Related
Hey guys, I just got my new HTC hero. I'm with AT&T now and having the unlimited 3G data plan. I setup the configurations of APN settings as following:
Access point: wap.cingular
Username: [email protected]
Password: CINGULAR1
But I only see an "E" at the connection status which I believe indicates EDGE. Can anyone tell me how to get 3G work on this device?
Thanks a lot!!!
I didn't realise the hero was out in the us yet but if it is i don't know why and if it isn't out its because i don't think it surpports american 3g networks i think you can only get 2g.
Yes I got this phone out of the US.
So you mean there's no way at all to get 3G to work on this phone with AT&T or any other carriers?
In its current state the phone does not support the AT&T bands for 3g.
There are rumors of an AT&T version coming October 11th, that would support 3g.
European/Asian version of this phone does not work with US 3G. AT&T's 3G network requires the bands 850 & 1900, while T-mobile's 3G requires the bands 1700 & 2100. European/Asian version supports only the bands 900 & 2100.
Does this mean T-mobile 3G may work on this phone?
T-Mob's 3g should connect to this phone, if you could find a signal, haha.
http://www.androidauthority.com/index.php/2009/07/03/htc-hero-approved-by-the-fcc-with-att-3g/
Neither T-Mobile US nor AT&T will work with this phone for 3G. The only version of this phone that exists at the moment supports ONLY European 3G. There are rumors of the device coming to AT&T, but nothing confirmed. IF that happens, the new phones would work, but that wouldn't change the fact that the device you have will still only function on Edge.
Sorry to be the bearer of bad news, but it's true.
It's actually Sprint pal. Also, there was a picture for Tmobile also (this appears to be a rumor).
T-Mob uses the 2100 spectrum so i dont see why it wouldnt work.
And a CDMA and a GSM (With AT&T 3g bands) has gone through the FCC recently.
RBFG said:
T-Mob uses the 2100 spectrum so i dont see why it wouldnt work.
And a CDMA and a GSM (With AT&T 3g bands) has gone through the FCC recently.
Click to expand...
Click to collapse
No, it won't work with t-mobile USA's 3G network.
Yes, T-mobile in Europe use the 2100 band for 3G so the Hero works. But T-mobile USA use 1700 and 2100 bands for 3G, and you need a phone that support BOTH bands to connect to its 3G network.
Unfortunately, unless T-mobile USA decides to carry this phone (and they have already said that they wouldn't), there won't be a version of Hero that support its 3G network. This is because T-mobile USA is the only carrier in the world that uses the 1700 band for 3G. You may ask why T-mobile uses different bands for 3G in different countries. This is more of a regulatory decision than a business decision. If you are interested, go read about those FCC spectrum auctions.
All in all, European/Asian version of the Hero won't work with any 3G network in the US. The product id of the European/Asian Hero is HERO100, it supports only the bands 900 and 2100 for 3G. There will be a North American version with product id HERO130 that supports the bands 850 and 1900. It will be released either on AT&T or on the Canadian carrier Rogers, because only these two carriers use these bands for 3G. Currently it is not know whether it will be on AT&T or Rogers, but that latter is more likely IMO. Finally, there will be a CDMA version, with product id HERO200, for Sprint. This is more or less confirmed to be coming in October.
T-mobile US 3G uses 1700 for down and 2100 mhz for uplink. So 2100 alone isn't enough as you need both directions to connect.
tsekh501 said:
No, it won't work with t-mobile USA's 3G network.
Yes, T-mobile in Europe use the 2100 band for 3G so the Hero works. But T-mobile USA use 1700 and 2100 bands for 3G, and you need a phone that support BOTH bands to connect to its 3G network.
Unfortunately, unless T-mobile USA decides to carry this phone (and they have already said that they wouldn't), there won't be a version of Hero that support its 3G network. This is because T-mobile USA is the only carrier in the world that uses the 1700 band for 3G. You may ask why T-mobile uses different bands for 3G in different countries. This is more of a regulatory decision than a business decision. If you are interested, go read about those FCC spectrum auctions.
