Hello,
after flashing CyanogenMod 9 Resurrection Edition my Galaxy S2 wont turn on anymore.
However, there is this battery charging something if I plug in the usb cable but this thing crashes or something and that gets in a loop.
What shall I do now?
Need more information? - Just ask
Laberkopf
Edit: Works now.. I think I panicked too fast. Sorry for the inconvenience
Laberkopf said:
Hello,
after flashing CyanogenMod 9 Resurrection Edition my Galaxy S2 wont turn on anymore.
However, there is this battery charging something if I plug in the usb cable but this thing crashes or something and that gets in a loop.
What shall I do now?
Need more information? - Just ask
Laberkopf
Click to expand...
Click to collapse
Can you get into download mode?
Syrellaris said:
Can you get into download mode?
Click to expand...
Click to collapse
It is now. Dont know why it worked now oO
What shall I do next?
Edit: Works now.. I think I panicked too fast. Sorry for the inconvenience
No inconvenience mate
Remember. if you can get into download mode or recovery mode, then you can still fix your phone by restoing to original firmwares and stuff
Related
Recently i tried to install firmware on my Galaxy tab 10.1, but it resulted in a bootloop, and now i am on the samsung screen. I tried to install the firmware with mobil Odin. The firmware i used is P7510XEULPH_P7510XXLPH_HOME.tar. I dont know what to do to get my tab working again, because when i try to boot into the recovery, i get the flicker screen.
If anybody could help me i would greatly appreciate it.
Rogoshin said:
Recently i tried to install firmware on my Galaxy tab 10.1, but it resulted in a bootloop, and now i am on the samsung screen. I tried to install the firmware with mobil Odin. The firmware i used is P7510XEULPH_P7510XXLPH_HOME.tar. I dont know what to do to get my tab working again, because when i try to boot into the recovery, i get the flicker screen.
If anybody could help me i would greatly appreciate it.
Click to expand...
Click to collapse
Sounds like you soft brick your tab. Looks like your gonna need to whip out the PC and find PC version ODIN even though the screen stuck on flicker it will still connect well at least it did when I soft bricked my SGS 2. Well good luck guy I knw I had a few days of fun when I was trying to fix mine.
Oh ya one more important thing check in your device form in Q & A Chechen sticky always a lot of useful stuff or might even find a quick fix from fellow XDA fanatic like me.
Sent from my SGH-I777 Powered Pony AOPK JB ROM Stock
VICIOUSVIC1 said:
Sounds like you soft brick your tab. Looks like your gonna need to whip out the PC and find PC version ODIN even though the screen stuck on flicker it will still connect well at least it did when I soft bricked my SGS 2. Well good luck guy I knw I had a few days of fun when I was trying to fix mine.
Oh ya one more important thing check in your device form in Q & A Chechen sticky always a lot of useful stuff or might even find a quick fix from fellow XDA fanatic like me.
Sent from my SGH-I777 Powered Pony AOPK JB ROM Stock
Click to expand...
Click to collapse
To bad for me, i use Linux. My computer is now just flashing the Samsung logo, but what happens when it runs out of battery, and can i charge it like this?
Rogoshin said:
Recently i tried to install firmware on my Galaxy tab 10.1, but it resulted in a bootloop, and now i am on the samsung screen. I tried to install the firmware with mobil Odin. The firmware i used is P7510XEULPH_P7510XXLPH_HOME.tar. I dont know what to do to get my tab working again, because when i try to boot into the recovery, i get the flicker screen.
If anybody could help me i would greatly appreciate it.
Click to expand...
Click to collapse
Not sure if you are still stuck, but if you boot into recovery and then clear cache and user data it stopped the boot looping for me...
Rogoshin said:
what happens when it runs out of battery, and can i charge it like this?
Click to expand...
Click to collapse
In theory you can switch off the tab and plug it to charge. It should charge as you do not hard brick it. If you can slash your tab via Odin, try to flash it two times, one by one not letting it to boot android and samsung logo after the first flash. After the second flash, reboot and hold the volume - button till you get into stock recovery mode. then wipe data and wipe cash. then reboot again.
hi
I need help with my new Samsung galaxy Sii GT-i9100. the phone comes with a stock android gingerbread os. I was looking to upgrade to jellybean but Samsung kies keep failing to complete this due to an unknown error. I then began looking into a supernexus rom as a friend recommended it. after a day of fiddling and searching on the internet for a way to do this. I found a different forum that someone had the same problem with the same kernel as i have. the answer was to install a cm-root kernel. After booting into download mode i installed this kernel and then my phone diden't restart. it has continued to show no other sign of life even after charing.
please help
Kelvin:crying:
kelvin.m said:
hi
I need help with my new Samsung galaxy Sii GT-i9100. the phone comes with a stock android gingerbread os. I was looking to upgrade to jellybean but Samsung kies keep failing to complete this due to an unknown error. I then began looking into a supernexus rom as a friend recommended it. after a day of fiddling and searching on the internet for a way to do this. I found a different forum that someone had the same problem with the same kernel as i have. the answer was to install a cm-root kernel. After booting into download mode i installed this kernel and then my phone diden't restart. it has continued to show no other sign of life even after charing.
please help
Kelvin:crying:
Click to expand...
Click to collapse
First of all: next time use a proper title for a new thread, because this one isn't quite 'usefull'..
Now, you say your phone doesn't show a sign of life. Do you mean it wont boot? Or can you enter Download mode? If so, try to reflash the kernel, and make sure it's the right one. You could also flash official firmware via Odin, if you want to.
Sent from the Matrix
Donnie Sins said:
First of all: next time use a proper title for a new thread, because this one isn't quite 'usefull'..
