I've been running AOKP Milestone 6 for about 2 months now. It always had a problem unlocking the lockscreen at full battery as it didn't receive touch input so I just restarted the tablet. Then it would just reboot as the tablet would not turn off if the power button was held. I dont care. Dont turn it off enough for that to make a difference.
Well one day I woke up turned on the tablet and like normal there was no touch recognition. Oh well reboot like normal. Then my tablet stuck in the AOKP animation. It just froze. About halfway through the animation. I used the hard reboot (vol- and power) and it froze again at about the same place. I WTF and go to CWM and reflash the ROM and it froze at applying data. Hard reboot. Flash Galaxy Task. Freeze at applying data. Flash a backup I made on AOKP milestone 6. Froze at applying data. Plug into computer and flash stock root package. SUCCESS!! Then the AOKP boot animation comes up and freezes at the same place as before. I have no idea what to do as I decided I would flash 1 ROM and leave it on my tab because I've hard bricked my infuse before and didn't want to send this in have it come back broken and buy a new one.
Galaxy tab 10.1 wifi running http://forum.xda-developers.com/showthread.php?t=1459287
What version/mod of CWM are you running?
Grab CWM 5.5.0.4 at this address.works pretty well:
https://sites.google.com/site/arashtarafar/
Remember to wipe data/cache after flashing processes...
arashtarafar said:
What version/mod of CWM are you running?
Grab CWM 5.5.0.4 at this address.works pretty well:
https://sites.google.com/site/arashtarafar/
Remember to wipe data/cache after flashing processes...
Click to expand...
Click to collapse
I'm Running 4.0.0.4. Wasnt planning on flashing a lot of ROM so flashing that would be not so important to me. Checking that site out now.
I noticed I forgot to mention it's a wifi model. will update OP.
This currently happen to me too.
Will try to find 3g stock Rom and try to upgrade CWM
Sent from my HTC Sensation XE with Beats Audio using Tapatalk 2
I am currently having this problem too.
It all started when my wifi started not working so I rebooted my tablet. Suddenly im stuck in a bootloop with no way to get out of it.
I'm able to access CWM and have tried wiping cache, but that didnt work. Now i've tried wiping /data but it freezes.
I'm unable to access my USB as it repeatedly says "E:unable to open ums lunfile (No such file or directory).
I've tried using ADB to push a new flash image which worked but im still stuck in a brand new bootloop (presumably because i cant wipe /data).
Can anyone help? I have NO idea how this happened.
Flash a stock ROM using Odin in download mode...now that you are in such trouble flashing a 3G ROM doesn't make much difference...
Hello,
I am new here so I apologize if this has been sked before.
I had cm9 stable version installed on my phone, and it was working fine. On Thursday, I changed my lock pattern as it had no lock on, but I forgot the pattern I put in (I tend to make it complicated) and entered it wrong many times that it asked for my google account and password, but when it got to that point, it started rebooting and it got stuck on the cm robot, and whenever it gets to the google account thing, it goes back to the robot and so on. Then I flashed a stock ICS rom using Odin hoping it would fix the issue, but it got stuck on the glowing s screen. The phone isn't rooted anymore. I tried wiping cache partition but that didn't work. My biggest problem is that I didn't back my phone up and I have important files that I need. Is there a way to fix this issue?
I would really appreciate your help. Thanks!
asjk94 said:
Hello,
I am new here so I apologize if this has been sked before.
I had cm9 stable version installed on my phone, and it was working fine. On Thursday, I changed my lock pattern as it had no lock on, but I forgot the pattern I put in (I tend to make it complicated) and entered it wrong many times that it asked for my google account and password, but when it got to that point, it started rebooting and it got stuck on the cm robot, and whenever it gets to the google account thing, it goes back to the robot and so on. Then I flashed a stock ICS rom using Odin hoping it would fix the issue, but it got stuck on the glowing s screen. The phone isn't rooted anymore. I tried wiping cache partition but that didn't work. My biggest problem is that I didn't back my phone up and I have important files that I need. Is there a way to fix this issue?
I would really appreciate your help. Thanks!
Click to expand...
Click to collapse
If you have CWM installed, you can mount the sdcard in the Mounts and Storage menu, but I don't remember if that sdcard was for internel or external.
Did you try wiping Dalvik cache in Advanced menu (Also CWM)? If you do, wait 5-10min for it to boot up.
Flash Siyah kernel, boot into recovery then mount USB and backup your files.
Then just simply wipe/install the rom zip of your choice.
RhythmHack said:
If you have CWM installed, you can mount the sdcard in the Mounts and Storage menu, but I don't remember if that sdcard was for internel or external.
