Note no longer rooted after ICS update - AT&T Samsung Galaxy Note I717

Got my Note the day that the local ATT store had it in stock. Rooted it the next day with Odin with no problems. I updated to the official ICS this morning but now its no longer rooted. I am sure there is a simple fix, and mabye I have become delerious in my frantic search for a solution, but everything I have tried thus far has not worked. Obviously I was probably supposed to return to stock before updating. Any lamens termed help would be appreciated. This is the third phone I have rooted, but I dont keep up with this stuff after I get them rooted.
Thanks in advance!

Root it the same way you did before. First you need to install clockwork through odin. Then install SU through CWM.

Unless I missed a step, Odin gave me the "Fail" indicator.

You are not mixing up the CWM tar and the Superuser zip are you?

Related

Root Problem. [RESOLVED]

Up until today, I've been rooted. Used the SuperOneClick program. It was a piece of cake.
Today, I decide to check for new software updates..Two new ones.
I updated them and now I'm running 2.2.2 and ed05. Well I'm assuming that's the problem.
Because I've been going through the process today of backing up my ROM and stuff, to flash MIUI for the first time. Well, nothing seemed to work.
I tried to backup my current ROM, but nothing happened. (Should've rebooted and come back on, like normal after 'backup current ROM' was selected and a name was entered for it; Didn't happen. )
So I figured that the new software updates unrooted my phone.
So I go back into SOC and root my phone again, but during the process, it tells me that I'm already rooted. Finishes the process and I reboot my phone, etc.
Well the Superuser app is in my list now, but none of the root-required apps are working. They all tell me that I'm not rooted. I even used Root Check to see the status. It tells me as well, that I'm not rooted.
I go back to the SOC program and UNroot. Well that was successful. I reboot, etc.
No Superuser app. So far so good. So I go BACK again and root, everything went well, except when it said an 'su' command was sent to my phone, I never got one, but I still got the Superuser app. And still, the apps tell me I'm not rooted.
Any kind of help is great. I really appreciate all the time, spent reading this.
Sorry if I went on and on, but it's bugging me now and I really need some answers to what the problem might be. Thanks, guys. ;(
superoneclick does not work on ed05
you need to odin cwm recovery
then reboot into recovery using three finger method
install root.zip file
then reboot
directions for rooting with odin is here:
http://www.galaxyforums.net/forum/fascinate-rs-guides/1967-how-root-froyo-gingerbread-your-fascinate.html
SOC does work with ED05.. I've used it several times, different phones.
Really? I thought quite a few folks were having trouble with soc after the ota ed05 update? If thats the case, then thanks for the clarification... although odin is still another option for the op since soc is not working.
droidstyle said:
superoneclick does not work on ed05
you need to odin cwm recovery
then reboot into recovery using three finger method
install root.zip file
then reboot
directions for rooting with odin is here:
http://www.galaxyforums.net/forum/fascinate-rs-guides/1967-how-root-froyo-gingerbread-your-fascinate.html
Click to expand...
Click to collapse
I read most of the first page on that thread, mostly just read the latest replies about that method. I'll read the full directional tutorial once I'm clarified of questions.
I think I read a couple of users saying this does root your phone, but it will wipe all data as well? I'm not quite sure. I want my phone rooted, no matter if I install MIUI or not. I don't want a factory reset though.
Thanks droidstyle, I'm back to being rooted!
Now onward to flashing MIUI! Wish me luck.
:^)

[Q] AT&T "Software Update" is available?

