It's stuck on the galaxy s3 logo screen. I have to restore back to omega v9. I have tried wiping partition etc but it still doesnt work. Help me please!
steps and u have. gt i9300? or other one?
Sent from my GT-I9300 using xda premium
1. Downloaded v9.1
2.went to cwm recovery and wipe partition
3.Flash v9.1 through cwm recovery
4. Pressed default installation
After it reboots, it's stuck on the logo screen (Galaxy s3 logo)
I have the international version.
Try setting of the mobile and see if you can get into download mode
Sent from my GT-I9300 using xda app-developers app
1315wen said:
It's stuck on the galaxy s3 logo screen. I have to restore back to omega v9. I have tried wiping partition etc but it still doesnt work. Help me please!
Click to expand...
Click to collapse
Didn`t you make a nandroid backup before flashing another rom?
If so restore that, if not wipe data/factory, wipe cache and dalvik cache and reflash the omega rom.
If that doesn`t work, flash a stock rom with Odin and reroot.
This reads like the file you are flashing is faulty .
jje
omega v9.1 is no wipe then y u wipe partition?? its always better to do wip data\sytem ,wipe cache ,dalvik
Related
Hi,
I wanted to flash a new rom: http://forum.xda-developers.com/showthread.php?t=1460702
I copied the zip file on my external SD
made wipe data/factory reset
wipe chace
and wipe dalvik
then installed from zip file.
But when rebooting the S2 freezes on the first bootscreen with the yellow triangle. I forgot to turn on debugging mode bevore wiping. Is that the prob?
What can I do now? Tryed also other roms. Installation successfull but always freeze after reboot.
Wrong forum. LOLOLOLOLOL.
Sent from my SGH-T999 using xda premium
T4mpon said:
Hi,
But when rebooting the S2 freezes
Click to expand...
Click to collapse
You are in the Galaxy S3 forum.
Ian
i installed the ink effect for s3 and i have 4.1.2 JB
i have done what in this video
http://www.youtube.com/watch?v=tBf8HxYjkqI and after restart my S3 stuck in samsung boot screen
what i have 2 do now (
plz help me
m7md_k9 said:
i installed the ink effect for s3 and i have 4.1.2 JB
i have done what in this video
http://www.youtube.com/watch?v=tBf8HxYjkqI and after restart my S3 stuck in samsung boot screen
what i have 2 do now (
plz help me
Click to expand...
Click to collapse
Boot to recovery and select wipe cache partition, then advanced and wipe Dalvik, then reboot.
If that doesn't solve it again in recovery wipe data/factory reset, and if that one doesn't work restore the backup you (should have) made before flashing the mod. If you have no backup flash a new ROM, either custom via recovery or stock via Odin will work.
My samsung galaxy s 2 i9100 is stuck on the boot logo after I tried to install the note 2's multi-window feature. I figured out later that my rom was not compatible with it.
I am able to get into download mode and recovery mode but whenever I try to flash a new rom or reboot it just reboots for a while and then freezes..... I have been trying to fix it all day with no luck at all.. Please please help.
Btw my phone was running the 'revolt jb' rom.
You need to "Wipe data/factory reset" in cwm recovery. Then if you want flash new rom.
However if you need to backup apps/appdata then make a nandroid backup and then use appextractor on new rom to restore apps from the nandroid backup.
Samsung Galaxy S II i9100 stuck on boot logo
I already did a factory reset in cwm but I don't have any other roms to flash!! How can I get another rom onto my phone?? I am not concerned about saving any of my apps.
Stephen_ said:
How can I get another rom onto my phone??
Click to expand...
Click to collapse
Don't start flashing if you don't even know the basics!
Sent from my digital submersible hovercraft.
Samsung Galaxy S II stuck on boot logo
f-r said:
Don't start flashing if you don't even know the basics!
Sent from my digital submersible hovercraft.
Click to expand...
Click to collapse
I do know the basics, I am just not able to use my phone to download any roms onto it.
Remove the sdcard and copy the ROM on it using your PC, and flash with CWM.
