Related
Hello,
Has anyone tried the Body Glove case?
http://www.bodyglove.com/store/products_detail.php?product_id=30716&zip=19116&Go.x=15&Go.y=13&Go=Go
It's $30, but do you guys think it's worth it?
this case can be found easily on ebay for 17.99 with free shipping
ill let everyone know what its like when i get it
sooperxtool said:
this case can be found easily on ebay for 17.99 with free shipping
ill let everyone know what its like when i get it
Click to expand...
Click to collapse
Wouldnt that case cover the proximity sensor???
I have been using it for about 1.5 weeks with my Tmob TP2. The bottom cover is a little tricky, but it works pretty good. I took the back clip off and put the plug in. I mainly keep it in my shirt or my pants pocket.
Got one today
I got one today and is does seem pretty sturdy. It has the feeling of soft leather or neoprene over hard plastic covering most of the edges and then a mesh on the sides for griping. as one person mentioned you have have the clip on or off which is nice. It does seem really bulky when I have it clipped in the inside of my front jeans pocket. I'm still trying to decide if I want to keep it or get something else but I do think it is pretty nice.
1buprofen
bimori said:
Wouldnt that case cover the proximity sensor???
Click to expand...
Click to collapse
It looks like it will, so a little drilling might be required. I have one coming in the mail, so I'll let you know if it does.
I saw this case at my local T-Mobile store. It was too bulky and interfered too much with the number keys when the screen was flipped up. T-Mobile sales a really nice soft gel like shell with all the right holes cut out for the T-Mobile version of the TP2 (including one for the proximity sensor). It costs about $12 +/-.
sooperxtool said:
this case can be found easily on ebay for 17.99 with free shipping
ill let everyone know what its like when i get it
Click to expand...
Click to collapse
Best part it's in NJ, very close to me
When you say "It was too bulky and interfered too much with the number keys when the screen was flipped up" do you mean its got a cover that protects the screen too?
Yes. It's the same type as the BodyGlove, but without the clip, feels more rubbery, and isn't quite as thick. It still gets in the way of the number keys when tilting the screen, but not as much since it's a little thinner. I can actually still use the number keys with this case, where as with the bodyglove I couldn't.
DeDBlanK said:
I have been using it for about 1.5 weeks with my Tmob TP2. The bottom cover is a little tricky, but it works pretty good. I took the back clip off and put the plug in. I mainly keep it in my shirt or my pants pocket.
Click to expand...
Click to collapse
You will def have to drill a little for the proximity sensor, but other than that, it fits really well, and gives a little better grip. It does make the phone a little thicker, but it protects it well.
dasher said:
I saw this case at my local T-Mobile store. It was too bulky and interfered too much with the number keys when the screen was flipped up. T-Mobile sales a really nice soft gel like shell with all the right holes cut out for the T-Mobile version of the TP2 (including one for the proximity sensor). It costs about $12 +/-.
Click to expand...
Click to collapse
Is this the soft gel case that the T-Mobile store sells?
http://cgi.ebay.com/for-HTC-TOUCH-PRO2-GSM-T-MOBILE-OEM-GEL-SKIN-CASE_W0QQitemZ350242545193QQcmdZViewItemQQptZPDA_Accessories?hash=item518c151e29&_trksid=p3286.c0.m14
If not, have you seen it sold anywhere online?
Yes, that's the one.
I just bought the t-mobile soft gel case for my touch pro 2 and it fits pretty well, Doesn't block the proximity sensor. So for the price , 12.99 + tax, I recomend it.
Glad it worked out for you. I've had the case for over a week now and love it!
Updated BodyGlove Case Coming Soon!
I have been working with BodyGlove on a redesign of the TP2 case and I will be getting a factory prototype in the next week to ten days. From what I am told the main difference is it will have the cutout for the proximity sensor.
Make sure you keep your receipt. I would guess that T-Mobile will replace it with the updated version since the original was technically defective. If you have trouble with T-Mo then contact BodyGlove directly since they know about the problem and are coming out with a fix.
As for the thinner GEL type case, I tried it today and didn't like it as much as the BG version since it seemed to be easy to dislodge the the lower shell middle clips. Within a few minutes I noticed that I had to bump the center clips back in place more than once. It also seemed to interfere with the slide a little, something the BG does not do.
