Related
Hey everyone-
I'm trying to ODIN my vibrant back to stock from eugene373's froyo rom, the one with latest one (r3 i think) with the supposedly working clockwork mod (it didn't for me :-/). Anyway, I'm able to get the phone into download mode ONLY by pushing power on and holding volume -, I've already tried turning it off and plugging in the cable and it doesn't work for some reason, but whenever it enters download mode ODIN doesn't seem to pick it up. Oddly enough, ODIN will pick up my vibrant as COM6 when it's powered on, but that's only time I can get it to work. And my vibrant IS NOT hardware locked. Thanks for any help in advance.
-bobofosho123
bobofosho123 said:
Hey everyone-
I'm trying to ODIN my vibrant back to stock from eugene373's froyo rom, the one with latest one (r3 i think) with the supposedly working clockwork mod (it didn't for me :-/). Anyway, I'm able to get the phone into download mode ONLY by pushing power on and holding volume -, I've already tried turning it off and plugging in the cable and it doesn't work for some reason, but whenever it enters download mode ODIN doesn't seem to pick it up. Oddly enough, ODIN will pick up my vibrant as COM6 when it's powered on, but that's only time I can get it to work. And my vibrant IS NOT hardware locked. Thanks for any help in advance.
-bobofosho123
Just FYI check to make sure, you swtich USB ports on the PC and also make sure you have all the right drivers installed. Looking at the pics, I see that you are not selecting the rite options. All you need is the PIT & the PDA files selected.
Click to expand...
Click to collapse
chichu_9 said:
bobofosho123 said:
Hey everyone-
I'm trying to ODIN my vibrant back to stock from eugene373's froyo rom, the one with latest one (r3 i think) with the supposedly working clockwork mod (it didn't for me :-/). Anyway, I'm able to get the phone into download mode ONLY by pushing power on and holding volume -, I've already tried turning it off and plugging in the cable and it doesn't work for some reason, but whenever it enters download mode ODIN doesn't seem to pick it up. Oddly enough, ODIN will pick up my vibrant as COM6 when it's powered on, but that's only time I can get it to work. And my vibrant IS NOT hardware locked. Thanks for any help in advance.
-bobofosho123
Just FYI check to make sure, you swtich USB ports on the PC and also make sure you have all the right drivers installed. Looking at the pics, I see that you are not selecting the rite options. All you need is the PIT & the PDA files selected.
Click to expand...
Click to collapse
yeah I tried that to, didn't work. I used the very first JFD firmware from the backup firmware thread and the .512 pit file as well and that was it, and for some reason ODIN still wouldn't pick up my vibrant. fyi, i was actually able to get it to flash to an odin copy of JI8 a couple hours ago, but now I keep getting a bunch of FC's and ODIN yet again isn't sensing the vibrant in download mode.
Click to expand...
Click to collapse
Sorry to break it to you but its most likely an issue with your computer. Try going to the local library and use one of theirs.
Try getting into download mode first than starting up Odin. If that doesn't work try it in reverse.
Just my .02, but I noticed that if I have Kies open, Odin wont see my Vibrant... Dont know if that is the cause of your problem or that you even have Kies at all.
I'm going to go with make sure you have the correct drivers installed.
If you don't have the drivers
Hit up this thread for the drivers.
Sometimes odin doesn't recognize my phone and I unplug the usb and plug it back in and it pops up..do this while still in download mode and odin open..
Sent from my SGH-T959 using XDA App
constomy said:
Sometimes odin doesn't recognize my phone and I unplug the usb and plug it back in and it pops up..do this while still in download mode and odin open..
Click to expand...
Click to collapse
Agreed. I have to do this every time, but it also works every time. As soon as I plug the USB back in Odin will show a com port has been connected, and then I'm good to go with the flashing. I'm using Windows 7 64 bit.
Dave08 said:
Agreed. I have to do this every time, but it also works every time. As soon as I plug the USB back in Odin will show a com port has been connected, and then I'm good to go with the flashing. I'm using Windows 7 64 bit.
Click to expand...
Click to collapse
Yeah I have to do it every time also...I'm running vista...
Sent from my SGH-T959 using XDA App
Dave08 said:
Agreed. I have to do this every time, but it also works every time. As soon as I plug the USB back in Odin will show a com port has been connected, and then I'm good to go with the flashing. I'm using Windows 7 64 bit.
Click to expand...
Click to collapse
I have also had success with this method. Closing odin and reopening before I re plug is what I have done and have had no issues. Vista Ultimate 64.
