Rezound reboots constantly after minute from start like here youtube.com/watch?v=K0S1yx6mOZk[/url] i tryed to switch to CDMA + LTE/EvDO Auto and set it, but still have boot loops! Phone beeing hot when boot loop.
OFFFFFFFFFFFFFFF said:
Rezound reboots constantly after minute from start like here youtube.com/watch?v=K0S1yx6mOZk[/url] i tryed to switch to CDMA + LTE/EvDO Auto and set it, but still have boot loops! Phone beeing hot when boot loop.
Click to expand...
Click to collapse
what rom and firmware are you running?
chris182818 said:
what rom and firmware are you running?
Click to expand...
Click to collapse
I buy it on ebay, it was already boot looped, then im install some kind of PH98IMG.zip throught HBOOT, wipe all and then it boot looping again... Can u send me link to good ROM and instructions?
OFFFFFFFFFFFFFFF said:
I buy it on ebay, it was already boot looped, then im install some kind of PH98IMG.zip throught HBOOT, wipe all and then it boot looping again... Can u send me link to good ROM and instructions?
Click to expand...
Click to collapse
boot into bootloader and tell us if you are
locked or unlocked
s-off / s-on?
Hboot: ?
Radio: ?
This will help us recommend something
topgun1953 said:
boot into bootloader and tell us if you are
locked or unlocked
s-off / s-on?
Hboot: ?
Radio: ?
This will help us recommend something
Click to expand...
Click to collapse
RELOCKED throught HTC dev
S-ON
HBOOT-2.25.0000
Radio-1.22.10.0421r/1.22.10.0424r
OpenDSP-v13.6.0.7611.00.0104
eMMC-boot
OFFFFFFFFFFFFFFF said:
RELOCKED throught HTC dev
S-ON
HBOOT-2.25.0000
Radio-1.22.10.0421r/1.22.10.0424r
OpenDSP-v13.6.0.7611.00.0104
eMMC-boot
Click to expand...
Click to collapse
Ok...you have latest ICS firmware. Can you boot into recovery?
topgun1953 said:
Ok...you have latest ICS firmware. Can you boot into recovery?
Click to expand...
Click to collapse
Yes i can, no reboots in the recovery, can install RUU
Does it reboot with the sim card removed?
Sent from the Rez
tjarvis said:
Does it reboot with the sim card removed?
Sent from the Rez
Click to expand...
Click to collapse
yes its reboot with sim card or not, reboots with back cover off or on...
OFFFFFFFFFFFFFFF said:
Yes i can, no reboots in the recovery, can install RUU
Click to expand...
Click to collapse
Things to try....1. factory reset in the bootloader
2. Download the latest leak from the post #3 here, http://forum.xda-developers.com/showthread.php?t=1757357 rename to ph98img.zip, boot into hboot and let it install. It it will take a while as you'll see there are many items to install.
That better give you a working phone
After, rename/remove the ph98img file from your sd card.
topgun1953 said:
Things to try....1. factory reset in the bootloader
2. Download the latest leak from the post #3 here, http://forum.xda-developers.com/showthread.php?t=1757357 rename to ph98img.zip, boot into hboot and let it install. It it will take a while as you'll see there are many items to install.
That better give you a working phone
After, rename/remove the ph98img file from your sd card.
Click to expand...
Click to collapse
Reebots again...
OFFFFFFFFFFFFFFF said:
Reebots again...
Click to expand...
Click to collapse
Old firmware patch, or new firmware patch
Depends on your firmware and Rom
ICS only works with ICS firmware or you get reboots, same with gingerbread
Sent from my ADR6425LVW using Tapatalk 2
Sounds like it might be firmware issues...s-off that thing and manually install all the required stuff. I think nils has links for everything you need in his thread for his business sense 3.6 rom. Good luck
Sent from the Rez
tjarvis said:
Sounds like it might be firmware issues...s-off that thing and manually install all the required stuff. I think nils has links for everything you need in his thread for his business sense 3.6 rom. Good luck
Sent from the Rez
Click to expand...
Click to collapse
How i can do if this require root and usb debaging enabled? i cant do this because phone only turn for 1 minute and rebots. And pls what mean NEW firmware patch?
OFFFFFFFFFFFFFFF said:
How i can do if this require root and usb debaging enabled? i cant do this because phone only turn for 1 minute and rebots. And pls what mean NEW firmware patch?
Click to expand...
Click to collapse
If you followed the directions for installing the latest leak as in post#10 and it flashed correctly your phone should work. I don't know what else the problem could be.
YOu put the .zip on your SD card....took out battery...put back in...held vol down and power to boot into bootloader....it found the ph98img.zip (RUU)....took a long time to flash....all items showed 'ok' .....then booted up.....if it bootloops still...I'm puzzled..because this should give you 'stock' ICS (as closed to stock as we think it will be when the OTA comes out)
could try again. The NEW firmware patch is used if you are on ICS firmware and you try to run a GB rom.
topgun1953 said:
If you followed the directions for installing the latest leak as in post#10 and it flashed correctly your phone should work. I don't know what else the problem could be.
YOu put the .zip on your SD card....took out battery...put back in...held vol down and power to boot into bootloader....it found the ph98img.zip (RUU)....took a long time to flash....all items showed 'ok' .....then booted up.....if it bootloops still...I'm puzzled..because this should give you 'stock' ICS (as closed to stock as we think it will be when the OTA comes out)
could try again. The NEW firmware patch is used if you are on ICS firmware and you try to run a GB rom.
Click to expand...
Click to collapse
Try this exactly this steps 5 times or maybe more - still bootlooping... hate it. Where i can buy motherboard for this phone? maybe someone sell?