My phone is running stock, but it is rooted. Earlier today my phone showed a message saying an update was available from AT&T. Is it safe to install updates like this or will it brick my phone?
I don't mind if I have to root it again, but I would like to make sure It won't break anything else beforehand. CWM Recovery is installed.
I've attached a screenshot.
Edit: It doesn't look like this update is worth it: http://forums.att.com/t5/Samsung/Samsung-Galaxy-S2-SGH-i777-2-3-6-OTA-update-now-live/td-p/2996495
Its safe but you will need to reroot .
jje
XGhozt said:
My phone is running stock, but it is rooted. Earlier today my phone showed a message saying an update was available from AT&T. Is it safe to install updates like this or will it brick my phone?
I don't mind if I have to root it again, but I would like to make sure It won't break anything else beforehand. CWM Recovery is installed.
I've attached a screenshot.
Click to expand...
Click to collapse
1. I would hope that a carrier update would have gone through the necessary QA to make sure they don't brick user's phones.
2. If you are getting this message, I HIGHLY doubt you have an I9100. You probably have an SGH-i777 (ATT specific model), or the Skyrocket (SGH-i727). So you would be in the wrong forum.
3. You will ALWAYS have to re-root after firmware updates. I believe CWM Recovery is attached to whatever kernel you have as well, so a firmware update will ALSO remove that. So you will probably have to re-flash your stock custom kernel after the update.
But again, as in #2, I'm only guessing since an I9100 user would likely NEVER get this message.
Yes, I posted in the wrong forum. My mistake. I used the "Find your Device" in the top right and it took me here. Normally I post in the other section.
Maybe a mod can move it for me.
Thank you for the feedback guys, I just wanted to make sure.
You say you have ClockworkMod Recovery installed. That means you have a custom kernel, probably with stock UCKH7 and root. If that is the case, the update will probably fail because of the kernel.
You can be on fully stock UCKH7 plus root, and successfully do the OTA update to UCKK6. In that case, you will retain root.
There are several threads about updating, too many really. Please look through other threads for more info.

[Q] Frustrating Problem With Rooting

Hi guys. I have a Samsung Galaxy s3 GT-i9300 running 4.1.1 Baseband 19300XXDLIB.
I have been trying and trying and trying for the last few days to root my mobile. I take care following all of the steps and I have tried every type of root program and files I think are available but even though they download to the phone and reboot into their custom recovery, then install the files needed to root, none of them have worked!!
It's strange because the phone is just unrootable it seems. I have tried several versions of Odin. I've tried what should be 1 click rooters but nothing works! The most recent files I have used to download to my phone via Odin were CF-Auto-Root-m0-gti9300, CF-Root-SGS3-v6.4, SuperOneClickv2.2-ShortFuse, SuperOneClickv2.3.1-ShortFuse and SuperOneClickv2.3.3-ShortFuse all of which have been recommended to me and I have strictly followed YouTube videos and written guides. I don't think I am doing anything wrong yet I still have no root access. The last root I tried installed a CWM app (I know it stands for Clock Work Mod but not sure what I am supposed to do with it) but not SuperSU which is supposed to come with it.
Please can someone help? I'm tearing my hair out here!
I should probably point out I am not using the stock ROM as I did manage to brick my phone at one point and had to install another firmware, although I would like to go back to my original firmware yet I am not sure what it was...is it possible to figure out what the stock firmware should be? The phone is unbranded from the UK.
