Anyone know where I can get one for my sgh-i777?
Wanna be able to switch back and forth between phones.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Use the old SIM edge u cut it from lol or just slide it in I don't need adapters. Close this thread.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
fwdkiller said:
Use the old SIM edge u cut it from lol or just slide it in I don't need adapters. Close this thread.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
dumb reply. You need the new micro SIM with some carrier to be able to use the LTE network. And some phones need the adapter.
This one is 2$, I dont know if its reliable.
http://www.ebay.com/itm/Small-Mini-...292823?pt=PDA_Accessories&hash=item20c57d8bd7
Bagbug said:
dumb reply. You need the new micro SIM with some carrier to be able to use the LTE network. And some phones need the adapter.
This one is 2$, I dont know if its reliable.
http://www.ebay.com/itm/Small-Mini-...292823?pt=PDA_Accessories&hash=item20c57d8bd7
Click to expand...
Click to collapse
I know it uses micro sim i cut my sim card znd i use the outer shell after i cut it. If i want to use other phones. I normally just slide it in sim slot it works fine .
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
This is what u need u czn make one.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
fwdkiller said:
I know it uses micro sim i cut my sim card znd i use the outer shell after i cut it. If i want to use other phones. I normally just slide it in sim slot it works fine .
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
not all of us cut our Sim cards dude. some of us were given micro Sims from att. stop being a smartass.
OP, you can find adapters on Ebay or Amazon. i bought a Sim cutter that came with 4 adapters on Amazon for like 5 bucks.
Sent from my Galaxy S III
dLo GSR said:
not all of us cut our Sim cards dude. some of us were given micro Sims from att. stop being a smartass.
OP, you can find adapters on Ebay or Amazon. i bought a Sim cutter that came with 4 adapters on Amazon for like 5 bucks.
Sent from my Galaxy
Not trying to be an ass but the answer is eazy to find. Google it.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I did google it first. I did not find anything. It may be easy for you to find because you already know the answer. The phrases I choose to search with netted no results. BTW you were being an ass and you know it.
Thanks for all the other replies.
fwdkiller said:
This is what u need u czn make one.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
you really cant afford a 2$ (free shipping) adapter ???
Careful with adapters. Some of them are quite thick. Also sometimes they do get caught on the sim pins you try remove them. I use a thin piece of plastic or cardboard cut to the size of a sim for extraction. Slide it between the sim and the pins and pull both out. I have had the best luck using a punched full size sim as an adapter.
http://www.amazon.com/gp/aw/d/B003XCCYV0/ref=mp_s_a_1?qid=1342715600&sr=8-1
This one works great for me. Im able to switch back and forth to my mytouch 4g.
Sent from my SGH-T999 using XDA App
fwdkiller said:
Not trying to be an ass but the answer is eazy to find. Google it.
Click to expand...
Click to collapse
that right there is you being an ass.
gedster314 said:
Careful with adapters. Some of them are quite thick. Also sometimes they do get caught on the sim pins you try remove them. I use a thin piece of plastic or cardboard cut to the size of a sim for extraction. Slide it between the sim and the pins and pull both out. I have had the best luck using a punched full size sim as an adapter.
Click to expand...
Click to collapse
Bingo..
I'm so f**cking stupid. My Skyrocket S2 now unusable as phone. One of the PIN was broken when I remove the micro_SIM with adapter :crying:
gedster314 said:
Careful with adapters. Some of them are quite thick. Also sometimes they do get caught on the sim pins you try remove them. I use a thin piece of plastic or cardboard cut to the size of a sim for extraction. Slide it between the sim and the pins and pull both out. I have had the best luck using a punched full size sim as an adapter.
Click to expand...
Click to collapse
Those adapters suck it got stuck a few times on my 3gs iphone so be really careful.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Just slide the micro sim without adapter it works if u have nothing i use it on my nokia e71 straight talk phone all the time.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
I just got one of those cheap adapters and you can easily ruin your phone by tearing out the pins if you don't remove it carefully.
Also, you can stick the micro sim in there without an adapter and it holds pretty well, but it definitely could come loose. If you're just playing around this is the better thing to do over risking ruining your phone's SIM pins.