Now, you say your phone doesn't show a sign of life. Do you mean it wont boot? Or can you enter Download mode? If so, try to reflash the kernel, and make sure it's the right one. You could also flash official firmware via Odin, if you want to.
Sent from the Matrix
Click to expand...
Click to collapse
sorry about the title i was panicking my new phone is not working.
the phone does not respond to any thing i tried charging it to see if the battery was dead but the phone just got hot. i can't get to download mode and just plugging the phone in and trying to re-flash the old kernel with Odin just says awaiting connection.
is the kernel bricked????????????????
kelvin.m said:
sorry about the title i was panicking my new phone is not working.
the phone does not respond to any thing i tried charging it to see if the battery was dead but the phone just got hot. i can't get to download mode and just plugging the phone in and trying to re-flash the old kernel with Odin just says awaiting connection.
is the kernel bricked????????????????
Click to expand...
Click to collapse
Sorry, I'm not an expert at this point. Search for threads about hard bricks, and possible solutions (or anyone else has to have a better answer). Good luck anyway.
Sent from the Matrix
First off, chill out.
Then read this and try some of the possible fixes.
If nothing works, come back and we'll tell you what to do so you can get a new phone claiming warranty.
gastonw said:
First off, chill out.
Then read this and try some of the possible fixes.
If nothing works, come back and we'll tell you what to do so you can get a new phone claiming warranty.
Click to expand...
Click to collapse
my phone will not enter recovery mode or download mode. it will not turn on at all.
If you've completely bricked your phone. ..
Take your Battery out of the phone and charge with external charger. ..
After that use a USB Jig(should get on ebay, isn't much expensive) to boot your phone into download mode and Flash the stock Rom using Odin...
If this doesn't work then going to the official Samsung store should be your move..
Press thanx if I helped...
Sent from my GT-I9100 using xda app-developers app
So here's the story, my friend gave me his wife's phone for me to fix it.
His wife rooted the phone and it was working fine until it didn't want to boot (According to my friend's story)
I tried going to download mode and recovery mode but, no luck.
It doesn't want to charge either. But, it did detect once my charger and booted up until here:
http://www.google.com.sa/imgres?img...986&page=7&start=121&ndsp=21&biw=1360&bih=657
Sorry, I'm not that familiar with s3, but I did own Note1 and 2. So I'm kinda new here at s3 forum.
Any help would be appreciated, thanks!
Without download mode there is nothing you can do, try a usb jig.
Sent from my GT-I9300 using Tapatalk
laziafbaito said:
So here's the story, my friend gave me his wife's phone for me to fix it.
His wife rooted the phone and it was working fine until it didn't want to boot (According to my friend's story)
I tried going to download mode and recovery mode but, no luck.
It doesn't want to charge either. But, it did detect once my charger and booted up until here:
http://www.google.com.sa/imgres?img...986&page=7&start=121&ndsp=21&biw=1360&bih=657
Sorry, I'm not that familiar with s3, but I did own Note1 and 2. So I'm kinda new here at s3 forum.
Any help would be appreciated, thanks!
Click to expand...
Click to collapse
Hi there,
Could be a battery :silly: issue try a diff battery this could happen when the battery get completely discharged
I flashed a rom to another model on my galaxy s2 and now it will not turn on, not in download mode and also with the usb jig no signs of life. do you know a way to fix it alternative assistance? sorry for my bad English.
rrrosy said:
I flashed a rom to another model on my galaxy s2 and now it will not turn on, not in download mode and also with the usb jig no signs of life. do you know a way to fix it alternative assistance? sorry for my bad English.
Click to expand...
Click to collapse
My guess is that you've already reinserted the battery? Seems like a dead s2. Did you try a new battery?
@rrrosy i doesnt sound good... I think you have hardbricked your phone since the rom for another phone probably wiped the bootloader etc.
The only existing way that I know left is to Jtag it.
Hi guys! I have a new Samsung Galaxy S6 Edge SM-G925F . It’s been with me for a week now and I’ve always took good care of it. No water damage, it wasn’t dropped or something. 3 hours ago , it turned off on its own and when I tried to turn it on, nothing happened. I’m freaking out now because I don’t know what to do so if you could just help me with it, I would surely appreciate it.
FadiNasan said:
Hi guys! I have a new Samsung Galaxy S6 Edge SM-G925F . It’s been with me for a week now and I’ve always took good care of it. No water damage, it wasn’t dropped or something. 3 hours ago , it turned off on its own and when I tried to turn it on, nothing happened. I’m freaking out now because I don’t know what to do so if you could just help me with it, I would surely appreciate it.
Click to expand...
Click to collapse
When you plug it in does the red LED light up? If so, not all is lost. If it does not, your phone is likely broken.
Snowby123 said:
When you plug it in does the red LED light up? If so, not all is lost. If it does not, your phone is likely broken.
Click to expand...
Click to collapse
It worked normally after a couple of hours .. but i dont know what the problem is ..
FadiNasan said:
It worked normally after a couple of hours .. but i dont know what the problem is ..
Click to expand...
Click to collapse
Try booting into other modes such as download mode.
If you can get into download mode,
you can install the stock firmware to unbrick by following this link
http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
An unresponsive phone is not fun to have.
Snowby123 said:
Try booting into other modes such as download mode.
If you can get into download mode,
you can install the stock firmware to unbrick by following this link
http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
An unresponsive phone is not fun to have.
Click to expand...
Click to collapse
it's android 5.0.2 ??
FadiNasan said:
it's android 5.0.2 ??
Click to expand...
Click to collapse
That thread gives links to 5.0.2, but you can download 5.1.1 from sammobile