I would have to vote for the BG (updated one) as the better case since the rigid shell fits and stays on better. Yes, the BG is a little bulkier but I would have to guess that it would provide pretty good protection in the event of gravity assisted boo-boo.
Regards,
Gordo
Body Glove in a cradle.
I love my BG case. I got it a couple of days ago. All I had to do was drill a small hole for the proximity sensor, which btw is an easy fix. I wonder if there is a cradle that will fit it now that it's a lot thicker.
I think I'd have a better luck making my own. I think a triangular wedge with a lip/edge on one the sides would work best since I'm planning to have the keyboard open while it's charging. I'll post pics (probably on a different thread). What do you guys think?
jetjockgordo said:
I have been working with BodyGlove on a redesign of the TP2 case and I will be getting a factory prototype in the next week to ten days. From what I am told the main difference is it will have the cutout for the proximity sensor.
Make sure you keep your receipt. I would guess that T-Mobile will replace it with the updated version since the original was technically defective. If you have trouble with T-Mo then contact BodyGlove directly since they know about the problem and are coming out with a fix.
As for the thinner GEL type case, I tried it today and didn't like it as much as the BG version since it seemed to be easy to dislodge the the lower shell middle clips. Within a few minutes I noticed that I had to bump the center clips back in place more than once. It also seemed to interfere with the slide a little, something the BG does not do.
I would have to vote for the BG (updated one) as the better case since the rigid shell fits and stays on better. Yes, the BG is a little bulkier but I would have to guess that it would provide pretty good protection in the event of gravity assisted boo-boo.
Regards,
Gordo
Click to expand...
Click to collapse
็็ำัHey there!
Don't forget to put the new one on eBay with WORLDWIDE SHIPPING !!!
(or at least Australia)
Cheers!
jetjockgordo said:
I have been working with BodyGlove on a redesign of the TP2 case and I will be getting a factory prototype in the next week to ten days. From what I am told the main difference is it will have the cutout for the proximity sensor.
Make sure you keep your receipt. I would guess that T-Mobile will replace it with the updated version since the original was technically defective. If you have trouble with T-Mo then contact BodyGlove directly since they know about the problem and are coming out with a fix.
Regards,
Gordo
Click to expand...
Click to collapse
I emailed BG about this the other day and they couldn't tell if this was a mistake, a bad batch, or what... so they said they would send me a new one to see if it was better (this was before i saw your thread).
Also, there is a hole on the BACK cover that the BG case blocks, but the gel of same type don't. Someone said it was a noise mic. (I don't know).
For those of you that drilled... was it hard to keep the material from wanting to tear or fray? How did you go about it?
etro
etropic said:
I emailed BG about this the other day and they couldn't tell if this was a mistake, a bad batch, or what... so they said they would send me a new one to see if it was better (this was before i saw your thread).
Also, there is a hole on the BACK cover that the BG case blocks, but the gel of same type don't. Someone said it was a noise mic. (I don't know).
For those of you that drilled... was it hard to keep the material from wanting to tear or fray? How did you go about it?
etro
Click to expand...
Click to collapse
It wasn't hard at all. I just got a small drillbit and I used a dremel tool. You can't even tell that I "modified" it.
This is my first review, so I hope it doesn't suck.
Both my wife and I have the Tilt 2. I decided to go with InvisibleShield while she wanted a case. After looking at all the comments here about cases not fitting, I decided to go with 2 different ones from Amazon. One fit horribly, so i wont even mention it.
She is using the Tilt2 Praetorian Slip and she loves it. Installation was a little tough as the fit is pretty precise. I suggest installing the top (screen) side first and then the bottom (keyboard). Install both with the KB extended. I have attached pics of the fit.
The only complaint I have (she thinks of it as a feature) is that the cover makes it a little more difficult to slide out the keyboard. She like it because it used to slide open in her purse (mostly because of the fact that she keeps it in an inside pocket of her purse which causes it to hit just right against crap she has in another pocket). Overall, this is a pretty nice cover. I am sure you can get it cheaper than amazon, but I had gift certificates to spend
Hope this helps!
Thanks for the review! I bought the same case a few months ago, although it was advertised as for the Verizon Touch Pro 2. I was unaware they made one for the Tilt 2. Now I won't have to worry about it falling off randomly!
thsi case probably wouldnt work with invisible shield on too huh
Doinshots said:
This is my first review, so I hope it doesn't suck.
