Just curious, but if I flash viperrez rom 1.0.3 from my gingerbread rom now am I am able to restore using a nand backup? Or once you go to ics can you not flash back to gingerbread that easily?
gsxcorey said:
Just curious, but if I flash viperrez rom 1.0.3 from my gingerbread rom now am I am able to restore using a nand backup? Or once you go to ics can you not flash back to gingerbread that easily?
Click to expand...
Click to collapse
Why are you still on gingerbread?
Sent from my ADR6425LVW using Tapatalk 2
gsxcorey said:
Just curious, but if I flash viperrez rom 1.0.3 from my gingerbread rom now am I am able to restore using a nand backup? Or once you go to ics can you not flash back to gingerbread that easily?
Click to expand...
Click to collapse
If you are s-off, you're fine. If not, you can go back to GB, you just have to flash the correct boot.img right after doing the nand restore or you'll be stuck on the splash screen and the ROM won't boot up.
Sent from my SCH-I535 using xda app-developers app
Just never went to one of the ics roms. I heard the camera quality wasn't the best and they had a lot of issues. this new one though sounds promising? Do you know if i can just flash the rom and i'm good and if i don't like it can i just restore my nand backup?
jaysckap said:
Why are you still on gingerbread?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
gsxcorey said:
Just never went to one of the ics roms. I heard the camera quality wasn't the best and they had a lot of issues. this new one though sounds promising? Do you know if i can just flash the rom and i'm good and if i don't like it can i just restore my nand backup?
Click to expand...
Click to collapse
Gray answered your question.
Sent from my ADR6425LVW using Tapatalk 2
graymonkey: So just to confirm if I don't like it just restore the nand backup and then flash the boot.img for the oem rom, etc?
gsxcorey said:
Just never went to one of the ics roms. I heard the camera quality wasn't the best and they had a lot of issues. this new one though sounds promising? Do you know if i can just flash the rom and i'm good and if i don't like it can i just restore my nand backup?
Click to expand...
Click to collapse
If your S-on you need to flash the firmware patch.
Sent from my ADR6425LVW using xda app-developers app
I am s-on.
I know it's a stupid question and i've been searching, but am having issues. So I'll just need the firmware patch to go from ics back to gingerbread right? If so can someone help me with a link? I am running cleanrom gingerbread version right now.
Or must I flash the firmware before i go to the new viperrez1.0.3 rom?
molson8045 said:
If your S-on you need to flash the firmware patch.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
gsxcorey said:
I am s-on.
I know it's a stupid question and i've been searching, but am having issues. So I'll just need the firmware patch to go from ics back to gingerbread right? If so can someone help me with a link? I am running cleanrom gingerbread version right now.
Or must I flash the firmware before i go to the new viperrez1.0.3 rom?
Click to expand...
Click to collapse
You need the old firmware patch found here http://forum.xda-developers.com/showthread.php?t=1614180&highlight=old+firmware+patch. When it asks to reboot say no and it will boot back to recovery and then flash the patch. Several roms currently have the patch included in aroma but I don't think this one does yet.
---------- Post added at 09:46 PM ---------- Previous post was at 09:33 PM ----------
You may want to check this out as well if your planning on going from GB to ICS or the other way around. http://forum.xda-developers.com/showthread.php?t=1547496&highlight=con247
With Amon RA my nand backups backup the boot image already? So wouldn't I be able to just restore the nand backup if i was going from ics back to gingerbread? Since the boot image is already a part of the nand backup?
gsxcorey said:
With Amon RA my nand backups backup the boot image already? So wouldn't I be able to just restore the nand backup if i was going from ics back to gingerbread? Since the boot image is already a part of the nand backup?
Click to expand...
Click to collapse
The boot image is there however we can't flash boot images through recovery if s-on, this temporarily allows recovery to flash the boot image.
