I tried to install SiyahKernel on my Samsung Galaxy S3 and followed the instructions below. But when I reboot my phone, I'm stuck at the welcoming screen! What should I do? How do I fix this?
3. FLASHING A ROM, RADIO OR KERNEL VIA CWM TOUCH RECOVERY
a. Download your chosen Rom, Radio or Kernel from the Development Forum, then make sure your phone is booted up as normal and connect your usb cable so it goes into MTP Mode. Copy the .zip file (DO NOT UNZIP IT FIRST) to the 'Internal Storage' part on your phone. Do not copy it to a Sub Directory as it will be harder to find when flashing it.
b. Enter CWM Touch Recovery (shut down the phone then hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds).
c. Select 'Install zip from sdcard' and select 'choose zip from sdcard' if the file is on Internal Memory.
d. Scroll to your zip file and select. Then select 'Yes' in the list to start flashing.
e. When flashing is finished press the BACK Button to go back until you get to the Main Menu and then select 'reboot system now' to reboot your phone into Android.
Click to expand...
Click to collapse
Try flashing Siyahkernel through Odin instead of CWM.
Please make sure the following two points are given:
- are you really on the international S3 with the model number i9300, not the US-version or korean version?
- Are you on Stock ROM or any given Ice-Cream-Sandwich ROM. Jellybean does not work.
If it still does not work, flash the original ROM again. You can get it at samfirmware.com
That will replace everything including the kernel, but not cause data loss. Make sure you flash the same or a higher build, not an older version.
Flash the kernel using Odin.
Otherwise, flash a whole rom.
start trying to flash kernel made for S3 and not for S2!
Actually, there is NO siyah flashable zip for S3...
Mopral said:
start trying to flash kernel made for S3 and not for S2!
Actually, there is NO siyah flashable zip for S3...
Click to expand...
Click to collapse
What are you talking about?
http://www.gokhanmoral.com/gm/2012/07/18/siyahkernel-s2-v3-4/
What's the second link on that page?
_neutron_ said:
What are you talking about?
http://www.gokhanmoral.com/gm/2012/07/18/siyahkernel-s2-v3-4/
What's the second link on that page?
Click to expand...
Click to collapse
This kernel is for SGS2
Just read the ****ing name and the ****ing changelog!!!!!!
Mopral said:
This kernel is for SGS2
Just read the ****ing name and the ****ing changelog!!!!!!
Click to expand...
Click to collapse
Calm down...that was the wrong link...how's about this one...
http://www.gokhanmoral.com/gm/2012/06/16/siyahkernel-s3-v1-1/
Just to prove you wrong of course...
_neutron_ said:
Calm down...that was the wrong link...how's about this one...
http://www.gokhanmoral.com/gm/2012/06/16/siyahkernel-s3-v1-1/
Just to prove you wrong of course...
Click to expand...
Click to collapse
Try to download it and you will see...
Gokan has removed ALL cwm flashable zip for S3 because someone brick his phone trying to flash it on the wrong phone
same happened with me when I did the same with my S2. here's the solution for S2 and is kind of similar to S3 too.. actually quite same. You just need to download the S3 ROM from sammobile.com. Full process here: http://bit.ly/KKhJni
theonlyanil said:
same happened with me when I did the same with my S2. here's the solution for S2 and is kind of similar to S3 too.. actually quite same. You just need to download the S3 ROM from sammobile.com. Full process here: http://bit.ly/KKhJni
Click to expand...
Click to collapse
I've downloaded the S3 ROM from Sammobile, but when I try to install it with Odin, I get stuck at "Get PIT for mapping". What to do?
I'm running siyah kernel on my s3 and it sounds like either an issue with the driver or the com port it's on I had the same problem I changed the com port of android modem I think the device is called to a higher number phone flashes anything and everything from odin now
Sent from my GT-I9300 using xda premium
Rankiz said:
I've downloaded the S3 ROM from Sammobile, but when I try to install it with Odin, I get stuck at "Get PIT for mapping". What to do?
Click to expand...
Click to collapse
First: the pit file from the link you quote is not made for S3 so do not use it!!!
Second: you should not need to use pit file
Then:
-restart your phone in Download mode
-open Odin and select your rom as PDA
-be sure that "repartition" is not checked
-connect your phone to your computer
-once Odin has recognized your S3, just hit the start button in Odin
theonlyanil said:
same happened with me when I did the same with my S2. here's the solution for S2 and is kind of similar to S3 too.. actually quite same. You just need to download the S3 ROM from sammobile.com. Full process here: http://bit.ly/KKhJni
Click to expand...
Click to collapse
Mopral said:
First: the pit file from the link you quote is not made for S3 so do not use it!!!
Second: you should not need to use pit file
Then:
-restart your phone in Download mode
-open Odin and select your rom as PDA
-be sure that "repartition" is not checked
-connect your phone to your computer
-once Odin has recognized your S3, just hit the start button in Odin
Click to expand...
Click to collapse
I am still stopped at "Get PIT for mapping" :S
Rankiz said:
I am still stopped at "Get PIT for mapping" :S
Click to expand...
Click to collapse
Retry but this time use this pit file and check "repartition"
Mopral said:
Retry but this time use this pit file and check "repartition"
Click to expand...