Or use Odin.
Sent from my digital submersible hovercraft.
You should follow the exact instructions..
Try to wipe data,
then install rom
Wipe dalvik
Wipe cache
Sent from my GT-I9100 using xda app-developers app
diko adrian said:
You should follow the exact instructions..
Try to wipe
Wipe dalvik
Wipe cache
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your help but I managed to restore to stock ROM with Odin.
U can install custom roms from odin,too..
Sent from my GT-I9100 using xda app-developers app
Facing a Similar Problem
Stuck at samsung logo
running on siyah kernel v6.5b on Samsung galaxy s2 jb 4.1.2 build XWLST
tried to install alliance mod rom v8 and ended up at Samsung logo because of the incapable build versions.
tried factory reset and also the wipe cache partition dint work, erased the dalvik cache too
plus tried factory reset and install a fresh stock rom from odin but just gets hung and task manager marks it as not responding.what do i do now??
I have access to root..
Have i Bricked this phone??
Hello, I have a samsung galaxy s2 with JB XXLS8 Italy, now with the CWM I install Neat Rom, I go to the recovery, I did wipe cache and wipe dalvik and I flash, now my s2 repeat the boot logo "samsung". Help me..
flyd00 said:
Hello, I have a samsung galaxy s2 with JB XXLS8 Italy, now with the CWM I install Neat Rom, I go to the recovery, I did wipe cache and wipe dalvik and I flash, now my s2 repeat the boot logo "samsung". Help me..
Click to expand...
Click to collapse
which kernel?? if it's philz based on ls8 then you have to nuke your rom and install it again
arshu16 said:
which kernel?? if it's philz based on ls8 then you have to nuke your rom and install it again
Click to expand...
Click to collapse
Now when I enter in recovery I have PhilZ Touch 4. Do I install the rom again?
Clear both caches, reboot.
Sent from my digital submersible hovercraft.
Did you wipe system/data before flashing?
Rom nuke means you have to fully format the system and data..
You can use hawker's gs2romwipe script and install the rom again..
After that install Philz 4.35 LSJ till the devs fix that bootloop bug..
This will solve your bootloop issue...
Sent from my GT-I9100 using xda premium
arshu16 said:
Rom nuke means you have to fully format the system and data..
You can use hawker's gs2romwipe script and install the rom again..
After that install Philz 4.35 LSJ till the devs fix that bootloop bug..
This will solve your bootloop issue...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Re-wipe brush rom, so that you will be able to solve the problem
Help ! I Flashed CM12 and it worked good , but after some days i wanted to go back to stock ROM (KitKat 4.4.2) i tried to flash it with Odin3 everything went well .. i wiped data/factory reset , wiped Cache partition , wiped dalvik cache but im still stuck at Samsung logo Help Me pleasee
Bassel Atef said:
Help ! I Flashed CM12 and it worked good , but after some days i wanted to go back to stock ROM (KitKat 4.4.2) i tried to flash it with Odin3 everything went well .. i wiped data/factory reset , wiped Cache partition , wiped dalvik cache but im still stuck at Samsung logo Help Me pleasee
Click to expand...
Click to collapse
don't flash odin stock package over custom rom directly. do wip data/factory reset before flashing odin rom. the first boot will take several minutes so be patient.
don't forget to use last odin version 3.09 or 3.10
I Did and i formated my internal storge before using Odin3 and wiped data / factory reset and wiped Cache Partition and Dalvik Cache before and after using Odin3 but still stuck at Samsung logo help me please
Bassel Atef said:
I Did and i formated my internal storge before using Odin3 and wiped data / factory reset and wiped Cache Partition and Dalvik Cache before and after using Odin3 but still stuck at Samsung logo help me please
Click to expand...
Click to collapse
are you sur that you flash the correct firmeware. i think there is several galaxy s3 neo models. so cheek if it is correct firmeware. or just maybe your firmeware that you flash is damaged.
also you can cheek " nand erase all " option in odin . after flash is complette go to recovery and wip cache an factory reset (compulsory).