OFFFFFFFFFFFFFFF said:
Try this exactly this steps 5 times or maybe more - still bootlooping... hate it. Where i can buy motherboard for this phone? maybe someone sell?
Click to expand...
Click to collapse
'
Wow..I'm out of ideas... ebay? HTC? :crying:
Maybe try going 'all the way back' to stock by flashing one of the official OTA RUU's found in one of the sticky roll up threads. Oh, you can't do that because you are s-on.. Sorry, you'd have to do the s-off if you want to flash the older RUU....what have you got to lose at this point.
Related
PG86IMG_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101-signed
http://d-h.st/AVU
hboot 1.58
PG86IMG_Shooter_S_Sprint_WWE_2.17.651.5_Radio_1.06 .00.1216_NV_NV_spcs_1.42_release_233304-signed.zip
http://dev-host.org/jqp5rpess1ic
hboot 1.50
PG86IMG_Shooter_S_Sprint_WWE_2.08.651.3_Radio_0.97.10.0808_NV_SPCS_1.31_003_release_219445-signed
http://dev-host.org/8agfa005a671
hboot 1.50
PG86IMG_Shooter_S_Sprint_WWE_2.08.651.2_Radio_0.97.10.0808_NV_SPCS_1.31_003_release_208230-signed
http://d-h.st/Vlf2
hboot 1.50
PG86IMG_Shooter_S_Sprint_WWE_1.13.651.7_Radio_0.97.10.0530_NV_NV_SPCS_1.16_release_198109-signed
http://dev-host.org/c1purqm3amox
hboot 1.40
PG86IMG_Shooter_Sprint_WWE_1.11.651.2_Radio_radio_0.97.00.0518_NV_SPCS_1.15_release_193503_signed
http://dev-host.org/3zhc8tgto66j
hboot 1.30
These images are very useful especially for people, who have HBOOT 1.5 that want to lock their bootloader and go back to Stock in order to get latest OTA upgrade.
Your contribution is much appreciated.
alammori said:
These images are very useful especially for people, who have HBOOT 1.5 that want to lock their bootloader and go back to Stock in order to get latest OTA upgrade.
Your contribution is much appreciated.
Click to expand...
Click to collapse
That's a good point! I'm on hboot 1.5. So I would have to unroot, update to new OTA, then HTC unlock again? I'm just trying to understand. I'm gonna try this route, if I can unlock/root my phone again.
sent from America....F__k yeah!
Jabawockee said:
That's a good point! I'm on hboot 1.5. So I would have to unroot, update to new OTA, then HTC unlock again? I'm just trying to understand. I'm gonna try this route, if I can unlock/root my phone again.
Click to expand...
Click to collapse
Yes, this is the route to go. I myself have an evo3d with hboot1.5. my phone was unlocked prior the OTA update. I tried everything to get that OTA installed but no chance. The reason is that the radio within the OTA wont install because you are still S-On even though you are unlocked .
So I had to
1. Run:
adb reboot bootloader
Click to expand...
Click to collapse
then:
fastboot oem lock
Click to expand...
Click to collapse
to lock my phone.
2. Download PG86IMG_Shooter_S_Sprint_WWE_2.08.651.3_Radio_0.97.10.0808_NV_SPCS_1.31_003_release_219445-signed.zip from the OP
3. Copy this image to my SDcard and rename to: PG86IMG.zip
4. Run:
adb reboot bootloader
Click to expand...
Click to collapse
and install this image from there.
5. Reboot into system and update the HTC sofware from there.
6. Copy my the file "Unlock_code.bin" (This is the file, that HTC sent me at the time I unlocked my phone) to the same folder where adb and fastboot are located.
7. Run again:
adb reboot bootloader
Click to expand...
Click to collapse
then
fastboot flash unlocktoken Unlock_code.bin
Click to expand...
Click to collapse
Congratulation, you are back in business with the latest update. It worked for me and should work for you.
Edit: You have to reinstall the TWRP, to install custom roms.
alammori said:
...
3. Copy this image to my SDcard and rename to: PG86IMG.zip
4. Run: and install this image from there.
5. Reboot into system and update the HTC sofware from there.
6. Copy my the file "Unlock_code.bin" (This is the file, that HTC sent me at the time I unlocked my phone) to the same folder where adb and fastboot are located.
7. Run again: then
Congratulation, you are back in business with the latest update. It worked for me and should work for you.
Edit: You have to reinstall the TWRP, to install custom roms.
Click to expand...
Click to collapse
I got to Step 5 and am now STUCK.
It goes in and says it is loading, then checking the PG86.IMG.ZIP file, then nothing..
It goes back to FASTBOOT, RECOVERY, FACTORY RESET, (which I've tried, to no avail), SIMLOCK, and IMAGE CRC.
If I reboot without holding down any keys, it goes back there again.
It says RELOCKED at the top. It also says I'm still S-ON. I don't know how to get back to standard factory E3D.
HELP!
KnoxBNYC said:
I got to Step 5 and am now STUCK.
It goes in and says it is loading, then checking the PG86.IMG.ZIP file, then nothing..
It goes back to FASTBOOT, RECOVERY, FACTORY RESET, (which I've tried, to no avail), SIMLOCK, and IMAGE CRC.
If I reboot without holding down any keys, it goes back there again.
It says RELOCKED at the top. It also says I'm still S-ON. I don't know how to get back to standard factory E3D.
HELP!
Click to expand...
Click to collapse
it should be "PG86IMG.zip
it will say relocked not locked
Mr.Esp said:
it should be "PG86IMG.zip
it will say relocked not locked
Click to expand...