All in all, European/Asian version of the Hero won't work with any 3G network in the US. The product id of the European/Asian Hero is HERO100, it supports only the bands 900 and 2100 for 3G. There will be a North American version with product id HERO130 that supports the bands 850 and 1900. It will be released either on AT&T or on the Canadian carrier Rogers, because only these two carriers use these bands for 3G. Currently it is not know whether it will be on AT&T or Rogers, but that latter is more likely IMO. Finally, there will be a CDMA version, with product id HERO200, for Sprint. This is more or less confirmed to be coming in October.
Click to expand...
Click to collapse
Thanks! That was very informative, although it totally crushed my dreams of owning a Hero while remaining on the T-Mobile network.
Hey,
The T9193 version of the HD2 has the radio bands 850/2100 in it for HSDPA 3G speeds, but just the 850 band is needed to support AT&T's 3G service in the US.
Would it be possible to create a new radio ROM that disables/turns-off the 2100 band for U.S. users, since this band is useless anyway, and it may help extend the battery life of our HD2 by not having to power the 2100 section of the radio, especially if it makes any transmit attempts by the phone on the 2100 band (transmitting uses a lot more power then receiving).
Any chance of this?
JohnCody said:
Hey,
The T9193 version of the HD2 has the radio bands 850/2100 in it for HSDPA 3G speeds, but just the 850 band is needed to support AT&T's 3G service in the US.
Would it be possible to create a new radio ROM that disables/turns-off the 2100 band for U.S. users, since this band is useless anyway, and it may help extend the battery life of our HD2 by not having to power the 2100 section of the radio, especially if it makes any transmit attempts by the phone on the 2100 band (transmitting uses a lot more power then receiving).
Any chance of this?
Click to expand...
Click to collapse
T-mobile is also using HSPDA/3G @ 850 also and nowhere else? I hope so because pretty much half or better of the users of these forums are T-Mobile and *not* AT&T subscribers. Jus sayin.
JohnCody said:
Hey,
The T9193 version of the HD2 has the radio bands 850/2100 in it for HSDPA 3G speeds, but just the 850 band is needed to support AT&T's 3G service in the US.
Would it be possible to create a new radio ROM that disables/turns-off the 2100 band for U.S. users, since this band is useless anyway, and it may help extend the battery life of our HD2 by not having to power the 2100 section of the radio, especially if it makes any transmit attempts by the phone on the 2100 band (transmitting uses a lot more power then receiving).
Any chance of this?
Click to expand...
Click to collapse
ROM cooks do not have such fine grain control over radio bands.... Sorry.
I don't believe the T9193's radio has the 2100 Mhz band, otherwize I'd be able to use it in my area to get 3G coverage. (We only have Edge on the 850 Mhz band here)
Hopefully someone who knows for sure can answer this.
JohnCody said:
Hey,
The T9193 version of the HD2 has the radio bands 850/2100 in it for HSDPA 3G speeds, but just the 850 band is needed to support AT&T's 3G service in the US.
Would it be possible to create a new radio ROM that disables/turns-off the 2100 band for U.S. users, since this band is useless anyway, and it may help extend the battery life of our HD2 by not having to power the 2100 section of the radio, especially if it makes any transmit attempts by the phone on the 2100 band (transmitting uses a lot more power then receiving).
Any chance of this?
Click to expand...
Click to collapse
Hi mate,
you already tried this?
In Dialer > Menu (right soft-buttom) > Baseband > Band Frequency
or
Start > Settings > Personal Settings > Phone
But 850 Mhz is just for GSM not WCDMA... it's right?
2udCrRAZdK said:
I don't believe the T9193's radio has the 2100 Mhz band, otherwize I'd be able to use it in my area to get 3G coverage. (We only have Edge on the 850 Mhz band here)
Hopefully someone who knows for sure can answer this.
Click to expand...
Click to collapse
I'm pretty sure the T9193 has the 2100 band, but 2100 is useless in the US because AT&T uses 850/1900 for 3G. The T9193 is an Australian phone made for Telstar (their cell phone company). The 3G bands used over there are 850/2100. So, because AT&T also uses the 850 band, thats why we are able to use this phone with AT&T's 3G here over in the US.
However, the 2100 band of the phone is useless in the US because is was intended to be used for 3G in australia.