Did you try wiping Dalvik cache in Advanced menu (Also CWM)? If you do, wait 5-10min for it to boot up.
Click to expand...
Click to collapse
The problem with this is I lost CWM after I flashed the stock ICS rom. It's not rooted anymore
samsung nexus mobile inform about bluetooth
Samsung Neksus Mobile Bluetooth him when I've been in my Bluetooth Paring and does Trnasfer a file from your mobile When the file reaches the Dosre mobile but no files in your mobile when sixth to Resive does not Resive Pljh Suchses Help Me I've ever had in bringing Pljh Help Me kosice But of what I do is I just did a reset two Time
plz help me sir
asjk94 said:
The problem with this is I lost CWM after I flashed the stock ICS rom. It's not rooted anymore
Click to expand...
Click to collapse
boot to stock recovery and perform factory data reset.
You will lose, sms, installed apps etc but all data stored on your internal and external SD will be safe
Swyped from my Samsung Galaxy SII
TheATHEiST said:
Flash Siyah kernel, boot into recovery then mount USB and backup your files.
Then just simply wipe/install the rom zip of your choice.
Click to expand...
Click to collapse
Thank you! I will try that now and let you know if it works.
"Unfortunately Setup Wizard has stopped working" - after trying to install Gapps
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
RostokMcSpoons said:
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
Click to expand...
Click to collapse
What version of CyanogenMod are we talking about here? You need to be more specific.
themadba said:
What version of CyanogenMod are we talking about here? You need to be more specific.
Click to expand...
Click to collapse
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
RostokMcSpoons said:
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
Click to expand...
Click to collapse
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
themadba said:
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
Click to expand...
Click to collapse
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Edit: Damn, I couldn't get to sleep without fixing it first, and luckily I did: I rebooted my pc, and the explorer eventually did show the contents ok (just very slowly). I dragged the zip in, installed it with CWM and *huzzah* it's working! The only odd thing is the camera has disappeared from the applications...
I can wait until tomorrow to work that out.
Thanks for your help
RostokMcSpoons said:
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Click to expand...
Click to collapse
That's strange. I recently flashed a wrong gapps file and it led to some things not working, especially the Play Store. I tried just wiping the cache and dalvik cache and flashing, but that didn't work. So I did a wipe data/factory reset, wipe cache and wipe dalvik cache, reflashed the ROM and then flashed gapps. I think I may have wiped the cache and dalvik cache once more for good luck, and then repaired permissions in the advanced section of recovery. Phone booted up fine and all apps worked perfectly. I doubt the phone is knackered, perhaps try and different ROM just to make sure it boots fine, and then try flash CM10.1 again. Good luck
Samsung Galaxy s2 CM10 trouble Setup Wizard has stopped working
Im from Asia and I guess Samsung s2 int’l version has different features. I already updated my firmware to JB 4.1.2 (leaked) and since I am not satisfied with it,I rooted it and installed siyah as well as cm10 + gapps from XDA links. I followed everything according to the posts and vids.The problem is that after rebooting and CM start up showed up,the next prompt was UNFORTUNATELY,SET UP WIZARD HAS STOPPED WORKING. What’s wrong? I have tried 6x times and no one worked correctly. HELP me!
I was under the same problem few days ago...
flashed 4.2.2 gapps on 4.1.2..
and succumbed to 'unfortunately setup wizard has stopped' error, until i flashed the respective 4.2.2 gapps.
but sadly it ate away my internal memory (cant help )
So the point is
just flash the respective gapps
and then the ROM again
Hi I just installed cyangenmod and it works but setup wizard is crashing and I don't know how to fix this my phone its pretty much unusable. Need help urgently!
The key is to wipe regular cache partition after installing Gapp zip! :]
I think you have the key. I get my cm10.1.5 and I flashed a realy slim gapps (11mb), but after that I didn't wipe cache and dalvik. So the phone didn't woke up because it get stucked in the wizzard setup. So I have to do as u said. And like the other said, reinstall the rom and then the gapps.
Galaxy 5
After using android 2.1 update 1 in my samsung galaxy 5 (GT-I5503)
I updated it with 2.2 froyo then 2.3 then 4.0 then 4.1.
last time I updated to 4.2 CyanogenMod
Before that I could work good in others. But in 4.2 there were problem of contacts in SIM card, these contacts not showing in device.
Then after my device not detacting SIM card for last few months.
Now my phone showing "Unfortunately, Setup Wizard has stopped."
How can I start my phone?