Both my wife and I have the Tilt 2. I decided to go with InvisibleShield while she wanted a case. After looking at all the comments here about cases not fitting, I decided to go with 2 different ones from Amazon. One fit horribly, so i wont even mention it.
She is using the Tilt2 Praetorian Slip and she loves it. Installation was a little tough as the fit is pretty precise. I suggest installing the top (screen) side first and then the bottom (keyboard). Install both with the KB extended. I have attached pics of the fit.
The only complaint I have (she thinks of it as a feature) is that the cover makes it a little more difficult to slide out the keyboard. She like it because it used to slide open in her purse (mostly because of the fact that she keeps it in an inside pocket of her purse which causes it to hit just right against crap she has in another pocket). Overall, this is a pretty nice cover. I am sure you can get it cheaper than amazon, but I had gift certificates to spend
Hope this helps!
Click to expand...
Click to collapse
Neat.. glad yours fit. I ordered one for the Tilt2 from Amazon as well, and Boxwave sent one labeled 'Touch Pro 2'. I see yours doesn't have a cutout area for the PTT button either, do you have issues with that? My praetorian case would almost always trigger the PTT button whenever I handled the phone.
The top/screen portion of my Praetorian didn't fit right and opening and closing the top was almost impossible - even ended up ripping off the protective plastic along one side of the keyboard. (the protective plastic that is designed to be there, not the temporary stuff it whipped with) I can see just by looking at your pictures that your screen portion fits waay better than mine did.
When I contacted Boxwave about the issues, no questions asked and they sent a postage paid label for the return. I'd love to try this case again, as I did like the feel of it, but nervous about another no-fit. I went with BodyGuardz instead.. not sure I'm happy with those..
Thanks,
I´ll include it on the main thread
http://forum.xda-developers.com/showthread.php?t=524059
JJHiemenz said:
Neat.. glad yours fit. I ordered one for the Tilt2 from Amazon as well, and Boxwave sent one labeled 'Touch Pro 2'. I see yours doesn't have a cutout area for the PTT button either, do you have issues with that? My praetorian case would almost always trigger the PTT button whenever I handled the phone.
The top/screen portion of my Praetorian didn't fit right and opening and closing the top was almost impossible - even ended up ripping off the protective plastic along one side of the keyboard. (the protective plastic that is designed to be there, not the temporary stuff it whipped with) I can see just by looking at your pictures that your screen portion fits waay better than mine did.
When I contacted Boxwave about the issues, no questions asked and they sent a postage paid label for the return. I'd love to try this case again, as I did like the feel of it, but nervous about another no-fit. I went with BodyGuardz instead.. not sure I'm happy with those..
Click to expand...
Click to collapse
Man, sorry you had so many issues. The PTT button is indeed covered, but she has had no issues with it at all (hers is remapped to toggle bluetooth on and off). The fit on the screen portion is *very* tight. Took some effort to get it installed properly.
Also, mine definitely said "Tilt 2" on the packaging.
It is disappointing that it covers the PTT button. I assume your wife has abandoned that function (easily switching BT on/off)?
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
sleze said:
It is disappointing that it covers the PTT button. I assume your wife has abandoned that function (easily switching BT on/off)?
Click to expand...
Click to collapse
Nope, the PTT button still works perfectly under the cover. Does not get accidentally pressed and is responsive when you push it.
azwildcat98 said:
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
Click to expand...
Click to collapse
Sounds like skinning/shielding your phone with GadgetShieldz might be the way to go. The GadgetShieldz does take a little time to install but it works. The protective film on the screen is easy to install and bubble free. It makes the phone non-slippery. It would not protect the phone like a case but it does prevent scratches. When installed, it adds very little weight and dimension to the phone.
Actually, there are other protective films/shields but I only have experience with GadgetShieldZ. It might work for you.
Boxwave Praetorian Crystal Slip for Tilt 2
orb3000 said:
Thanks,
I´ll include it on the main thread
http://forum.xda-developers.com/showthread.php?t=524059
Click to expand...
Click to collapse
Just to report on this, I got one of these in the mail yesterday. So far I love it. It wasn't terribly difficult to get on. It fits very well too. My only real complaint is that it doesn't accommodate the PTT button that the Tilt 2 has right next to the volume buttons. It's not a big issue since I don't use PTT and the case doesn't prohibit using the key anyway.