Click to collapse
#noobQ
Do these contain hboot? What version? Thanks. These are ass savers is you bork hard
il Duce said:
#noobQ
Do these contain hboot? What version? Thanks. These are ass savers is you bork hard
Click to expand...
Click to collapse
yes sir they contain hboot ill add versions to OP
Going to try this on mine today to get back to stock....hboot 1.50 the directions above are right on track
Hmmmm, possibly role back to hboot 1.40?? That might come in handy instead of loading ROMs via fastboot all the time, I like to switch on the fly, and I can't really do that with having to break out my laptop and run through cmd...
Any chance I could get someone to upload this to mega uploads for me? My work network blocks the site listed above. Just the full Rom if you could please.
Hmm getting wrong PG86IMG... re-downloading from OP
JJsax said:
Hmmmm, possibly role back to hboot 1.40?? That might come in handy instead of loading ROMs via fastboot all the time, I like to switch on the fly, and I can't really do that with having to break out my laptop and run through cmd...
Click to expand...
Click to collapse
As far as I know you cannot roll back hboot.
So far no you cannot roll back H-boot. But you can still flash on the fly. I use Flash Img GUI from the market to flash the kernel for the Rom, then I boot to recovery and flash the Rom. Works just fine for me even when switching from ASOP to Sense.
You can roll back hboot if you have s off
Sent from my PG86100 using xda premium
For people having trouble with image in the OP, download this:
http://goo-inside.me/shooter/ruu/2.08.651.2
once you have booted to the system, you have to run the htc update twice, one time to upgrade to 2.08.651.3 and the second time to upgrade to 2.08.651.5.
alammori said:
For people having trouble with image in the OP, download this:
http://goo-inside.me/shooter/ruu/2.08.651.2
once you have booted to the system, you have to run the htc update twice, one time to upgrade to 2.08.651.3 and the second time to upgrade to 2.08.651.5.
Click to expand...
Click to collapse
Awesome, thank you so much. Thought I was going to have to wait until I got home from work to tackle this.
Thanks again!
KnoxBNYC said:
I got to Step 5 and am now STUCK.
It goes in and says it is loading, then checking the PG86.IMG.ZIP file, then nothing..
It goes back to FASTBOOT, RECOVERY, FACTORY RESET, (which I've tried, to no avail), SIMLOCK, and IMAGE CRC.
If I reboot without holding down any keys, it goes back there again.
It says RELOCKED at the top. It also says I'm still S-ON. I don't know how to get back to standard factory E3D.
HELP!
Click to expand...
Click to collapse
You are not bricked yet. The problem is PG86.IMG.ZIP. This is not how it suppose to be renamed. It should say PG86IMG.zip and not PG86.IMG.ZIP
If the downloaded zip from the OP does not work, download the file from the post #16 and you should be good to go.
That PG86IMG Alammori provided works for anyone who was unsuccessful with the ones in the OP.
Back to stock and I'm almost done. Time to root again and get back on with the rooted good life lol
Thanks was sent and thanks again
steve97ta said:
That PG86IMG Alammori provided works for anyone who was unsuccessful with the ones in the OP.
Back to stock and I'm almost done. Time to root again and get back on with the rooted good life lol
Thanks was sent and thanks again
Click to expand...
Click to collapse
I am glad, it is working for you. I love to see success stories.
I was wondering if someone could help me or point me in the right direction. I'm currently locked, rooted, s-off, GB firmware and radios (hboot 2.11) and running cleanrom 4.4 . I would like to have ICS firmware and radios. Reason for this is being on the ICS rom mixed with GB firmware & radios seem to cause alot of heat and fast battery loss. So what would be the best way to accomplish this? Any and all help is greatly appreciated.
Run the ruu if the firmware you like but be warned the heating probably won't go away
Btw look for the thread called "even newer leak 5/7/12"
Sent from my ADR6425LVW using XDA
So will that change the hboot? Also will it affect my S-Off?
it will install a new hboot and all... it won't affect s-off ever.
hboot-2.25.0000
radio-1.22.10.0421r/1.22.10.0424r
openDSP-v13.6.0.7611.00.0104
you'll have to re-install amonRA as well, but it all works great. join us on irc if you need more help.
i don't know what he's talking about with the heat, works great if you install everything kernels/radios..et al.
Go to this thread:
http://forum.xda-developers.com/showthread.php?t=1614366
Download the appropriate HBOOT + firmware combo. Rename to PH98IMG.zip and flash via bootloader. It'll give you the appropriate version. You will lose your customer recovery so you will need to reflash that as well.
thatsricci said:
it will install a new hboot and all... it won't affect s-off ever.
hboot-2.25.0000
radio-1.22.10.0421r/1.22.10.0424r
openDSP-v13.6.0.7611.00.0104
you'll have to re-install amonRA as well, but it all works great. join us on irc if you need more help.
i don't know what he's talking about with the heat, works great if you install everything kernels/radios..et al.
Click to expand...
Click to collapse
So let me see if I have this right. I rename the ruu to PH98IMG.zip then put it and the new firmware patch on my sd card. Then flash the PH98IMG.zip and patch in recovery.
Hotweelz66 said:
So let me see if I have this right. I rename the ruu to PH98IMG.zip then put it and the new firmware patch on my sd card. Then flash the PH98IMG.zip and patch in recovery.
Click to expand...
Click to collapse
Read the link I posted...and yes.
Cares said:
Read the link I posted...and yes.
Click to expand...
Click to collapse
Thanks Cares. I read the post. It says something about wipe/factory reset. Do I really need to do that? Also will it wipe my sd card?
Hotweelz66 said:
Thanks Cares. I read the post. It says something about wipe/factory reset. Do I really need to do that? Also will it wipe my sd card?
Click to expand...
