Hey everybody,
i have a kernel file boot.img
how can i flash it?
How can i make a CWM file?
How can i make a .tar file?
Can u not download a kernel to flash
Sent from my GT-I9100 using xda premium
No because i got the boot.img from the cm9 rom
Gesendet von meinem GT-I9100 mit Tapatalk 2
pandalow said:
No because i got the boot.img from the cm9 rom
Gesendet von meinem GT-I9100 mit Tapatalk 2
Click to expand...
Click to collapse
Try a new kernel can u get into recovery
Sent from my GT-I9100 using xda premium
Yes all is ok. But how can i flash a boot.img0
Gesendet von meinem GT-I9100 mit Tapatalk 2
pandalow said:
Yes all is ok. But how can i flash a boot.img0
Gesendet von meinem GT-I9100 mit Tapatalk 2
Click to expand...
Click to collapse
go into recovery and mount usb storage and put this to your phone and flash though recovery http://forum.xda-developers.com/showthread.php?t=1617219
You're not supposed to unpack .zip files for Cwm. Leave as it is (download again and leave it as zip) and flash with Recovery.
Sent from my Galaxy S2 GT i9100
OH MY GOD! Why you don't understand me? I have a boot.img Kernel from a ROM! and i want to flash it to a other rom? How can i flash boot.img?
dd if=boot.img of=/dev/block/mmcblk0p5
terminal emulator?
heimdall flash --kernel boot.img
Through ADB install the kernel. Alternatively, to flash the "boot.img" and you can use the program FASTBOOTGUI-beta2 download here ; http://www.mediafire.com/?wq5yxg58mq79kij , is much more practical and fast, without using the Windows command prompt with ADB ...
allyourbase said:
heimdall flash --kernel boot.img
Click to expand...
Click to collapse
Heimdall works with i9100?
Sent from my Galaxy S2 GT i9100
Heimdall is compatible with i9100 ..
devid801 said:
Heimdall is compatible with i9100 ..
Click to expand...
Click to collapse
This.
How can i make a CWM file?
How can i make a .tar file?
i was trying to get custom roms, but after i install the rom from cwm and reboot , i only get the yellow triangle and it never loaded , so i had to flash it again with the soriginal frimware from sammobile.com. everytime i try i get the same thing. i dont know where is the problem so i was hoping to get some help here .. and excuse my english
Phone: Samsung Galaxy S II I9100G
Android Version : 2.3.6
Baseband vesion: I9100GXXKL4
Kernel Version : 2.6.35.7 [email protected] #2
Build number: GINGERBREAD.JPLC1
If you can enter download mode you have to try flash the phone by old stock rom gingerbread in 3 files version. If it doesnt work you have to use jitag than flash by 3 files rom. By odin ofcourse. Jitag fix triangle.
Wysłane z mojego GT-I9100 za pomocą Tapatalk
supi9 said:
If you can enter download mode you have to try flash the phone by old stock rom gingerbread in 3 files version. If it doesnt work you have to use jitag than flash by 3 files rom. By odin ofcourse. Jitag fix triangle.
Wysłane z mojego GT-I9100 za pomocą Tapatalk
Click to expand...
Click to collapse
thank you for responding, i dont know the 3 files version and jitag can u give me a link to a thread about this or something ?? thank u..
Since you have the G version, follow the guide
http://forum.xda-developers.com/showthread.php?t=1619571
And ensure you flash a custom ROM specific to G version and not I9100 International version.
Sent from my GT-I9100 using Tapatalk 2
acekay said:
Since you have the G version, follow the guide
http://forum.xda-developers.com/showthread.php?t=1619571
And ensure you flash a custom ROM specific to G version and not I9100 International version.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
thanks i'll try this guide
i have another question, before i flash the ROM i want, i should flash a kernel first , right ?? which kernel i should use ??
Chico7kl said:
i have another question, before i flash the ROM i want, i should flash a kernel first , right ?? which kernel i should use ??
Click to expand...
Click to collapse
Check this thread
http://forum.xda-developers.com/showthread.php?t=1588737
It is repository of all kernels and roms for i9100g
You can try different kernels and ROMs and stick to what suits your needs.
Sent from my GT-I9100 using Tapatalk 2
Chico7kl said:
thank you for responding, i dont know the 3 files version and jitag can u give me a link to a thread about this or something ?? thank u..
Click to expand...
Click to collapse
I thought about the plug jtag. I did not notice your phone I9100G sorry.
Wysłane z mojego GT-I9100 za pomocą Tapatalk
i tiried everything its not working !! i tried to flash remix resurrection and cMiUi and after i install the rom and reboot it gives me the yellow triangle and never loaded !! :crying:
Have you done a factory reset before flashing custom ROM?
przemcio510 said:
Have you done a factory reset before flashing custom ROM?
Click to expand...
Click to collapse
yes i did , i followed the instruction in every thread about these roms. still the same thing happens
Chico7kl said:
yes i did , i followed the instruction in every thread about these roms. still the same thing happens
Click to expand...