I need help. My vibrant is soft bricked. I can access 2e recovery but cannot get into CWM at all. I dont even have the update.zip in my internal. I can get into download mode but odin will not recognize my device. (believe me when I tell you Ive tried it all on multiple computers using different cables, usb slots, etc.). I actually fell asleep at my desk last night trying it all. My question is, can I somehow access the internal storage of my vibrant through my pc possibly ? In order to place the cwm update.zip in the root folder then enabling me to "reinstall packages" through 2e recovery ?
Any help is much appreciated. This is killing me.
Profound said:
I need help. My vibrant is soft bricked. I can access 2e recovery but cannot get into CWM at all. I dont even have the update.zip in my internal. I can get into download mode but odin will not recognize my device. (believe me when I tell you Ive tried it all on multiple computers using different cables, usb slots, etc.). I actually fell asleep at my desk last night trying it all. My question is, can I somehow access the internal storage of my vibrant through my pc possibly ? In order to place the cwm update.zip in the root folder then enabling me to "reinstall packages" through 2e recovery ?
Any help is much appreciated. This is killing me.
Click to expand...
Click to collapse
This helped me:
Originally Posted by fishman0919
Can you try flash my Odin image of KB5 with Odin v1.7 - LINK
It at the bottom of the post. Make sure "Re-Partition" is checked.
It will drop you into Voodoo recovery after... do a factory wipe and then reboot.
Click to expand...
Click to collapse
Sounds like driver issues.. There was a similar post about this the other day. Here is a link that could help you.
http://forum.xda-developers.com/showthread.php?p=26861898
Sent from my SGH-T959 using XDA
Profound said:
I need help. My vibrant is soft bricked. I can access 2e recovery but ...................
Click to expand...
Click to collapse
I gotta get my phone on a charger, so will have to wait and search for the post in a little while, but another person had this issue, and had luck with a windows software that was like an android file explorer or something. Was able to save all his pictures and files. Surely you could also use it to transfer update.zip back to the internal sd.
I will look for that post and get back to you.
Update: this is the thread I was referring to. Hope this helps. I haven't used it, but if it can copy files from the internal, theres the chance it will copy files TO the internal... Good luck!
http://forum.xda-developers.com/showthread.php?p=26783165
Sent from my SGH-T959 using XDA
I can never get ODIN to recognize my phone on Windows7. I always have to use my old PC running XP. Also other devices being plugged into the PC have been known to bork up ODIN.
Good luck!
Sent from my SGH-T959 using xda premium
This package includes:
Repartitioning: Repartition to stock JFD
Reloading: IBL/PBL, PARAM, SBL, SBL2, Kernel, Recovery, FactoryFS and modem
formatting:Cache, DBdata, Data
You may use this code to reformat the SDCard *2767*3855# There is no way to do this from Download Mode. The code will leave the EFS untouched.
This package does not wipe:
SDCard (where your pictures are stored)
EFS(Where your serial number and carrier information is stored)
Instructions:Get the latest version of java here: http://java.com/en/download/installed.jspPut your phone into "Download Mode"Run the program once, and if it does not work, then check the "Flash Bootloaders" checkbox and flash again
Your device will end up as it came from the factory with UVJFD
Download:
Download UVJFD Heimdall One-Click
http://teamkomin.com/Vibrant/T959-UVJFD-Stock-One-Click.jar
Credits:
Thanks to gregc2009 for pointing me at the firmware
This package contains bootloaders from this link: http://forum.xda-developers.com/showthread.php?t=1117990
This package contains UVJFD firmware from this link: http://rootzwiki.com/showthread.php...pps-*-everything&p=11409&viewfull=1#post11409
This package is intended for:
Linux 32
Linux 64
OS-X Leopard
OS-X Snow Leopard
OS-X Lion
Windows XP
Windows Vista
Windows 7
REPARTITIONING ISSUE WITH HEIMDALL 1.3.0
Heimdall currently has an issue with repartitioning. 99% of the time you will not need to repartition. Failure to follow these directions can possibly lead to bricking:
Do not flash bootloaders if you see this message:
Local and device PIT files don't match and repartition wasn't specified!
This message means your partition tables do not match the firmware.
You will need to use Linux to repartition with this firmware package. Install Ubuntu. In Linux, you can copy-pasta this into the terminal to correct the repartitioning problem and then flash bootloaders. http://forum.xda-developers.com/showpost.php?p=17485056&postcount=23
Check this out. Its a way to fix without Odin.