Many thanks
I should probably point out I am not using the stock ROM as I did manage to brick my phone at one point and had to install another firmware, although I would like to go back to my original firmware yet I am not sure what it was...is it possible to figure out what the stock firmware should be? The phone is unbranded from the UK.
No you can only guess .
TO ROOT .
Factory reset the phone and install CF root 6.4 via Odin .
But its really pointless rooting when you don't have a clue as to why or what .
BASICS .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
May also be because your computer hasn't been installed with the samsung drivers yet? Kies i think it's called..
Have you tried downloading supersu from the play store? And be sure to not try superuser but supersu.
I had the same thing with cf-autoroot. supersu wasn't there and I didn't have root. Tried several times, never worked. After that I tried rooting with the old cf-root that also installs cwm recovery. Recovery was there but no supersu and the phone didn't get root. Tried that several times too but that didn't help either, although that is how I rooted my phone successfully right after I had bought it. Went back to cf-autoroot, same result, no root. But as soon as I downloaded the app supersu manually and updated the binarys as it tells you to at first start, I had root.
Zelmer said:
May also be because your computer hasn't been installed with the samsung drivers yet? Kies i think it's called..
Click to expand...
Click to collapse
Kies is not required (and its junkie bloatware that doesn't properly clean itself up on uninstall anyway)
Windows can pull the drivers from WU.
You Sir, are a legend! Thank you very much, you have sorted my problem I had SuperUser instead of SuperSU like you stated. Who would've thought it'd be so easy to fix?
shamez23 said:
Have you tried downloading supersu from the play store? And be sure to not try superuser but supersu.
I had the same thing with cf-autoroot. supersu wasn't there and I didn't have root. Tried several times, never worked. After that I tried rooting with the old cf-root that also installs cwm recovery. Recovery was there but no supersu and the phone didn't get root. Tried that several times too but that didn't help either, although that is how I rooted my phone successfully right after I had bought it. Went back to cf-autoroot, same result, no root. But as soon as I downloaded the app supersu manually and updated the binarys as it tells you to at first start, I had root.
Click to expand...
Click to collapse
You should probably not just imagine that just because someone has a problem that they don't have a clue what they are doing. I have done this numerous amounts of times with several phones, my Samsung was just slightly more difficult since I had made an easy mistake by not taking note of my original firmware and by not realizing that I needed SuperSU and not SuperUser (which I'm sure is a common and easy mistake).
Try next time not to put a fellow site member down.
JJEgan said:
I should probably point out I am not using the stock ROM as I did manage to brick my phone at one point and had to install another firmware, although I would like to go back to my original firmware yet I am not sure what it was...is it possible to figure out what the stock firmware should be? The phone is unbranded from the UK.
No you can only guess .
TO ROOT .
Factory reset the phone and install CF root 6.4 via Odin .
But its really pointless rooting when you don't have a clue as to why or what .
BASICS .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Click to expand...
Click to collapse
I did actually install Kies but thanks for the help anyway
Zelmer said:
May also be because your computer hasn't been installed with the samsung drivers yet? Kies i think it's called..
Click to expand...
Click to collapse