The good news is that AT&T is phasing out the 1900 band for 3G and switching everything over to 850, so the HD2 will just get more and more 3G coverage as time goes on and then even the 1900 band won't be used anymore so it would be irrelevant if the HD2 has a 1900 band or a 2100 band because both would be useless.
NRGZ28 said:
ROM cooks do not have such fine grain control over radio bands.... Sorry.
Click to expand...
Click to collapse
Gotcha - thanks for the info.
2udCrRAZdK said:
I don't believe the T9193's radio has the 2100 Mhz band, otherwize I'd be able to use it in my area to get 3G coverage. (We only have Edge on the 850 Mhz band here)
Hopefully someone who knows for sure can answer this.
Click to expand...
Click to collapse
Well, you neglected to say where "here" is
The best available combination for world-wide 3G access is 850/2100 Mhz. This is because:
1) 850Mhz is used in Canada, US, S Americas, Aus, S Africa for 3G broadcasting in regional areas (and in some city areas)
2) 2100Mhz is used in Asia, EU, Aus cities for 3G broadcasting
This is due to the actual physics of velocity = frequency x wavelength
Some telcos use 1900Mhz in the cities, but also broadcast in 850Mhz
Other telcos use 900Mhz in the regional areas, but also broadcast in 2100Mhz in the cities
ATT in the US uses 850mhz in the regionals and 1900Mhz in the cities. This ensures that "their" PDA's cannot use other SIM's - I have no idea why the dumbed-down US market meekly accepts that
The perfect combo is tri-frequency hardware, such as PDA manufacturers used to provide but do not any more (no excuses, it's just straight cost-cutting and sleight-of-hand marketing BS to suit the greedy telcos)
The HD2 released in Aus through Telstra is hardware-filtered for 2100/850 Mhz, the best available combo for world-wide use (not perfect, of course)
The HD2 released in EU/Asia is 2100/900 Mhz. This will access 3G in most cities world-wide (note that China uses 2100/850) but has limited coverage in regional areas - yes, I know there many 900 Mhz deployments but these are very limited geographically
The HD2 released in the US is 1900/850 Mhz. This is very limited for world-wide cities and excludes 3G coverage for those countries that use 2100/900 Mhz
None of this has any relation to GSM coverage, so please do not confuse them
Is the hardware actually different?
I live in NZ and unfortunately bought a T-Mobile unit which is set up for 1700/2100mHz which means that when in the cities I get full broadband, but in the regions I only get dial up speeds through GSM.
My question is does anyone know if the hardware could actually use the 900mhz broadband - or is it a pipe dream on my part that hopefully someone will release a ROM to access some previously hidden hardware?
I do recall with my Touch that there was a GPS built into the hardware that no-one was aware of for a year or two!
mikey555 said:
I live in NZ and unfortunately bought a T-Mobile unit which is set up for 1700/2100mHz which means that when in the cities I get full broadband, but in the regions I only get dial up speeds through GSM.
My question is does anyone know if the hardware could actually use the 900mhz broadband - or is it a pipe dream on my part that hopefully someone will release a ROM to access some previously hidden hardware?
I do recall with my Touch that there was a GPS built into the hardware that no-one was aware of for a year or two!
Click to expand...
Click to collapse
The hardware is definitely different...
JohnCody said:
The T9193 is an Australian phone made for Telstar (their cell phone company).
Click to expand...
Click to collapse
The Phone company in Australia is Telstra (just in case you are goggling it and wonder why you cant find it)
t9193 vodafone
i can use 900/2100 bands on t9193
i use Vodafone australia on Telstra hd2 with quick 3g data everywhere
what are the hardware differences?????
am i alone?
is there anyone else in this community that has
T9193 + Vodafone AUS + Custom ROM/Radio
Everyone keeps pasting crap about incompatibility but it seems to be fine
I've seen this blog.
http://blog.clove.co.uk/2011/04/12/samsung-galaxy-s-ii-umts-frequencies/
However, with our experience in the industry we have seen that almost every device launched in recent years within Europe has been ‘optimised’, with the American 850/1900 range locked down, leaving only 900/2100 for the rest of the world. As we are based in the UK it is for this reason we have taken the tentative step of advertising only these frequencies.
Click to expand...