Actually viperrez does have the patch built into aroma
Sent from my ADR6425LVW using xda app-developers app
gotcha so if i go with viperez i'll be good to go. Just if i go back to gingerbread i will need to use that flash that lets me temporarely flash the boot image. I think i got it now. Sorry for the newb questions guys. Still fairly new at all this stuff.
If this has everything built in, i can always switch between any ics rom once i do the viperrez rom right? it's just going back to gingerbread that i need to run that flash to let me flash the boot image? Sorry, last stupid question.
molson8045 said:
Actually viperrez does have the patch built into aroma
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
gsxcorey said:
gotcha so if i go with viperez i'll be good to go. Just if i go back to gingerbread i will need to use that flash that lets me temporarely flash the boot image. I think i got it now. Sorry for the newb questions guys. Still fairly new at all this stuff.
Click to expand...
Click to collapse
Thats right just follow the instructions in aroma and you'll be just fine.
I can't reply in the viperrez thread as I don't have enough posts.
I got it all working on 1.0.3, but how come in the settings > about are at the top i don't have a "check for updates" link at all like it shows on their first post in the main thread they have? I have no area in my settings to check for updates?
it appears i lost the updates due to titanium backup restoring go launcher.
Related
I haven't seen a thread for this yet and some people who are running old firmware don't know about this so I thought I'd post it for those that are running old firmware and want to flash ICS Roms without updating to the latest leak. This will work for any .22 based Rom I have tried it on so far. Some devs mention it, others don't. I do not know who made this patch but it came with Scroslers Cleanrom and I thank him for it. If you have constant reboots after flashing a .22 based rom, this is for you.
Hope this helps.
Cameron
every ics rom thread has a patch listed..... and for clearity... Joel was the brains behind the patch... while we may not of used his exact files he was the one that informed us of what files needed to be replaced
lllboredlll said:
every ics rom thread has a patch listed..... and for clearity... Joel was the brains behind the patch... while we may not of used his exact files he was the one that informed us of what files needed to be replaced
Click to expand...
Click to collapse
That may be but I still keep seeing people that don't know about it. So thought i would post it anyway. Doesnt surprise me that he thought of it. He's a genius. So thanks to him.
Sent from my ADR6425LVW using xda premium
How do i go about applying this patch? do i have to rename it something and flash in hboot/bootloader?
After the rim loads up, immediately reboot to recovery, flash in recovery
Sent from my ADR6425LVW using Tapatalk 2
roosxter said:
After the rim loads up, immediately reboot to recovery, flash in recovery
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
What is the rim? Ok so I boot into recovery. I have this patch on the root of my external sd i'm assuming. and using the amon ra recovery i just flash it like i would a rom?
edit: Nevermind! problem solved. i just flash using amon ra recovery as if it were a rom. sweet.
Yup and I meant rom lol
Sent from my ADR6425LVW using Tapatalk 2
roosxter said:
After the rim loads up, immediately reboot to recovery, flash in recovery
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Nah you just have to flash it before you boot into the Rom
Sent from my ADR6425LVW using Tapatalk 2
Ok i started with a stock rooted GB S-OFF with Amons 3.15 recovery
I then downloaded the firmware/radios/hboot combos from chilpill here
http://forum.xda-developers.com/showthread.php?t=1614366
i got the ICS-2.25-JB-5-7 zip then i flashed the NEW FIRMWARE PATCH
and then i got NEWTS RLS 1 ROM
Im getting alot of errors and the main one is HTCDM has stopped and wondering if i have done something wrong I have done and redone again and wiped twice to three times
My questions are and i so apologize because i know its been a wore out subject
But how to know which firmware I am on ??
example GB firmware is this number???
example ICS firmware is this number???
if im on GB firmware and want to goto ICS firmware do i need OLD or NEW FIRMWARE PATCH???
If im on ICS firmware and want to goto GB firmware do i need OLD or NEW FIRMWARE PATCH???