Pantech Flex Jelly Bean Released!

Just got to know that Pantech has released the much awaited Jelly Bean 4.1 for the Flex through OTA AT&T software update.
Like many others, I'm using the flex outside US, therefore, cannot update my flex.
Would request someone to upload the OTA JB zip file.
Can't wait to see Jelly Bean on the Flex.
PS: Check out the Pantech website for this great news
This is good news. I wish I wasn't rooted with CWMR so I could get this. Tried flashing stock recovery.img and boot.img files but get NOT SUPPORT.
Anyone know a way to get this phone back to complete stock so we can get the Jell Bean goodness?
I managed to unroot and restore stock recovery.
Got prompted for the update, it downloaded and installed fine!
This little Flex seems quite a bit better with Jelly Bean. Wish it had been 4.2 but 4.1 is fine.
Tersanyus said:
I managed to unroot and restore stock recovery.
Got prompted for the update, it downloaded and installed fine!
This little Flex seems quite a bit better with Jelly Bean. Wish it had been 4.2 but 4.1 is fine.
Click to expand...
Click to collapse
Can you upload the update file?
How did you unroot?
Sent from my PantechP8010 using xda app-developers app
Not rooted anymore so probably can't get the update file. It was like 264MB or something.
Not planning to root this phone again.
Interesting that the Pantech diag menu shows still rooted and tampered, it's definitely not rooted.
It should be 100% stock.
If you know of a way to get the file off the phone I can look for it.
---------- Post added at 01:09 PM ---------- Previous post was at 12:52 PM ----------
I knew from experience I had to go to stock recovery and unroot to update.
I flashed a stock rooted nandroid backup I had made after rooting initially.
To unroot I think I went into the SuperUser app and choose option to unroot.
Stock recovery file is posted in a thread here somewhere, had recovery.img and boot.img.
Tried flashing those in fastboot but only got NOT SUPPORT mesage.
I took a flashable zip file that had CWM recovery.img file in it and replaced it with the stock recovery.img and flashed it in CWM.
Once stock recovery was on the phone when I tried to use it I only got a little android symbol lying on its back with a red exclamation point.
Phone booted fine and worked ok
Couldn't get it to see the AT&T update until this morning.
Things I have noticed in this new Jelly Bean build for our little Flex:
Of the stock AT&T apps only 3 I could disable (ugh), why no Disable button
good news
Tersanyus said:
Not rooted anymore so probably can't get the update file. It was like 264MB or something.
Not planning to root this phone again.
Interesting that the Pantech diag menu shows still rooted and tampered, it's definitely not rooted.
It should be 100% stock.
If you know of a way to get the file off the phone I can look for it.
Click to expand...
Click to collapse
Basically you will find the update in the /cache folder.
I'm not sure if you you can access this folder without being rooted. You can give it a try using the ES File Explorer.
Let me know if you get the update.
ES File Manager did see the cache folder and all the other system folders. It was empty. I'm sorry, I factory reset the phone last night from stock recovery since it was not updating built in apps properly. Never seen stock recovery on this phone before. It has an option for root. I selected it. Downloaded a few root checker apps, not rooted.
I'm sorry if I hadn't reset it last night I might have found the file. I'm sure it will turn up somewhere. This little Flex doesn't have much in the way of development but someone here at XDA will get it sooner or later.
Tersanyus said:
ES File Manager did see the cache folder and all the other system folders. It was empty. I'm sorry, I factory reset the phone last night from stock recovery since it was not updating built in apps properly. Never seen stock recovery on this phone before. It has an option for root. I selected it. Downloaded a few root checker apps, not rooted.
I'm sorry if I hadn't reset it last night I might have found the file. I'm sure it will turn up somewhere. This little Flex doesn't have much in the way of development but someone here at XDA will get it sooner or later.
Click to expand...
Click to collapse
Oh that's bad!
Actually, there's another way. If you can share your system nandroid backup, maybe that can help.
Try Rooting
Tersanyus said:
ES File Manager did see the cache folder and all the other system folders. It was empty. I'm sorry, I factory reset the phone last night from stock recovery since it was not updating built in apps properly. Never seen stock recovery on this phone before. It has an option for root. I selected it. Downloaded a few root checker apps, not rooted.
I'm sorry if I hadn't reset it last night I might have found the file. I'm sure it will turn up somewhere. This little Flex doesn't have much in the way of development but someone here at XDA will get it sooner or later.
Click to expand...
Click to collapse
Why dont you try to root with this method http://forum.xda-developers.com/showthread.php?t=1886460 ,its the same you used to root 4.0.4 I guess, should work, pull out the update and then unroot the phone as you dont want it rooted.
It happened to me, even rooted I wanst able to see /data content with ES File Blablabla, then tried with root explorer and worked fine.