This post is from vibrant dev thread, from AdamOutler
SGH-T959 ICS Gummy 1.2
i picked it up used with stock rom, no mods. i rooted, then installed nero v3 with voodoo and then v5 with voodoo.... then i tried a custom battery mod and it screwed my phone up... cant get past the vibrant start screen, cant read the ext sd and the phone drivers will not work... computer detects it, but no drivers are installed. i have used the 32 bit driver 64 bit drivers, kies, kies mini, odin v1 and v1.7, still nothing... i can get into cwm recovery, but only with voodoo enabled, and can get into download mode, but i cant seem to get the computer to read it. have used 4 different computer, win 7 and 32 bit xp....also have tried drivers with pdanet and easy tether, but still no luck... can you offer any help to me??? thanks in advance.
as of u have done so much and nothing helped i would cry , and for not readin on how to unbrick your phone right on top of the forum you should cry too .
and if look good enough every 3rd thread that is made is how to unbrick the phone
@bartek
OK...OMG dude... you had like 5 posts 3 days ago...how are you helping this individual out other then giving him all your illegible ramblings that you are posting and ridiculing individuals as you go .. I'm sry, I don't mean to rant but damn...
Anyway OP, your just soft bricked. If you can get into d/l mode then I would either go ahead and ODIN back or if you can get into CWM recovery and you still have Nero 5 in your root, I would just reflash it and it should take care of it...enable voodoo when you flash Nero 5 ..you should be ok.
First off, I have been searching the forums for almost two weeks now and cannot find a solution....I have tried everything......the first problem is that no matter what drivers I use, the computer still says usb device not recognized, so I cannot get odin or heimdall to communicate, neither kies or kies mini.....
Well, now I turned it on this morning and I cannot get into cwm or dload mode.....just keeps bootlooping and linda talks and says riskful operation, then reboots......I am lost, don't know what else to do, I'm gonna throw this phone out the window
Sent from my HTC Vision using XDA App
bouzouki said:
First off, I have been searching the forums for almost two weeks now and cannot find a solution....I have tried everything......the first problem is that no matter what drivers I use, the computer still says usb device not recognized, so I cannot get odin or heimdall to communicate, neither kies or kies mini.....
Well, now I turned it on this morning and I cannot get into cwm or dload mode.....just keeps bootlooping and linda talks and says riskful operation, then reboots......I am lost, don't know what else to do, I'm gonna throw this phone out the window
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I would say Odin is your friend. go back to stock and start over Here is a start
http://www.youtube.com/watch?v=KyAIUOYufrU
Part 2: http://www.youtube.com/watch?v=33I-aNCypVM
hope this helps you
no dont throw the phoine out give it to mee ! or u can just remove your battery while phone is hooked up to computer with usb push volume up and volume down hold it put battery in , yellow android showed up ? u good to odin if he didnt redo repeat those steps until u will see him
how can i get odin to communicate when the computer wont read it?? it says usb device not recognized and no matter which drivers i install, it wont communicate.... and plus odin wont connect, i have tried multiple times.....heimdall drivers wont install either, it gives me a failed result.... i have used the 32 bit drivers, 64 bit drivers, kies, kies mini for vibrant, odin, heimdall, everything.... i have a g2 and have done so much to it with no problems, this phone has got me confused...
u need damn download mode for odin to see your phone damn could you just do those steps that i told you ? and btw open up odin so u can see when u phone is detected it will light up i nyellow
onc3 again
1. phone connected to computer
2.odin open
3.take out battery (out of your phone)
4.hold volume up volume down (allthe time)
5.put battery back in
6. put files in odin flash back
bouzouki said:
how can i get odin to communicate when the computer wont read it?? it says usb device not recognized and no matter which drivers i install, it wont communicate.... and plus odin wont connect, i have tried multiple times.....heimdall drivers wont install either, it gives me a failed result.... i have used the 32 bit drivers, 64 bit drivers, kies, kies mini for vibrant, odin, heimdall, everything.... i have a g2 and have done so much to it with no problems, this phone has got me confused...
Click to expand...
Click to collapse
I gotcha.... not to sound like an idiot but have you tried a different usb port? If your using one on the front, try ones in the back if your on a desktop.. if that doesnt work try running ODIN in XP SP3 compatibility mode
bartek25 said:
u need damn download mode for odin to see your phone damn could you just do those steps that i told you ? and btw open up odin so u can see when u phone is detected it will light up i nyellow
Click to expand...
Click to collapse
I think he's saying that odin doesn't detect his phone and therefore doesn't light up yellow. Happened to me too. I'm on the epic. I tried everything. But odin finally found my device. Try different usb ports, a different wire, reboot both phone and pc. Switch between usb debugging on and off. Try it with sideloading enabled and not. I eventually found a combimation that worked. These phones are fickle. It'll work eventually.