Like i said I am so sorry but it is confusing because you say to get old firmware patch to update to ICS but i thought it would be new firmware to go to ICS
carycooke said:
Ok i started with a stock rooted GB S-OFF with Amons 3.15 recovery
I then downloaded the firmware/radios/hboot combos from chilpill here
http://forum.xda-developers.com/showthread.php?t=1614366
i got the ICS-2.25-JB-5-7 zip then i flashed the NEW FIRMWARE PATCH
and then i got NEWTS RLS 1 ROM
Im getting alot of errors and the main one is HTCDM has stopped and wondering if i have done something wrong I have done and redone again and wiped twice to three times
My questions are and i so apologize because i know its been a wore out subject
But how to know which firmware I am on ??
example GB firmware is this number???
example ICS firmware is this number???
if im on GB firmware and want to goto ICS firmware do i need OLD or NEW FIRMWARE PATCH???
If im on ICS firmware and want to goto GB firmware do i need OLD or NEW FIRMWARE PATCH???
Like i said I am so sorry but it is confusing because you say to get old firmware patch to update to ICS but i thought it would be new firmware to go to ICS
Click to expand...
Click to collapse
If you flashed one of my ics hboot combos then you no longer need to flash the new/old firmware patch after flashing a ics Rom
And I haven't done this myself but flashing the new firmware patch on top of a gingerbread Rom should alow you to use ics firmware on a gingerbread Rom
As for that error I have no idea why your getting it, maybe a bad download or a app conflicting with something, afaik nothing with the firmware or firmware patches will cause that issue
Sent from my ADR6425LVW using Tapatalk 2
thanks superchilpil i do appreciate it tremendously
this might not be the best place for this but here goes.
i seen some talk that running ics roms on old firmware with patch is better the updating your firmware. i am s-off, ics with new firmware.
what are some of your thoughts on this?
neckbonest said:
this might not be the best place for this but here goes.
i seen some talk that running ics roms on old firmware with patch is better the updating your firmware. i am s-off, ics with new firmware.
what are some of your thoughts on this?
Click to expand...
Click to collapse
The simple phrase "if it ain't broke then don't fix it" applies here
If your not having any signal issues then don't upgrade
Sent from my ADR6425LVW using Tapatalk 2
Hi, I'm fairly new here and I've read that if you flash a GB 2.17 base ROM while on the 2.17 firmware it will make for a better experience. My question is where can I download this and what would be the procedure while flashing ROMs? Can someone please enlighten me because I want to bring out the best in my phone.
Sent from my PG86100 using Tapatalk 2
Here is the AIO for 2.17 - LINK. You would put this on the root of your sd card, then go into bootloader and let it do it's thing. Will automatically ask you to update.
Then just find the 2.17 ROM you would like to install and flash it.
Vdubtx said:
Here is the AIO for 2.17 - LINK. You would put this on the root of your sd card, then go into bootloader and let it do it's thing. Will automatically ask you to update.
Then just find the 2.17 ROM you would like to install and flash it.
Click to expand...
Click to collapse
Does this mess with hboot or bootloader (i.e. upgrade it from 1.4 to 1.5)?
I don't think so. Freeza usually removes HBOOT from his zips. May want to wait for someone else to confirm. Although, if you're already S-OFF you can just download the file in the sticky to go back to 1.4.
Sent from my PG86100 using XDA
fredrick1213 said:
Does this mess with hboot or bootloader (i.e. upgrade it from 1.4 to 1.5)?
Click to expand...
Click to collapse
Does not mess with bootloader. In the linked post, he does however state that he assumed it was to be used with 1.4.
So I just restore my backup of the stock old base ROM and flash this? Also am I supposed to wipe when flashing the 2.17 ROM of my choice? Sorry for all the questions. Just wanna familiarize myself with this stuff
Sent from my PG86100 using Tapatalk 2
fredrick1213 said:
So I just restore my backup of the stock old base ROM and flash this? Also am I supposed to wipe when flashing the 2.17 ROM of my choice? Sorry for all the questions. Just wanna familiarize myself with this stuff
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
Don't know what you have as a back up, but I would do a clean install of a 2.17 ROM after you install the 2.17 firmware.