Click to collapse
do the new firmware patch first, since you can't have two ph98img.zip's at the same time
after new firmware completes you can run the amonRA recovery install the same way (ph98img.zip file)
wiping is always a good idea when upgrading like this, to ensure no settings cause any problems.
thatsricci said:
do the new firmware patch first, since you can't have two ph98img.zip's at the same time
after new firmware completes you can run the amonRA recovery install the same way (ph98img.zip file)
wiping is always a good idea when upgrading like this, to ensure no settings cause any problems.
Click to expand...
Click to collapse
So will I lose root when I flash this? Also will I need to reinstall my rom (CR 4.4)? Will this wipe my sd card?
Hotweelz66 said:
So will I lose root when I flash this? Also will I need to reinstall my rom (CR 4.4)? Will this wipe my sd card?
Click to expand...
Click to collapse
You shouldn't lose root...I didn't...but if you do just run the "all-in-one- toolkit" and reroot it.
So he can go straight from a custom ROM to the newest leak update without having to ruu back to a stock ROM? Just curious. Is that a benefit of soff?
Sent from my ADR6425LVW using XDA
Cares said:
You shouldn't lose root...I didn't...but if you do just run the "all-in-one- toolkit" and reroot it.
Click to expand...
Click to collapse
Thanks again. I will go ahead and go for it then. I think I have it all down now. Will report back later on how it went. Yard work comes first, LOL.
Daemontrain said:
So he can go straight from a custom ROM to the newest leak update without having to ruu back to a stock ROM? Just curious. Is that a benefit of soff?
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
This is my process:
1) Was on S-ON, HBOOT 2.11, CleanROM DE with GB firmware patch
2) Got S-OFF, ROM ran perfectly normal still
3) Flash firmware+radio+ICS HBOOT combo
4) Reflashed recovery
5) Wiped and reflashed CleanROM
Cares said:
This is my process:
1) Was on S-ON, HBOOT 2.11, CleanROM DE with GB firmware patch
2) Got S-OFF, ROM ran perfectly normal still
3) Flash firmware+radio+ICS HBOOT combo
4) Reflashed recovery
5) Wiped and reflashed CleanROM
Click to expand...
Click to collapse
So if I was S-OFF, already on ICS (let's say 3.11 firmware) and CleanROM 4.2.2 and I wanted to go to the new leak, how would I proceed?
Daemontrain said:
So if I was S-OFF, already on ICS (let's say 3.11 firmware) and CleanROM 4.2.2 and I wanted to go to the new leak, how would I proceed?
Click to expand...
Click to collapse
you'd download the 600mb 3.14 leak file, check the md5, rename it to ph98img.zip and put it on your sd card... reboot the phone to the bootloader and flash it (it'll take a while to flash, with an automatic restart or two)
Daemontrain said:
So if I was S-OFF, already on ICS (let's say 3.11 firmware) and CleanROM 4.2.2 and I wanted to go to the new leak, how would I proceed?
Click to expand...
Click to collapse
Flash the 5/7 radios found in post 3 in NilsP business sense thread. Then flash Jb patched 2.21 hboot then flash latest Cleanrom, flavor of your choosing.
Sent from my ADR6425LVW using XDA
Well finally got time to sit down and get this done. I just followed what Cares suggested. Everthing went fine and it was smooth as silk. Was on CR4.4 but decided I wanted to go ahead and update to CR4.5. Didn't affect my root, S-off or sd card. Thanks again.
Hello all. I'm new to the site and hope someone can give me some direction or thoughts on what my phone has going on. I bought a Rezound that will not boot, it comes up with a rainbow striped screen and then "ANDROID" then if it makes it to start screen it has an error that locks the phone up. "The process com.android.phone has stopped unexpectedly. Please try again." It has a Force Close button but by this time the phone is frozen and does not respond except to a battery pull. I can get it into hboot but thats it. Restore does not work either.
The following is the info from the hboot screen maybe it will help.
VIGOR XB ENG S-OFF
HBOOT -1.57.2000 (PH9810000)
RADIO - 0.05.10.0620r/0.00.38.0620r
OpenDSP - 6.0.43.02.0617
eMMC-boot
Jun 21 2011, 00:43:13
Please let me know if I can fix this phone or what you think.
Thanks,
Mike
mobilephonemechanix said:
Hello all. I'm new to the site and hope someone can give me some direction or thoughts on what my phone has going on. I bought a Rezound that will not boot, it comes up with a rainbow striped screen and then "ANDROID" then if it makes it to start screen it has an error that locks the phone up. "The process com.android.phone has stopped unexpectedly. Please try again." It has a Force Close button but by this time the phone is frozen and does not respond except to a battery pull. I can get it into hboot but thats it. Restore does not work either.
The following is the info from the hboot screen maybe it will help.
VIGOR XB ENG S-OFF
HBOOT -1.57.2000 (PH9810000)
RADIO - 0.05.10.0620r/0.00.38.0620r
OpenDSP - 6.0.43.02.0617
eMMC-boot
Jun 21 2011, 00:43:13
Please let me know if I can fix this phone or what you think.
Thanks,
Mike
Click to expand...
Click to collapse
did you update to an ICS rom and this started to happen?
synisterwolf said:
did you update to an ICS rom and this started to happen?
Click to expand...
Click to collapse
Unfortunately I do not know what the history of the phone is. All I know is that when I got the phone it was doing as I descibed above. I do cell phone repairs for a living but I am not software savvy. I was hoping by the phones stats that someon might be able to pin point what happened and direct me to a fix.
mobilephonemechanix said:
Unfortunately I do not know what the history of the phone is. All I know is that when I got the phone it was doing as I descibed above. I do cell phone repairs for a living but I am not software savvy. I was hoping by the phones stats that someon might be able to pin point what happened and direct me to a fix.