Click to collapse
I love you! It worked! So now I have a new installation of ICS 4.0.4 on my phone.
I have the TAR file for the Siyahkernel for Odin, how should I proceed to install this? Just start phone in download mode and install with Odin?
Rankiz said:
I love you! It worked! So now I have a new installation of ICS 4.0.4 on my phone.
I have the TAR file for the Siyahkernel for Odin, how should I proceed to install this? Just start phone in download mode and install with Odin?
Click to expand...
Click to collapse
Be sure it is the one for S3 (it should be 1.3.8a) then use it as PDA with odin
Do not use pit file and do not check "repartition"
Mopral said:
Retry but this time use this pit file and check "repartition"
Click to expand...
Click to collapse
Mopral said:
Be sure it is the one for S3 (it should be 1.3.8a) then use it as PDA with odin
Do not use pit file and do not check "repartition"
Click to expand...
Click to collapse
Omg, not strange my phone got bricked, I used the one for S2 last time, and in addition I installed it using ClockWork Mod, lol.
I will update on how this goes, found the 1.3.8.a Odin version for S3 now.
Congrats. You finally got .PIT ... Thanks Mopral
galaxy s3 won't boot
Mopral said:
Retry but this time use this pit file and check "repartition"
Click to expand...
Click to collapse
hi i have different probem my s3 is stcuk on first logo when u boot don't go further its not entering in recovery mode after i last time done wipe data / factory reset. now it enter in download mode but not in recovery mode. odin tried but error says no partition, tried different partition now it says set partition on top where com no is displayed. but in message it says
ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
and its here from last few hours. any idea what i need to do and what files i need. i have i9300 uk based h3g network. thank you
---------- Post added at 09:28 PM ---------- Previous post was at 08:50 PM ----------
Mopral said:
Be sure it is the one for S3 (it should be 1.3.8a) then use it as PDA with odin
Do not use pit file and do not check "repartition"
Click to expand...
Click to collapse
hi i have different probem my s3 is stcuk on first logo when u boot don't go further its not entering in recovery mode after i last time done wipe data / factory reset. now it enter in download mode but not in recovery mode. odin tried but error says no partition, tried different partition now it says set partition on top where com no is displayed. but in message it says
ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
and its here from last few hours. any idea what i need to do and what files i need. i have i9300 uk based h3g network. thank you
PIT Stuck
Mopral said:
Retry but this time use this pit file and check "repartition"
Click to expand...
Click to collapse
Hi,
I downloaded the PIT file but it doesnt go beyond "Get PIT for mapping.."
Samsung Galaxy S3 - GT-I9300
I9300GSMH
Please HELP!!
Thank you,
Deep Doshi
Related
"NAND WRITE START!" from Odin when trying to flash a Brand new S3 i9300.Problem from the box.
No service centre here.
Thanks
Why is it so hard to post in the right section for some? You drive in the opposite lane with you care also? "didn't bother looking for signs or search for other cars so sorry daaah"
Sent from my GT-I9300 using xda premium
Stop ****ing around with it! If you don't know what your doing....don't do it! Seriously man.....
Sent from my GT-I9300 using xda premium
Noted, After opening the box ,the client wanted latest whatsapp plus a new dialup pad app.After that handset hung and rebooted in samsung i9300 only.Download mode ok but same error.
I find it really helpful of you all to just yell at someone who is trying to find an answer. I have the same problem, and I am not inexperienced with flashing phones. The question still remains: Can there be something done via Odin or adb or whatever or is it a case for repair.
I would really, really appreciate to get some useful answers. I can **** myself I don't need others to do this.
Thanks in advance.
EDIT: I have found a solution thanks to a very helpful friend who found the relevant post here on xda (http://forum.xda-developers.com/showpost.php?p=27995287&postcount=16). You need to flash a 3-file stock rom via Odin v3.0.4 with mx.pit-file and repartition ticked. This worked for me and I very much hope that it also works for everyone else.
With all the pit files, i m getting there is no pit file.I m still looking for 3 files firmware.
Can someone post me a link for a 3 files pda phone and csc for S3.All the files i ve found are single file.
Thanks
The only 3 part files and pit for the Samsung range have in the past been posted on Sammobile.com .You will have to look and see if they post such for SGS3 . Never seen them on XDA and 3 part files posted on XDA have in the past been from sammobile .
jje
Here's the link to a 3-file firmware:
https://hotfile.com/dl/156320160/eb4a939/I9300XXALE8_I9300OJVALE7_OJV.zip.html
Here's the one from SamMobile for the pit-files:
http://www.mediafire.com/?ddfpfkk2pb8326k
And here's the post who helped me:
http://forum.xda-developers.com/showpost.php?p=27995287&postcount=16
from this thread:
http://forum.xda-developers.com/showthread.php?t=1737996&page=2
To all the others: This is what help looks like, and don't forget you were all in these same shoes once.
zimbardo.ea said:
Here's the link to a 3-file firmware:
https://hotfile.com/dl/156320160/eb4a939/I9300XXALE8_I9300OJVALE7_OJV.zip.html
Here's the one from SamMobile for the pit-files:
http://www.mediafire.com/?ddfpfkk2pb8326k
And here's the post who helped me:
http://forum.xda-developers.com/showpost.php?p=27995287&postcount=16
from this thread:
http://forum.xda-developers.com/showthread.php?t=1737996&page=2
To all the others: This is what help looks like, and don't forget you were all in these same shoes once.