Vdubtx said:
Don't know what you have as a back up, but I would do a clean install of a 2.17 ROM after you install the 2.17 firmware.
Click to expand...
Click to collapse
Sorry I have the stock ROM as a backup. Not sure what the base is although I'm sure it's not 2.17. It's whatever is installed after achieving s-off and downgrading. Is it recommended for the battery to be at 100% before flashing a new ROM?
Sent from my PG86100 using Tapatalk 2
fredrick1213 said:
Sorry I have the stock ROM as a backup. Not sure what the base is although I'm sure it's not 2.17. It's whatever is installed after achieving s-off and downgrading. Is it recommended for the battery to be at 100% before flashing a new ROM?
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
Not necessary for the phone to be 100% charged for flashing. I wouldn't flash with anything lower than 50% though.
Okay so I flashed that zip through the bootloader but I'm still on the 1.13 base. I though that was supposed to upgrade to the 2.17 base
Sent from my PG86100 using Tapatalk 2
fredrick1213 said:
Okay so I flashed that zip through the bootloader but I'm still on the 1.13 base. I though that was supposed to upgrade to the 2.17 base
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
You have to flash a 2.17 ROM. The 1.13 base is ROM, has nothing to do with the firmware that you flashed.
the link has been modified to ONLY flash parts of 2.17, the radio and a few others things i believe BUT it wont make your HBOOT1.5 or change your S-OFF status or hurt you, when u update youll notice only the first few items in the big list off the update, actually get updated.
its exactly what you were asking for and its safe. just make sure u download the file correctly and copy it over correctly. anything wrong with this file can brick your phone since its concerning your bootloader.
Ok I'm either not getting something or I'm totally over thinking this does this have to be flashed before flashing every 2.17 ROM? Do i restore a certain ROM to flash it and then flash another ROM? If someone can detail the flashing process for this I'd greatly appreciate it (including when and what to wipe)
Sent from my PG86100 using Tapatalk 2
fredrick1213 said:
Ok I'm either not getting something or I'm totally over thinking this does this have to be flashed before flashing every 2.17 ROM? Do i restore a certain ROM to flash it and then flash another ROM? If someone can detail the flashing process for this I'd greatly appreciate it (including when and what to wipe)
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
Since you have already flashed the 2.17 firmware, all you need to do is flash a Rom. You do not need to flash the firmware again.
Find any 2.17 or ICS based ROM and flash away. Be sure to read the OP to see what works or not. When I choose a ROM to flash I always read a few of the last pages on the thread to see if any issues are being discussed.
When flashing a new base ROM, it is advised to do a backup. I backup sms,mms,call history, apps, and then do a full wipe prior to flashing. This can help alleviate any potential issues from one ROM to the other.
fredrick1213 said:
Ok I'm either not getting something or I'm totally over thinking this does this have to be flashed before flashing every 2.17 ROM? Do i restore a certain ROM to flash it and then flash another ROM? If someone can detail the flashing process for this I'd greatly appreciate it (including when and what to wipe)
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
You don't flash it in recovery at all, you flash it in bootloader by renaming it pg86img.zip, putting it on the root of the sdcard, and let it flash, after that you have the firmware and won't have to worry about it again.
Sent from my PG86100 using xda premium
lpjzfan2005 said:
You don't flash it in recovery at all, you flash it in bootloader by renaming it pg86img.zip, putting it on the root of the sdcard, and let it flash, after that you have the firmware and won't have to worry about it again.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
I'm aware of that part. It's pretty much all I knew lol. Thanks for your patience guys. You answered all of my questions
Sent from my PG86100 using Tapatalk 2
Hi. So I installed a 3.14.605.5 leak, and started to have bootloop issues. Prior to this it was s-on, unlocked. I now know I probably needed to flash the ruu twice, but I only did it once. I think I read instructions from a bad source. Since then I've done s-off successfully (since I was on the right firmware) and installed Rezrom s4 2,5. It boots up and works mostly ok, except going to the dialer crashes the phone and reboots it. Every time.