Sent from my SPH-D700 using XDA App
+1 on what he said above try connectin and disconection your phone lots of times 2 forgot it happend to me too once .sorry it was a while ago
i have used front usb ports, and the back ones, have even used 3 different computers. but same result. will odin connect even if the driver are not installed correctly and the computer doesnt recognize the usb device? and also, now i have the problem where i cannot get the phone into dload mode, it keep bootlooping to the samsung vibrant start screen and linda says riskful operation.
bouzouki said:
i have used front usb ports, and the back ones, have even used 3 different computers. but same result. will odin connect even if the driver are not installed correctly and the computer doesnt recognize the usb device? and also, now i have the problem where i cannot get the phone into dload mode, it keep bootlooping to the samsung vibrant start screen and linda says riskful operation.
Click to expand...
Click to collapse
As far as I know, ODIN wont recognize your phone without being in download mode and drivers installed on your computer.
bouzouki said:
i have used front usb ports, and the back ones, have even used 3 different computers. but same result. will odin connect even if the driver are not installed correctly and the computer doesnt recognize the usb device? and also, now i have the problem where i cannot get the phone into dload mode, it keep bootlooping to the samsung vibrant start screen and linda says riskful operation.
Click to expand...
Click to collapse
No I believe you need the correct drivers installed. At this point either your missing something or don't have the correct driver to install. Maybe someone can point out where all the proper drives are for you to download
speachless ....if u wont follow what i wrote im helpless.goodbye. and why u turning your phone on dude download mode is battery out phone connected to ANY usb port hold vol up vol down hold all time and puit battery in
if that doesent help your phones usb is **** or the cable is ****
btw, i have tried installing all the proper driver from the proper threads... 32 bit, 64 bit, ive tried kies and kies mini for vibrant, heimdall drivers also.... NOTHING WORKS...
i appreciate everones help... thank you.
This is what I do to get it working. I open odin first and load all the needed files.
I then plug the usb cord into the usb first before plugging it into the phone.
with odin open and the phone completely off. I hold down the volume rocker and plug in the usb. I get download mode to work almost everytime.
For me the stock cable I got with mine doesnt work. I have to use a different cord or it acts like it doesnt see my phone.
I've tried everything on this site to root and get cwm to install custom roms. I've done this with my inspire and infuse but the sgs2 is currently winning the battle.
I have the drivers installed and I know how to boot into download mode but for some reason odin will not work for me. I can't get the yellow bar to come up for me to install the pda file. I like the phone but not being able to flash roms is gonna suck.
If anyone could help that would be great. I've tried all the methods on here and no success. Thanks in advance.
Put your phone into download mode and connect to you computer, then go to to device management either through settings or by right clicking on my computer then properties.
There look through the USB devices on your computer, you should find this listed somewhere there
Code:
Samsung Mobile USB CDC Composit Device
If the driver is set up correctly.
If you can't find the above then uninstall any thing that is any kind of a Samsung mobile device, unplug your phone and uninstall and reinstall Samsung kies.
If you do find the above, unplug your phone, make sure the version of Odin you have is 1.82 or higher.
Then do the following in the exact order
1. Reboot your computer
2. Start Odin
3. Put your phone into download mode and connect to your computer - and hopefully within 10 to 15 seconds Odin should recognize your phone
Sent from my SAMSUNG-SGH-I777 using XDA App
ODIN Flash
cpbeats said:
I've tried everything on this site to root and get cwm to install custom roms. I've done this with my inspire and infuse but the sgs2 is currently winning the battle.
I have the drivers installed and I know how to boot into download mode but for some reason odin will not work for me. I can't get the yellow bar to come up for me to install the pda file. I like the phone but not being able to flash roms is gonna suck.
If anyone could help that would be great. I've tried all the methods on here and no success. Thanks in advance.
Click to expand...
Click to collapse
This should fix the problem:
Get the Samsung Unified USB driver here: http://api.viglink.com/api/click?for...13196871580881
Be sure to uninstall kies if it's installed and uninstall any other samsung usb driver.
Then reboot windows before installing the new unified samsung drivers.
After installation of the new usb drivers reboot windows before connecting the usb cable into the phone.
Plugging in the original samsung usb cable into a different usb port in the
back of the computer is also a good thing to try as Dungeon47 was saying.
Good Luck!
Make sure you are using a USB directly connected to your motherboard. Make sure you are using an official Samsung or Blackberry micro USB cable. If that doesn't help, try another port.