Just be careful and make sure you order the one that specifically says it's for the Tilt 2. They make other models. I know they have the Praetorian on eBay but to be safe I opted to get mine directly from Boxwave. I got what I ordered too and could have used they're return policy if I needed.
Oh...I'll be happy to post pics if anyone wants but I think someone already put some up of this one a Tilt2.
azwildcat98 said:
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
Click to expand...
Click to collapse
I wish I'd seen your post sooner! Home Depot and Lowe's does indeed have something like that. I'm sure lots of hardware stores do. It's called Plasti-Dip. I have a can right here You can buy it as spray-on or dip/brush-on applications. I use it on mountain bike parts and tools for extra grip. I'm not positive how well it will stick to a slick plastic surface but it is an option.
BluEyedTiger said:
Just to report on this, I got one of these in the mail yesterday. So far I love it. It wasn't terribly difficult to get on. It fits very well too. My only real complaint is that it doesn't accommodate the PTT button that the Tilt 2 has right next to the volume buttons. It's not a big issue since I don't use PTT and the case doesn't prohibit using the key anyway.
Just be careful and make sure you order the one that specifically says it's for the Tilt 2. They make other models. I know they have the Praetorian on eBay but to be safe I opted to get mine directly from Boxwave. I got what I ordered too and could have used they're return policy if I needed.
Oh...I'll be happy to post pics if anyone wants but I think someone already put some up of this one a Tilt2.
Click to expand...
Click to collapse
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
BehindTheLight said:
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
Click to expand...
Click to collapse
I ordered one from BoxWave and I think I'm still going to shop around for something else. It seems like the Tilt2 has less options than the other variations of the Rhodium so people may just be settling for this due to "Slim Pickin's."
I like the way the gel gives more texture and grip to the phone, but I still feel uneasy because it's definitely not a snug fit. The part that covers the screen section of the phone is very flimsy and after you get it on, you want to keep checking it to make sure that it is attached; it feels like it can easily slip off at any time. This is specifically evident when you slide your screen up and tilt it. Tap the top right, or the middle section that really has no grip around the phone, and it might just pop off...
I still have it on my phone because it is the lesser of two evils, have something vs. not having something, but are there any other options for the Tilt2?
BehindTheLight said:
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
Click to expand...
Click to collapse
It's held up quiet nice...even with as much flashing I do (have to remove the bottom piece every time). I've figured out a great way to put it back on that's really fast and easy. Some people say it's difficult to get on. I think the top piece is the hard part but I've taken it off a few times and have no issues there either. It still fits good. If I remember, next time I take it off I'll shoot some pics of how I put it on and upload them.
Learic said:
I ordered one from BoxWave and I think I'm still going to shop around for something else. It seems like the Tilt2 has less options than the other variations of the Rhodium so people may just be settling for this due to "Slim Pickin's."
I like the way the gel gives more texture and grip to the phone, but I still feel uneasy because it's definitely not a snug fit. The part that covers the screen section of the phone is very flimsy and after you get it on, you want to keep checking it to make sure that it is attached; it feels like it can easily slip off at any time. This is specifically evident when you slide your screen up and tilt it. Tap the top right, or the middle section that really has no grip around the phone, and it might just pop off...
I still have it on my phone because it is the lesser of two evils, have something vs. not having something, but are there any other options for the Tilt2?
Click to expand...
Click to collapse
I haven't really had any trouble with mine popping off. It took a bit to get the top on right and it was a pretty snug fit too. Getting the corner edges all the way tucked under was the hardest part. I'm guessing it's a manufacturing thing. Some say it's a tight fit and other say it's loose. I will agree that the sides on the top piece are flimsy because they're not attached the the phone but if they were it would probably make matters worse by either rubbing against the bottom piece or creating too big of a gap between the two parts of the phone.
I agree there aren't many options for the Tilt 2 and I hate to say it but there probably won't be.
BluEyedTiger said:
I haven't really had any trouble with mine popping off. It took a bit to get the top on right and it was a pretty snug fit too. Getting the corner edges all the way tucked under was the hardest part. I'm guessing it's a manufacturing thing. Some say it's a tight fit and other say it's loose. I will agree that the sides on the top piece are flimsy because they're not attached the the phone but if they were it would probably make matters worse by either rubbing against the bottom piece or creating too big of a gap between the two parts of the phone.