Click to collapse
Can you please confirm if you followed the guide I posted in my first post to resolve the soft brick issue? Before you flash any custom ROM, make sure that you have a working stock 4.0.3 ROM. From the symptoms it seems the kernel is not loading as it should. So first follow that guide to flash a stock ROM.
Once the stock is up and running, you can flash custom ROM and/or kernel.
Sent from my GT-I9100 using Tapatalk 2
acekay said:
Can you please confirm if you followed the guide I posted in my first post to resolve the soft brick issue? Before you flash any custom ROM, make sure that you have a working stock 4.0.3 ROM. From the symptoms it seems the kernel is not loading as it should. So first follow that guide to flash a stock ROM.
Once the stock is up and running, you can flash custom ROM and/or kernel.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
i did folow the guide u posted earlier but i flashed a stock 2.3.6 rom, does it matter ?
Chico7kl said:
i did folow the guide u posted earlier but i flashed a stock 2.3.6 rom, does it matter ?
Click to expand...
Click to collapse
Nope 2.3.6 should be fine as long as it loads properly and not gets stuck on the yellow triangle.
So next step would be to flash CWM recovery. You will get the detailed steps from second link under custom kernels. Flash it from odin. Once done take a backup from custom recovery and flash any GB or ICS rom from the recovery.
Sent from my GT-I9100 using Tapatalk 2
acekay said:
Nope 2.3.6 should be fine as long as it loads properly and not gets stuck on the yellow triangle.
So next step would be to flash CWM recovery. You will get the detailed steps from second link under custom kernels. Flash it from odin. Once done take a backup from custom recovery and flash any GB or ICS rom from the recovery.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Okk when i flashed the ClockworkMod Recovery 5 from odin , i got stuck with the yellow triangle. i think the problem is in the CWM recovery flashing ! but i can take off the battery and put it on again to go ONLY to the download mode or recovery mode.
i had to re-flash a stock kernel i found on the same thread
The steps on the CWMR 5 thread should not cause any issues.
Just to confirm:
- You are using GB kernel with filename as GT-I9100G_GB_ClockworkMod-Recovery_5.0.2.8.tar
- In odin keep all as default. Do not select partition.
- The kernel tar file is selected in pda.
- No other file is selected in any of other sections.
Sent from my GT-I9100 using Tapatalk 2
Chico7kl said:
i tiried everything its not working !! i tried to flash remix resurrection and cMiUi and after i install the rom and reboot it gives me the yellow triangle and never loaded !! :crying:
Click to expand...
Click to collapse
Flash any ICS stock fw by Odin 3 v.1.85, make sure one package ticked - use rahmat3 cwm root method to root... (at s2 original development). Maximize ur search button..
Sent from my GT-I9100 using xda app-developers app
yes thats exactly what i have done
acekay said:
The steps on the CWMR 5 thread should not cause any issues.
Just to confirm:
- You are using GB kernel with filename as GT-I9100G_GB_ClockworkMod-Recovery_5.0.2.8.tar
- In odin keep all as default. Do not select partition.
- The kernel tar file is selected in pda.
- No other file is selected in any of other sections.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
yes thats exactly what i have done
One thing is kinda strange, my device status is "normal", and i can search and receive OTA updates, although i am using CWM Recovery. In Download mode, the counter shows three, and status is modified. I didnt use triangle away.
Stock 4.1.2 XXELL4 DBT with XXELLA Bootloader.
Weird..
Gesendet von meinem GT-I9300 mit Tapatalk 2
Anyone?
Gesendet von meinem GT-I9300 mit Tapatalk 2
Hello
Can someone please me what to do before flashing the new bootloader and new lla rom and to stay completly stock with a 0 flash counter ?
Is triangle away still working ?
Note : im using exynos abuse right now and i do like to keep it after i install the new firmware with the bootloader ..
Can someone please direct me ?
Sent from my GT-I9300 using xda premium
flash le8
then tringle away
Le8 ??
Sent from my GT-I9300 using xda premium
Firmware... Last 3 letters are LE8
Gesendet von meinem GT-I9300 mit Tapatalk 2
I've using cm 10.1 for a few day.but its doesnt support exfat.so i try Siyah kernel.but i found that battery drain.anyone get this problem???
I flash cm 10.1 first and using for a week then flash Siyah kernel.is this right??or i must flash the Siyah kernel first???
Srrry for my bad english
Sent from my GT-I9300 using xda premium
fantasylovevn said:
I've using cm 10.1 for a few day.but its doesnt support exfat.so i try Siyah kernel.but i found that battery drain.anyone get this problem???
I flash cm 10.1 first and using for a week then flash Siyah kernel.is this right??or i must flash the Siyah kernel first???
Srrry for my bad english
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It's right.
First System (CM),
then kernel.
But when you have drain, try to do a factory reset.
If it still drains, try other kernels, like temasek or Yank555.
But they're all not supporting exFat.
Greetz
Gesendet von meinem GT-I9300 mit Tapatalk 2