My details:-
Phone GT-I9100
Android 4.0.4
BB I9100DXLP9
Kernel [email protected]#1
Build No 4.2
Mod Slim ics
Want to try out Jkay-- *#1234# not working.
Kernel is Fluxi.
My noob question - what is my pda (i mean like xwkf3/xwlp9/xwlpf)?:fingers-crossed:
Thanks..
nickxxxx said:
My details:-
Phone GT-I9100
Android 4.0.4
BB I9100DXLP9
Kernel [email protected]#1
Build No 4.2
Mod Slim ics
Want to try out Jkay-- *#1234# not working.
Kernel is Fluxi.
My noob question - what is my pda (i mean like xwkf3/xwlp9/xwlpf)?:fingers-crossed:
Thanks..
Click to expand...
Click to collapse
*#1234# does not work ?!
Ok, usually the PDA is the same as the Build version/number => DXLP9.
Maybe you have to reflash the kernel or the whole ROM to get the *#1234# work again on your phone.
Dial codes will only work only stock Samsung ROM's. With it being “build 4.2," I'll assume it isn't a stock Samsung ROM. Flash one if you wish to use these dial codes.
Sent from my GT-I9100 using Tapatalk 2
nickxxxx said:
My details:-
Phone GT-I9100
Android 4.0.4
BB I9100DXLP9
Kernel [email protected]#1
Build No 4.2
Mod Slim ics
Want to try out Jkay-- *#1234# not working.
Kernel is Fluxi.
My noob question - what is my pda (i mean like xwkf3/xwlp9/xwlpf)?:fingers-crossed:
Thanks..
Click to expand...
Click to collapse
deleted
Sun90 said:
well ur PDA is DXLP9 same as ur baseband
u mean u want to try the jkay framewrk mod, if so u have to dwnld the one made for DXLP9 and flash the same and not any other build one
Click to expand...
Click to collapse
This is not accurate, sorry. PDA version is the build number of a stock Samsung firmware. Not baseband. Baseband is the same as phone/modem.
nickxxxx;is749702 said:
My details:-
Phone GT-I9100
Android 4.0.4
BB I910DXLP9
Kernel [email protected]#1
Build No 4.2
Mod Slim ics
Want to try out Jkay-- *#1234# not working.
Kernel is Fluxi.
My noob question - what is my pda (i mean like xwkf3/xwlp9/xwlpf)?:fingers-crossed:
Thanks..
Click to expand...
Click to collapse
You're running Slim ICS; which is NOT a Samsung stock firmware. So technically, you don't actually have a PDA version.
Anyone else this this looks unusual?
Android Version: 4.0.3
Baseband Version: I9100XXKI3
Build Number: XWLPG V5.1.2
Click to expand...
Click to collapse
SwannyBhoy said:
Anyone else this this looks unusual?
Click to expand...
Click to collapse
Not really. Looks like a Gingerbread modem was flashed to an ICS firmware. That is only unusual in that it would never come like that packaged from Samsung. But it still should work just fine. Modems are cross compatible between Gingerbread and ICS.
ctomgee said:
This is not accurate, sorry. PDA version is the build number of a stock Samsung firmware. Not baseband. Baseband is the same as phone/modem.
.
Click to expand...
Click to collapse
well thank u for correcting me ma8
edited my post for the same
ctomgee said:
This is not accurate, sorry. PDA version is the build number of a stock Samsung firmware. Not baseband. Baseband is the same as phone/modem.
You're running Slim ICS; which is NOT a Samsung stock firmware. So technically, you don't actually have a PDA version.
Click to expand...
Click to collapse
Okay... got it.. also Jkay works with stock roms or custom roms which have support for it and i dont think that slim ics support it as of yet.
Thanks.
Related
Hello there,
I can't find my kernel model anywhere on the internet. Could you please support me with this one? I'm somewhat a newbie at this rooting business.
Settings -> About phone - Kernel Version states 2.6.35.7-I9100XWKDD-CL161513 [email protected] #2
- Build number is "GINGERBREAD.JIKG3".
- Basband Version is I9100TJIKG3
Anyone?
Thank you very much,
RawrGasm
Any gingerbread kernel should work, check out the Galaxy Sii developer section, If you mean you need a stock kernel, I have no idea.