Galaxy Grand CM12 error
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
fixed this error(setup wizard or google play service has stoped).first you must install cm13 after that install your gapps(use phliz toch recovery) then reboot device.you Will notic that device doesn't boot or you'll have the same problem(setup wizard).come back to recovery and install the other recovery(change phliz touch to CWM) then with wipe install the same ROM and after that install gapps.the gapps won't install so reboot the device.enjoy your ROM with gapps
fix
FOR ANY1 facing this problem on cm13 setup wizard stopped.
just do as i say it's actually funny but it worked for me for the very 1st time.
I tried all the fix given like clear cache or flash new gapps but nothing solved the problem.
So just do what i say.
when u see the setup wizard stopped error.
on that screen just touch all the corner of the screen of ur phone
staring from the top left corner then the top right and so to the bottom right corner and then at last the left most corner.
Just keep trying i doesn't happen for the first time.
Most of u would be thinking it's funny but it actually worked just give it a try.
it helped me might work for u as well
---------- Post added at 07:49 PM ---------- Previous post was at 07:43 PM ----------
dkarry said:
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
Click to expand...
Click to collapse
bro just start your phone and on the screen where u see the error
leave it as it is and do this:
touch the top most left corner twice like tapping on it nad then the right most corner then the right bottom corner then lastly the left most corner.
it helped me might help u as well
sir,
i have samsung galaxy star GT-S5282 model but i am unabble to start the Device because of error of unfortunately samsung setup wizard has stoppeed
hello,
have a problem with my galaxy s2:
just updated my s2 to the latest nightly of cyanogenmod "cm-10.2-20130921-NIGHTLY-i9100".
my old kernel was: dorimanx 9.34 + rootbox 4.2
after update it booted to cyanogenmod and worked for few minutes. then it showed some errors like "android.core.*" stopped working. after reboot it can´t even boot on recovery mode. download mode is still availabile, flashing to old kernel + firmware doesn´t help anything.
same probelm: no boot (stuck at bootscreen)
anyone has an idea what to do?
thanks in advice
Have you tried wiping data in recovery when it stuck in boot loop.
Also did you format system before you flashed cm 10.2
I got it to work fine on my S2. Played around on it for a few hours, got everything installed. Then bam, upon restart I get boot loop. Wiping cache/delvik didn't work. Various tutorials recommend repeating the install process and/or continuing to factory wipe until it works.
EDIT: I have repeated the process. Make sure that before you install CM/Gapps, you factory reset, wipe cache and delvik. Have reset the phone several times and it now works.
I have been trying to upgrade from CM10.1 stable to CM10.2 stable. I am using CWM 6.0.2.9 internal. I originally flashed both CM10.2 and Gapps jb-20130813 and get stuck at a blank screen. I then restored to my 10.1 and used the CM updater to install 10.2. It came up fine but google apps were not working (gray internet connection instead of blue). I rebooted into recovery and flashed the 20130813 gapps zip file and once again was stuck at a blank screen. I tried clearing the cache and dalvik but it didn't seem to help. Am I using the wrong version of gapps or something?
mogators1 said:
I have been trying to upgrade from CM10.1 stable to CM10.2 stable. I am using CWM 6.0.2.9 internal. I originally flashed both CM10.2 and Gapps jb-20130813 and get stuck at a blank screen. I then restored to my 10.1 and used the CM updater to install 10.2. It came up fine but google apps were not working (gray internet connection instead of blue). I rebooted into recovery and flashed the 20130813 gapps zip file and once again was stuck at a blank screen. I tried clearing the cache and dalvik but it didn't seem to help. Am I using the wrong version of gapps or something?
Click to expand...
Click to collapse
I think I have it figured out. I posted the following in the developers section where others had been complaining of a similar issue:
mogators1 said:
Still not working for me. I went from CM10.1 stable and cleared cache and dalvik. I then flashed CM10.2 stable and the signed google apps (20130813). It booted the first time and wifi would not turn on. I rebooted to recovery and cleared cache's again and rebooted to a "black" screen. It's been sitting like that for over 10 minutes.
May have figured something out. After waiting a few more minutes, I plugged the Nook into my computer so that it could pull some charge while I continued to wait to see if anything happened. In less than a minute, I heard my computer make the sound it makes when something is plugged into the USB port. I looked over and saw the Nook was booting. I unplugged it and rebooted to see if it would boot this time. Still nothing, so I plugged in again and it booted shortly afterwards again. I noticed there was a status message saying that USB debugging was on. I turned that off and now have rebooted twice in a row without being connected to the PC. I think I'm good to go. Hopefully this will help someone else.
Click to expand...
Click to collapse