Click to expand...
Click to collapse
All your work and not one bloody thanks, come on people, thank the woman!!
zimbardo.ea said:
Here's the link to a 3-file firmware:
https://hotfile.com/dl/156320160/eb4a939/I9300XXALE8_I9300OJVALE7_OJV.zip.html
Here's the one from SamMobile for the pit-files:
http://www.mediafire.com/?ddfpfkk2pb8326k
And here's the post who helped me:
http://forum.xda-developers.com/showpost.php?p=27995287&postcount=16
from this thread:
http://forum.xda-developers.com/showthread.php?t=1737996&page=2
To all the others: This is what help looks like, and don't forget you were all in these same shoes once.
Click to expand...
Click to collapse
Man, you are so wonderful, will post result.Done or not, you are a time saver.
Thanks ......Thanks
History of the device.
Brand New from the Box,The owner went to google-play(market) and downloaded 2 apps.One of them whatsapp.The phone froze and rebooted and Stuck at Startup Logo.
Update:Using the 3 Files firmware.
1= With pit file:
added
enter CS for MD5
check md5..Do not unplug the cable..
please wait..
CODE_I9300XXALEF_....
MODEM_I9300XXLEF_REV...
CSC_OXE_I9300XEALE4_...
Checking MD5 finished Successfully..
Leave CS..
Odin v.3 engine (ID:31)
FILE ANALYSIS...
Setupconnection..
Initialzation..
Set Pit file..
DO NOT TURN OFF TARGET!!
Re-Partition operation failed.
Added!!
All threat completed.(succeed 0/failed 1)
---------------------------------------------
2= Without Pit File
added
enter CS for MD5
check md5..Do not unplug the cable..
please wait..
CODE_I9300XXALEF_....
MODEM_I9300XXLEF_REV...
CSC_OXE_I9300XEALE4_...
Checking MD5 finished Successfully..
Leave CS..
Odin v.3 engine (ID:31)
FILE ANALYSIS...
Setupconnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
sboot.bin
NAND Write Start!!
param.bin
tz.img
boot.img
Complete(Write)operation failed.
Added!!
All threat completed.(succeed 0/failed 1)
----------------------------------------
The Only File which can be loaded SUCCESSFULLY and Odin can give PASS is GT-I9300_Boot_Recovery.tar, But device will reset and back in Download mode.
Ps: All types of Single files could not be loaded
Only Download Mode available,Phone cannot enter Recovery mode
All Kernels and recovery tars cant cant fully be loaded,Odin will stop and FAILED
Different types of Odin tried,including 3.04
==========================================
No Service centre in this Country,So,will just keep it till Solution Comes.
blaiseid said:
History of the device.
Brand New from the Box,The owner went to google-play(market) and downloaded 2 apps.One of them whatsapp.The phone froze and rebooted and Stuck at Startup Logo.
Update:Using the 3 Files firmware.
1= With pit file:
added
enter CS for MD5
check md5..Do not unplug the cable..
please wait..
CODE_I9300XXALEF_....
MODEM_I9300XXLEF_REV...
CSC_OXE_I9300XEALE4_...
Checking MD5 finished Successfully..
Leave CS..
Odin v.3 engine (ID:31)
FILE ANALYSIS...
Setupconnection..
Initialzation..
Set Pit file..
DO NOT TURN OFF TARGET!!
Re-Partition operation failed.
Added!!
All threat completed.(succeed 0/failed 1)
---------------------------------------------
2= Without Pit File
added
enter CS for MD5
check md5..Do not unplug the cable..
please wait..
CODE_I9300XXALEF_....
MODEM_I9300XXLEF_REV...
CSC_OXE_I9300XEALE4_...
Checking MD5 finished Successfully..
Leave CS..
Odin v.3 engine (ID:31)
FILE ANALYSIS...
Setupconnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
sboot.bin
NAND Write Start!!
param.bin
tz.img
boot.img
Complete(Write)operation failed.
Added!!
All threat completed.(succeed 0/failed 1)
----------------------------------------
The Only File which can be loaded SUCCESSFULLY and Odin can give PASS is GT-I9300_Boot_Recovery.tar, But device will reset and back in Download mode.
Ps: All types of Single files could not be loaded
Only Download Mode available,Phone cannot enter Recovery mode
All Kernels and recovery tars cant cant fully be loaded,Odin will stop and FAILED
Different types of Odin tried,including 3.04
==========================================
No Service centre in this Country,So,will just keep it till Solution Comes.
Click to expand...
Click to collapse
Which pit-file did you use? The mx.pit file? It worked with this one only. I'm sorry that my help didn't solve your issues
i tried all pit files including the mx one with no luck.
blaiseid said:
i tried all pit files including the mx one with no luck.
Click to expand...
Click to collapse
just use (mx.pit) file in 10 seconds your smartphone is back
treskilos said:
just use (mx.pit) file in 10 seconds your smartphone is back
Click to expand...