Ok thanks i'm still in the process of trying and doing what y'all suggested. I will let y'all know if it works.
Well I got superuser now but still unsuccessful in flashing rom.
Says installation aborted. Ill try later but thanks for helping out.
Did you try starting Odin first, and plugging your phone in afterwards? That hung me up for a little bit. (I'm assuming you reinstalled Kies as suggested).
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Yeah I got root but when I try to flash a rom I'm unsuccessful. Trial and error. Ill get it.
I am completely new to this so bear with me. I am trying to root my samsung fascinate. What are the steps i need to take to do so?
http://forum.xda-developers.com/showthread.php?t=1238070
Refer to section 5
http://bit.ly/uLiskn
Use guide by Droidstyle......nuff said
Sent from my SCH-I500 using XDA App
I have been able to do this on my wife's phone pretty easy and all I do it find a copy if CWM recovery (often called CWM all), a copy of update.zip, and the latest version if Odin. Use your factory USB cord and plug your phone into your PC. Let it install all the drivers. Once I stalled open your phone and mount the SD card so you can see it as a hard drive. Place the update.zip file on the SD card, but not in any folder. From there unhook your phone and power it down. Remove the battery and start Odin. Plug your USB part of the phone cord into the PC (don't connect it to the phone yet). Hold down the volume down button and power button while connecting the phone cord to the phone. You will see a yellow triangle and Droid on the screen. From there click the PDA button and find the CWM file you downloaded. Click start and let it do its thing. The phone will power down and you can then replace the battery and start your phone. I usually let my phone power up and then power it down again. After it is off you will then need to hold the volume up, volume down, and power button to boot into recovery. Once in Recovery you can choose the option to install update.zip. Let it do its thing and then reboot the phone. You should be good to go.
icemanwbs said:
Use guide by Droidstyle......nuff said
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Sent from my SCH-I500 using XDA App
zander78 said:
http://bit.ly/uLiskn
Click to expand...
Click to collapse
LMAO... you crack me up man.
millwood said:
I have been able to do this on my wife's phone pretty easy and all I do it find a copy if CWM recovery (often called CWM all), a copy of update.zip, and the latest version if Odin. Use your factory USB cord and plug your phone into your PC. Let it install all the drivers. Once I stalled open your phone and mount the SD card so you can see it as a hard drive. Place the update.zip file on the SD card, but not in any folder. From there unhook your phone and power it down. Remove the battery and start Odin. Plug your USB part of the phone cord into the PC (don't connect it to the phone yet). Hold down the volume down button and power button while connecting the phone cord to the phone. You will see a yellow triangle and Droid on the screen. From there click the PDA button and find the CWM file you downloaded. Click start and let it do its thing. The phone will power down and you can then replace the battery and start your phone. I usually let my phone power up and then power it down again. After it is off you will then need to hold the volume up, volume down, and power button to boot into recovery. Once in Recovery you can choose the option to install update.zip. Let it do its thing and then reboot the phone. You should be good to go.
Click to expand...
Click to collapse
Hi Guys-
I'm having a problem with my Samsung Fascinate as well. Its currently running Gingerbread 2.3.5 build EH03. I had my phone flashed to MetroPCS a couple of days ago with Talk/Text only. Now I'm trying to root my phone using Odin. I want to install CyanogenMod, because I ran it on my old HTC Hero and was satisfied with it.
The problem is that my phone will not mount as a USB Storage. I'm using a Mac, however I have Parallels running Windows XP SP3. I have installed the Samsung drivers from the Samsung website and the drivers do show up in the device manager, but it still doesn't mount as a USB storage device in Windows. On the phone I receive the notification that its USB Connected - select to copy files to/from your computer. But, again nothing happens when I select it.
Whenever I plug my phone in the USB port Odin recognizes it, but when I put the phone into download mode it doesn't show up in Odin. I've also tried to see if it shows up using ADB from the Android SDK. Its not listed as a device when I run the command adb devices.
Is there anyway to root the phone if its not showing up in Odin when its download mode?
stevebanks said:
Hi Guys-
I'm having a problem with my Samsung Fascinate as well. Its currently running Gingerbread 2.3.5 build EH03. I had my phone flashed to MetroPCS a couple of days ago with Talk/Text only. Now I'm trying to root my phone using Odin. I want to install CyanogenMod, because I ran it on my old HTC Hero and was satisfied with it.
The problem is that my phone will not mount as a USB Storage. I'm using a Mac, however I have Parallels running Windows XP SP3. I have installed the Samsung drivers from the Samsung website and the drivers do show up in the device manager, but it still doesn't mount as a USB storage device in Windows. On the phone I receive the notification that its USB Connected - select to copy files to/from your computer. But, again nothing happens when I select it.
