Hi,
I wanted to flash a new rom: http://forum.xda-developers.com/showthread.php?t=1460702
I copied the zip file on my external SD
made wipe data/factory reset
wipe chace
and wipe dalvik
then installed from zip file.
But when rebooting the S2 freezes on the first bootscreen with the yellow triangle. I forgot to turn on debugging mode bevore wiping. Is that the prob?
What can I do now? Tryed also other roms. Installation successfull but always freeze after reboot.
Wrong forum. LOLOLOLOLOL.
Sent from my SGH-T999 using xda premium
T4mpon said:
Hi,
But when rebooting the S2 freezes
Click to expand...
Click to collapse
You are in the Galaxy S3 forum.
Ian
Related
It's stuck on the galaxy s3 logo screen. I have to restore back to omega v9. I have tried wiping partition etc but it still doesnt work. Help me please!
steps and u have. gt i9300? or other one?
Sent from my GT-I9300 using xda premium
1. Downloaded v9.1
2.went to cwm recovery and wipe partition
3.Flash v9.1 through cwm recovery
4. Pressed default installation
After it reboots, it's stuck on the logo screen (Galaxy s3 logo)
I have the international version.
Try setting of the mobile and see if you can get into download mode
Sent from my GT-I9300 using xda app-developers app
1315wen said:
It's stuck on the galaxy s3 logo screen. I have to restore back to omega v9. I have tried wiping partition etc but it still doesnt work. Help me please!
Click to expand...
Click to collapse
Didn`t you make a nandroid backup before flashing another rom?
If so restore that, if not wipe data/factory, wipe cache and dalvik cache and reflash the omega rom.
If that doesn`t work, flash a stock rom with Odin and reroot.
This reads like the file you are flashing is faulty .
jje
omega v9.1 is no wipe then y u wipe partition?? its always better to do wip data\sytem ,wipe cache ,dalvik
I did everything I was supposed to do, first succesfully rooted the phone. Then I put the zip file with the rom into the sd card and then went into recovery mode, installed file from zip and it said success in install so I chose to reobot and now it hangs there... Any one can help me out? I'm scared...
badaboom423 said:
I did everything I was supposed to do, first succesfully rooted the phone. Then I put the zip file with the rom into the sd card and then went into recovery mode, installed file from zip and it said success in install so I chose to reobot and now it hangs there... Any one can help me out? I'm scared...
Click to expand...
Click to collapse
A bit more details. What phone model? What were you trying to flash? Where does it hang, on the Samsung boot animation, or in the recovery?
Sent from my GT-I9100 using Tapatalk 2
Galaxy s2 international (gt 19100). It hangs on the boot logo, which now is a yin yang with ics on it, I guess this is a NEAT thing. I can go into recovery mode, it just hangs if I try to boot normally.
badaboom423 said:
Galaxy s2 international (gt 19100). It hangs on the boot logo, which now is a yin yang with ics on it, I guess this is a NEAT thing. I can go into recovery mode, it just hangs if I try to boot normally.
Click to expand...
Click to collapse
The yin yang boot logo is actually the kernel. (Siyah)
You should probably try a factory reset/wipe data from recovery. This will alleviate 90% of boot loops and stuck on boot issues.
How do I do that?
badaboom423 said:
How do I do that?
Click to expand...
Click to collapse
You just said above you can boot to recovery... Once you are in recovery mode, can you not follow the recovery menu system to find the wipe data/factory reset option? It should be pretty straightforward.
I'm not running Siyah, so I don't know what the exact menu item is called in the recovery image that is in that kernel.
I tried that but it still does the same thing... any other tips?
badaboom423 said:
I tried that but it still does the same thing... any other tips?
Click to expand...
Click to collapse
Actually, let's take a couple steps back.
What model phone do you have? It's printed on the label under your battery.
it says model GT-i9100
ssn i9100GSMH
badaboom423 said:
it says model GT-i9100
ssn i9100GSMH
Click to expand...
Click to collapse
Ok. Are you SURE you're doing a wipe data/factory reset when in recovery? If so, then I'd flash a stock firmware, full wipe again, then try the Neat ROM install again.
ctomgee said:
Ok. Are you SURE you're doing a wipe data/factory reset when in recovery? If so, then I'd flash a stock firmware, full wipe again, then try the Neat ROM install again.
Click to expand...
Click to collapse
Well I'm going into recovery mode and clicking on the option that says wipe data/ factory reset... How would I install the stock firmware if I can't get past the boot screen?
What recovery u using ? CWM ?
Sent from my GT-I9100 using xda app-developers app
CWMR Touch v5.5.0.4
badaboom423 said:
Well I'm going into recovery mode and clicking on the option that says wipe data/ factory reset... How would I install the stock firmware if I can't get past the boot screen?