Click to collapse
yeah, UK clove store said EU galaxy S2 doesn't support US 850/1900
network. (They said that may be US 850/1900 UMTS frequencies are locked.)
But, I find google news.
http://www.mydaily-gadget.com/news/5718-att-getting-samsung-galaxy-s2-gt-i9100-fcc-says-i-do
Speaking about release dates we do not have a specific one for the GT-i9100 in the USA but we can confirm the FFC has authorized the use of this particular smart phone on the 850MHz and 1900MHz GSM frequencies which means the first carrier to offer the Samsung Galaxy S II might be AT&T. These two frequencies account for the AT&T 3G network but they also match some Canada operator’s frequencies so there is a big chance the Galaxy S II will land there too in the near future.
Click to expand...
Click to collapse
Follow this news, EU galaxy S2 using US GSM 850/1900 networks.
Who is say that TRUE?
i'm very confused.
Quad band GSM 850/900/1800/1900
Source: http://www.samsung.com/global/microsite/galaxys2/html/specification.html
It should work.
apwhitelaw said:
Quad band GSM 850/900/1800/1900
Source: http://www.samsung.com/global/microsite/galaxys2/html/specification.html
It should work.
Click to expand...
Click to collapse
So, only using ATT GSM network?
ATT UMTS network can't use?
Pulverizer said:
I've seen this blog.
http://blog.clove.co.uk/2011/04/12/samsung-galaxy-s-ii-umts-frequencies/
yeah, UK clove store said EU galaxy S2 doesn't support US 850/1900
network. (They said that may be US 850/1900 UMTS frequencies are locked.)
But, I find google news.
http://www.mydaily-gadget.com/news/5718-att-getting-samsung-galaxy-s2-gt-i9100-fcc-says-i-do
Follow this news, EU galaxy S2 using US GSM 850/1900 networks.
Who is say that TRUE?
i'm very confused.
Click to expand...
Click to collapse
That first link (that I provided earlier tonight I think) - read it to the end please, Clove has all the info on that page, just finish reading it. sorry for the tone , but I think you did not pay enough attention - there are comments to that blog post that say clove confirmed with the manufacturer and local distributor that all 4 bands are present.
I'm confused here
I have SGSII ordered from Clove. I plan to use it with ATT sim card. Have I made a mistake? Will I be able to use it? Do I need to cancel?
I hope it works well with AT&T since I intend to get this phone.
My current (imported) GT-i9000 did not properly support AT&T and has very poor call quality and call drop issues.
Sent from my Xoom using XDA Premium App
Although Clove originally said they doubted it would support 850/1900 3G+, they did later confirm their stock would be quad-band 3G. So no need to worry about support for NAM 3G.
Once someone get's the GS2 in USA on ATT, can you confirm that it indeed works on Edge AND 3G?
kurtkbee said:
I hope it works well with AT&T since I intend to get this phone.
My current (imported) GT-i9000 did not properly support AT&T and has very poor call quality and call drop issues.
Sent from my Xoom using XDA Premium App
Click to expand...
Click to collapse
That's because the i9000 is only tri-band UMTS and only supports AT&T's 1900 frequency. When it gets to an area where the 1900 H/3G signal is weak, it can't switch over to the 850 UMTS simply because its hardware doesn't support it. So, then the phone call drops. You'll notice if you switch the i9000 to 2G/Edge, you'll never get a dropped call... because it's quad band GSM.
Also, ever notice you never get dropped calls when stationary and on H/3G? That's because with a solid 1900 UMTS signal, the i9000 will never search for the unsupported 850 band.
(And yes, I have confirmed all of this as I also own an i9000.)
i9100 supports quad-band UMTS with 850/1900 H/3G, so you will not have the frequent dropped calls anymore.
Here are the frequencies for AT&T: http://en.wikipedia.org/wiki/AT&T_Mobility#Radio_Frequency_Summary
Frequencies used on the AT&T Network
850 MHz GSM/GPRS/EDGE 2G
1900 MHz GSM/GPRS/EDGE 2G
850 MHz UMTS/HSPA 3G
1900 MHz UMTS/HSPA 3G
700 MHz LTE 4G
So, the i9100 International will do almost all. Except LTE.
pepemosca said:
Here are the frequencies for AT&T: http://en.wikipedia.org/wiki/AT&T_Mobility#Radio_Frequency_Summary
Frequencies used on the AT&T Network
850 MHz GSM/GPRS/EDGE 2G
1900 MHz GSM/GPRS/EDGE 2G
850 MHz UMTS/HSPA 3G
1900 MHz UMTS/HSPA 3G
700 MHz LTE 4G
So, the i9100 International will do almost all. Except LTE.