Whenever I plug my phone in the USB port Odin recognizes it, but when I put the phone into download mode it doesn't show up in Odin. I've also tried to see if it shows up using ADB from the Android SDK. Its not listed as a device when I run the command adb devices.
Is there anyway to root the phone if its not showing up in Odin when its download mode?
Click to expand...
Click to collapse
no...you need odin to flash cwm recovery so you can three finger into that recovery to flash the superuser.zip
Try another Pc!
stevebanks said:
Hi Guys-
I'm having a problem with my Samsung Fascinate as well. Its currently running Gingerbread 2.3.5 build EH03. I had my phone flashed to MetroPCS a couple of days ago with Talk/Text only. Now I'm trying to root my phone using Odin. I want to install CyanogenMod, because I ran it on my old HTC Hero and was satisfied with it.
The problem is that my phone will not mount as a USB Storage. I'm using a Mac, however I have Parallels running Windows XP SP3. I have installed the Samsung drivers from the Samsung website and the drivers do show up in the device manager, but it still doesn't mount as a USB storage device in Windows. On the phone I receive the notification that its USB Connected - select to copy files to/from your computer. But, again nothing happens when I select it.
Whenever I plug my phone in the USB port Odin recognizes it, but when I put the phone into download mode it doesn't show up in Odin. I've also tried to see if it shows up using ADB from the Android SDK. Its not listed as a device when I run the command adb devices.
Is there anyway to root the phone if its not showing up in Odin when its download mode?
Click to expand...
Click to collapse
I think you can root the phone without having to flash CWM recovery, but it does require ADB so I don't know if that would be any help. FWIW, I have a mac too, and haven't had any luck using heimdall (it doesn't recognize the device), although I haven't tried any sort of VM or anything like crossover to use odin on it. I've just accepted using a windows machine when odin is required
Does your ADB work with other devices? For whatever reason, I couldn't get it working with the fascinate, then I tried it a few days ago and it worked all of a sudden. Another workaround is to use the wirelessADB app from the market. If you search for "galaxy s mac" you'll see that you're unfortunately definitely not alone in having connectivity issues with OSX.
k_nivesout said:
I think you can root the phone without having to flash CWM recovery, but it does require ADB so I don't know if that would be any help. FWIW, I have a mac too, and haven't had any luck using heimdall (it doesn't recognize the device), although I haven't tried any sort of VM or anything like crossover to use odin on it. I've just accepted using a windows machine when odin is required
Does your ADB work with other devices? For whatever reason, I couldn't get it working with the fascinate, then I tried it a few days ago and it worked all of a sudden. Another workaround is to use the wirelessADB app from the market. If you search for "galaxy s mac" you'll see that you're unfortunately definitely not alone in having connectivity issues with OSX.
Click to expand...
Click to collapse
very true...ADB is another option to root, but I never recomend it because most folks will have trouble using it....dont mean the in a condescending way, just sayin.
For sure, just thought I would throw it out there. Looks fairly simple actually from the guide nitsuj17 posted in the OP of the EH03 odin/heimdall package, well maybe straightforward would be a better word, just since it's laid out step-by-step.
I actually had problems using cwm... it failed to flash the su.zip properly. So I used the latest version of GeeWiz recovery on stock EH03. Worked fine. Roots every time. #hopethathelps
Sent from my SCH-I500 using xda premium
There is a thread with a stock root with voodoo lag fix and ROM manager. Step by step instructions as well.
Sent from my SGH-T959P using xda premium
cant install roms
Hi, guys new to rooting and custom roms but ive hit a snag.
I have acheived root by using section 5 here (http://forum.xda-developers.com/showthread.php?t=1238070)
but i cannot install any roms all i get when i select the zip file is a screen that shows the unpacking then it goes to a triangle with an exclamation point. then reboots into normal android loosing everything i had installed. i made a backup using rom manager but it has dissapeared so now i have nothing to lose. can anyoone help.
all i want to be able to do is put ics with very few apps and overclock my cpu
Any help would be great
Samsung fascinate running android2.3.5 with superuser
thx
1. You don't need to be root first before flashing roms.
2. It sounds like you're possibly booting into the stock recovery.
If you want to flash ICS, just follow the steps in that section 3 of the guide you've already been using.
I tried but it failed on step 9/10
So you're saying that it fails after you press start in odin (flashing the stock EH03 package)? What error are you getting and when exactly is it happening?