So now I'm wondering what I have to do. do I need to revert back to a leak?
thank you so much...
Try giving stock recovery a flash, factory reset then reflash the rom.
Sent from my ADR6425LVW using xda app-developers app
Snuzzo said:
Try giving stock recovery a flash, factory reset then reflash the rom.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Really? you aren't referring to "Vigor_Stock_Doedexed_3.14.605.5.zip"? you just mean flash a stock recovery? ive got amen ra right now, 3.15 I think...
cableguy1 said:
Really? you aren't referring to "Vigor_Stock_Doedexed_3.14.605.5.zip"? you just mean flash a stock recovery? ive got amen ra right now, 3.15 I think...
Click to expand...
Click to collapse
He is referring to the stock recovery. You can get it here...last item down the list: http://www.androidfilehost.com/main/-Support_Files-/SuperChilPil/
Just out of curiosity, is your hboot showing you being on ics firmware, as it should?
Old firmware patch or new firmware patch is your solution
What rom are you running?
Sent from my Rezound that finally has AOSP
superchilpil said:
Old firmware patch or new firmware patch is your solution
What rom are you running?
Sent from my Rezound that finally has AOSP
Click to expand...
Click to collapse
He said rez rom s4 2.5 ... He said he is on ICS firmware but I'm thinking he's still on GB and he may flashed a stock rom instead of the RUU.
topgun1953 said:
He said rez rom s4 2.5 ... He said he is on ICS firmware but I'm thinking he's still on GB and he may flashed a stock rom instead of the RUU.
Click to expand...
Click to collapse
That's what I'm thinking
The reason it would bootloop is the audio lib
So anything that produces a sound will cause a reboot
Is this the case cableguy?
Sent from my Rezound that finally has AOSP
My thinking was possible radio connectivity issues.
Sent from my ADR6425LVW using xda app-developers app
"The reason it would bootloop is the audio lib
So anything that produces a sound will cause a reboot
Is this the case cableguy?"
^^^ that sounds about right. the dialer and iheartradio will both cause a reboot!
"He said rez rom s4 2.5 ... He said he is on ICS firmware but I'm thinking he's still on GB and he may flashed a stock rom instead of the RUU"
^^^ also very possible! I believe it was this that I flashed initially: Vigor_Stock_Doedexed_3.14.605.5.zip ... so I guess you're right.
"Just out of curiosity, is your hboot showing you being on ics firmware, as it should?"
I attached a pic
thanx
cableguy1 said:
"The reason it would bootloop is the audio lib
So anything that produces a sound will cause a reboot
Is this the case cableguy?"
^^^ that sounds about right. the dialer and iheartradio will both cause a reboot!
"He said rez rom s4 2.5 ... He said he is on ICS firmware but I'm thinking he's still on GB and he may flashed a stock rom instead of the RUU"
^^^ also very possible! I believe it was this that I flashed initially: Vigor_Stock_Doedexed_3.14.605.5.zip ... so I guess you're right.
"Just out of curiosity, is your hboot showing you being on ics firmware, as it should?"
I attached a pic
thanx
Click to expand...
Click to collapse
Ah...now we see something...you have the latest ICS hboot, 2.25...but an older GB radio...not good to mix and match... So flash [ICS][2.25][JB][5-7]PH98IMG.zip
this file from http://www.androidfilehost.com/main/-Support_Files-/SuperChilPil/
This will flash the joupunut bear hboot and the latest radios... rename to ph98img.zip, boot into bootloader and let it flash. Be sure to delete, change name of the file after. This should work!
ps..if you have a nandroid of your last ICS rom ...give it a try if you want, it might work.
topgun1953 said:
Ah...now we see something...you have the latest ICS hboot, 2.25...but an older GB radio...not good to mix and match... So flash [ICS][2.25][JB][5-7]PH98IMG.zip
this file from http://www.androidfilehost.com/main/-Support_Files-/SuperChilPil/
This will flash the joupunut bear hboot and the latest radios... rename to ph98img.zip, boot into bootloader and let it flash. Be sure to delete, change name of the file after. This should work!
ps..if you have a nandroid of your last ICS rom ...give it a try if you want, it might work.