Click to expand...
Click to collapse
Thanks for your information.
Hello All,
I am on tmobile and had samsung galaxy s before i got SGS2 from at&t (my wife upgraded). i unlocked/rooted the phone after reading through the posts and it worked like a charm!
My concern right now is that I am always on edge data network with tmobile. can anyone help me on this. Tethering is also not much of use when i am on the slowest connection. Please help.
Can't do much about it since AT&T version doesn't support the 3g/4g band for T-mobile.
At&t gs2 doesn't support t-mobile frequency for 3 g.
Sent from my SAMSUNG-SGH-I777 using xda premium
I thought this phone has all the bands to support all networks.
parags1982 said:
I thought this phone has all the bands to support all networks.
Click to expand...
Click to collapse
No only AT&T.
My guess is that international version supports all the bands not the carrier branded sgII
^Even international version doesn't support T-Mobile 3g/4g (HSPA+) network.. Not many phones support their network. Or maybe it will.. but not everywhere
AT&T SGSII
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 850 / 1900 / 2100
T-Mobile SGSII
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 1700 / 2100
International SGSII
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 850 / 900 / 1900 / 2100
I am following another post that lets says HOW TO: "Enable 850Mhz 3G Network Frequency on your Samsung i9000 Galaxy S''. will update how it goes... fingers crossed..
parags1982 said:
I am following another post that lets says HOW TO: "Enable 850Mhz 3G Network Frequency on your Samsung i9000 Galaxy S''. will update how it goes... fingers crossed..
Click to expand...
Click to collapse
No luck. i read somewhere that i may need to install another modem?
Is there anyone out there with the same issue as mine?
any experts out there?
parags1982 said:
I thought this phone has all the bands to support all networks.
Click to expand...
Click to collapse
The AWS (1700) bands are supported only by a handful of carriers. It doesn't exist at all in Europe and Asia. There's little reason for manufacturers to include it on their global phones as so few people use it. It's the reason the T-Mobile SGS2 has a Qualcomm chip instead of Exynos like the rest of them. After the merger, it won't even exist in the U.S. any longer as AT&T plans on using it (1700) for LTE. If you want versatility and the ability to use unlocked phones, change to AT&T.
parags1982 said:
I am following another post that lets says HOW TO: "Enable 850Mhz 3G Network Frequency on your Samsung i9000 Galaxy S''. will update how it goes... fingers crossed..
Click to expand...
Click to collapse
In order to get T-mo 3G, a phone must support HSPA on 1700MHz AWS band, not 850MHz. As such, only phones from T-Mo or some Candadian carrier support 1700 band. Rest of the world use 900/2100 for 3G and AT&T uses 850/1900 for 3G/4G.
You are never going to get 3G on T-Mo on any phones from AT&T. Period. Give it up.
foxbat121 said:
In order to get T-mo 3G, a phone must support HSPA on 1700MHz AWS band, not 850MHz. As such, only phones from T-Mo or some Candadian carrier support 1700 band. Rest of the world use 900/2100 for 3G and AT&T uses 850/1900 for 3G/4G.
You are never going to get 3G on T-Mo on any phones from AT&T. Period. Give it up.
Click to expand...
Click to collapse
thanks. i give up
TMobile uses 1700 up, 2100 down. If the handset doesn't support 1700, you are out of luck.
Correct. Many phones support the 2100 MHz International band.
T-Mobile's network is weird though, and uses both 1700 and 2100 MHz at the same time.
My guess is that UMTS1700 support and not 42 Mbps HSPA+ is why the T-Mobile variant of the GS2 is such an oddball phone.
NO AT&T phone and only a small handful of international phones support T-Mobile's 1700 MHz band.