If you're not on any rom and just on stock EH03, I'd think you should be able to just odin the CWM recovery and install ICS from there.
not sure what the exact message was but yes after i hit start it initalized did nothing for about 3 minutes of the five and got a fail message
And you're sure you're using the correct files and selecting the right things in odin? Make sure the stock EH03 rom is in the PDA section, the atlas 2.2 file for PIT, and repartition is checked. Could possibly be a bad download too, I'd maybe try redownloading the files and trying again. Also, are you using Odin 1.3 that was linked in the guide?
Alternatively, you could just try flashing the CWM4 fixed for CM7 in odin, then three-finger into recovery and flash ICS from there.
Oh and just making sure you're getting into download mode the right way, I personally pull the battery, that way it doesn't reboot after you flash whatever it is you're flashing. If none of that works, I'd try a different USB port/cable. Is odin recognizing the device properly?
I don't have any USB device connected other than the mouse on PC. i have even tried on my laptop with no mouse.
I have downloaded pit file and uvjfd.tar two times from the forums.
I have tried flashing multiple times from both my PC & laptop using Odin 3.0 v1.0, v1.85, v3.07(latest), EZOdin v1.70 and installed Samsung USB drivers multiple times, even downloaded latest driver version from official Samsung Vibrant page.
I have tried flashing from all possible USB ports on my PC & laptop wherever the phone was being recognized. But now with the latest official Samsung Vibrant drivers, my phone is not being detected by any USB port on my PC.
But whenever I have flashed, Odin is stuck at Cache or Modem or recently(with latest samsung drivers), DO NOT TURN OFF TARGET !!
I have even tried flashing through Heimdall 1.3.1 but the zadig.exe shows the device only as 'Gadget Serial' no matter how many times I try, and installs the driver with device as Gadget Serial under libusb in Device Manager and I also tried by updating driver as Samsung Composite USB as mentioned in readme. Either Way Heimdall frontend will not flash and says "Failed to detect compatible download-mode device".
Edit: I tried with another USB cable, of LG GS500v, and Oh Lord Jesus, Odin flashed past it. Great, time to buy a new Samsung USB cable, now!
PROBLEM SOLVED
parasharenator said:
I don't have any USB device connected other than the mouse on PC. i have even tried on my laptop with no mouse.
I have downloaded pit file and uvjfd.tar two times from the forums.
I have tried flashing multiple times from both my PC & laptop using Odin 3.0 v1.0, v1.85, v3.07(latest), EZOdin v1.70 and installed Samsung USB drivers multiple times, even downloaded latest driver version from official Samsung Vibrant page.
I have tried flashing from all possible USB ports on my PC & laptop wherever the phone was being recognized. But now with the latest official Samsung Vibrant drivers, my phone is not being detected by any USB port on my PC.
But whenever I have flashed, Odin is stuck at Cache or Modem or recently(with latest samsung drivers), DO NOT TURN OFF TARGET !!
I have even tried flashing through Heimdall 1.3.1 but the zadig.exe shows the device only as 'Gadget Serial' no matter how many times I try, and installs the driver with device as Gadget Serial under libusb in Device Manager and I also tried by updating driver as Samsung Composite USB as mentioned in readme. Either Way Heimdall frontend will not flash and says "Failed to detect compatible download-mode device".
Edit: I tried with another USB cable, of LG GS500v, and Oh Lord Jesus, Odin flashed past it. Great, time to buy a new Samsung USB cable, now!
PROBLEM SOLVED
Click to expand...
Click to collapse
Dont worry....this time go to download mode and flash eugenes that does not brick aka Eugene_2E_JK2_Froyo with the same pit file and ur good to go brother
Similar Problem but different results.
Hi!
Whomever can help me, please help me. Right now, I am on stock Froyo 2.2 after the factory reset so this is how I got it but it is rooted only. I am trying to overwrite CWM because I cannot get into its recovery no matter how many times I flash it. Odin just will not recognize my phone when I am in download mode. When my phone is on, it will allow the mass storage and that works but when in download mode, my PC says unrecognized devide. I have a feeling that is the problem and I have updated the drivers several times, especially from Samsung but to no avail. Does someone have a solution to this problem? I want to go to Avatar ROM with my phone which is Jelly Bean and have seen its possible but I feel CWM is holding me back.
Thank you in advance!
David Carlton
david.carlton.jr38 said:
Hi!