Click to collapse
I had my phone bricked, could enter only in download mode, nothing more, tons of failed installations in Odin
Well, after flashing ONLY the mx.pit File, i was able to flash then the custom recovery and even a single PDA firmware file
THANKSSSS!
treskilos said:
just use (mx.pit) file in 10 seconds your smartphone is back
Click to expand...
Click to collapse
OMG THANK YOU....I almost got a heart attack ^^
I confirm using the mx.pit file with odin worked...could boot to recovery and flash a rom from sd.
Thanks again
Can someone help me please?
As i said in the previous post i managed to get to the recovery menu and flash a custom rom but whenever i try to reflash the stock with odin it stucks at NAND Writing!
I don't know what to do i tried everything...other version of odin other usb, installed kies again ect....
I'm on Android Revolution HD right now....my phone is a Samsung Galaxy S III GT-I9300...i really wound like to be able to flash the stock rom is there a way to install it from the CWR and if yes will i be able to install CWR after?
edit: also i forgot to add i have siyah kernel 1.8.9 and previously installed the siyah recovery menu from the foxhound 2.2 rom..i'm on CWR now tho...
zeroblu3 said:
Can someone help me please?
As i said in the previous post i managed to get to the recovery menu and flash a custom rom but whenever i try to reflash the stock with odin it stucks at NAND Writing!
I don't know what to do i tried everything...other version of odin other usb, installed kies again ect....
I'm on Android Revolution HD right now....my phone is a Samsung Galaxy S III GT-I9300...i really wound like to be able to flash the stock rom is there a way to install it from the CWR and if yes will i be able to install CWR after?
edit: also i forgot to add i have siyah kernel 1.8.9 and previously installed the siyah recovery menu from the foxhound 2.2 rom..i'm on CWR now tho...
Click to expand...
Click to collapse
Go to recovery and then mounts and storage.
Format system, data and cache. Also do a factory wipe on the first cwm page.
After that pull battery wait 5 seconds abs reinsert it.
Hold power home and vol down to go to download mode. Then press the up arrow.
Then plug it in to computer. In odin select pda csc and modem or if it's a one file firmware just select it in pda. Do not tick repart or select a pit file.
Then hit start.
Drew071
Sent from my GT-I9300 using xda app-developers app
drew071 said:
Go to recovery and then mounts and storage.
Format system, data and cache. Also do a factory wipe on the first cwm page.
After that pull battery wait 5 seconds abs reinsert it.
Hold power home and vol down to go to download mode. Then press the up arrow.
Then plug it in to computer. In odin select pda csc and modem or if it's a one file firmware just select it in pda. Do not tick repart or select a pit file.
Then hit start.
Drew071
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
OMG this actually worked...
So here is what i did...step by step...
1. Uninstalled Kies but did keep the USB drivers..
2. Made a Nandroid backup in CWM and followed Drew071's instruction and removed the ext_sd card...i actually did that before but without the pull battery step...
3. Used Odin 3.07 with only auto reboot and f. time reset ticked and loaded the stock rom that i took from sammobile in PDA...
5. Flashed as usual O_O....
I really don't know what it was but it scared the s..t out of me ^^
I'll try to root the stock FW now with the usual odin method and let you know if it works...thx all for your support
EDIT: Ok so i used CF-Auto-Root-m0-m0xx-gti9300 with Odin v3.07....all went well and i'm a happy root user again ^^
Hi all, My S3 GT-I9300 international edition, bought on Amazon from some German place, orignal stock Samsung no mods went into a boot loop Xmas day (yeah, what a present!).
I could then go into recovery mode and cleared the cache. Still boot loop AND I could NO LONGER get to recovery mode, but can get into Download Mode just fine. So there is hope...
I read this tread http://forum.xda-developers.com/showthread.php?t=1457458
I am hoping this is the way to go for me. Experts may comment, please.
I am looking for kernel AND pit files. Where can i get them?
I tried using Siyah-s2-v5.0.1 but do not have a PIT file for it.
When I try to use it heimdall says I do not have the right PIT file:
"
Beginning session...
Session begun with device of type: 131072
Downloading device's PIT file...
PIT file download sucessful
ERROR: Partition corresponding to -kernel argument could not be located
"
I am on OS X with heimdall working fine.
Please help if you can and know more.
thank you so much
E
Using this rom:
I9300XXELL4_I9300O2UELL1_I9300BWELK1_HOME
and the Siyah-s2-v5.0.1 kernel, I can do:
heimdall flash --primary-boot boot.img --verbose
OK
heimdall flash --recovery recovery.img --verbose
OK
but nothing else. I cannot do:
heimdall flash --kernel zImage --verbose
it says:
ERROR: Partition corresponding to -kernel argument could not be located
Boot loop is flash stock rom via Odin.
Stay away from pit files .
jje
Sent from my GT-N8013 using xda premium
culurciello said:
Using this rom:
I9300XXELL4_I9300O2UELL1_I9300BWELK1_HOME
and the Siyah-s2-v5.0.1 kernel,
Click to expand...
Click to collapse
Why are you using siyah s2 kernel if you have an s3 maybe thats the reason you got into bootloop
Sent from my GT-I9300 using xda premium
LOL
1. download an stock rom from www.samfirmware.com
2. dont make the same mistake as you did with before download a SIII rom instead of an SII rom...