Sent from my GT-I9100 using XDA
okmijnlp said:
Any gingerbread kernel should work, check out the Galaxy Sii developer section, If you mean you need a stock kernel, I have no idea.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Not true... OP, you need a KG3 kernel. Look in Odia's insecure kernels thread. I'm mobile, so can't link. Just search for it. There's a link near the top that's with big red text for older kernels. Check in there.
ctomgee said:
Not true... OP, you need a KG3 kernel. Look in Odia's insecure kernels thread. I'm mobile, so can't link. Just search for it. There's a link near the top that's with big red text for older kernels. Check in there.
Click to expand...
Click to collapse
I need a KG3 kernel because of what, build number reading KG3 at it's end or the baseband version? Because if it's the Baseband Version, I was wrong, it's KG1 at the end. So tell me please, if my baseband version is I9100TJIKG1, do I need a KG1 kernel?
RawrGasm said:
I need a KG3 kernel because of what, build number reading KG3 at it's end or the baseband version? Because if it's the Baseband Version, I was wrong, it's KG1 at the end. So tell me please, if my baseband version is I9100TJIKG1, do I need a KG1 kernel?
Click to expand...
Click to collapse
Pretty sure it's the build version. Baseband is for modem.
I updated my SGS II to ICS, but I dont understand how i'll root my phone? plz help
PDA:I9100XXLPQ
Baseband Version: I9100DDLP8
Kernel Version: 3.0.15-I9100XXLPQ-CL223505 [email protected] #3
Build Number: IML74K.XXLPQ
CSC: I9100ODDLP7
Plz help someone..
austinhalder said:
I updated my SGS II to ICS, but I dont understand how i'll root my phone? plz help
PDA:I9100XXLPQ
Baseband Version: I9100DDLP8
Kernel Version: 3.0.15-I9100XXLPQ-CL223505 [email protected] #3
Build Number: IML74K.XXLPQ
CSC: I9100ODDLP7
Plz help someone..
Click to expand...
Click to collapse
Flash any kernel from original development section, then your mobile will be rooted. If you want stock kernel with root then flash CF-Root, make sure you choose correct version which has xxlpq.
That is very old ICS firmware better try some other ICs firmware like LPG
austinhalder said:
I updated my SGS II to ICS, but I dont understand how i'll root my phone? plz help
PDA:I9100XXLPQ
Baseband Version: I9100DDLP8
Kernel Version: 3.0.15-I9100XXLPQ-CL223505 [email protected] #3
Build Number: IML74K.XXLPQ
CSC: I9100ODDLP7
Plz help someone..
Click to expand...
Click to collapse
use cf root
download cf root from here
http://download.chainfire.eu/151/CF-Root/SGS2/CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.zip
Here is a complete guide how to root ur phone
http://www.theandroidsoul.com/root-xxlpq/
Actually official Indian release is XWLP7 not XXLPQ. It is available over at sammobile. LP7 is much better than LPQ.
jk419 said:
Actually official Indian release is XWLP7 not XXLPQ. It is available over at sammobile. LP7 is much better than LPQ.
Click to expand...
Click to collapse
For XWLP7, can you please tell how i would root?
Thnx every one
austinhalder said:
For XWLP7, can you please tell how i would root?
Thnx every one
Click to expand...
Click to collapse
check the link below u have all the details and files needed to root XWLP7
http://forum.xda-developers.com/showthread.php?t=1103399
Sun90 said:
check the link below u have all the details and files needed to root XWLP7
http://forum.xda-developers.com/showthread.php?t=1103399
Click to expand...
Click to collapse
Which one i use for root?
CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5.zip
or
CF-Root-SGS2_DX_XTC_LP7-v5.4-CWM5.zip
for I9100XWLP7_I9100ODDLP9?
austinhalder said:
Which one i use for root?
CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5.zip
or
CF-Root-SGS2_DX_XTC_LP7-v5.4-CWM5.zip
for I9100XWLP7_I9100ODDLP9?
Click to expand...
Click to collapse
you can use either of them, just make sure you use lp7. i used CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5.zip
jk419 said:
you can use either of them, just make sure you use lp7. i used CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5.zip
Click to expand...
Click to collapse
Thnx
Plz some one tell me truth about my phn.. i was checked my phn vth "got brick bug" app.. and it says im in known danger... i update my phn in 2012 07 24. GB-> I direct update via OTA.. my earlier original kernel is like XXLPF and i root my phn with Cf-root ver 5.5 XWLPF successfully. And now my problem is cant i do a full wipe? Due to emmc bug? Im on stock 4.0.3..