I agree there aren't many options for the Tilt 2 and I hate to say it but there probably won't be.
Click to expand...
Click to collapse
If yours is a snug fit, I wonder if we received the same thing! Did you order from BoxWave? I have a little plastic tool that I used to get the corners onto the top half quickly which was actually made to fit into the creavice of a HTC Dash phone to pop the clips and take the phone apart. It works great and I can see the little flaps around the corner so you can tell the corners of the phone are between the gel lips.. It's still too easy to come off though..
Even though my receipt says "Praetorian Crystal Slip, HTC Tilt2, Smoke Grey - SKU: bw-268-3729-2808", it also says "ITEM: HTC TOUCH PRO2." The Box also has a white sticker in the top right that says "Praetorian Crystal Slip - TOUCH PRO2."
Do you remember if yours said the same? Maybe they somehow shipped me the wrong one?
Learic said:
If yours is a snug fit, I wonder if we received the same thing! Did you order from BoxWave? I have a little plastic tool that I used to get the corners onto the top half quickly which was actually made to fit into the creavice of a HTC Dash phone to pop the clips and take the phone apart. It works great and I can see the little flaps around the corner so you can tell the corners of the phone are between the gel lips.. It's still too easy to come off though..
Even though my receipt says "Praetorian Crystal Slip, HTC Tilt2, Smoke Grey - SKU: bw-268-3729-2808", it also says "ITEM: HTC TOUCH PRO2." The Box also has a white sticker in the top right that says "Praetorian Crystal Slip - TOUCH PRO2."
Do you remember if yours said the same? Maybe they somehow shipped me the wrong one?
Click to expand...
Click to collapse
Yeah I got mine directly from boxwave. They have like 3 different models of that slip. Most of the adds I saw on Amazon and eBay claimed it would fit on 3 or 4 different TP2 models which I knew it wouldn't. I emailed boxwave about the pics in their online catalog because it didn't look like a Tilt 2 to me and they admitted it wasn't. They said they didn't have one for the pics. Which made sense I mean why spend that much just to get pics but they promised it would fit so I figured what the hell. The hard covers kinda suck.
Thanks for the replies, I guess I will go ahead and order it and see what happens.
I just got the unbranded version of this case off ebay (the seller's id was e-story).
It's not too bad on my unbranded TP2. It's slightly more difficult to slide out the keyboard, and when the screen is fully tilted, the top row of keys are slightly obscured, but nothing too major in my opinion.
I like that the case improves the grip of the phone, but I'm also rather concerned that the case will eventually melt under hotter conditions since the material feels rather gummy.
Looking for something to protect the body/mid-frame of my note 3, since the S-view case leaves it somewhat exposed. i've seen pictures of similar on the web - but cant find any to buy.
anyone using something like that? any ideas?
in need of one also.
Hi I am in need of this also. Don't want a case as it makes the phone bulky but want to protect the sides for when I have it stood up in car etc. My old s3 sides got scratched before and don't want this happening to my note 3. I need like a skin sticker around the edges. Pw did you find any or if anyone knows of any please
anyone using something like that? any ideas?
Thanks Azz
Slickwraps? Make sure you get the full body one. I ordered the back only expecting it to come with the sides also, it didn't.
http://www.gadgetshieldz.com/samsung-galaxy-note-3-screen-protectors-cases-covers-skins.html
^ front, back, sides.
the only one i found.
Or get an aluminum bumper..
DAvid_B said:
Or get an aluminum bumper..
Click to expand...
Click to collapse
i've had those on other phones, and they were all terrible.
these stickers work with S-view cases, which was my concern - i wanted the parts the case didnt cover, protected.
since I am not a fan of s-view cover ( though I bought one ), I always use one of these;
http://www.ebay.com.au/itm/Combo-Si...AU_MobilePhoneAccessories&hash=item5afa1182e4
Daily Drive
http://www.ebay.com.au/itm/Tough-De...bilePhoneAccessories&var=&hash=item4acd903cff
So I wasn't too big of a fan of the Midnight Blue color, but it was the only color available from T-Mobile, so I went with it. I purchased a white back cover from ebay and this is how I swapped it out.