I'm not going to root this Flex. It's not a primary phone for me (never was). It is used as a spare now and can be used by novice users in my family and friends. Don't want them to have a rooted phone. I'd been wanting to get this phone back to complete stock for a while but hasn't really put much effort into it.
When I saw that Pantech released JB for Flex a few days ago that was my motivation to get it back to stock. Frankly I was surprised I was able to get it back to stock and not brick the phone!
I'm uploading the stock rooted rom I have. Luckily I saved that on my computer. It's uploading to Dropbox now so it will take a while.
Thanks for your help
Tersanyus said:
I'm not going to root this Flex. It's not a primary phone for me (never was). It is used as a spare now and can be used by novice users in my family and friends. Don't want them to have a rooted phone. I'd been wanting to get this phone back to complete stock for a while but hasn't really put much effort into it.
When I saw that Pantech released JB for Flex a few days ago that was my motivation to get it back to stock. Frankly I was surprised I was able to get it back to stock and not brick the phone!
I'm uploading the stock rooted rom I have. Luckily I saved that on my computer. It's uploading to Dropbox now so it will take a while.
Click to expand...
Click to collapse
Well, thanks for the file, I'm outside US and even on stock, update notification doesn't prompt.
I got mine back to Stock, but when I hit check for upgrade it says..."Previous session is running. Please Try Later"
I have wiped it several times. any ideas?
Wait...
kneemeister said:
I got mine back to Stock, but when I hit check for upgrade it says..."Previous session is running. Please Try Later"
I have wiped it several times. any ideas?
Click to expand...
Click to collapse
I can see ATT's software updater sucks, we just can wait for our friend's upload.
Here it is: Link removed, Dropbox suspended it.
That should be a stock but rooted rom. Nothing else done to it at all. At least. I had that on the phone for a while as a backup when I was playing with roms for the flex.
Probably only going to leave this link up for a day. I'd make your own nandroid backup first. You'll probably get an md5 error in CWMR but there are instructions for fixing that around. I think it was ADB commands that had to fix it. I know the instructions for clearing the md5 error are in one of the flex rom threads, not that there were many of those. The standard disclaimer applies, if this nandroid backup bricks your phone, I can't help you.
I got the same previous session message too. Then it said no update after wiping. I think the best thing is just wipe and don't check for updates. Leave phone on, wifi on and wait for the phone to check on it's own. I got the prompt in a few hours.
Hope this helps you.
So, need to flash stock recovery after restoring nandroid correct?
Sent from my PantechP8010 using xda app-developers app
Likely if you do not flash stock recovery in CWMR the update will fail. I tried to take the update before flashing stock recovery, it failed each time. I had already unrooted though. Pretty much what I have learned from flashing various phones over the years is that if you are not stock completely any OTA updates from the carrier will fail or soft brick your device.
I think the Flex was one where I had just that issue. There was some AT&T update a few months back, I said to apply it and I got stuck in recovery. Every time I rebooted the phone it just booted to recovery. Found out if I went into the diag screen on the Flex and choose reboot from there I could boot normally. Eventually I figured out I had the wrong boot.img on the phone. Once that was fixed the phone booted fine. But the update never worked.
You can try to take the update with CWMR but I doubt it will work and could brick or soft brick. I've learned to never take an OTA update from the carrier if you are not completely stock.
Still waiting
Tersanyus said:
Likely if you do not flash stock recovery in CWMR the update will fail. I tried to take the update before flashing stock recovery, it failed each time. I had already unrooted though. Pretty much what I have learned from flashing various phones over the years is that if you are not stock completely any OTA updates from the carrier will fail or soft brick your device.
I think the Flex was one where I had just that issue. There was some AT&T update a few months back, I said to apply it and I got stuck in recovery. Every time I rebooted the phone it just booted to recovery. Found out if I went into the diag screen on the Flex and choose reboot from there I could boot normally. Eventually I figured out I had the wrong boot.img on the phone. Once that was fixed the phone booted fine. But the update never worked.
You can try to take the update with CWMR but I doubt it will work and could brick or soft brick. I've learned to never take an OTA update from the carrier if you are not completely stock.
Click to expand...
Click to collapse
Im on stock and I cant update, no root, stock recovery, Ive been waiting for the update and nothing.
I dont know if is because Im outside US
I got mine back to stock and unrooted, but the upgrade still fails at about 25% and reboots. If I clear cache and wipe, it will download again, then fail again. Even after flashing back to stock, recovery still says rooted and so does the software upload screen. But I have confirmed that I am no longer rooted. I am about to give up.

