless and literally a brick and noway back....
As far as i know u can't brick a mobile totally to dead state with locked bootloader
pradeep19922 said:
As far as i know u can't brick a mobile totally to dead state with locked bootloader
Click to expand...
Click to collapse
thanks bro looks like im not completely dead in the water, (it went wrong while flashing ics with all system wipe) i am trying to flash ti GB, but flash tool says disconnect i do hold vol down but nothing happens, just phone starts to reboot...any advice
Try holding vol up plus power buttom till the phone vibrates three times and then try entering fastboot
Sent from my LT26i using xda app-developers app
JoelChrist_ said:
Try holding vol up plus power buttom till the phone vibrates three times and then try entering fastboot
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Hey just an update guys managed to get the phone up and running through flashtool, i appreciate the advice given.
Related
SE Xperia x10 mini
CM7 installed
the phone does not start. just the green light on top keeps blinking!!!
not even the SE logo!!
i need help asap!!
Please!
EDIT: MAGIC! Phone is alive again. I presed the power button + home button together and it started. :-\
yash_p90 said:
SE Xperia x10 mini
CM7 installed
the phone does not start. just the green light on top keeps blinking!!!
not even the SE logo!!
i need help asap!!
Please!
EDIT: MAGIC! Phone is alive again. I presed the power button + home button together and it started. :-\
Click to expand...
Click to collapse
I have same problem, please help
Power + home button dont work
skatter12 said:
I have same problem, please help
Power + home button dont work
Click to expand...
Click to collapse
Try after a few minutes. Is the phone charged?
yash_p90 said:
Try after a few minutes. Is the phone charged?
Click to expand...
Click to collapse
Still no luck
Screen turns on and that is it, cant turn it of, cant do anything
skatter12 said:
Still no luck
Screen turns on and that is it, cant turn it of, cant do anything
Click to expand...
Click to collapse
Same problem here. If i press Power + Home it reboots, but i'm not able to get in Flash Mode. Therefor i think it needs to shut completely down..
Both of you, try flashing stock rom using flashtool
yash_p90 said:
Both of you, try flashing stock rom using flashtool
Click to expand...
Click to collapse
Without being able to get into flashmode?
Also, i highly doubt if i can flash it without unlocking the bootloader?
Thanks for the help attempt though
TimeWasterNL said:
Without being able to get into flashmode?
Also, i highly doubt if i can flash it without unlocking the bootloader?
Thanks for the help attempt though
Click to expand...
Click to collapse
Got it working. Repaired it with sony pc companion. Back to stock 2.1.
skatter12 said:
Got it working. Repaired it with sony pc companion. Back to stock 2.1.
Click to expand...
Click to collapse
So for you flash mode actually worked? Nice for you, congrats
Sent from my E15i using XDA
Hi guys, i bricked my phone when i tried to relock bootloader with flashtool(BLRelock). Now my phone don`t start(led don`t blink, phone don`t vibrate). What should i do? Need help.
adyfabregas04 said:
Hi guys, i bricked my phone when i tried to relock bootloader with flashtool(BLRelock). Now my phone don`t start(led don`t blink, phone don`t vibrate). What should i do? Need help.
Click to expand...
Click to collapse
just flash a kernel with flashtool
You got a hardbrick, never relock bootloader on custom kernel.
I can`t flash a kernel `cause my phone don`t start. And I don`t know what to do...
Your battery is charged??
IF NOT HARD BRICK. if have warranty go to sony center or tell a lie about your phone, your phone reset and dont turn on again something similar xd. If dont have warranty the fix is via JTAG and you need to pay for it.
adyfabregas04 said:
I can`t flash a kernel `cause my phone don`t start. And I don`t know what to do...
Click to expand...
Click to collapse
you can flash a kernel even if it can't boot by pressing back button while connecting usb cable...
isko95 said:
you can flash a kernel even if it can't boot by pressing back button while connecting usb cable...
Click to expand...
Click to collapse
I cant do this cause my phone dont start up . I tried the trick with battery removed... remove batery, pres back button, connect batery and pres power button, but dont start . Its dead
adyfabregas04 said:
I cant do this cause my phone dont start up . I tried the trick with battery removed... remove batery, pres back button, connect batery and pres power button, but dont start . Its dead
Click to expand...
Click to collapse
Did u try what i said?
isko95 said:
Did u try what i said?
Click to expand...
Click to collapse
Yes, i tried but phone dont start up and pc dont recognize it.
adyfabregas04 said:
Yes, i tried but phone dont start up and pc dont recognize it.
Click to expand...
Click to collapse
I think you can't understand what i'm saying..
isko95 said:
I think you can't understand what i'm saying..
Click to expand...
Click to collapse
yes, i misunderstand. how can i do it?
