i had CyanogenMod 9 on my tab but i changed it to Ganbarou CM9 worked ok for a few hours then it just stopped, so when i reboot it the same thing happens. i went to recovery mod wiped data, rebooted again still the same problem. so i tried to reinstall the zip file in the SD via recovery mod but no go it just reboots.
finally got it in download mod and connected it to kies but it did not connect.
any tip on how to solve this problem?
any one?
nobody850 said:
i had CyanogenMod 9 on my tab but i changed it to Ganbarou CM9 worked ok for a few hours then it just stopped, so when i reboot it the same thing happens. i went to recovery mod wiped data, rebooted again still the same problem. so i tried to reinstall the zip file in the SD via recovery mod but no go it just reboots.
finally got it in download mod and connected it to kies but it did not connect.
any tip on how to solve this problem?
Click to expand...
Click to collapse
What do you mean by just stopped? Also, returning to factory settings via Odin almost always works so you could attempt that since you can get into download mode.
i got the samsung update for the tab: android 3.1, that made it work. now i am on 4.0.4 and all is ok
I've been running AOKP Milestone 6 for about 2 months now. It always had a problem unlocking the lockscreen at full battery as it didn't receive touch input so I just restarted the tablet. Then it would just reboot as the tablet would not turn off if the power button was held. I dont care. Dont turn it off enough for that to make a difference.
Well one day I woke up turned on the tablet and like normal there was no touch recognition. Oh well reboot like normal. Then my tablet stuck in the AOKP animation. It just froze. About halfway through the animation. I used the hard reboot (vol- and power) and it froze again at about the same place. I WTF and go to CWM and reflash the ROM and it froze at applying data. Hard reboot. Flash Galaxy Task. Freeze at applying data. Flash a backup I made on AOKP milestone 6. Froze at applying data. Plug into computer and flash stock root package. SUCCESS!! Then the AOKP boot animation comes up and freezes at the same place as before. I have no idea what to do as I decided I would flash 1 ROM and leave it on my tab because I've hard bricked my infuse before and didn't want to send this in have it come back broken and buy a new one.
Galaxy tab 10.1 wifi running http://forum.xda-developers.com/showthread.php?t=1459287
What version/mod of CWM are you running?
Grab CWM 5.5.0.4 at this address.works pretty well:
https://sites.google.com/site/arashtarafar/
Remember to wipe data/cache after flashing processes...
arashtarafar said:
What version/mod of CWM are you running?
Grab CWM 5.5.0.4 at this address.works pretty well:
https://sites.google.com/site/arashtarafar/
Remember to wipe data/cache after flashing processes...
Click to expand...
Click to collapse
I'm Running 4.0.0.4. Wasnt planning on flashing a lot of ROM so flashing that would be not so important to me. Checking that site out now.
I noticed I forgot to mention it's a wifi model. will update OP.
This currently happen to me too.
Will try to find 3g stock Rom and try to upgrade CWM
Sent from my HTC Sensation XE with Beats Audio using Tapatalk 2
I am currently having this problem too.
It all started when my wifi started not working so I rebooted my tablet. Suddenly im stuck in a bootloop with no way to get out of it.
I'm able to access CWM and have tried wiping cache, but that didnt work. Now i've tried wiping /data but it freezes.
I'm unable to access my USB as it repeatedly says "E:unable to open ums lunfile (No such file or directory).
I've tried using ADB to push a new flash image which worked but im still stuck in a brand new bootloop (presumably because i cant wipe /data).
Can anyone help? I have NO idea how this happened.
Flash a stock ROM using Odin in download mode...now that you are in such trouble flashing a 3G ROM doesn't make much difference...
"Unfortunately Setup Wizard has stopped working" - after trying to install Gapps
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
RostokMcSpoons said:
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
Click to expand...
Click to collapse
What version of CyanogenMod are we talking about here? You need to be more specific.
themadba said:
What version of CyanogenMod are we talking about here? You need to be more specific.
Click to expand...
Click to collapse
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
RostokMcSpoons said:
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
Click to expand...
Click to collapse
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
themadba said:
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
Click to expand...
Click to collapse
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Edit: Damn, I couldn't get to sleep without fixing it first, and luckily I did: I rebooted my pc, and the explorer eventually did show the contents ok (just very slowly). I dragged the zip in, installed it with CWM and *huzzah* it's working! The only odd thing is the camera has disappeared from the applications...
I can wait until tomorrow to work that out.
Thanks for your help
RostokMcSpoons said:
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Click to expand...
Click to collapse
That's strange. I recently flashed a wrong gapps file and it led to some things not working, especially the Play Store. I tried just wiping the cache and dalvik cache and flashing, but that didn't work. So I did a wipe data/factory reset, wipe cache and wipe dalvik cache, reflashed the ROM and then flashed gapps. I think I may have wiped the cache and dalvik cache once more for good luck, and then repaired permissions in the advanced section of recovery. Phone booted up fine and all apps worked perfectly. I doubt the phone is knackered, perhaps try and different ROM just to make sure it boots fine, and then try flash CM10.1 again. Good luck
Samsung Galaxy s2 CM10 trouble Setup Wizard has stopped working
Im from Asia and I guess Samsung s2 int’l version has different features. I already updated my firmware to JB 4.1.2 (leaked) and since I am not satisfied with it,I rooted it and installed siyah as well as cm10 + gapps from XDA links. I followed everything according to the posts and vids.The problem is that after rebooting and CM start up showed up,the next prompt was UNFORTUNATELY,SET UP WIZARD HAS STOPPED WORKING. What’s wrong? I have tried 6x times and no one worked correctly. HELP me!