[Q] Update from 4.3 to 4.4.2? root removed. Backup actually backed up?

Hello. I have done quite a bit of searching, just can't find a similar enough post to tag on some questions. Sorry if this has been asked...but I did look over a month of posts, and google searching.
I have a Note 3 from September, rooted in October...not sure how I got it done...but I jumped the gun and unrooted it with SU thinking I would be able to OTA to 4.4.2. Nope!
So, I am stuck on 4.3.
My big question is how can I get to 4.4.2 with OUT starting over on the phone.
I guess this is a backup question. I have some settings turned on that indicate that a back up is going somewhere, but I can't confirm, and I don't know what all is backed up.
Pictures are backed up, but I would hate to lose them. They are on SD card anyway...so I realize I could take the card out, but something I read suggested I might lose even the micro-simm card contents. Not sure how that would be possible.
But what about things like Quick Notes, and S Note, and Contacts, and all of my apps that I have installed, and settings for those apps.
When I rooted back in October, it worked with out disrupting anything.
How can I get that to happen now WITH an upgrade to 4.4.2 AND getting it rerooted?
If I can't upgrade with out wiping it clean, I am probably going to stay put. So, then what is the best way to root to get "Wifi Tether Router" back working...as it is the only thing I need the phone rooted for.
Finally, what is the difference between NC5 and NC5D. I saw a recent post of somebody else asking it...but none of the replies gave an answer.
Thanks for any feedback.
I don't know if this will help, but you can give it a try. First, you might want to consider that you are where most of us are trying to get back to ( i.e. 4.3 with no KNOX !!! ). Ok, I would go to Samsung Firmware, and download the latest version of 4.4.2 NC5 to your PC. I would backup that copy of 4.3 on your device to your sdcard then if have an ext sdcard copy it there, or copy that backup to your pc. Most of your Pics and data should be in that backup, that you can copy back later with a file explorer like Root Explorer. Now do a factory wipe. Then take the NC5 zip you got from sammie and extract it to a file on your desktop this will change it to a .tar file. Find a copy of Odin v1.85 don't use the 3.09 version on the Samsung website if possible. Cool, reboot your device into download mode, start odin, plug in your device to your PC. Now, load that extracted file on your desktop into PDA odin, and click start. It will take minute to read Md5 then start installing. You will lose root and recovery !!! Your new bootloader will have KNOX 0x0. So, you will have to start over with the root process, but isn't that half the FUN !!! Chainfires v1.94 supersu will root NC5. As for the difference between NC5 and NC5D, It is my understanding they are the same. The D stands for a version of NC5 that was used by Samsung employees ( i.e. programmers and developers ) in the development of NC5. :fingers-crossed::fingers-crossed:
Lokerd, I see you have read my response. Great!!! I would add the you can root 4.4.2 NC5 several ways. As I said above Chainfires v1.94 SuperSu, and One click autoroot, and Towelroot for 4.4.2. All should root your device without tripping KNOX. However, as soon as you flash a new custom recovery like TWRP or Philz CWM ( my favorite ) it will trip KNOX. If you are out of warranty no biggie, besides you need a custom recovery if you want to get back to your 4.3 backup. ( By the way remember you need the same recovery (i.e. TWRP or CWM ) that you made the 4.3 backup with, now on NC5 just a newer version. This will make it easier to recover the 4.3 backup later. They say the most popular recoveries will recover each others backups, but that is rarely the case.
jimzweb1 said:
First, you might want to consider that you are where most of us are trying to get back to ( i.e. 4.3 with no KNOX !!! ).
Click to expand...
Click to collapse
Thanks for taking the time to reply! And to reply with such a nice well though out steps.
So...I should NOT being trying to upgrade? I can do that...just reroot and be done with this. I really don't want to risk having to lose info I have put on the phone, etc. A few new features is not going to be worth it. But, reading about improved 4g and wifi performance. Wifi calling is not important to me. But it would be nice to have the camera on the lock screen...but I bet I could find something that would do that the rooted phone I had.
So, let me ask this. If I do not care about KNOX, is the process you outlined above any easier?
Thanks!
Drew
lokerd said:
Thanks for taking the time to reply! And to reply with such a nice well though out steps.
