Memory card corrupt!! - Galaxy S III Q&A, Help & Troubleshooting

I was taking some pictures on my s3 yesterday and randomly the camera went black. The whole phone packed up so I took the battery out and put it in again and started the phone back up.
Now my memory card isn't recognised, and even when I put it into a USB memory card reader to my PC, it doesnt show up either.
If I put the memory card in my phone, and connect my phone to PC using a USB cable, the device shows up under Portable devices, and then shows phone and memory card capacities. But when I click on the memory card, it says no files!
Any help please!? I had loads of photos and videos on the card that I need back!! It won't show up under My computer so using recovery software is pointless.
Thanks

Sounds like your sd card is broken. Just to make sure, try another card reader and another usb port on your computer. If it still doesn't show up, get a replacement.

no matter what , data is gone
try low lever hdd format app
and try re formatting it and seee if u can save ur sd atleast

RECUVA or similar programs may recover some data .
jje

member68 said:
Sounds like your sd card is broken. Just to make sure, try another card reader and another usb port on your computer. If it still doesn't show up, get a replacement.
Click to expand...
Click to collapse
Tried another reader, and different port, still the same.
vegeta1 said:
no matter what , data is gone
try low lever hdd format app
and try re formatting it and seee if u can save ur sd atleast
Click to expand...
Click to collapse
When I put the card in my phone, and connect the phone by USB to my computer, it shows up there, but when I click on it, there's no files. The memory is still showing as being used, but just not accessible.
The card doesn't show by itself on the main My Computer screen.
Here's a screenshot....

JJEgan said:
RECUVA or similar programs may recover some data .
jje
Click to expand...
Click to collapse
its not being recognised in my computer, so how would Recuva find it?

azdaboss said:
I was taking some pictures on my s3 yesterday and randomly the camera went black. The whole phone packed up so I took the battery out and put it in again and started the phone back up.
Now my memory card isn't recognised, and even when I put it into a USB memory card reader to my PC, it doesnt show up either.
If I put the memory card in my phone, and connect my phone to PC using a USB cable, the device shows up under Portable devices, and then shows phone and memory card capacities. But when I click on the memory card, it says no files!
Any help please!? I had loads of photos and videos on the card that I need back!! It won't show up under My computer so using recovery software is pointless.
Thanks
Click to expand...
Click to collapse
Try this procedure it might be helpful
http://forum.xda-developers.com/showthread.php?t=1355528
if you are heavy user better use Sandisk original one.