PDA i9100JPLPF
PHONE I9100XXLPX
CSC i9100JPLPC
Buildinfo wed may 30 16:47:24 kst 2012
And also can i goto safe kernel like Siyah Kernel while im here? If so plz giv the guide line for it...
Im sit bit noob vth android
Only leaked Sammy 4.0.4 kernels have eMMC_CAP_ERASE enabled.
4.0.3 not. Also custom kernels are safe (except CF-Root for 4.0.4).
przemcio510 said:
Only leaked Sammy 4.0.4 kernels have eMMC_CAP_ERASE enabled.
4.0.3 not. Also custom kernels are safe (except CF-Root for 4.0.4).
Click to expand...
Click to collapse
+1
Ohh i see n tht bcz CF-root also based on 99% stock kernel?
4.0.4 cf kernel mean cf root LQ5? Am i correct?
sasadara said:
+1
Ohh i see n tht bcz CF-root also based on 99% stock kernel?
4.0.4 cf kernel mean cf root LQ5? Am i correct?
Click to expand...
Click to collapse
You are right.
So use stock 4.0.4 with no wipe or completely omit 4.0.4 until new update without bug.
sekhargreen said:
You are right.
So use stock 4.0.4 with no wipe or completely omit 4.0.4 until new update without bug.
Click to expand...
Click to collapse
Ohh u all saved me by getting a heart case
I prefer to stay in 4.0.3 until all this cases vl solve..
Thankx guys.. hope ths thread vl helps to othr noobs too...
sasadara said:
+1
Ohh i see n tht bcz CF-root also based on 99% stock kernel?
4.0.4 cf kernel mean cf root LQ5? Am i correct?
Click to expand...
Click to collapse
Hi, I just wanna be sure. I currently have:
4.0.3
Baseband: I9100UHLPG
Kernel: 3.0.15-i9100xxlpq-cl223505 [email protected] #3
Build Number: IML74K.UHLPQ
I'm not sure whether my Kernel is 4.0.3 or 4.0.4? Can you please let me know?
Also, what if I'll do a factory reset on the phone itself (doing it the normal way) Settings>Backup and Reset? will it have the same effect as doing a wipe via CWM? Thank you.
You are on 4.0.3 then whats the problem? Dude? ^^
Peace
Hit Thanks & It will Disappear
Sent from S II Running Fully Modified Official ICS 4.0.4
Next Device: Upcoming Nexus
Omaxe said:
You are on 4.0.3 then whats the problem? Dude? ^^
Peace
Hit Thanks & It will Disappear
Sent from S II Running Fully Modified Official ICS 4.0.4
Next Device: Upcoming Nexus
Click to expand...
Click to collapse
Thanks, haha. I just wanna make sure that my Kernel won't create any issues.
3.0.15-i9100xxlpq-cl223505 [email protected] #3
Thanks
Superbrick bug is only on Stock 4.0.4. kernels. You have 4.0.3. You're safe, don't worry.
Sent from my Galaxy S2 GT i9100
I'm about to get my SGSII in about an hour and the first thing I plan to do is flash the Siyah kernel through odin and gain root. Is there a way to backup the stock kernel without root before I flash this one?
Thanks in advance.
you dont need to backup the original stock kernel. you can download it anytime, just use the search function. i recommend flashing a matching stock rooted kernel for your firmware, then perform traingle away and then flash siyah from cwm.
screenager said:
you dont need to backup the original stock kernel. you can download it anytime, just use the search function. i recommend flashing a matching stock rooted kernel for your firmware, then perform traingle away and then flash siyah from cwm.
Click to expand...
Click to collapse
OK, thanks for the good advice. I will definitely go that route since this is the first SGSII I've owned and you would know better than I do. Just for the record if I did it my way would it have bricked my phone?
jrosetto said:
I'm about to get my SGSII in about an hour and the first thing I plan to do is flash the Siyah kernel through odin and gain root. Is there a way to backup the stock kernel without root before I flash this one?
Thanks in advance.
Click to expand...
Click to collapse
After getting your galaxy s2,
First thing is to Post your firmware details here; Goto Settings - About phone, and post everything you see.
You might not need to flash any kernel at the end the day.
Happy Independence Day!