Click to expand...
Click to collapse
SOLVED!
thank you guys, top gun you're the man
I installed [ROM][Unofficial-AOKP] and while its nice some of the nuisances are frustrating. My previous phone was a DroidX so I could always just SBF back to stock no problems. But I am curious is there a way to go back to the an official ICS release by loading the PH98IMG.zip or whatever? I thought I heard once you went to an unofficial OTA you could never go back to pure stock if you were S-ON and I am okay with that I just want to get back to the last updated ICS that was available.
If I can just load the .zip what is the correct version and can someone point me to the download? Thanks.
You can go back to stock. You have to relock your bootloader by running "fastboot oem lock" from fastboot, and then reflash the stock RUU.
If you never updated past the Verizon OTA, you can get the 3.14.605.12 file from this site, rename it to PH98IMG.zip on your external SD, relock, and flash.
http://www.htcruu.com/?dir=Vigor
shrike1978 said:
You can go back to stock. You have to relock your bootloader by running "fastboot oem lock" from fastboot, and then reflash the stock RUU.
If you never updated past the Verizon OTA, you can get the 3.14.605.12 file from this site, rename it to PH98IMG.zip on your external SD, relock, and flash.
http://www.htcruu.com/?dir=Vigor
Click to expand...
Click to collapse
Cool, thanks.
You didn't make a nandroid backup of your existing rom before you installed a new rom? You should start if you didn't, that way if you installed a rom you end up not liking, you can just restore your previous one without needing to re-set up your phone all over again.
Stay root and flash Neo's simplistic 3.0 rom. It is a debloated version of the stock rom. It's not as smooth as jellybean but is about as stable as you can get.
Sent from my Rezound using Tapatalk 2
brenuga said:
Stay root and flash Neo's simplistic 3.0 rom. It is a debloated version of the stock rom. It's not as smooth as jellybean but is about as stable as you can get.
Sent from my Rezound using Tapatalk 2
Click to expand...
Click to collapse
So I found this thread and I haven't been to JellyBean on my Rezound yet. Currently running Hawks latest EclipticRez and Snuzzo's latest Kernel which is dope.
1) Can I just make a full Nandroid of my current rom, then flash Neo's Inception 2.5 to try out jellybean?
2) If I want to go back to ICS Sense, can I just restore my nandroid?
It seems that simple, but I dont want a brick and wanted to confirm that I can go back to ICS.
Thank you.
hole...
onthehole said:
So I found this thread and I haven't been to JellyBean on my Rezound yet. Currently running Hawks latest EclipticRez and Snuzzo's latest Kernel which is dope.
1) Can I just make a full Nandroid of my current rom, then flash Neo's Inception 2.5 to try out jellybean?
2) If I want to go back to ICS Sense, can I just restore my nandroid?
It seems that simple, but I dont want a brick and wanted to confirm that I can go back to ICS.
Thank you.
hole...
Click to expand...
Click to collapse
As long as you are S-OFF yes.
If you are S-on you'll have to reflash the boot.img of the ROM you started from/restore back to.
Sent from my ADR6425LVW using xda app-developers app
I am soff thanks.
Sent from my HTC Rezound.
okay so I read through some of the threads and I still don't know how to fix my issue. I rooted my phone using Odin v 1.85 and used siyah 3.4.2. I did it successfully and everything was good. I then gave the phone to my cousin and he said he performed a factory reset to get rid of everything on the phone ( contacts ,etc). Now when I turn on the phone it shows the samsung galaxy display with the triangle and then the screen goes black and just blinks. It still goes back into download mode I just dont know what to do to fix the problem. I know I'm a noob but please HELP!!!