Sent from my SGH-T999 using Tapatalk 2
Related
Hi There,
Is there any way to replace it, the door/flap to the sd card/sim card? It's not quite broken but it wont stay closed anymore...meaning it is quite hard to use the phone without a protective case.
Newbieshwa said:
Hi There,
Is there any way to replace it, the door/flap to the sd card/sim card? It's not quite broken but it wont stay closed anymore...meaning it is quite hard to use the phone without a protective case.
Click to expand...
Click to collapse
here http://www.cellphone-repair-shop.com/motorola-cellphone-parts/
You'll find a cell phone parts store that sells razrs doors, batteries etcetera.
Sent from my XT910 using Tapatalk 2
I have some on hand. We can work on a price shipped.
what about just using a case that will cover the slot door?
Sent from my DROID RAZR using xda premium
Let me know
Sent from my XT910 using XDA
I just bought a Galaxy S3 and I'm looking to sell my Rezound + Accessories. How much do you think i could get for phone including these accessories?
HTC Rezound Phone
Three (3) Silicon Cases
One (1) Original Case with Kickstand
Two (2) Holsters for the cases (Phone Clips)
Two (2) Standard Battery Back Doors
Two (2) Extended Battery Back Doors
One (1) Extended Battery Silicon Case
One (1) Leather Case w/ wallet in the back w/ 2 credit card slots
Four (4) Standard Batteries
Two (2) Extended Batteries
Five (5) External Battery Chargers
One (1) Privacy Screen Protector
One (1) Regular Screen Protector
One (1) Home Charger
Two (2) USB Cables
One (1) Car Charger
One (1) Micro OTG Cable
One (1) Bluetooth Keyboard
One (1) Bluetooth Dongle
One (1) USB Extender
One (1) SD Card Reader
One (1) HDMI Cord (Hook up to TV)
One (1) USB 3-Hole Slots
One (1) Emergengy Battery Charger + Power adaptor
The items not shown but are included with the trade are an Otterbox Commuter Series Case and a HTC Rezound Multimedia Dock.
Below is a link to Pics of Everything.
https://www.dropbox.com/sh/dyiklakwnduduqx/gzfGpoEBP5
Dunno but a lot of people don't want all that.
Sent from my ADR6425LVW using xda premium
Would you sell seperate. I need a New standard batter door
Sent from my ADR6425LVW using Tapatalk 2
Accessorize much?
Sent from my ADR6425LVW using Tapatalk 2
1heffer said:
Accessorize much?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
yeah quite an addict. lol
emarietta said:
Would you sell seperate. I need a New standard batter door
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
sure for $10
what would you want for the 2 extended batteries and doors?
I'm interested in external battery charger and silicone case
Sent from my Transformer Prime TF201
jeez, what'd you take those pics with, a potato? lol looks like 1 megapixel
jayochs said:
jeez, what'd you take those pics with, a potato? lol looks like 1 megapixel
Click to expand...
Click to collapse
lol ipod touch 4th gen
06stang said:
I'm interested in external battery charger and silicone case
Sent from my Transformer Prime TF201
Click to expand...
Click to collapse
gtalk me.. [email protected]
piizzadude said:
what would you want for the 2 extended batteries and doors?
Click to expand...
Click to collapse
gtalk me.. [email protected]
kmundell14 said:
lol ipod touch 4th gen
Click to expand...
Click to collapse
So less than 1mp lol I just requested you on gtalk I'm interested in a standard battery
Sent from my ADR6425LVW using Tapatalk 2
Yeah really lol tons of accessories. If it was me I would just put it on eBay and see where the bids take me but thats just me!
JustinMy86 said:
Yeah really lol tons of accessories. If it was me I would just put it on eBay and see where the bids take me but thats just me!
Click to expand...
Click to collapse
just made the posting. lol
I am interested in the hdmi adapter and an extended battery silicone case. How much for those?
Thought you wanted to sell this all as a bundle lol. In this case.. How much for the external charger?
Sent from my ADR6425LVW using xda premium
kmundell14 said:
lol ipod touch 4th gen
Click to expand...
Click to collapse
so yeah, a potato
I can't see anyone in there right mind needing 6 batteries, multiple cases, battery covers,...ect. Seems a bit overkill in my opinion maybe if you don't like something (case) return it instead of buying a few more?