Link to back purchased:
http://www.ebay.com/itm/261685948756?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
First is the replacement cover itself. It comes with adhesive already applied and a blue cover to be removed before sticking on.
To take the cover off the Nexus 6 I used a dull razor blade, as it was the only thing I could find that wold fit between the back cover and the metal housing. I stuck it in the bottom corner because I thought it would make it easier to peel up. I also put a piece of electrical tape at the point where the razor would touch the metal housing to avoid chipping the metal.
WARNING!!!! There is a ribbon next to the power and volume buttons that will pull up with the cover when removing make sure to use your finger to hold it down as you pull on the cover. Take your time.
Peel off protective cover of new back and stick on . Pretty simple.
Finished.
I do like it wayyyy better than the midnight blue back color. The blue was too boring for me and I am actually liking the 3 tone with white,black and blue. However, once they release the housing I will replace with the housing shipped on the Cloud White model to get rid of the blue. Also remember cloud white is slightly off white so don't a bright white. And thanks to ifixit for the instructions for removing back cover.
And FYI, the white cover has the same texture as the blue. It is also a fingerprint magnet as well, but less visible in most lighting due to the color.
Nice, thanks for sharing. Pics r a little small but still helpful.
Sent from my Nexus 6 using Tapatalk
Does it feel like factory? I received an RMA'd Nexus 6 (on my third one) and it's perfect--except there are lots of scuffs on the back. :\ I don't want to have to return it and get another dud if this works and looks stock.
natezire71 said:
Does it feel like factory? I received an RMA'd Nexus 6 (on my third one) and it's perfect--except there are lots of scuffs on the back. :\ I don't want to have to return it and get another dud if this works and looks stock.
Click to expand...
Click to collapse
It feels just like factory. I'm honestly not sure if it is factory but it is identical to the stock and a perfect fit.
bigmike2424 said:
It feels just like factory. I'm honestly not sure if it is factory but it is identical to the stock and a perfect fit.
Click to expand...
Click to collapse
Could I get a link to the page you ordered from? I want to make sure it has the adhesive installed.
natezire71 said:
Could I get a link to the page you ordered from? I want to make sure it has the adhesive installed.
Click to expand...
Click to collapse
http://www.ebay.com/itm/261685948756?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Nice, thanks for the write up, especially the part about the ribbon cable. I ordered a new one on Dec 1 but the tracking hasn't updated since the 4th so who knows when I'll get it.
Edit - Looks like it showed up in Chicago today. Maybe tomorrow I'll have it.
---------- Post added at 08:28 AM ---------- Previous post was at 08:26 AM ----------
natezire71 said:
Does it feel like factory? I received an RMA'd Nexus 6 (on my third one) and it's perfect--except there are lots of scuffs on the back. :\ I don't want to have to return it and get another dud if this works and looks stock.
Click to expand...
Click to collapse
This is why I got a new one. My new Nexus 6 from Sprint came with a few of those scuffs on the back almost like they used the phone as a hockey puck and slid it across the floor before packaging it or something. Nothing I have done has created anything like those scuffs so I am not sure what these phones went through during assembly. I knew the back covers would be cheap since there isn't even an NFC tag or anything attached to them.
Is it possible to still stick the old back on the phone after removing it or will the adhesive not be strong enough to stick? I was thinking about getting a white for fun to see if I like it.
Pilz said:
Is it possible to still stick the old back on the phone after removing it or will the adhesive not be strong enough to stick? I was thinking about getting a white for fun to see if I like it.
Click to expand...
Click to collapse
The adhesive seems strong enough on the original cover to reapply. I even put the protective layer that cane with the new back on the old one.
bigmike2424 said:
The adhesive seems strong enough on the original cover to reapply. I even put the protective layer that cane with the new back on the old one.
Click to expand...
Click to collapse
That's good news, it looks like I'm ordering one, I may get a blue one and 'texturize' it and then install it.
Pilz said:
That's good news, it looks like I'm ordering one, I may get a blue one and 'texturize' it and then install it.
Click to expand...
Click to collapse
i was thinking of picking one up, to see what/how i can paint it black (and look good) while adding texture. Let me know if you have any ideas on how you are going to do this!