Similarly, only one or two T-Mobile phones (The Vibrant being one of them) support any of AT&T's 3G bands, but none support all of AT&T's 3G bands to my knowledge.
The interesting thing about this entire thing is that if you go into the modem band selection it lists 5 different wcdma bands including the aws 1700. I enabled those bands and tried using a tmo sim but alas it still only worked on edge. It may have just been there cosmetically rather then actually supporting aws bands. use dialer code *#2263# to access the band selection menu. Maybe there is a way to get it to work.
pb1866 said:
The interesting thing about this entire thing is that if you go into the modem band selection it lists 5 different wcdma bands including the aws 1700. I enabled those bands and tried using a tmo sim but alas it still only worked on edge. It may have just been there cosmetically rather then actually supporting aws bands. use dialer code *#2263# to access the band selection menu. Maybe there is a way to get it to work.
Click to expand...
Click to collapse
I agree with you and have tried exactly what you did (along with other bands) but still not working.
pb1866 said:
The interesting thing about this entire thing is that if you go into the modem band selection it lists 5 different wcdma bands including the aws 1700. I enabled those bands and tried using a tmo sim but alas it still only worked on edge. It may have just been there cosmetically rather then actually supporting aws bands. use dialer code *#2263# to access the band selection menu. Maybe there is a way to get it to work.
Click to expand...
Click to collapse
Typically, the s/w supports multiple versions of h/w. Just because an option's in the menu doesn't mean the h/w's available to support it. The same thing happened with the T-Mobile G2X. It was supposed to be quad-band, the option was in the ROM, but the radio wasn't there to support all the bands.
Title pretty much says it all. What's the real story on the the 3g frequencies? Nokia's site indicates it's quadband 3G, but yet many of the stores seem to indicate that it's tri-band for 3G. I would like to get one for use on ATT, but I definitely need 850MHz 3G since that is the predominant frequency in my area.
Anybody? What's the real answer on this?
bugsy said:
Anybody? What's the real answer on this?
Click to expand...
Click to collapse
From http://www.nokia.co.uk/gb-en/products/phone/lumia800/specifications/
GSM 850
GSM 900
GSM 1800
GSM 1900
WCDMA Band V (850)
WCDMA Band I (2100)
WCDMA Band II (1900)
WCDMA Band VIII (900)
Click to expand...
Click to collapse
From http://www.nokia.de/de-de/produkte/smartphones-und-handys/lumia800/technische-daten/
GSM 850-Netze
GSM 900-Netze
GSM 1800-Netze
GSM 1900-Netze
UMTS-Netze (WCDMA 900)
UMTS-Netze (WCDMA 1900)
Click to expand...
Click to collapse
From http://www.nokia.com/fi-fi/tuotteet/puhelimet/lumia800/tuoteseloste/
GSM 850
GSM 900
GSM 1800
GSM 1900
WCDMA Band V (850)
WCDMA Band I (2100)
WCDMA Band II (1900)
WCDMA Band VIII (900)
Click to expand...
Click to collapse
From http://www.nokia.se/hitta-produkter/produkter/nokia-lumia-800/specifications
GSM/EGSM 850/900/1800/1900;
WCDMA 850/900/1900/2100 I/II/V
Click to expand...
Click to collapse
WTF...
There must be an error on the German page
From Nokia Developer page:
http://www.developer.nokia.com/Devices/Device_specifications/Lumia_800/
Frequency Bands
GSM 1800
GSM 1900
GSM 850
GSM 900
WCDMA Band I (2100)
WCDMA Band II (1900)
WCDMA Band VIII (900)
This only adds to the confusion (No WCDMA 850)?
Thanks for the responses everyone. I think they just add to the confusion on what the real answer is, or Nokia is producing multiple models with different frequencies which I've seen referenced elsewhere.
I might just hold off for the 900 or wait until CES in January where they are supposed to make their big splash for the U.S. market. The render of the Lumia 900 that hit wmpoweruser today certainly looks nice if it's true. I wouldn't mind a slightly larger screen if it doesn't make the device too large. Some of the current phones border on mini-tablet size!
I know of two types of Lumia 800's and you can differentiate them via their FCC identification.