Click to expand...
Click to collapse
ah, ok. so we should start from scratch then.
best way to get this up and running again is to flash the latest RUU.
please have a full battery
http://androidrevolutions.com/neo/GlobalRuuPH98IMG.zip
rename the file to PH98IMG.zip
place on the root of an sd card
boot into hboot by holding volume down and power.
let this run first update will be fast and act like it reboots. let it do its thing. it will put you into fastboot. click the option to go into hboot and it will run again
this time it will take forever.
once it updates, you will have a bone stock phone. from there you can flash a recovery of your choice then flash a rom of your choice.
Wow. I've not seen a dev/debug s off rez in a LONG time. Do the RUU then flash a patched 2.25 hboot. From there factory reset in bootloader. Confirm boot and make sure you get at least boot animation. After that head back into hboot, flash a custom recovery and reflash the rom.
Sent from my ADR6425LVW using Xparent Red Tapatalk 2
Thanks for the advice. I will give that a shot. Now I am new to all this so excuse the question but when you say to place on the root of an sd card, you mean the sd card that goes in the phone? If so how to i get the file to the sd card from a PC? Sorry
mobilephonemechanix said:
Thanks for the advice. I will give that a shot. Now I am new to all this so excuse the question but when you say to place on the root of an sd card, you mean the sd card that goes in the phone? If so how to i get the file to the sd card from a PC? Sorry
Click to expand...
Click to collapse
Card reader or if you have a custom recovery already boot into it by going through bootloader then mount USB mass storage in there.
Sent from my ADR6425LVW using Xparent Red Tapatalk 2
Thanks! Last question before I head off to try this. If I do the update with the RUU and it succeeds and i am left with the bone stock phone will I have to flash a recovery and flash a rom for it to work? Or can I stop after the RUU?
mobilephonemechanix said:
Thanks! Last question before I head off to try this. If I do the update with the RUU and it succeeds and i am left with the bone stock phone will I have to flash a recovery and flash a rom for it to work? Or can I stop after the RUU?
Click to expand...
Click to collapse
when you flash the ruu it turns the phone back to stock right out of the box. if you like it that way, you can keep it.
mobilephonemechanix said:
Thanks! Last question before I head off to try this. If I do the update with the RUU and it succeeds and i am left with the bone stock phone will I have to flash a recovery and flash a rom for it to work? Or can I stop after the RUU?
Click to expand...
Click to collapse
No you will be left with an s off rezound that's on OTA firmware and rom unrooted. To avoid confusion, reply when you get everything set up after running the RUU.
Sent from my ADR6425LVW using Xparent Red Tapatalk 2
Snuzzo said:
No you will be left with an s off rezound that's on OTA firmware and rom unrooted. To avoid confusion, reply when you get everything set up after running the RUU.
Sent from my ADR6425LVW using Xparent Red Tapatalk 2
Click to expand...
Click to collapse
im out of thanks so :good: will have to do.
how did the RUU flash go???
just wondering.
synisterwolf said:
how did the RUU flash go???
just wondering.
Click to expand...
Click to collapse
Have not done it yet. Going to get sd card reader tonight and will try tomorrow. I will keep you posted. Thanks for all the advice.
mobilephonemechanix said:
Have not done it yet. Going to get sd card reader tonight and will try tomorrow. I will keep you posted. Thanks for all the advice.
Click to expand...
Click to collapse
no worries. ill check back this weekend to see if you need anymore help ^_^
synisterwolf said:
no worries. ill check back this weekend to see if you need anymore help ^_^
Click to expand...
Click to collapse
Okay. So I put the zip file on the sd card ran the hboot twice and then did a reboot and it still does the same thing as before where it freezes up after a series of force close errors.
How can I tell if the RUU was loaded correctly?
mobilephonemechanix said:
Okay. So I put the zip file on the sd card ran the hboot twice and then did a reboot and it still does the same thing as before where it freezes up after a series of force close errors.
How can I tell if the RUU was loaded correctly?
Click to expand...
Click to collapse
Boot into Hboot and tell me what the info says top left please
Sent from my iPhone 5 using Tapatalk 2
synisterwolf said:
Boot into Hboot and tell me what the info says top left please
Sent from my iPhone 5 using Tapatalk 2
Click to expand...
Click to collapse
VIGOR XB ENG S-OFF
HBOOT -1.57.2000 (PH9810000)
RADIO - 0.05.10.0620r/0.00.38.0620r
OpenDSP - 6.0.43.02.0617
eMMC-boot
Jun 21 2011, 00:43:13
Same as when I started.
When I am loading the RUU it says:
SD Checking..
Loading...(PH98DIAG.zip)
No Image!
Loading...(PH98DIAG.nbh)
No Image or wrong image!
Loading..(PH98IMG.zip)
Then the blue status bar on the right starts to fill up. Then when it is done it repeats the pervious dialog really fast then it just goes back to hboot screen.
Try renaming to ph98diag
Sent from my Nexus 7 using Tapatalk HD
mobilephonemechanix said:
VIGOR XB ENG S-OFF
HBOOT -1.57.2000 (PH9810000)
RADIO - 0.05.10.0620r/0.00.38.0620r
OpenDSP - 6.0.43.02.0617
eMMC-boot
Jun 21 2011, 00:43:13
Same as when I started.
When I am loading the RUU it says:
SD Checking..
Loading...(PH98DIAG.zip)
No Image!
Loading...(PH98DIAG.nbh)
No Image or wrong image!
Loading..(PH98IMG.zip)
Then the blue status bar on the right starts to fill up. Then when it is done it repeats the pervious dialog really fast then it just goes back to hboot screen.