So...I should NOT being trying to upgrade? I can do that...just reroot and be done with this. I really don't want to risk having to lose info I have put on the phone, etc. A few new features is not going to be worth it. But, reading about improved 4g and wifi performance. Wifi calling is not important to me. But it would be nice to have the camera on the lock screen...but I bet I could find something that would do that the rooted phone I had.
So, let me ask this. If I do not care about KNOX, is the process you outlined above any easier?
Thanks!
Drew
Click to expand...
Click to collapse
Well, if you are out of warranty, and you don't care about KNOX go ahead and upgrade. But, consider this: One, so where clear the only reason for the 4.3 backup is to get to your pics and data at a later time. Here is a link about trying to go back http://forum.xda-developers.com/showthread.php?t=2630514 Once you install 4.4.2 NC5 ( this will include a new kernel, bootloader, baseband, and OS ) you CANNOT go to back to 4.3. If you try to install the 4.3 backup after you have upgraded to NC5 you will soft brick your phone. Then, there's KNOX what is KNOX, KNOX is security software written by the NSA for Samsung. Now I'm not saying its spyware, but Samsung is !!! You can go to Samsung's website and all the info about KNOX you need is there.
To answer your last question, no. You have to go through all the motions.
If it was me, knowing what I know now. I would stay at 4.3, install an engineering bootloader (read up on bootloaders they are not forgiving if you mess up ) then try to upgrade basebands. Here is a link for NAB engineering bootloader which should be 4.3, http://forum.xda-developers.com/showthread.php?t=2655674 Here is the link for a NC5 baseband, http://forum.xda-developers.com/showthread.php?t=2701837 I believe this will improve your 4G lte.
Last, what I'm running. I run Note 3 "Sprint" 4.4.2 NC5 ( no choice bought the device new with that OS, voided my warranty the second day I owned it ). Rooted with Philz CWM recovery ( hltespr v 6.12.9 ) KNOX disabled and removed. I definitely like 4.4.2 NC5 a lot better than 4.3 my daughters Note 3 had 4.3 before I upgraded to 4.4.2 and rooted it. Here is my XDA website http://forum.xda-developers.com/showthread.php?t=2770729 so if you do upgrade this is a good place to start.
Ok. Sorry for more noob questions.
Ok, the only thing I want to ensure is that I don't lose things like S Note, Action Memo, Contacts, Pictures, apps installed. I just don't want to redo everything. Basically, I just want to upgrade the operating system and have everything up and running like it was...just new OS. Is that possible? I understand what you are saying about not being able to use the back up. I guess I just don't understand if I can upgrade this phone with out having to start back over with everything.
I am not out of warranty (purchased October 2013), but I don't see that it would be a problem. I normally don't break or drop my phone...although I did drop it and picked up a nick a few weeks ago. It was unusual circumstances. Point is...I guess I will worry about warranty issues if that comes up. On the other hand, the home button is a getting a little finicky, so I avoid it...using swipe down, and a notification toggle to go to Home whenever possible.
I don't understand the difference between bootloader vs. flashing vs. upgrading basebands vs. rooting as opposed to those other things. it doesn't help that there are multiple ways to do each of the above.
I think I am in over myhead.
Can you help me figure out what I had done before...as it was working pretty good. I Rooted it to get root access, but not sure how I did it. It was easy, and it didn't erase anything. I think I simply used Odin. Attached is a screenshot of a folder of stuff that I might have used. Can you tell what root method I used?
I think I am just going to go back to what I had...and still with 4.3. I actually looked at my wife's identical phone that is on 4.4.2 and other than wifi calling, I don't see the camera on lock screen, so I don't really think I should be messing with stuff I can't wrap my mind around trying to get to 4.4.2.
lokerd said:
Ok. Sorry for more noob questions.
Ok, the only thing I want to ensure is that I don't lose things like S Note, Action Memo, Contacts, Pictures, apps installed. I just don't want to redo everything. Basically, I just want to upgrade the operating system and have everything up and running like it was...just new OS. Is that possible? I understand what you are saying about not being able to use the back up. I guess I just don't understand if I can upgrade this phone with out having to start back over with everything.