Development section. You'll find the stickies that show how to flash stock packages with Odin. Go back to stock to fix your issue. You should then be able to load a new kernel and flash a custom rom.
Oh, and never let that cousin touch the phone again.
Sent from my SGH-I777 using xda premium
Red_81 said:
Development section. You'll find the stickies that show how to flash stock packages with Odin. Go back to stock to fix your issue. You should then be able to load a new kernel and flash a custom rom.
Oh, and never let that cousin touch the phone again.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Thank you! I went back to stock and everything seems to be back in order. I used
http://forum.xda-developers.com/showpost.php?p=18859438&postcount=199
to get back to stock. My question is can I flash a new Rom for example
http://forum.xda-developers.com/showthread.php?t=2076718
or ShoStock3??? thank you
mmoncay11 said:
Thank you! I went back to stock and everything seems to be back in order. I used
http://forum.xda-developers.com/showpost.php?p=18859438&postcount=199
to get back to stock. My question is can I flash a new Rom for example
http://forum.xda-developers.com/showthread.php?t=2076718
or ShoStock3??? thank you
Click to expand...
Click to collapse
You will need to root first. If you did not flash the stock plus root package already, flash that, and then install a custom kernel which has ClockworkMod Recovery. Then you can flash any firmware.
There is a good guide linked in my signature.
creepyncrawly said:
You will need to root first. If you did not flash the stock plus root package already, flash that, and then install a custom kernel which has ClockworkMod Recovery. Then you can flash any firmware.
There is a good guide linked in my signature.
Click to expand...
Click to collapse
Thanks. I Used "Odin3 One-click Downloader I-777 UCKH7 Stock + Root No Bootloaders" to go back to stock.
I'm going to install Mobile Odin lite, I already found the flash kernel for the I-777. After installing both of these I should be good to flash the ROM of my choice by just putting the rom on the sd card right?
mmoncay11 said:
Thanks. I Used "Odin3 One-click Downloader I-777 UCKH7 Stock + Root No Bootloaders" to go back to stock.
I'm going to install Mobile Odin lite, I already found the flash kernel for the I-777. After installing both of these I should be good to flash the ROM of my choice by just putting the rom on the sd card right?
Click to expand...
Click to collapse
Flash a kernel with ClockworkMod Recovery, then boot into recovery and flash the firmware. Mobile Odin can't handle the CWM flashable zip format.
There is a Siyah kernel for gingerbread that would give you CWM so you could then flash a custom rom. It would be in the development section. Just make sure you grab the version for gingerbread and not ics
Sent from my SGH-I777 using xda premium
Red_81 said:
There is a Siyah kernel for gingerbread that would give you CWM so you could then flash a custom rom. It would be in the development section. Just make sure you grab the version for gingerbread and not ics
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
oh okay have CWM now. So now I just go into recovery and flash the firmware correct?
Yep. Follow the directions of the rom you want to flash
Sent from my SGH-I777 using xda premium
hiartic the
Red_81 said:
Yep. Follow the directions of the rom you want to flash
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Thanks alot. Any Roms you recommend ?
I know this is pretty noobish but will backing up on the internal sd card cause any problems?
mmoncay11 said:
I know this is pretty noobish but will backing up on the internal sd card cause any problems?
Click to expand...
Click to collapse
I assume you mean nandroid backup from ClockworkMod Recovery? No. It's mainly a space issue, where you want to store them, because they take up quite a bit of space, especially if you have several.
mmoncay11 said:
Thanks alot. Any Roms you recommend ?
Click to expand...
Click to collapse
The general answer you will get around here is try them all. You can see what I like by looking in my signature.
I like both Shostock3 and the collective's rom. I don't think there is a bad rom on here.
Sent from my SGH-I777 using xda premium
mmoncay11 said:
Thanks alot. Any Roms you recommend ?
Click to expand...
Click to collapse
Depends on which OS version firmware you want.
I like Eclair and Froyo