Look what i did:
My phone goes to vodafone service and they locked my phone on vodafone, I tooke the phone to a service gsm to unlock it. When i take it, i tried to flash a costum kernel: nAa 14, i used s1tool and shows me "UNKNOWN SIM CERTIFICATE" or sm like that so I can`t unlock bootloader, but i read somewhere to use "stool2" and i used it now i tried to flash nAa kernel, i did it and i installed gingersony but phone loop on nAa kernel . Then...i flash BLRelock...after flash finished, phone died. Dont start up, green led dont blink, phone dont vibrate and flashtool,pcc dont recognize it.
sorry for bad english
isko95 said:
you can flash a kernel even if it can't boot by pressing back button while connecting usb cable...
Click to expand...
Click to collapse
That would have worked if the phone wasn't bootloader-bricked. Installing the blrelock.ftf-bootloader on the xperia mini pro will make it unbootable. No back-arrow-flash-option, no hack, no way, no how. The phone is properly bricked.
Only way to un-brick is JTAG. Please do not try to "help" people if you do not know how f'ed up their problem is.
isko95 said:
you can flash a kernel even if it can't boot by pressing back button while connecting usb cable...
Click to expand...
Click to collapse
hardbricked is where the device can't be detected (changing, flash mode, boot, etc.. all is useless)
the only solution is j-tag..
got the same problem & my x10 mini pro RIP..
---------- Post added at 11:01 AM ---------- Previous post was at 10:57 AM ----------
Verbato said:
That would have worked if the phone wasn't bootloader-bricked. Installing the blrelock.ftf-bootloader on the xperia mini pro will make it unbootable. No back-arrow-flash-option, no hack, no way, no how. The phone is properly bricked.
Only way to un-brick is JTAG. Please do not try to "help" people if you do not know how f'ed up their problem is.
Click to expand...
Click to collapse
Agreed. JTAG is the only option left..
:good:
I can use JTAG at work (we have lauterbach trace32) but I can not find any pinout diagram or procedure. Can sameone help me? Thank you very much.
Please Help !
isko95 said:
you can flash a kernel even if it can't boot by pressing back button while connecting usb cable...
Click to expand...
Click to collapse
Dear Sir,
When we select the Firmware in Flash Tool ( Flash Mode ) then we got the message to unplug the device-Then to press the back button-Then to connect the Usb to phone, But as with this Hard Bricked situation nothing happens on the phone and the same message remain on the screen.
Usually after follwoing such process we can easily flash any kernel/Firmware but due to Hard Brick we cannot.
I would really appreciate if you suggest how to flash kernel when phone is not showing any life and not connecting to the PC or communicating with the Flash Tool ( As message flash that Device Not Connected on Flash Tool )
Please Help !!
Hi to all, i think that my xperia p is dead... Not red led or green led,nothing... I was intall The cwm recovery 6.0.4.7 AnD after The intallation The mobile is dead :\ sorry for may bad bad english please help me
locked bootloader or unlocked
Sent from my Xperia P using Tapatalk
ironclad74 said:
locked bootloader or unlocked
Sent from my Xperia P using Tapatalk
Click to expand...
Click to collapse
Unlocked..
chessa.mat said:
Unlocked..
Click to expand...
Click to collapse
whether u had any backup of ur previous rom???
Sent from my Xperia P using Tapatalk
ironclad74 said:
whether u had any backup of ur previous rom???
Sent from my Xperia P using Tapatalk
Click to expand...
Click to collapse
Nothing..
Fastboot
chessa.mat said:
Nothing..
Click to expand...
Click to collapse
Can you fastboot the file boot.img (extract it from the ZIP file of a working ROM for you phone), as explained in the Q&A section?
If yes, you can install your ROM from CWM-recovery.
IAmNice said:
What did you do exactly? Explain step by step please.
Sent from my xperia P using xda app-developers app
Click to expand...
Click to collapse
I was in my recovery for install The latest versione Of cwm ,after The installation i do reboot system now but than apparead black screen and nothing,i can't connect to PC And can't use flashtool i think that The versione Of cwm wasn't for my model
sorry for my english
Reset phone
chessa.mat said:
I was in my recovery for install The latest versione Of cwm ,after The installation i do reboot system now but than apparead black screen and nothing,i can't connect to PC And can't use flashtool i think that The versione Of cwm wasn't for my model
sorry for my english
Click to expand...
Click to collapse
This thread explains very well how to get your phone operational again:
http://forum.xda-developers.com/showthread.php?t=1849170
Resetting your phone by pressing the volume-up and power key together till it vibrates one time (soft reset) or till it vibrates three times (hard reset), should allow you to connect in fastboot again and install a working boot.img.
Beverke said:
is thread explains very well how to get your phone operational again:
http://forum.xda-developers.com/showthread.php?t=1849170
Resetting your phone by pressing the volume-up and power key together till it vibrates one time (soft reset) or till it vibrates three times (hard reset), should allow you to connect in fastboot again and install a working boot.img.
Click to expand...
Click to collapse
Nothing not vibrations i had already tried
IAmNice said:
Plug it in the charger and let it charge for a long time. Doesn't look like your phone is dead yet.