I was under the same problem few days ago...
flashed 4.2.2 gapps on 4.1.2..
and succumbed to 'unfortunately setup wizard has stopped' error, until i flashed the respective 4.2.2 gapps.
but sadly it ate away my internal memory (cant help )
So the point is
just flash the respective gapps
and then the ROM again
Hi I just installed cyangenmod and it works but setup wizard is crashing and I don't know how to fix this my phone its pretty much unusable. Need help urgently!
The key is to wipe regular cache partition after installing Gapp zip! :]
I think you have the key. I get my cm10.1.5 and I flashed a realy slim gapps (11mb), but after that I didn't wipe cache and dalvik. So the phone didn't woke up because it get stucked in the wizzard setup. So I have to do as u said. And like the other said, reinstall the rom and then the gapps.
Galaxy 5
After using android 2.1 update 1 in my samsung galaxy 5 (GT-I5503)
I updated it with 2.2 froyo then 2.3 then 4.0 then 4.1.
last time I updated to 4.2 CyanogenMod
Before that I could work good in others. But in 4.2 there were problem of contacts in SIM card, these contacts not showing in device.
Then after my device not detacting SIM card for last few months.
Now my phone showing "Unfortunately, Setup Wizard has stopped."
How can I start my phone?
Galaxy Grand CM12 error
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
fixed this error(setup wizard or google play service has stoped).first you must install cm13 after that install your gapps(use phliz toch recovery) then reboot device.you Will notic that device doesn't boot or you'll have the same problem(setup wizard).come back to recovery and install the other recovery(change phliz touch to CWM) then with wipe install the same ROM and after that install gapps.the gapps won't install so reboot the device.enjoy your ROM with gapps
fix
FOR ANY1 facing this problem on cm13 setup wizard stopped.
just do as i say it's actually funny but it worked for me for the very 1st time.
I tried all the fix given like clear cache or flash new gapps but nothing solved the problem.
So just do what i say.
when u see the setup wizard stopped error.
on that screen just touch all the corner of the screen of ur phone
staring from the top left corner then the top right and so to the bottom right corner and then at last the left most corner.
Just keep trying i doesn't happen for the first time.
Most of u would be thinking it's funny but it actually worked just give it a try.
it helped me might work for u as well
---------- Post added at 07:49 PM ---------- Previous post was at 07:43 PM ----------
dkarry said:
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
Click to expand...
Click to collapse
bro just start your phone and on the screen where u see the error
leave it as it is and do this:
touch the top most left corner twice like tapping on it nad then the right most corner then the right bottom corner then lastly the left most corner.
it helped me might help u as well
sir,
i have samsung galaxy star GT-S5282 model but i am unabble to start the Device because of error of unfortunately samsung setup wizard has stoppeed
Installed latest CM10 nightly. Now just sits at boot animation. Attempted to restore. Backups gone. All other ROMS gone for SD card. Can get into recovery, but am lost at that point. Tried clearing cache several times through fastboot. Have no clue how to use adb to sideload. Rate myself as an almost noob. Any help appreciated.
johnpius said:
Installed latest CM10 nightly. Now just sits at boot animation. Attempted to restore. Backups gone. All other ROMS gone for SD card. Can get into recovery, but am lost at that point. Tried clearing cache several times through fastboot. Have no clue how to use adb to sideload. Rate myself as an almost noob. Any help appreciated.
Click to expand...
Click to collapse
I'm in the same boat, stuck at the CM boot animation. How did you get back to recovery? I hold the power button and the home and back buttons flash and that's it.
Edit: The whole "hold the phone up to a bright light while holding the power button" trick did the job. I was flashing from Android Revolution to CM10.1 and I did perform a factory reset and sideloaded CM through CWM. After another wipe everything worked out fine.
Are you coming from another rom? If so, did you factory reset after flashing ?
cschmitt said:
Are you coming from another rom? If so, did you factory reset after flashing ?
Click to expand...
Click to collapse
Im assuming based on his post he is not coming from another rom and has been flashing CM nightlies regularly and this latest flash was done per routine but is not working for some reason.
I updated the latest 6-23 nightly and its working fine so far, sorry to hear about your issues.
Sent from my Nexus 7 using Tapatalk 2
I dirty flashed the latest nightly as well, no issues.
I've been having a problem getting any 4.3 ROM to boot after the initial boot. I've seen a few other people with the same problem and I can't figure out a fix. Thought I'd ask the general Q&A.
I've used Beanstalk and Carbon (great ROMs) a few carbon 4.3 nightlies and Beanstalk 4.3.00. I installed their 4.3 builds (after checking sums to verify download) flash gapps, wipe cahce/dalvik and boot up. Set up goes great and rom runs great. but even without installing any other apps, using no backups or anything if I reboot it sticks on samsung screen and can't get past it. Every time, I even rebooted without finishing setup and wouldnt advance past samsung.
I even flashed 4.3 rom and gapps, let it reinstall apps from market then booted to recovery and made a backup. Then could'nt reboot. But if I wipe and restore the backup it will boot fine the 1 time, but again any attempts to reboot stick on samsung screen. Wiping cache/dalvik from recovery does not help, fix permissions from recovery does not help.
Anybody have this problem and find a fix?
Ok, I tried slim bean beta 2, no luck, tried ktoons kernel, no luck. Guess I'm staying with 4.2.2 until there is some movement on this issue.