OK just got the phone and they didn't send it with a battery...
Anyway here is the info
Model Number: SGH-T989
Android version: 4.0.4
Baseband version: T989UVLH1
Kernel version: 3.0.8
Build number: IMM76D.UVLH1
Let me know if you need anything else.
Thanks!
jrosetto said:
OK just got the phone and they didn't send it with a battery...
Anyway here is the info
Model Number: SGH-T989
Android version: 4.0.4
Baseband version: T989UVLH1
Kernel version: 3.0.8
Build number: IMM76D.UVLH1
Let me know if you need anything else.
Thanks!
Click to expand...
Click to collapse
Good.
1. Your device is T-Mobile variant of the Galaxy SII.
2. Flashing anything meant for GT I9100X including Siyah kernel will destroy your phone.
3. Visit the right forum for your phone, and continue from there: forum.xda-developers.com/forumdisplay.php?f=1329
Consider yourself very lucky!
Don't flash Siyah kernel at all
Happy Independence Day!
Wow thank you for saving me. Didn't realize there was a subforum for my phone. I definitely owe you one.
jrosetto said:
OK just got the phone and they didn't send it with a battery...
Anyway here is the info
Model Number: SGH-T989
Android version: 4.0.4
Baseband version: T989UVLH1
Kernel version: 3.0.8
Build number: IMM76D.UVLH1
Let me know if you need anything else.
Thanks!
Click to expand...
Click to collapse
u have a dedicated Q&A section for ur T989 ma8, do please post ur issue there
link Here
STOP! Dont flash your phone with siyah kernel. It will brick your phone. Right now Siyah works only for the International version.
Sent from my GT-I9100 using Tapatalk
Hello, i recently updated my GT-I9100 to 4.0.3 and i really don't like it.
Is there a way to downgrade it back to 2.3.x ?
PDA I9100XWLP7
PHONE/BASEBAND I9100XXLPS
CSC I9100OXXLPH
Thanks!
mr_fing3rs said:
Hello, i recently updated my GT-I9100 to 4.0.3 and i really don't like it.
Is there a way to downgrade it back to 2.3.x ?
PDA I9100XWLP7
PHONE/BASEBAND I9100XXLPS
CSC I9100OXXLPH
Thanks!
Click to expand...
Click to collapse
Of course, please try to just search because there are several guides to tell you how. But why not upgrade to official 4.0.4?
Sent from the Matrix
mr_fing3rs said:
Hello, i recently updated my GT-I9100 to 4.0.3 and i really don't like it.
Is there a way to downgrade it back to 2.3.x ?
PDA I9100XWLP7
PHONE/BASEBAND I9100XXLPS
CSC I9100OXXLPH
Thanks!
Click to expand...
Click to collapse
Ofcourse there is. Just flash a 2.3.x rom
Sure but WHY would you wanna go back to Gingerbread?! You can just root your phone and install CyanogenMod 7.1 or a similar 2.3.4 based ROM although I really can't understand why you'd wanna do that.
bi11ie said:
Sure but WHY would you wanna go back to Gingerbread?! You can just root your phone and install CyanogenMod 7.1 or a similar 2.3.4 based ROM although I really can't understand why you'd wanna do that.
Click to expand...
Click to collapse
Why wouldnt he.I run GB too.
Donnie Sins said:
Of course, please try to just search because there are several guides to tell you how. But why not upgrade to official 4.0.4?
Sent from the Matrix
Click to expand...
Click to collapse
4.0.4 is not available in Lithuania and i can't find a Baltic SEB 2.3.x ROM
mr_fing3rs said:
4.0.4 is not available in Lithuania and i can't find a Baltic SEB 2.3.x ROM
Click to expand...
Click to collapse
You may flash any country's stock ROM. It doesn't matter. However, make sure that the ROM isn't branded. That's all. To get the roms, go to www.sammobile.com, sign up for free, and enter your phone details. Choose any country, e.g. any European unbranded firmware.
Sent from my GT-I9100 using Tapatalk 2
Hi I am too form Lithuanian write me pm...
Merry christmas and Happy new year
Paulius
theunderling said:
Why wouldnt he.I run GB too.
Click to expand...
Click to collapse
Well, ICS is significantly better than GB. Google did an amazing job. Stock ICS looks gorgeous, is very responsive and more functional.
once you go up...you never go down........