Related

How to format micro SD

Hi,
I would like to format my micro SD card, but I don't know how to.
I know that there is an option that says " clear storage" but it is for internal storage only ? or can format as well the sd card?
I haven't any card reader on my pc, so I have no idea about how to do it from Hermes itself. .
REgards
Sniuk said:
Hi,
I would like to format my micro SD card, but I don't know how to.
I know that there is an option that says " clear storage" but it is for internal storage only ? or can format as well the sd card?
I haven't any card reader on my pc, so I have no idea about how to do it from Hermes itself. .
REgards
Click to expand...
Click to collapse
Keep your micro sd in card reader , you can format it only from pc.(buy one card reader)
if you want format micro sd from device , you need a 3d part application , but from pc is better.
Regards
Imdantes
The resco explorer, has a format storage card utility
I have done it already, and works fine.
pocket mechanic works well, also finds errors, cleans up, makes coffee etc
If you're on XP, just right go into disc management, find the card, right click, and choose format...likely a similar method on Vista, but I haven't used it.
No third party tools needed, etc.
Edit, oops my bad, I misread that you didn't have a card reader for the pc.
Another vote for Resco explorer btw, I couldn't live without it.
Well, I got 4GB Micro SD. Formatting (FAT32) done through PC but never been possible through Artemis by any of the softwares mentioned here. The SD works fine under windows, but I gatta take it out in every new ROM or Radio flashing. Is there any way to make it being seen by Artemis DOS system?
Thanks
problem with my 4gig micro sd
hey guys...
about this topic...
i have a problem..
i have a 4gig micro sd for dopod 838 pro..
i think.. i had a virus the problem is..
i can no longer see the storage card neither on my phone nor on my pc...
how can i get to format it?..
at first it was working just fine but all of a sudden i can no longer show the sd...
what can i do?..
pls. help...
salamat!!/thanks!!/arigto!!/
nio.elsinore said:
hey guys...
about this topic...
i have a problem..
i have a 4gig micro sd for dopod 838 pro..
i think.. i had a virus the problem is..
i can no longer see the storage card neither on my phone nor on my pc...
how can i get to format it?..
at first it was working just fine but all of a sudden i can no longer show the sd...
what can i do?..
pls. help...
salamat!!/thanks!!/arigto!!/
Click to expand...
Click to collapse
Delete the folder "MSMETADATA" on your storage card and do a soft reset and that should work
Unless of course the sd card has failed... I had one or two do that... All you have, if the pc won't recognise to format, is a lump of plastic.... You'll have to get a new one...
phone no longer recognizes sdhc card
Okay, guys I flashed my hermes this morning with this
http://rapidshare.com/files/2179382...1.255.1_102_6275_1.38.00.10_108_Ship.exe.html and now it no longer recognizes any of my micro sd nor my micro sdhc cards. They come up on the computer but not on the device. I even installed the sdhc.777 cab and it still doesn't work. Help please...
refuse2bstopped, try a different os... If that doesn't work you may have a broken or misaligned pin in your usb reader on the Hermes. It may also just be dirty or have some corrosion on it. If you want to clean it use a cotton bud and some isopropyl alcohol (surgical spirits). DON'T USE METHYLATED SPIRITS... It leaves a residue.
Cheers...
sir...
im just wondering if my mini sd is busted and it has no use anymore..
why can my camera still recognize that there is still a memory card installed in to my unit that its even asking me to either save the picture's towards my unit or mmc
im just wondering if it can still be recognized by my unit can i still fix it/format it so that i could use it again...??
i know your the expert on this that's why i thought of asking you this..
thanks for reading my msg'
I like to look at things step by step
1. SD card isn't recognised by Hermes - not even detected...
2. Camera detects it - did you try taking a few pictures and seeing if it actually wrote them to the card? I had a phone that registered the card but kept throwing up "sd card corrupt" every time I tried to use it.
3. Does a PC recognise the sd card when inserted into a card reader? If you don't have 1 I'd make this a priority to get, a friend of mine bought one off ebay for $5 AUD including postage...
If the pc recognises it maybe you should reformat it fat32. remember to backup any data first...
4. If the pc and camera have no problem then I'd start suspecting the Hermes... I have two sd cards so I have no problems testing but you may need to either get a smaller card - I use a 512 for flashing the os, or find someone who can lend you theirs to test. If the 2nd card reads then either the card is bung or the Hermes has a problem with it (incompatibility has been known to happen). Clean the card reader as best you can with isopropyl alcohol and a piece of cloth. There may be some type of corrosion or dust on the sd card reader contacts.
These are the steps I have taken to work out if the sd card or Hermes is a fault. Generally I find its the card (happened once to me and once to a friend).
Hope this helps...
Cheers...
Been through this. Very recently, actually. Like, last night.
I don't have a microSD reader and I found myself needing to reformat my microSD in my Hermes to FAT32. I was trying to do SD flashes. Long story.
Anyway, know what I did? I used WM5torage. As long as your ROM is functional and your SD card isn't wasted, activate WM5torage and have WinXP format your "USB Mass Storage Device" for you through My Computer. It only affects the SD card.
I mean, it worked for me.
sd 2gb
i have i sd 2gb card, my pc can see it and use it but only on fat format. i cant format fat32, i get an error(not able to complete). i cant see or use it at all on my phone. (the only selection i have to format (on my pc) is fat,fat32, default unit size)
please help, so i can use the card on my pc and phone
edit:i have searched and the only thing i saw was prog. to format sd, that prog let my pc to see the card, but lost the ability to see it in my phone. (sorry i dont remember what the prog was)
A very good (shareware) 3rd party programm comes from softwinter (storage tools)
rgs
If the PC picks it up, right click on the sd card and select format. Make sure its fat32 though. Easiest thing to do... NO 3rd party apps needed...
i guess i wasnt clear enough. my pc comes up with an error "not able to compleate" when i try to format my card in fat32 (that is when it is in my pc), but i can format fat (but thats no help for me). if i put the card in my device, it doesnt see it, so if i link my device to pc, pc doesnt see the card. so still cant format via pc.
i tried 3rd party as noted, as i thought, if my device cant see it the app cant see it.
thanks for trying, but still in the same boat.
it is a new card too, im woundering if i bought a bum card and i should return it for a new.
any suggestions welcome
Reboot pc then try again... I've had this happen too and a reboot seemed to fix the problem. Just a psychotic computer problem...Sometimes pcs can be..... TROUBLE..
Cheers...
i tried that again, still doesnt work. but i did see autoplay run this time, i think that may be my prob.. 2 progs. trying 2 run on the same source at the same time. now trying to find a way 2 shut it off (like i really need it anyway)