The European edition, FCC ID: LJPRM-801:
GSM/EGSM : 850/900/1800/1900
WCDMA : 900/1900/2100
The North American edition, FCC ID: ...RM-819:
GSM/EGSM : 850/900/1800/1900
WCDMA : 850/1900/2100
I really wish Nokia would fix the data on their web pages. I ran into this a few years ago with another phone I purchased from them where it was advertised as having U.S. bands when in fact it did not. Thanks for the info everyone.
Agree 100%. When i bought my phone, the lumia was advertised as:
WCDMA: 850/900/1900/2100
Many sellers have since correctly identified which bands the phone supports, but some still falsely advertise both 850 and 900 bands being on the phone.
When my Lumia 800 arrived and I could only get Edge/G service, I did some research and I was slightly disappointed. Luckily I work and live in a Wi-Fi zone, so that is my primary data connnection.
weetigo said:
Agree 100%. When i bought my phone, the lumia was advertised as:
WCDMA: 850/900/1900/2100
Many sellers have since correctly identified which bands the phone supports, but some still falsely advertise both 850 and 900 bands being on the phone.
When my Lumia 800 arrived and I could only get Edge/G service, I did some research and I was slightly disappointed. Luckily I work and live in a Wi-Fi zone, so that is my primary data connnection.
Click to expand...
Click to collapse
You too, huh? I was curious about Rogers. I find that 2G isn't the end of the world.. Only shortcoming are media rich sites, otherwise they still load up quickly for me.
The only thing I really would have missed on 3G is mapping and navigation, but the non-data GPS and preloaded map feature has completely eliminated that concern.
Rogers here in the 'Peg. I'm in love with it even though the primary service around my home is Edge/G. However, since I wrote that piece above, I grabbed the "Nokia Network Setup" application from the marketplace and now I can get 3G around my workplace.
Here is my situation at the moment. I'm currently in the US using At&t's network through straight talk. I purchased the Nokia Lumia 800 the UK version which is LJPRM-801. It clearly states that it supports WCDMA 900/1900/2100. Which I suppose are really meant for the UK or Europe. When I purchased the phone from the seller he clearly stated it was lock and he got it from Orange UK. Which I assume is locked as well. Surprisingly when I received the phone I inserted the Sim and it registered perfectly fine. I get voice AND data. I figured it may possibly be using the 1900 band for data. My main thoughts about this UK version is it may possibly have the 850 band included but not listed on the box for regulation concerns. How would I go about and truly testing it out if it does support 850 band?
You can't really, short of going to an area you know uses soley 850Mhz 3G, and not 1900 as well.
I dont see the reasoning behind manufacturing two different phones, My thoughts are they could have just disabled the band with a simple firmware. Has Anyone truly tested this? Any though on getting a different firmware version of the Lumia 800 on this UK version seeing if it would enable the 850 band.
Me too I purchased one from Clove.co.uk. On the box it stated 900/1900/2100 for 3G but I have 3G. Maybe I have a 1900Mhz station near my work. I will do more tests tonight.
Does an app exist to know the current band of 3G connection?
I've called Nokia while in Germany and they said that they only produced quad band Nokia lumia 800's
falconeight said:
I've called Nokia while in Germany and they said that they only produced quad band Nokia Lumia 800's
Click to expand...
Click to collapse
When you say quad band are you referring to 2g or 3g? because we know it's quadband 2g, but whether it's quadband 3g is the question.
So I have used it on 3 different locations here in Montreal on Rogers and I always got 3G. I don't know the band used by Rogers. I found several references but not definitive answer. I have the Lumia 800 Model 801.
totalfixation said:
When you say quad band are you referring to 2g or 3g? because we know it's quadband 2g, but whether it's quadband 3g is the question.
Click to expand...
Click to collapse
Both 2g and 3G
So you have the lumia 800 which has quad band 3g? If possible could you please post a picture of the lumia 800 box listing the quad 3G bands?
Sent from my Lumia 800 using XDA Windows Phone 7 App
kirdroid said:
So you have the lumia 800 which has quad band 3g? If possible could you please post a picture of the lumia 800 box listing the quad 3G bands?
Sent from my Lumia 800 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
I'm in Germany right now and don't have the box. I don't remember if it had the cell bands on the box. I know I got hspa on AT&T and I was happy.