Budderz said:
I can't see anyone in there right mind needing 6 batteries, multiple cases, battery covers,...ect. Seems a bit overkill in my opinion maybe if you don't like something (case) return it instead of buying a few more?
Click to expand...
Click to collapse
Well that's the point of the thread. He doesn't need any of it anymore. Who cares? Buy something.
Sent from my ADR6425LVW using Tapatalk 2
Ok，I cut two squares out of the plastic to expose the charging contacts.
This is confusing, it looks clean though
sent from my Note 2
Looks like he cut two squares out of the plastic to expose the charging contacts. If anyone sells parts for these we could just buy the plastic from a variant that comes with access holes and put it on the Verizon version.
Sent from my SCH-I605 using xda app-developers app
Care to go into a lil more detail?
Sent from my SCH-I605 using xda app-developers app
mchlwvr614 said:
Looks like he cut two squares out of the plastic to expose the charging contacts. If anyone sells parts for these we could just buy the plastic from a variant that comes with access holes and put it on the Verizon version.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
The last person i recall trying to swap the rear frames ended up with no LTE and no wifi. :crying:
It looks strightforward, but i would definitely like some more detail from the OP.
Did you have to add an copper material to the charging contacts in order for them to make contact with the QI terminals?
Unless our phones differ then yes he added material I did a similar process works great
Any1 trying this you need to be very careful
Sent from my SCH-I605 using xda app-developers app
What did you add? It seems like it would be easier and safer to add a good bead of solder to each terminal on the QI piece. This way if you do make a mistake you're ruining the charging accessory and not the phone.
mchlwvr614 said:
Looks like he cut two squares out of the plastic to expose the charging contacts. If anyone sells parts for these we could just buy the plastic from a variant that comes with access holes and put it on the Verizon version.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
From my experience doing this via the copper tape method, he would've not only had to do this but attached the charging pins to the motherboard that are seen through the mid piece as well.
sent from my Note 2
LOL are you [email protected]#ing kidding me. Verizon blocked up the contacts with plastic on their version of the phone, but left the actual internals the same?
WHY.
"Herp derp here let's take this amazing internationally launched phone and derp it down to our herp level." Stupid [email protected]#ing morons.
Ye I dont get it is it just under all thi
s plastic thats in the back of my phone??
littleguevara said:
From my experience doing this via the copper tape method, he would've not only had to do this but attached the charging pins to the motherboard that are seen through the mid piece as well.
sent from my Note 2
Click to expand...
Click to collapse
Sure.
I solder two stock contacts on the motherboard.
And cut two square holes in the plastic frame.
Buy a N7100 QI wireless charging back cover.
With any QI standard charging pad.
RainmanX said:
Sure.
I solder two stock contacts on the motherboard.
And cut two square holes in the plastic frame.
Buy a N7100 QI wireless charging back cover.
With any QI standard charging pad.
Click to expand...
Click to collapse
Where'd you get these pins to solder to the motherboard?
Sent from my Nexus 7
I've also been wondering where one can get those pins. I've not had much luck sourcing them.
Ben
Lmao, seriously. Verizon provides good service only because they invested in lte instead of another technology, unlike the other carriers, and lte won. I don't even care that they put their name on everything.they can do whatever they want with that respect. But they make some stupid decisions sometimes..stupid for the consumer at least. I can't guess what they benefit from doing that
Sent from my SCH-I605 using XDA Premium App
I just did mine and I used the cintact ground tabs off a old laptop. Worked great. No issues at all just a little solder some wire and a dremmel. Im lovin it.
Sent from my SCH-I605 using xda app-developers app
littleguevara said:
Where'd you get these pins to solder to the motherboard?
Sent from my Nexus 7
Click to expand...
Click to collapse
I got those pins and QI charger from taobao.com, about $40.
Does the back cover for wireless charging sacrifice nfc functionality? Might have been why big red decided to not include it on our 605s... They try to do the thinking for us and protect us from ourselves
Props to whoever found the contacts on the board!
Sent from my SCH-I605 using Tapatalk 2
nrinzema said:
Does the back cover for wireless charging sacrifice nfc functionality? Might have been why big red decided to not include it on our 605s... They try to do the thinking for us and protect us from ourselves
Props to whoever found the contacts on the board!
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Don't even give them that kind of credit.