Whomever can help me, please help me. Right now, I am on stock Froyo 2.2 after the factory reset so this is how I got it but it is rooted only. I am trying to overwrite CWM because I cannot get into its recovery no matter how many times I flash it. Odin just will not recognize my phone when I am in download mode. When my phone is on, it will allow the mass storage and that works but when in download mode, my PC says unrecognized devide. I have a feeling that is the problem and I have updated the drivers several times, especially from Samsung but to no avail. Does someone have a solution to this problem? I want to go to Avatar ROM with my phone which is Jelly Bean and have seen its possible but I feel CWM is holding me back.
Thank you in advance!
David Carlton
Click to expand...
Click to collapse
Can you explain the steps your taking when you try to get into odin
Sent from my SGH-T959 using xda app-developers app
The steps I take is put the phone into download mode by pulling the battery and then holding both the volume up and down then reinsert the battery. It shows the download screen. I then start odin and I have tried version 1.7 and the latest version of 3.0.7. Then I plug my phone into the USB port and windows pops up saying unrecognized device. I have reinstalled drivers several times. Now to describe my desktop is that it is a pentium III 550 Mhz...and old computer and running Windows XP Professional. I am able to do the mass storage when the phone is on normally so it recognizes it that way though. I have tried different USB ports on it as well so just unsure. I have rooted the phone and have superuser app access. ROM manager was supposed to have flashed the recovery mode but it never goes into the CWR mode either and its version is 2.5.1.2 which I have seen work on these phones in videos on YouTube so guess I am trying a different route so I can play with the mods to find a ROM I like. I was going to try the Avatar ROM for the vibrant but just cannot seem to get to the point where I can get the ROM flashed. Any help would be greatly appreciated.
Keep the battery in and lull up Odin. Cut off the phone and hold both volumes while inserting USB hopefully the computer will then recognize it
Sent from my GT-I9000 using xda app-developers app
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Click to expand...
Click to collapse
Stay away from kies I will Brick your device as for the computer being old I don't know. I've never had this problem before. Sorry o couldn't help
Sent from my GT-I9000 using xda app-developers app
david.carlton.jr38 said:
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Click to expand...
Click to collapse
USB cable does make difference. And USB ports even on the same computer. Check also your phone's drivers. Finally, try out Heimdall one-click package for t959, it is more powerful and sensitive than Odin.
Good luck
ioancr said:
USB cable does make difference. And USB ports even on the same computer. Check also your phone's drivers. Finally, try out Heimdall one-click package for t959, it is more powerful and sensitive than Odin.
Good luck
Click to expand...
Click to collapse
Do you have the link to the Heimdall one-click package or do I just google it?
david.carlton.jr38 said:
Do you have the link to the Heimdall one-click package or do I just google it?
Click to expand...
Click to collapse
I found the link:
http://d-h.st/M93
on the Repository thread: http://forum.xda-developers.com/showthread.php?t=1875966
And since only thing remaining in your case is USB cable, I would say try with a different micro USB cable, even a different vendor's will do, as it did the trick for me( see the edit in OP)
I will try that. Thank you! I need to get a car charger anyway so I can get a usb adapter for the car and a usb cable and try it that way.
Sent from my SGH-T959 using xda app-developers app
david.carlton.jr38 said:
I will try that. Thank you! I need to get a car charger anyway so I can get a usb adapter for the car and a usb cable and try it that way.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
For now, you can try any micro usb cable that fits, they all have same specifications.
Okay. Thanks!
Sent from my SGH-T959 using xda app-developers app
Stuck on cache
I'm also stuck on cache & I have tried more than one USB cable. Is there something else that I might be doing wrong? I'm completely uninclined technologically. The fact that I got my phone into download mode after 'bricking' is a feat in itself. Now what do I do when I'm stuck??
Mentalmama said:
I'm also stuck on cache & I have tried more than one USB cable. Is there something else that I might be doing wrong? I'm completely uninclined technologically. The fact that I got my phone into download mode after 'bricking' is a feat in itself. Now what do I do when I'm stuck??
Click to expand...
Click to collapse
Great that you could get it to the download mode.
Follow these steps:
1. Make sure that you have the correct drivers installed for your Operating System. Preferably, download the latest drivers. You can verify when your device is recognized when connected in download mode.
2. Make sure you follow this thread for Odin flashing http://forum.xda-developers.com/showthread.php?t=849028
3. If unable to flash using ODIN successfully, try with different USB ports, on same computer or a different one, say, a laptop.
4. If still unable to do so, try with different USB cables (any micro-usb should do).
In this way, you should by trying multiple alternatives at each step you should be able to eliminate the options and figure out what is really creating the problem in your flashing. Trust me my friend, this has not go anything to do with technology. just follow the steps, try alternatives and you would resolve this. Do post back on thread, if you have any queries.