3. Use ODIN to flash to a stockrom AND NEVER FLASH .PIT FILES with ODIN unless YOU reallyyy need it.
4. now keep it or move to a custom ROM for the SIII and not SII AKA S2
and for the rest i wish you an merry christmas and a early happy new year
haydar100 said:
and for the rest i wish you an merry christmas and a early happy new year
Click to expand...
Click to collapse
thank you and you too!
I am on with Odin now and this guide:
widefide.com/mobile/galaxy-s3-boot-problem-solution
I think I need a PIT file because of the errors:
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried the pit file here
widefide.com/mobile/galaxy-s3-boot-problem-solution
and the stock rom :
I9300XXALE8_I9300O2UALE5_I9300BWLE5_HOME.tar.md5
still nothing I cannot seem to get Pit partitioning to work
PS. Yes I did make a huge mistake with the S2 kernel... how silly!
Service Centre required before you totally destroy the phone .
jje
phone is already dead due to component problem: Samsung KMVTU000LM eMMC(16GB)+MDDR(64MB) NAND Flash
see thread here:
on: forum.xda-developers: showthread.php?t=1993044
CASE CLOSED
thank you all for your help
took me 3 days to figure all of this out...
Hello, so this is what happened i saw a rom From http://forum.xda-developers.com/show....php?t=2154790
After that i got to 80% then it failed on Odin now i'm stuck on a Odin Mode (NOT Download mode)
Odin sees my phone kies does not
My phone info
Samsung note 1 (SHV-E160L) Korean version (has been rooted)
Any Help guides is help full By the way is this fixable?? i hope its not bricked i only got it 5~6 weeks ago
i also got a video on youtube with my problem Please help!
/watch?v=JWr67N122r8&feature=youtu.be
Adam1337 said:
Hello, so this is what happened i saw a rom From http://forum.xda-developers.com/show....php?t=2154790
After that i got to 80% then it failed on Odin now i'm stuck on a Odin Mode (NOT Download mode)
Odin sees my phone kies does not
My phone info
Samsung note 1 (SHV-E160L) Korean version (has been rooted)
Any Help guides is help full By the way is this fixable?? i hope its not bricked i only got it 5~6 weeks ago
i also got a video on youtube with my problem Please help!
/watch?v=JWr67N122r8&feature=youtu.be
Click to expand...
Click to collapse
posted link is not working remove your battery and connect it to pc and do the three button combo to get the odin mode and flash your original stock firmware first
sangalaxy said:
posted link is not working remove your battery and connect it to pc and do the three button combo to get the odin mode and flash your original stock firmware first
Click to expand...
Click to collapse
Try this link http://www.youtube.com/watch?v=JWr67N122r8
i try it came up with the same screen flash it failed
Adam1337 said:
Try this link http://www.youtube.com/watch?v=JWr67N122r8
i try it came up with the same screen flash it failed
Click to expand...
Click to collapse
is your odin still able to recoganise the devise and which firmware are you using to flash
sangalaxy said:
is your odin still able to recoganise the devise and which firmware are you using to flash
Click to expand...
Click to collapse
Odin is still able to find my phone. the firmware i use is stock rom ( HOME_E160L.UH24.1821_CL966093_REV02_user_low_ship.tar )
From http://www.general-files.org/downlo...821_CL966093_REV02_user_low_ship.tar.md5.html
Kies can't find my phone so recovery is not a option
Adam1337 said:
Odin is still able to find my phone. the firmware i use is stock rom ( HOME_E160L.UH24.1821_CL966093_REV02_user_low_ship.tar )
From http://www.general-files.org/downlo...821_CL966093_REV02_user_low_ship.tar.md5.html
Kies can't find my phone so recovery is not a option
Click to expand...
Click to collapse
maybe the firmware is the problem try flashing another and use the latest odin for flashing
http://samsung-updates.com/device/?id=SHV-E160L
http://www.sammobile.com/firmwares/1/?model=SHV-E160L&pcode=LGT#firmware
try using any of these
sangalaxy said:
maybe the firmware is the problem try flashing another and use the latest odin for flashing
http://samsung-updates.com/device/?id=SHV-E160L
http://www.sammobile.com/firmwares/1/?model=SHV-E160L&pcode=LGT#firmware
try using any of these
Click to expand...
Click to collapse
i downloaded it tried with the latest odin3 didn't work
Adam1337 said:
i downloaded it tried with the latest odin3 didn't work
Click to expand...
Click to collapse
on the first post u said that you flashed a rom may I know which one was it and please give me a link to it the link is not working
sangalaxy said:
on the first post u said that you flashed a rom may I know which one was it and please give me a link to it the link is not working
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2154790
Adam1337 said:
http://forum.xda-developers.com/showthread.php?t=2154790
Click to expand...
Click to collapse
did you followed the exact guide please try one more time correctly
may be something with that rom
and use odin 3.07
sangalaxy said:
did you followed the exact guide please try one more time correctly
may be something with that rom
and use odin 3.07
Click to expand...
Click to collapse
this is the part i did
Recommended Steps For Flashing.