Sent from my Xperia P using xda app-developers app
Click to expand...
Click to collapse
OK i will try with The charger :good:
Still not red led
Guys and if I try to put off The battery?
do
chessa.mat said:
Guys and if I try to put off The battery?
Click to expand...
Click to collapse
Seems to be next step - or wait till battery is completely empty, what can take several days.
Hi! This happened to my phone as well. Damn. It's not charging, can't boot in fastboot or flash mode, the Power + Vol Up trick is not working. Nada. Help me please?
my phone restarting when the xperia logo appear
and didnt complete starting
i try to do hard reset by holding the power botton and the volume up key but it didnt do any thing and still blank screen
any solution plzzzzzzzzzzzzzzzz
Aloosh99 said:
my phone restarting when the xperia logo appear
and didnt complete starting
i try to do hard reset by holding the power botton and the volume up key but it didnt do any thing and still blank screen
any solution plzzzzzzzzzzzzzzzz
Click to expand...
Click to collapse
Do you have any custom rom or kernel?
Vibrated 3 times when u do hard reset?
no i dont have any custom rom or kernel
and yes it vibrate 3 times but do nothing after that
Aloosh99 said:
no i dont have any custom rom or kernel
and yes it vibrate 3 times but do nothing after that
Click to expand...
Click to collapse
Is your bootloader locked or unlocked and rooted?
You can try to reflash stock .tft with flashtool.
my phone is locked and not rooted
what i can do???
Aloosh99 said:
my phone is locked and not rooted
what i can do???
Click to expand...
Click to collapse
Try to reflash your stock JB or ICS firmware.
i dont know if its ics or jb
how i can know if it is not working:crying:
Aloosh99 said:
i dont know if its ics or jb
how i can know if it is not working:crying:
Click to expand...
Click to collapse
http://xperiadownload.cz/index.php/xperiadownload/category/26-p select on of these firmware and flash it with flashtool! Or you just can find specific tft for your region in forums!
@Aloosh99
Have you ever used PC Companion, for backup or anything?
If not install it.
Start and click start under support zone, click start under update phone/tablet software, click repair, and follow the instructions on screen
my z2 hard brick
help me
not connected flash mode and fast mod
z1 and zu unbrick not worked this device
Captain-AR said:
my z2 hard brick
help me
not connected flash mode and fast mod
z1 and zu unbrick not worked this device
Click to expand...
Click to collapse
what is it looping or not turning or what
bassil_zein said:
what is it looping or not turning or what
Click to expand...
Click to collapse
HARDBRICK (My device)
1-will not start
2-flash mode is not connected
:/
OK ?
Captain-AR said:
HARDBRICK (My device)
1-will not start
2-flash mode is not connected
:/
OK ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
tried this?
unbrick any brick?
Envious_Data said:
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
tried this?
unbrick any brick?
Click to expand...
Click to collapse
It did not solve my problem
my device is hard brick
not connected flashtool
When the black screen stays on
The buttons do not work
Probably will not be charged
and...
Captain-AR said:
It did not solve my problem
my device is hard brick
not connected flashtool
When the black screen stays on
The buttons do not work
Probably will not be charged
and...
Click to expand...
Click to collapse
did you try holding volume up and power for long time
eventualy device has to respond
Envious_Data said:
did you try holding volume up and power for long time
eventualy device has to respond
Click to expand...
Click to collapse
not respond
Captain-AR said:
not respond
Click to expand...
Click to collapse
5mins to 7hrs
try rubber band
wait for response
if any response try charging, then try flashing
Captain-AR said:
HARDBRICK (My device)
1-will not start
2-flash mode is not connected
:/
OK ?
Click to expand...
Click to collapse
Okay Buddy First Try It If Its Booting In Battty Mode Plug It In The Charger/Dock If It Work Then You Need To Install Drivers For Flash Tool: ( http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4) My Phone Did This 2 Just Install The Drivers And Retry Anyway If Its Not Turning Att All Maybe U Had The Board ****ed Up :B Just Try This First
bassil_zein said:
Okay Buddy First Try It If Its Booting In Battty Mode Plug It In The Charger/Dock If It Work Then You Need To Install Drivers For Flash Tool: ( http://doomlord.xperia-files.com/download.php?dlid=Rmxhc2h0b29sLWRyaXZlcnMtMS41LTIwMTQwMzE4) My Phone Did This 2 Just Install The Drivers And Retry Anyway If Its Not Turning Att All Maybe U Had The Board ****ed Up :B Just Try This First
Click to expand...
Click to collapse
eventualy device has to respond
Captain-AR said:
eventualy device has to respond
Click to expand...
Click to collapse
No it doesn't a hard brick by definition won't respond to anything if it does its soft bricked. But OP if your device is really hard bricked the only way to fix it is to return it to Sony or similar type.
Take it to warranty or service then
Sent from my D6503 using XDA Premium 4 mobile app