Thanks. That's good to know because I'm sure I will be replacing it at some point (I have no case and the back cover will surely get scratched up at the minimal contact point)
PaisanNYC said:
i was thinking of picking one up, to see what/how i can paint it black (and look good) while adding texture. Let me know if you have any ideas on how you are going to do this!
Click to expand...
Click to collapse
There's a rubber paint that I saw at home depot for random stuff like painting your rims and dumb things and its made by krylon if I recall correctly. There is also a sand textured paint for outdoor decor which looked interesting. I'll have to see which one I want before I buy the back.
Pilz said:
There's a rubber paint that I saw at home depot for random stuff like painting your rims and dumb things and its made by krylon if I recall correctly. There is also a sand textured paint for outdoor decor which looked interesting. I'll have to see which one I want before I buy the back.
Click to expand...
Click to collapse
PlastiDip
Pliind said:
PlastiDip
Click to expand...
Click to collapse
Someone tried that with the dbrand skin and it started to flake after a couple of days.
Pliind said:
PlastiDip
Click to expand...
Click to collapse
I have to agree, PlastiDip doesn't work well for something being handled as much as a phone, even if you sandpaper the item for better adhesion before painting
How long did the back cover take to arrive at your doorstep? It'd be nice to do the conversion before I head off for vacation in a week or so from now.
radeonboy said:
How long did the back cover take to arrive at your doorstep? It'd be nice to do the conversion before I head off for vacation in a week or so from now.
Click to expand...
Click to collapse
Shipping from NJ only took 3 days to get to me in Texas.
Thanks for this. Just ordered one!
does anyone know if replacing the white back with one of these blue ones will void any kind of warranty?
I bought this white back for the phone to see what i could do with it. I took the letters off because they were not stuck on there good. They came off with a dust can.
Decided to paint it a sliver color to match the frame as close as possible. I hand painted the inside of the letters black. I don't know what to do about the "M" yet, if i'm going to put one on there or not. Maybe something else, idk.
This is what I have so far. It looks like it has a brushed look to it. After I painted it, I scuffed it with a dish scrubber to give it that look.
Last thing I do, will be spray a satin clear.
That thread title though.
Looks good.
I thought I was on p&*#hub for a second...
EmperorX said:
I thought I was on p&*#hub for a second...
Click to expand...
Click to collapse
lol
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
dcemtp1 said:
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
Click to expand...
Click to collapse
I'm going to see how this one holds up first. I have some ideas for other covers lol
just cleared it a bit ago. ended up using a matte clear. just going to let it dry really good and maybe polish it a lil before installing it.
looks pretty good
Would be nice to see it on your phone!
I like it
I just got around to installing it.
pics
Looks great
albert1500 said:
I just got around to installing it.
pics
Click to expand...
Click to collapse
I'd buy one from you if you decide to sell it
Definitely a cool option to have something unique like that.
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
literadesign said:
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I used rust-o-leum paint and clear. I'm not worried about the bending. I'm taking this one off in the next few days.
I started another one with a different silver. I wont be reusing the current one.
FYI they make paint for plastic (bendable) it's mostly for bumpers on cars
I took the cover off earlier and the paint held up very well, i didnt bend the cover a whole lot to begin... i wasnt going to use it again so i decided it to test how much bend it would take and i had to bend it a lot in order for the paint to wrinkle.
I tried doing something similar for my daughter that got bored by the same old phone sleeve/case that was partially clearly transparent and partially frosted look.
I decided to paint the frosted part using RAL 9005 matte black spray paint. I haven't clear coated it yet as it was just an experiment. If it turns out to be ok I may coast it using some not so rigid coat to avoid cracking due to the rubbery nature of this sleeve.
She likes the end result. Me too. Unfortunately I'm not able to add images to my posts (haven't posted enough posts to XDA - apparently)
images.tapatalk-cdn.com/15/04/23/2214dce5a324e57d152757f716f672b9.jpg
Sent from my Galaxy Nexus using Tapatalk
How did you stick the back cover back on?
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
lotus49 said:
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
Click to expand...
Click to collapse
Uuhm... i had thought the idea of seeing more than one back cover in some of the more recent photo's would have indicated it... but also in the first post he says he bought a white back cover a while ago to see what he could do with it. He didn't remove and replace the same back cover. Pretty sure that's NOT possible due to the adhesive... or at least risks the ability to put it back on firmly and smoothly.