Everything on mine works
Sent from my SCH-I605 using xda app-developers app
My sim slot tray for the xzu is cracked ive noticed that my sim is not secure in there because my service will go out intermittently. I've looked on the Web but I'm not sure if they would work. any suggestions guys and ladies? The ones I've seen costs $10 plus shipping. That's crazy for a piece of plastic
Sent from my C6802 using xda app-developers app
HYE_TECH said:
My sim slot tray for the xzu is cracked ive noticed that my sim is not secure in there because my service will go out intermittently. I've looked on the Web but I'm not sure if they would work. any suggestions guys and ladies? The ones I've seen costs $10 plus shipping. That's crazy for a piece of plastic
Sent from my C6802 using xda app-developers app
Click to expand...
Click to collapse
I'd say that $10 sounds reasonable, as it is something not very common. If you had an iPhone or something more common, then I'd agree with you, but this is something that few enough people will buy to justify such a price.
http://www.meritline.com/usb-chargi...?hq_e=el&hq_m=2803082&hq_l=79&hq_v=47625619b2
I don't know anything about it. Just sharing.
Jack
Sent from my SM-N900P using XDA Premium 4 mobile app
midmadn said:
http://www.meritline.com/usb-chargi...?hq_e=el&hq_m=2803082&hq_l=79&hq_v=47625619b2
I don't know anything about it. Just sharing.
Jack
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's cheap enough. Only worried about whether it works with a case - both in fitment and whether the charging pin is long enough to plug in still with certain cases.
Good price but it's a cheap product from China that make me worried for my note 3.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
rEVOLVE said:
That's cheap enough. Only worried about whether it works with a case - both in fitment and whether the charging pin is long enough to plug in still with certain cases.
Click to expand...
Click to collapse
midmadn said:
http://www.meritline.com/usb-chargi...?hq_e=el&hq_m=2803082&hq_l=79&hq_v=47625619b2
I don't know anything about it. Just sharing.
Jack
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
nmhung100 said:
Good price but it's a cheap product from China that make me worried for my note 3.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just FYI, I ordered this product 2-3 weeks ago and recieved it yesterday, works great!
Krazyzzz said:
Found the same charger with lower $5.98 price:
Click to expand...
Click to collapse
That one's smaller, not designed for the Note 3, connector is also the old USB 2.0 design
That cheaper plug still works (N2 plugs, etc still work on N3 just not USB3)
However, thats making the phone stand up on its own weight almost & is puttting more stress on the plug then there really should be (hence the cheapness, bad not thought out design) I actually had a iphone 5 dock from china that I got for $4 the lightning plug snapped off from the phones free standing weight.
Ive owned those cheapy chinese docks for other phones, and...Honestly NOT worth the money even at that price. Finding one that has actual support behind the phone would be better...
nxneko said:
That cheaper plug still works (N2 plugs, etc still work on N3 just not USB3)
However, thats making the phone stand up on its own weight almost & is puttting more stress on the plug then there really should be (hence the cheapness, bad not thought out design) I actually had a iphone 5 dock from china that I got for $4 the lightning plug snapped off from the phones free standing weight.
Ive owned those cheapy chinese docks for other phones, and...Honestly NOT worth the money even at that price. Finding one that has actual support behind the phone would be better...
Click to expand...
Click to collapse
Not sure which one you have but the one posted here has back support. I use a Ringke Slim Case which perfectly snugs in the dock.
EDIT: I however just tried using my spigen bounce case and it wouldn't fit Good thing I stop using that case.
ukic said:
Not sure which one you have but the one posted here has back support. I use a Ringke Slim Case which perfectly snugs in the dock.
EDIT: I however just tried using my spigen bounce case and it wouldn't fit Good thing I stop using that case.
Click to expand...
Click to collapse
Use it without case and see what happens supportwise
Sent from my SM-N9005 using Tapatalk
nxneko said:
Use it without case and see what happens supportwise
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Yep I see what your saying but I don't remove my case while charging. It works perfect for me with the kind of case I use. To each their own.
ukic said:
Yep I see what your saying but I don't remove my case while charging. It works perfect for me with the kind of case I use. To each their own.
Click to expand...
Click to collapse
Yeah going with naked phone with cheap docks are scary
:cyclops:
Just ordered mine. Pretty cheap, even if I end up not using it like most of my gadget accesories.