Put phone into download mode
In odin select Your valila copy of the kies update and put in PDA option box
then select the posted TWRP and put in phone.
click start to flash and watch the progress,
AS SOON AS IT finishes the flash with writing the second recovery image hold down VOL UP AND VOL DOWN for the reboot, the device is now in recovery with twrp
you can either do adb sideload (choose advansed on main menu) to apply the patch or adb push and place on the sd-card (Note in recovery the phones internal memory is /emmc and the sd-card is /sd-card , so it you dont have a sd-card inserted you must use adb push filename.zip /emmc/)
once the file is sideloaded ( or installed via twrp install menu option for adb push users)
then do a factory reset once more.
Enjoy your Cherry ROM
Cherry Rom Single Download Link updated 26/may/2013
Adam1337 said:
this is the part i did
Recommended Steps For Flashing.
Put phone into download mode
In odin select Your valila copy of the kies update and put in PDA option box
then select the posted TWRP and put in phone.
click start to flash and watch the progress,
AS SOON AS IT finishes the flash with writing the second recovery image hold down VOL UP AND VOL DOWN for the reboot, the device is now in recovery with twrp
you can either do adb sideload (choose advansed on main menu) to apply the patch or adb push and place on the sd-card (Note in recovery the phones internal memory is /emmc and the sd-card is /sd-card , so it you dont have a sd-card inserted you must use adb push filename.zip /emmc/)
once the file is sideloaded ( or installed via twrp install menu option for adb push users)
then do a factory reset once more.
Enjoy your Cherry ROM
Cherry Rom Single Download Link updated 26/may/2013
Click to expand...
Click to collapse
yeah am saying try again with odin 3.07 and post a ss
sangalaxy said:
yeah am saying try again with odin 3.07 and post a ss
Click to expand...
Click to collapse
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Adam1337 said:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
i have some problem too, help me pls
Solution
Adam1337 said:
Hello, so this is what happened i saw a rom From http://forum.xda-developers.com/show....php?t=2154790
After that i got to 80% then it failed on Odin now i'm stuck on a Odin Mode (NOT Download mode)
Odin sees my phone kies does not
My phone info
Samsung note 1 (SHV-E160L) Korean version (has been rooted)
Any Help guides is help full By the way is this fixable?? i hope its not bricked i only got it 5~6 weeks ago
i also got a video on youtube with my problem Please help!
/watch?v=JWr67N122r8&feature=youtu.be
Click to expand...
Click to collapse
My Dear Friend Just Install a Recovery Like CWM OR TWRP
Your Problem Will Be Solved
[solved]How To Root Samsung Galaxy Note SHV-E160L (New Method)
Basic Requirements:
Samsung Galaxy Note (SHV-E160L)
Computer
USB data Cable
Phone Charger (You won’t expect your phone to die of the battery during rooting)
Now we move on to our step by step procedure. (Do follow each and every step and read them carefully to avoid any problem for which we will not be responsible.)
Root Samsung SHV-E160L
Procedure To Root Samsung Galaxy Note
1. First you have to download all the drivers for Samsung SH-E160L on your Computer.
2. The second and most important thing to do is, enabling USB debugging. For this, you will find Developer options in your Settings option and then Enable USB Debugging.
Developer Options
In Android 4.2.2 the Developer mode is hidden and to unhide it, go to Settings and then in about option go to System Information. Inside this, you will find Software information, and then there you will see “More” option, inside which you will get Build Number. Tap on this option for 5-8 times and then a message will appear, “You are now a Developer” which means that the developer option is now shown under your settings option that was earlier not present.
3. Now the next step is to download vRoot(search in google and download) and install it on your Computer.
4. Now open vRoot and then mount your Samsung Galaxy Note to your computer through a USB cable.
5. The vRoot will automatically search for your smartphone once its connected to your computer and it will automatically detect when your phone is attached.
6. Now, click on your phone name in vRoot and in the next window that appears, you will see a root button. Just, click on it.
7. The vRoot software will automatically start rooting the phone and will automatically install SuperSU app in it.
8. Now you have Successfully Rooted your Samsung Galaxy Note SHV-E160L. To verify that you have successfully rooted your phone, go to your menu and then search for SuperUser app. If you found that app then it means the device is successfully rooted and if not, then please repeat the process carefully.
Note: Your Manufacturer Warranty gets Void when you root your phone. It means that they will charge you for any damage that you cause to your device. So proceed after making your mind and making clear of what are you doing. WE ARE NOT RESPONSIBLE FOR ANY DAMAGE THAT YOU CAUSE TO YOUR DEVICE DURING ROOTING.
If for any reason you want to Rollback all you have done, then go to Play Store and just Download SuperSU (ChainFire) and install it. After installation, open the app, move to Settings and then select Full Unroot. Your device will be brought back to the earlier stage.
My Mum's Ace GT-S5839i seems to be stuck in a bootloop after it froze when she was playing a game.
I've been trying to recover it using Odin, but I'm not having any luck. These are the steps I tried:
-Downloaded Odin v3.09
-Downloaded the stock firmware (from Sammobile.com)
-Opened Odin
-Put phone into Download Mode
-Connected phone
-Press AP, and selected the firmware file
-Press start
It then fails. This is the message list:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iXXLK2_S5839iH3GLC2_S5839iNELK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any suggestions as to what I should try? I've never used Odin before, so I'm unsure of what to do.