Click to expand...
Click to collapse
make sure its all caps PH89IMG.zip
also can you post the zip that you are trying to use. i want to make sure it's the correct format.
synisterwolf said:
make sure its all caps PH89IMG.zip
also can you post the zip that you are trying to use. i want to make sure it's the correct format.
Click to expand...
Click to collapse
I renamed the file to PH98DIAG.zip and it looked like it was going to work but still nothing.
Not sure how to post the zip file like you are asking?
Hello, I desperately would like to see how to put my HTC Amaze back to stock. A couple of months ago I tried putting it back to stock because the energy rom kept rebooting on me and draining my battery life randomly. Anyways I was not successful and so I just kept the rom and the rebooting problems stopped anyways. Now, its happening again and I would really love for some one to help me get it back to stock so I can see if it improves and maybe get the thing S-OFF later. I am with Wind mobile.
Any help is greatly appreciated,
A frustrated amaze user.
rspierz said:
Hello, I desperately would like to see how to put my HTC Amaze back to stock. A couple of months ago I tried putting it back to stock because the energy rom kept rebooting on me and draining my battery life randomly. Anyways I was not successful and so I just kept the rom and the rebooting problems stopped anyways. Now, its happening again and I would really love for some one to help me get it back to stock so I can see if it improves and maybe get the thing S-OFF later. I am with Wind mobile.
Any help is greatly appreciated,
A frustrated amaze user.
Click to expand...
Click to collapse
Well since you're s on lock your bootloader and flash a wind ruu from bootloader you can find the necessary thread in development section
Sent from my HTC_Amaze_4G using xda premium
ravike14 said:
Well since you're s on lock your bootloader and flash a wind ruu from bootloader you can find the necessary thread in development section
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
Hey thanks for the response. So I locked the bootloader and then got the wind RUU renamed it as PH85img.zip or w/e its supposed to be. And now when in the boot screen it cannot find my file I then tried another RUU but this time is used the exe wind one but that one failed as well and came up as an error saying the hboot version is older then what im flashing or something?
So I am stuck at this point. Do you know how to get around this?
Make sure the ruu is on the root of the sd card
Sent from my SGH-T999 using Tapatalk 2
rspierz said:
Hey thanks for the response. So I locked the bootloader and then got the wind RUU renamed it as PH85img.zip or w/e its supposed to be. And now when in the boot screen it cannot find my file I then tried another RUU but this time is used the exe wind one but that one failed as well and came up as an error saying the hboot version is older then what im flashing or something?
So I am stuck at this point. Do you know how to get around this?
Click to expand...
Click to collapse
well you cant flash a exe you have to connect your phone to the pc and run the exe from pc and bout the hboot whats your current version? :/
ravike14 said:
well you cant flash a exe you have to connect your phone to the pc and run the exe from pc and bout the hboot whats your current version? :/
Click to expand...
Click to collapse
Yeah it was connected via usb. I got somewhere, now but im am hoping you can tell me what i need to do now. I followed the second post here : http://forum.xda-developers.com/showthread.php?t=2167596 and now I have GB rom on my phone running unlocked. What do I need to do from here so I can S-off and super CID? PS I tried doing an OTA update from the phone and it wont work.
Looking into the S-off guide it says i must be on a stock RUU. is the one i got install a stock RUU. Also my hboot version is 1.93.0002 (Mar 15 2012) which is ice cream sandwich according to the Unlimited.IO site, but the RUU im on is definitely gingerbread. What can I do about this?
rspierz said:
Looking into the S-off guide it says i must be on a stock RUU. is the one i got install a stock RUU. Also my hboot version is 1.93.0002 (Mar 15 2012) which is ice cream sandwich according to the Unlimited.IO site, but the RUU im on is definitely gingerbread. What can I do about this?
Click to expand...
Click to collapse
What is your android version in settings?? Cuz what your telling is kinda weird
Sent from my HTC_Amaze_4G using xda premium
Adroid Version: 2.3.4
HTC Sense version: 3.0
Software number 1.43.531.3
am I completely screwed now? Cause it seems i wont be able to get S-off or CID off while not on this unsigned rom (t-mobile), i am with Wind. The OTA does not work while on the phone (settings > software update). Would locking my bootloader and then loading the latest OTA zip from wind on the SD card work? I am very stuck!
rspierz said:
am I completely screwed now? Cause it seems i wont be able to get S-off or CID off while not on this unsigned rom (t-mobile), i am with Wind. The OTA does not work while on the phone (settings > software update). Would locking my bootloader and then loading the latest OTA zip from wind on the SD card work? I am very stuck!
Click to expand...
Click to collapse
well you have ginger bread so try the jbear GB s off tool in ubuntu
but what about the hboot version being ICS? Do you think it should still work?
rspierz said:
but what about the hboot version being ICS? Do you think it should still work?
Click to expand...
Click to collapse
what bout your CID?
I havent done anything to the CID, so I believe it is still locked to wind?
rspierz said:
I havent done anything to the CID, so I believe it is still locked to wind?
Click to expand...
Click to collapse
well choice is yours your android version says GB hboot says ICS :/ i say try the GB s-off tool but do at your own risk...
well S-Off worked so thats good haha. Now i am trying to super CID. However, when uploading the proper hboot for doing so it wont let me because of the CID.
Ignore that last post. I figured it out so all is good. Now here is another question, should i flash CM10.1 or your rom that viper one? How would I go about flashing a rom. I remembered before you would just go into recovery and then format all execpt sd card and then install from zip. I tried that with the CM10.1 rom and when I rebooted it did not work.
went ahead and tried installing the Viper rom and after i reboot (when it said all was good) it show a black screen with green arrows. And its stuck on that. I do not know what to do now. Because I should have everything open. Was I supposed to flash something after doing the S-OFF?