2gb Sandisk MicroSD Card wont format, cant read on PC

my 2gb card wont work anymore, i can format it countless times through my tp2 but when i plug it into my pc as disk drive it shows up as a removable drive like it should, but i click on the drive and it says it needs to be formatted, but before i can finish formatting, it says windows was unable to format it, i can access it on my pc through windows mobile device center, but i need to be able to access it through "my computer" any suggestions on how to fix this? i tried using a card reader but it wont show up at all, and i always lose my card readers anyways so i prefer to stick to usb cables
jon_ecton said:
my 2gb card wont work anymore, i can format it countless times through my tp2 but when i plug it into my pc as disk drive it shows up as a removable drive like it should, but i click on the drive and it says it needs to be formatted, but before i can finish formatting, it says windows was unable to format it, i can access it on my pc through windows mobile device center, but i need to be able to access it through "my computer" any suggestions on how to fix this? i tried using a card reader but it wont show up at all, and i always lose my card readers anyways so i prefer to stick to usb cables
Click to expand...
Click to collapse
Maybe it's just time to get a new card. They're awfully cheap. You can replace a 2GB microSD card for about a dollar. I'd suggest getting a higher capacity, though.

[Q] memory card problem

Alright, I have a 2gb memory card which had worked fine until I started rooting my phone and doing all that stuff. Now the phone detects the memory card and it's working fine, but the pc detects that there's some storage thing but doesn't really recognize it. It doesn't even show how much space the card has or anything, it's just disk E. Yes, I do mount the memory card when it asks.
Are the drivers for your device installed on your pc?
I think so, yes. But just in case, where can I get a pc suite or something with the drivers?
I've just tried reinstalling amon ra, and the phone pugged to the pc just fine. I think this happened because of the phone reset. Someone had the same probem and says refashing heped him, but how can I reflash if I can't even put the zip file into the memory card?
iksD said:
I think so, yes. But just in case, where can I get a pc suite or something with the drivers?
Click to expand...
Click to collapse
What device do you have?
Vodafone 845/huawei u8120
Try placing your sd card in the card reader on your pc, then putting the rom on it so you can reflash it.
no micro sd card reader in my pc, only sd and others.And I don't have an adapter
sometimes when i connect the phone the memory card gets dec=tected but only for like half a second and then just doesn't recognize it anymore
Anyone? I press mount in the usb setting and the drive appears but when I click on it it says ''please insert a disk to drive J''. I've found some search results via google on this but nothing worked for me. My phone is vodafone 845