Thanks
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
go to this link for odin 1.87.
https://www.google.co.in/url?sa=t&r...aU2OI67Ynp8O_Ms0b-WWQ&bvm=bv.1355534169,d.bmk
go to this link for stock rom.
www.mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2.zip
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
go to this link for odin 1.87.
https://www.google.co.in/url?sa=t&r...aU2OI67Ynp8O_Ms0b-WWQ&bvm=bv.1355534169,d.bmk
go to this link for stock rom.
www.mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2.zip
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the reply. I've got a couple of questions, though.
Firstly, it's a GT-S5839i, not a 5830i, so I assume I can't use the 5380i ROM in the link you posted?
Secondly, does it specifically have to be Odin V1.85? I was using the latest version (V3.09)
Thanks.
Egg Chaser said:
Thanks for the reply. I've got a couple of questions, though.
Firstly, it's a GT-S5839i, not a 5830i, so I assume I can't use the 5380i ROM in the link you posted?
Secondly, does it specifically have to be Odin V1.85? I was using the latest version (V3.09)
Thanks.
Click to expand...
Click to collapse
U can flash s5830i roms on your device also.. And use 1.87 for that link rom which i given
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
U can flash s5830i roms on your device also.. And use 1.87 for that link rom which i given
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Ok, I've followed all of the instructions you've posted, but it's still stick on a bootloop.
Any suggestions?
Egg Chaser said:
Ok, I've followed all of the instructions you've posted, but it's still stick on a bootloop.
Any suggestions?
Click to expand...
Click to collapse
Do a "Wipe data/ factory reset" from the stock recovery mod and reboot. That should solve it. Hope I Helped
mahithm said:
Do a "Wipe data/ factory reset" from the stock recovery mod and reboot. That should solve it. Hope I Helped
Click to expand...
Click to collapse
For some reason, after running Odin, the phone would say "E:failed to mount /data (invalid argument). After a bit of researching I found some different files that seemed to work. Not sure what the difference was, but they did the trick.
Thanks for pointing me in the right way, though. I've never had to recover a phone before, so I really appreciate the help.
Egg Chaser said:
For some reason, after running Odin, the phone would say "E:failed to mount /data (invalid argument). After a bit of researching I found some different files that seemed to work. Not sure what the difference was, but they did the trick.
Thanks for pointing me in the right way, though. I've never had to recover a phone before, so I really appreciate the help.
Click to expand...
Click to collapse
Glad I could help buddy!
Egg Chaser said:
For some reason, after running Odin, the phone would say "E:failed to mount /data (invalid argument). After a bit of researching I found some different files that seemed to work. Not sure what the difference was, but they did the trick.
Thanks for pointing me in the right way, though. I've never had to recover a phone before, so I really appreciate the help.
Click to expand...
Click to collapse
I'm also having problems with my S5839i, and I'm also having trouble flashing the firmware with Odin 3.09.
Can you tell me what you ended up doing, and what files you used?
OhHowWeLaughed said:
I'm also having problems with my S5839i, and I'm also having trouble flashing the firmware with Odin 3.09.
Can you tell me what you ended up doing, and what files you used?
Click to expand...
Click to collapse
Flash stock firmware from odin 1.87..
Read all post of this thread
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Flash stock firmware from odin 1.87..
Read all post of this thread
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
I will try your method, but the OP said that it didn't work, and that he had to use different files. I want to know what different files he used.
Hello,
i tryied to flash CM11 to my i9300 using one of the manual here but i ended up with phone going on boot loop when started(Shows only Samsung i9300 black/white logo in 3seconds loop). I only have an access to download mode
It says:
Product name: GT-i9300
Custom Binary download: Yes
Current Binary: Samsung Official
System Status: Custom
When i try to get the recovery mode installed again the Odin say
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> SingleDownload.
<ID:0/028> boot.img
<ID:0/028> NAND Write Start!!
And thats all. I supose i can connect through the USB while the odin shows the USB COM port and blue color.
Is my phone bricked or is there any way how to save it? Thank you for your advice
honzicek69 said:
Hello,
i tryied to flash CM11 to my i9300 using one of the manual here but i ended up with phone going on boot loop when started(Shows only Samsung i9300 black/white logo in 3seconds loop). I only have an access to download mode
It says:
Product name: GT-i9300
Custom Binary download: Yes
Current Binary: Samsung Official
System Status: Custom
When i try to get the recovery mode installed again the Odin say
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> SingleDownload.
<ID:0/028> boot.img
<ID:0/028> NAND Write Start!!
And thats all. I supose i can connect through the USB while the odin shows the USB COM port and blue color.
Is my phone bricked or is there any way how to save it? Thank you for your advice
Click to expand...
Click to collapse
If I'm not mistaken boot.img is the bootloader, not the recovery. Are you sure you can't get into recovery using the 3-button-combo? If not I would try flashing this recovery via ODIN. And then try to reboot into it using the combo. Then flash CM zip from there again.
Hi, im sure i cant get to recovery using 3 button combo. That gives me only the loop of "Samsung SIII" logo. The 3buttons combo work only for download mode.