This is what I am getting stuck on. I tried another rom too, same thing. I can boot into 4ext. But cant get past this on boot up.
rspierz said:
This is what I am getting stuck on. I tried another rom too, same thing. I can boot into 4ext. But cant get past this on boot up.
Click to expand...
Click to collapse
Now your s off BUT you have gb firmware so you have to flash a ruu 1st then flash a recovery then supersu or just flash any rom you want if you decide to stay with the ruu stock rom to gain root permission flash supersu
Sent from my HTC_Amaze_4G using xda premium
I recently bought a replacement Rezound, which has Hboot 2.25/Radios 1.22.10 0421r &0424r. I have unlocked the bootloader and installed TWERP 2.6.3.0 and Infection 2.9.1. I am sure I should have thought of this before installing Infection, but my battery life is worse than my original phone and it runs hot. No reboots or other problems.
I have searched for instructions and recommendations for upgrading Hboot, but haven't found anything clear enough to overcome my nervousness about this process. I have one bricked phone on the desk in front of me and I don't want another. I will be grateful to anyone who can recommend what Hboot to flash (I'm thinking 2.27 or 2.28?) and guide me through the process.
Thanks,
geronimo48 said:
I recently bought a replacement Rezound, which has Hboot 2.25/Radios 1.22.10 0421r &0424r. I have unlocked the bootloader and installed TWERP 2.6.3.0 and Infection 2.9.1. I am sure I should have thought of this before installing Infection, but my battery life is worse than my original phone and it runs hot. No reboots or other problems.
I have searched for instructions and recommendations for upgrading Hboot, but haven't found anything clear enough to overcome my nervousness about this process. I have one bricked phone on the desk in front of me and I don't want another. I will be grateful to anyone who can recommend what Hboot to flash (I'm thinking 2.27 or 2.28?) and guide me through the process.
Thanks,
Click to expand...
Click to collapse
look at my downgrade/upgrade guide here in the rezound q&a.....the 3 ph98img ota files are the updates you want
REV3NT3CH said:
look at my downgrade/upgrade guide here in the rezound q&a.....the 3 ph98img ota files are the updates you want
Click to expand...
Click to collapse
Your initial comment, "For this you MUST BE S-OFF FOR DOWNGRADING with a relocked bootloader and make sure you are not on a custom or hex edited hboot or you can brick your device." stopped me. My phone is S-on and Hboot is unlocked. Do I have to be S-off and unlocked to flash the three OTAs?
geronimo48 said:
Your initial comment, "For this you MUST BE S-OFF FOR DOWNGRADING with a relocked bootloader and make sure you are not on a custom or hex edited hboot or you can brick your device." stopped me. My phone is S-on and Hboot is unlocked. Do I have to be S-off and unlocked to flash the three OTAs?
Click to expand...
Click to collapse
yes thats for downgrading with the ruu.exe's not for updating...to update just follow the OTA part with the ph98img.zips
REV3NT3CH said:
yes thats for downgrading with the ruu.exe's not for updating...to update just follow the OTA part with the ph98img.zips
Click to expand...
Click to collapse
I downloaded all three files and checked md5 - all checked out. I then put the 1st file on the root directory of my ex sd card, renamed it PH98IMG.zip and rebooted into the unlocked bootloader. Bootloader recognized the zip, the progress bar appeared and the file transferred. Then the progress bar disappeared and nothing else happened. There was no instruction to press Volume up. I repeated everything and got the same result. I can still boot into TWERP and my phone still starts up with Infection 2.9.1.
Let me say at this point, THANK GOD NOTHING BAD HAPPENED!
Any suggestions?
geronimo48 said:
I downloaded all three files and checked md5 - all checked out. I then put the 1st file on the root directory of my ex sd card, renamed it PH98IMG.zip and rebooted into the unlocked bootloader. Bootloader recognized the zip, the progress bar appeared and the file transferred. Then the progress bar disappeared and nothing else happened. There was no instruction to press Volume up. I repeated everything and got the same result. I can still boot into TWERP and my phone still starts up with Infection 2.9.1.
Let me say at this point, THANK GOD NOTHING BAD HAPPENED!
Any suggestions?
Click to expand...
Click to collapse
hmmm for s and g's relock the bootloader....are you absolutely sure you are on 2.25...the first ph98img is hboot 2.27 with the firmware....also just rename it to just PH98IMG if you type the zip with it the phone will read it as PH98IMG.zip.zip and wont work
REV3NT3CH said:
hmmm for s and g's relock the bootloader....are you absolutely sure you are on 2.25...the first ph98img is hboot 2.27 with the firmware....also just rename it to just PH98IMG if you type the zip with it the phone will read it as PH98IMG.zip.zip and wont work
Click to expand...
Click to collapse
I am looking at my Hboot screen. It says:
VIGOR PVT SHIP S-ON RL
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
OpenDSP-v13.6.0.7611.00.0104
eMMC-boot
Apr 12 2012, 16:47:46
I transferred the 1st file to my SD card and deleted "this 1st " from the name. I watched it reading in Hboot and saw "PH98IMG.ZIP".
I'll try relocking the bootloader.
Thanks.
EDIT - Looks like the bootloader needs to be locked. The first file is finished, starting on the second.
EDIT 2 - OK. I can't get the 2nd file to flash with the bootloader locked or unlocked.