SD Card won't mount

I've looked at the other threads on this but, none seem to match my problem.
I've a 16 GB MicroSD card in my S2. S2 is not-rooted running stock ROM.
This card used to mount ok. It no longer will.
In Settings->Storage, space reported is unavailable (because it's not mounted).
I can run Format SD Card option which returns quickly.
Running Mount SD Card, it's says Mount in Progress but it never completes.
If I put the card into an SD card reader, it looks fine. FAT32 formatted card, with approx 16GB available.
Any ideas?
PeteW said:
I've looked at the other threads on this but, none seem to match my problem.
I've a 16 GB MicroSD card in my S2. S2 is not-rooted running stock ROM.
This card used to mount ok. It no longer will.
In Settings->Storage, space reported is unavailable (because it's not mounted).
I can run Format SD Card option which returns quickly.
Running Mount SD Card, it's says Mount in Progress but it never completes.
If I put the card into an SD card reader, it looks fine. FAT32 formatted card, with approx 16GB available.
Any ideas?
Click to expand...
Click to collapse
I had similar problems with two other sd cards.
First running without any problem, and then suddenly the message appeared that the sd card is empty or not connected.
In both cases, the sd card was broken.
But in my cases, the sd card could not be used in a USB adapter by PC either.
As the sd cards were nearly new, I could make a warranty replacement and now I have got a card which works fine for about two months.
You can check this, by switching the sd card into another phone.
And use another sd card in your phone.
If the other card will work in your phone and your sd card will have issues in the other phone too, replace the broken sd card.
Good luck !
P.S.: You should format the sd card with your phone and not by your PC.
Other MicroSD Card works
It_ler said:
You can check this, by switching the sd card into another phone.
And use another sd card in your phone.
If the other card will work in your phone and your sd card will have issues in the other phone too, replace the broken sd card.
P.S.: You should format the sd card with your phone and not by your PC.
Click to expand...
Click to collapse
Thanks for the response. I should have said that another 4GB card worked in the phone ok. This did lead me to think it was a card problem. However, he fact it works via a PC indicates otherwise.
Will try it in another phone.
Just throw it away?
Has anyone seen this before i.e. not working in phone but ok in SD reader?
If so, did you manage to resurrect it? Or is it time to throw it out?
PeteW said:
Has anyone seen this before i.e. not working in phone but ok in SD reader?
If so, did you manage to resurrect it? Or is it time to throw it out?
Click to expand...
Click to collapse
Try this. Settings>Application>Development
Check usb debugging.
Connect phone to pc. In notification bar click "usb connected" message, and click on "connect usb storage" button. You won't see the sd card mounted in pc!
Now disconnect phone, reboot. It might mount
See if there's any luck.
Since you're not rooted, solutions are quite limited in numbers
droidphile said:
Try this. Settings>Application>Development
Check usb debugging.
Connect phone to pc. In notification bar click "usb connected" message, and click on "connect usb storage" button. You won't see the sd card mounted in pc!
Now disconnect phone, reboot. It might mount
See if there's any luck.
Since you're not rooted, solutions are quite limited in numbers
Click to expand...
Click to collapse
Tried disconnecting and rebooting in 2 senses of the word
1. Hitting the disconnect usb storage button on screen
2. unplugging the usb cable.
Unfortunately, neither worked.
i'm having this problem now both on internal and external sdcard... it wont even mount on recovery... i'll try see if i can this done.. Windows damages everything.. i made a cleanup of the sdcard and a format..

[Q] SD-Card Failed - Not Recognised

Hello Guys.
I own a Samsung Galaxy S iii and I have insterted a Micro SD 8GB Card, which I was using for quite a while.
The other day, while on a trip and taking pictures, the SD Card got full and from that instant forward the phone stopped recognised it for some reason. It gives the following message: - SD Card Blank or it has an unsupported file...
I have also used an adapted to connect it on the computer, but the pc does not recognise it either.
Therefore, my question is: Is there some way I can retrieve the data (pictures) from the SD Card?
Thanks.
Download the sd formatting tool and use your pc to full format the card, if that doesn't work then bin it and buy a new one.
As for the data, the file allocation table probably corrupted when the card was filled. If you search on Google there are programs for the pc that might repair parts of it but I doubt you will get much back, it's like trying to unscramble eggs.
skoumprex said:
Hello Guys.
I own a Samsung Galaxy S iii and I have insterted a Micro SD 8GB Card, which I was using for quite a while.
The other day, while on a trip and taking pictures, the SD Card got full and from that instant forward the phone stopped recognised it for some reason. It gives the following message: - SD Card Blank or it has an unsupported file...
I have also used an adapted to connect it on the computer, but the pc does not recognise it either.
Therefore, my question is: Is there some way I can retrieve the data (pictures) from the SD Card?
Thanks.
Click to expand...
Click to collapse
before formatting your sd just try mounting the sd card on your pc with some sd card connectors.
MoonBlade said:
before formatting your sd just try mounting the sd card on your pc with some sd card connectors.
Click to expand...
Click to collapse
Unfortunately the computer does not recognise the card at all, therefore i guess I have lost all the data..
Thanks anyway.
You can try data recovery software might work
sent from the state where marijuana is NOT illegal !

Categories

Resources