Thats what i wrote, when im trying to flash the recovery via ODIN it gets stucked on the on the message <ID:0/028> NAND Write Start!! and nothing else happens. I tryed the 3.07 and 3.09 version of ODIN.
honzicek69 said:
Hi, im sure i cant get to recovery using 3 button combo. That gives me only the loop of "Samsung SIII" logo. The 3buttons combo work only for download mode.
Thats what i wrote, when im trying to flash the recovery via ODIN it gets stucked on the on the message <ID:0/028> NAND Write Start!! and nothing else happens. I tryed the 3.07 and 3.09 version of ODIN.
Click to expand...
Click to collapse
Ah, I'm sorry I misunderstood. I thought that was just a snippet of the log... Try flashing the recovery I provided and see if it flashes. If not, maybe you can flash stock firmware with pit file (new partition table). If nothing flashes, I have no further ideas.
Thanks, but ive already tryed to flash several recovery with the same results (got stucked on NAND write in ODIN), I downloaded stock rom but the package was without pit and other kinds of files (got stucked too on NAND write in ODIN). Its a ROM for TMZ (T-mobile Czech). Do you know where i can get the "full" package. Do i need to flash the pit and other files together with ROM?
You're seriously pottering a brick. The 'full package' contents 3 files, which you've to place in the right Odin-windows +repartition-check. These files are unofficial. Google for files and instruction.
rp158 said:
You're seriously pottering a brick. The 'full package' contents 3 files, which you've to place in the right Odin-windows +repartition-check. These files are unofficial. Google for files and instruction.
Click to expand...
Click to collapse
I could be mistaken but I believe the 3-part-roms (csc / pda / phone) is the "old style" how roms where put out by sammy. You would have to search but I would think you can also use the version you get from sammobile nowadays (one zip) and additionally just use the gt-i9300 pit file found somewhere here in the forums.
@Hawaiihemd: be shure, you're wrong.
honzicek69 said:
Thanks, but ive already tryed to flash several recovery with the same results (got stucked on NAND write in ODIN), I downloaded stock rom but the package was without pit and other kinds of files (got stucked too on NAND write in ODIN). Its a ROM for TMZ (T-mobile Czech). Do you know where i can get the "full" package. Do i need to flash the pit and other files together with ROM?
Click to expand...
Click to collapse
Try this >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << the pit file is in the 4.1.2 download and can be used on both versions.(Also try the 1.85 version of Odin) >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 <<
rp158 said:
@Hawaiihemd: be shure, you're wrong.
Click to expand...
Click to collapse
@rp158 Well, I think I only made a small error in my assumption.
Here are the details on the sammobile download. It seems to hold everything a "3-part-version" holds. I downloaded the file and a look at the .tar file inside the single .zip seems to confirm that.
This post suggests that flashing the .tar with the pit file should work.
I don't know because I haven't tried myself, maybe you have. Or I'm missing a piece of the puzzle. If so, maybe you could point me to it!?
@Hawaiihemd: If I look into the unzipped tar.md5-firmware, there are image-files. One for each partition. If I look into a 3part-zip-file, there are 3 tar.md5-files for each Odin-input-window. I tried only this soft method. The way, described in your cited post, I would only try as a last exit. The whole Odin-firmware-flashing is a black-box: noone knows, why&when during a normal flash a factory-reset is triggered or during repartition efs-data are restored. So, where the software finds the necessary repartition-data in the usual 1part-zip, is also unknown. Sorry, if I hurt you.
rp158 said:
@Hawaiihemd: If I look into the unzipped tar.md5-firmware, there are image-files. One for each partition. If I look into a 3part-zip-file, there are 3 tar.md5-files for each Odin-input-window. I tried only this soft method. The way, described in your cited post, I would only try as a last exit. The whole Odin-firmware-flashing is a black-box: noone knows, why&when during a normal flash a factory-reset is triggered or during repartition efs-data are restored. So, where the software finds the necessary repartition-data in the usual 1part-zip, is also unknown. Sorry, if I hurt you.
Click to expand...
Click to collapse
You didn't, don't worry. I was a little stumped maybe, but only because your answer was so terminal. Actually I only wanted to start a discussion about this, because you seemed to know more about said process than me and I always try to gain knowledge here to better help solving problems. I haven't been in this forum for long or into android for that matter...
That said, I have done the "3-files" version of this process with a .pit file thrice already on different gt-i9000s. Always worked flawlessly.
Looking at the ones in the post @tallman43 suggested, I found the contents of those 3 .tar.md5 files in summary(!) similar to the ones in the 1 .zip from sammobile. That's why I thought it could work in the first place.
One thing I'm sure of is that in both cases the repartition info is in the .pit file. If you choose none, the MMC should not be repartioned. If partitions are reformatted... that's another deal.
Concerning the efs partition, to/from where that info is stored/restored during repartitioning of the MMC... that's a very interesting question!
tallman43 said:
Try this >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << the pit file is in the 4.1.2 download and can be used on both versions.(Also try the 1.85 version of Odin) >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 <<
Click to expand...
Click to collapse
Thank you very much for this hint. It worked well. I used the all files from KOR zip and 1.85 ODIN. Now i have the Korean version but at least i have something to start with and phone which works now.