BUT, I now have:
HBOOT-2.27.000
RADIO-2.22.20.0801r/2.22.10.0803r
geronimo48 said:
I am looking at my Hboot screen. It says:
VIGOR PVT SHIP S-ON RL
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
OpenDSP-v13.6.0.7611.00.0104
eMMC-boot
Apr 12 2012, 16:47:46
I transferred the 1st file to my SD card and deleted "this 1st " from the name. I watched it reading in Hboot and saw "PH98IMG.ZIP".
I'll try relocking the bootloader.
Thanks.
EDIT - Looks like the bootloader needs to be locked. The first file is finished, starting on the second.
Click to expand...
Click to collapse
ah thanks for the info bud much appreciated....glad relocking it worked for you
REV3NT3CH said:
ah thanks for the info bud much appreciated....glad relocking it worked for you
Click to expand...
Click to collapse
Please see EDIT 2. I can't flash the 2nd file with the bootloader locked or unlocked.
I can boot into Hboot, but when I try to open Recovery I first get the green arrows (circle and down), then I get the red triangle with exclamation mark. When I booted the phone I got the setup wizard and a notice that my phone was just activated. Of course it was already activated. I suppose this just means everything has been wiped and I'm starting fresh with the firmware from the 1st downloaded zip. I didn't go through setup.
Any ideas?
geronimo48 said:
Please see EDIT 2. I can't flash the 2nd file with the bootloader locked or unlocked.
I can boot into Hboot, but when I try to open Recovery I first get the green arrows (circle and down), then I get the red triangle with exclamation mark. When I booted the phone I got the setup wizard and a notice that my phone was just activated. Of course it was already activated. I suppose this just means everything has been wiped and I'm starting fresh with the firmware from the 1st downloaded zip. I didn't go through setup.
Any ideas?
Click to expand...
Click to collapse
yes....after 1st ota phone is suppose to activate through verizon
REV3NT3CH said:
yes....after 1st ota phone is suppose to activate through verizon
Click to expand...
Click to collapse
Any ideas on how to install the other two OTAs?
geronimo48 said:
Any ideas on how to install the other two OTAs?
Click to expand...
Click to collapse
all 3 install through bootloader....must have a relocked bootloader...the other 2 ph98img.zip's are not firmware or rom....just radios, hboot, and required system files for them
REV3NT3CH said:
all 3 install through bootloader....must have a relocked bootloader...the other 2 ph98img.zip's are not firmware or rom....just radios, hboot, and required system files for them
Click to expand...
Click to collapse
I noticed they were smaller. I installed the 1st OTA with the bootloader relocked. The 2nd OTA wouldn't complete installation locked or unlocked. I reflashed the first OTA just to make sure and the process worked flawlessly. The 2nd OTA acts like it is loading, but I don't get the notice to press Vol Up.
If you think of a way that might work to get the other OTAs installed, let me know.
Thanks again for all your help.
geronimo48 said:
I noticed they were smaller. I installed the 1st OTA with the bootloader relocked. The 2nd OTA wouldn't complete installation locked or unlocked. I reflashed the first OTA just to make sure and the process worked flawlessly. The 2nd OTA acts like it is loading, but I don't get the notice to press Vol Up.
If you think of a way that might work to get the other OTAs installed, let me know.
Thanks again for all your help.
Click to expand...
Click to collapse
Same issue here thanks for addressing it.
drhile said:
Same issue here thanks for addressing it.
Click to expand...
Click to collapse
hmm strange....works for some doesnt for others...i know flyhalf posted a method of this somewhere for s-on users...required extra step i think
geronimo48 said:
Any ideas on how to install the other two OTAs?
Click to expand...
Click to collapse
I guess you haven't thought of anything.
I am thinking of having another go at installing all three OTAs. I have installed CWM and TACHYON. I don't have FCs or bootloops, but my battery life is poor, the camera doesn't work and the phone runs hot (>110). I have tried SetCPU with limited success.
You and others have stated that outdated HBOOT/radios can cause overheating, so I want to try.
Question: Do I need to do a factory reset and start over with the 1st OTA?
Thanks again for all of your help.
geronimo48 said:
I guess you haven't thought of anything.
I am thinking of having another go at installing all three OTAs. I have installed CWM and TACHYON. I don't have FCs or bootloops, but my battery life is poor, the camera doesn't work and the phone runs hot (>110). I have tried SetCPU with limited success.
You and others have stated that outdated HBOOT/radios can cause overheating, so I want to try.
Question: Do I need to do a factory reset and start over with the 1st OTA?
Thanks again for all of your help.
Click to expand...
Click to collapse
If you're at hboot 2.27, that's not your problem, you have other issues, being you're s-on, how did you flash the kernel for Tachyon?
geronimo48 said:
I guess you haven't thought of anything.
I am thinking of having another go at installing all three OTAs. I have installed CWM and TACHYON. I don't have FCs or bootloops, but my battery life is poor, the camera doesn't work and the phone runs hot (>110). I have tried SetCPU with limited success.
You and others have stated that outdated HBOOT/radios can cause overheating, so I want to try.
Question: Do I need to do a factory reset and start over with the 1st OTA?
Thanks again for all of your help.
Click to expand...
Click to collapse
as stated there is a method with the last two foe s-on users...having to use fastboot i believe
REV3NT3CH said:
as stated there is a method with the last two foe s-on users...having to use fastboot i believe
Click to expand...
Click to collapse
Thanks. I'll post if I figure it out.
geronimo48 said:
Thanks. I'll post if I figure it out.
Click to expand...
Click to collapse
according to flyhalf as the this 3rd was uploaded by him you just need a relocked bootloader for s-on....im s-off though but can guarantee links work as i just used them...but in all seriouness if your not really using stock i highly suggest gaining s-off as it will make life easier....plus it has less of a chance on fully and permanently bricking your rez...with s-on there isnt really much you can do in a brick