I am not out of warranty (purchased October 2013), but I don't see that it would be a problem. I normally don't break or drop my phone...although I did drop it and picked up a nick a few weeks ago. It was unusual circumstances. Point is...I guess I will worry about warranty issues if that comes up. On the other hand, the home button is a getting a little finicky, so I avoid it...using swipe down, and a notification toggle to go to Home whenever possible.
I don't understand the difference between bootloader vs. flashing vs. upgrading basebands vs. rooting as opposed to those other things. it doesn't help that there are multiple ways to do each of the above.
I think I am in over myhead.
Can you help me figure out what I had done before...as it was working pretty good. I Rooted it to get root access, but not sure how I did it. It was easy, and it didn't erase anything. I think I simply used Odin. Attached is a screenshot of a folder of stuff that I might have used. Can you tell what root method I used?
I think I am just going to go back to what I had...and still with 4.3. I actually looked at my wife's identical phone that is on 4.4.2 and other than wifi calling, I don't see the camera on lock screen, so I don't really think I should be messing with stuff I can't wrap my mind around trying to get to 4.4.2.
Click to expand...
Click to collapse
Cool, your version of 4.3 should be NAB and no KNOX. If this is the case then you should be able to root, and return back to stock, if you have say a hardware issue with your device and have to return it under warranty. So, according to your last post image on 10/24/2013 you used CF Autoroot, if you want to read up here is the link to that http://forum.xda-developers.com/showthread.php?t=2466423
Now to get to the latest version of CF Autoroot you need to go to ChainFires ( CF ) repository here is the link http://autoroot.chainfire.eu/ just find the model of your phone and click on File to download. Put that file on your desktop, now go to your android downloads copy and paste Odin v1.85 to your desktop. Click on Odin extract, and open it, now click on PDA a box will open, now select desktop and click on CF Auotroot. It should come up in Odin next to PDA. Now boot your device into download mode, then connect to your PC. In the upper left hand box will light up COMM: with some number in green, blue, or yellow doesn't matter just telling you that a connection was made. Now click start on the bottom of Odin, sit back and watch the magic!
When it says pass your done. Now reboot your phone if doesn't do it by itself go to your app drawer and see if SuperSu is there. To install the Recovery just follow the same steps just substitute the recovery .tar file in place of CF Autroot. I see you have ChainFires v1.65 SuperSu the latest version is v2.01 here is the link http://forum.xda-developers.com/showthread.php?t=1538053. If you use CF Autoroot it will probably install the latest version of SuperSu automatically.
I see on 10/25/2013 you downloaded CWM recovery for hltespr ( sprint ) here is the link for Philz CWM http://forum.xda-developers.com/showthread.php?t=2596001 the latest version for sprint is 6.12.9 I don't use his unified all in one recovery version, I use the sprint version, but the choice is yours. :fingers-crossed:
jimzweb1 said:
Cool, your version of 4.3 should be NAB and no KNOX.
Odin v1.85 to your desktop.
Click to expand...
Click to collapse
Thanks for the continued help. Just about ready to reroot the thing.
So, you mention using 1.85...is that only because that is what I have? The latest CF-Auto-Root came with 3.07 but I had already downloaded 3.09 a couple of days ago trying to figure stuff out. I also saw a warning about using the latest Odin...but I think it applied to trying to do the Kindle Fire, which I determined was 3.3 and not able to be rooted with out a special cable, which I have ordered.
Anyway, does it matter if I use the 3.07 that came with the latest version of CF-A-R? Should I use 3.09? Or def stick with 1.85.
EDIT #5: I end up using 1.85 and the original Root, then the new ROOT. So, does it matter that I used the Root from October vs the newest one or older Odin vs. newer? I have it up now, so it is just a matter of tryingt o figure this out.
BTW, I thought I had bricked my phone...went back and read YOUR instruction again, and got it restarted. The instructions on the main CF-A-R thread do not make it very clear.
Thanks a bundle!
Great !!! It doesn't matter which version of Odin you use, as long as it gets the job done. As for CF Autoroot, after your done rooting and boot the device back up. It my take awhile but you will automatically be asked update your apps, and SuperSu will update binarys at that time.

Categories

Resources