Click to expand...
Click to collapse
Find all you need to know here.
As an easy rule before installing any new ROM (that isn't an upgrade from a previous version ex. Cm10 builds or if otherwise stated ) wipe data , cache and dalvik cache , which is under advanced
badaboom423 said:
Well I'm going into recovery mode and clicking on the option that says wipe data/ factory reset... How would I install the stock firmware if I can't get past the boot screen?
Click to expand...
Click to collapse
Try
Go to recovery
wipe data
wipe cache
advanced/wipe dalvik cache
go back
mounts and storage
format system
format data
format cache
go back
install rom
My samsung galaxy s 2 i9100 is stuck on the boot logo after I tried to install the note 2's multi-window feature. I figured out later that my rom was not compatible with it.
I am able to get into download mode and recovery mode but whenever I try to flash a new rom or reboot it just reboots for a while and then freezes..... I have been trying to fix it all day with no luck at all.. Please please help.
Btw my phone was running the 'revolt jb' rom.
You need to "Wipe data/factory reset" in cwm recovery. Then if you want flash new rom.
However if you need to backup apps/appdata then make a nandroid backup and then use appextractor on new rom to restore apps from the nandroid backup.
Samsung Galaxy S II i9100 stuck on boot logo
I already did a factory reset in cwm but I don't have any other roms to flash!! How can I get another rom onto my phone?? I am not concerned about saving any of my apps.
Stephen_ said:
How can I get another rom onto my phone??
Click to expand...
Click to collapse
Don't start flashing if you don't even know the basics!
Sent from my digital submersible hovercraft.
Samsung Galaxy S II stuck on boot logo
f-r said:
Don't start flashing if you don't even know the basics!
Sent from my digital submersible hovercraft.
Click to expand...
Click to collapse
I do know the basics, I am just not able to use my phone to download any roms onto it.
Remove the sdcard and copy the ROM on it using your PC, and flash with CWM.
Or use Odin.
Sent from my digital submersible hovercraft.
You should follow the exact instructions..
Try to wipe data,
then install rom
Wipe dalvik
Wipe cache
Sent from my GT-I9100 using xda app-developers app
diko adrian said:
You should follow the exact instructions..
Try to wipe
Wipe dalvik
Wipe cache
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your help but I managed to restore to stock ROM with Odin.
U can install custom roms from odin,too..
Sent from my GT-I9100 using xda app-developers app
Facing a Similar Problem
Stuck at samsung logo
running on siyah kernel v6.5b on Samsung galaxy s2 jb 4.1.2 build XWLST
tried to install alliance mod rom v8 and ended up at Samsung logo because of the incapable build versions.
tried factory reset and also the wipe cache partition dint work, erased the dalvik cache too
plus tried factory reset and install a fresh stock rom from odin but just gets hung and task manager marks it as not responding.what do i do now??
I have access to root..
Have i Bricked this phone??
Hello, I have a samsung galaxy s2 with JB XXLS8 Italy, now with the CWM I install Neat Rom, I go to the recovery, I did wipe cache and wipe dalvik and I flash, now my s2 repeat the boot logo "samsung". Help me..
flyd00 said:
Hello, I have a samsung galaxy s2 with JB XXLS8 Italy, now with the CWM I install Neat Rom, I go to the recovery, I did wipe cache and wipe dalvik and I flash, now my s2 repeat the boot logo "samsung". Help me..
Click to expand...
Click to collapse
which kernel?? if it's philz based on ls8 then you have to nuke your rom and install it again
arshu16 said:
which kernel?? if it's philz based on ls8 then you have to nuke your rom and install it again
Click to expand...
Click to collapse
Now when I enter in recovery I have PhilZ Touch 4. Do I install the rom again?
Clear both caches, reboot.
Sent from my digital submersible hovercraft.
Did you wipe system/data before flashing?
Rom nuke means you have to fully format the system and data..
You can use hawker's gs2romwipe script and install the rom again..
After that install Philz 4.35 LSJ till the devs fix that bootloop bug..
This will solve your bootloop issue...
Sent from my GT-I9100 using xda premium
arshu16 said:
Rom nuke means you have to fully format the system and data..
You can use hawker's gs2romwipe script and install the rom again..
After that install Philz 4.35 LSJ till the devs fix that bootloop bug..
This will solve your bootloop issue...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Re-wipe brush rom, so that you will be able to solve the problem
Hello Everyone.
My Galaxy S3 GT-i9300 got stuck at boot on samsung galaxy SIII logo, and i cant get it to start.
The phone is rooted. i can get into recovery mode twrp.
i tried Wipe dalvik and cach and format also, it all didnt work.
i connected the phone to pc to flash through odin but doesnt detect it.
can anyone please help?
Do a full wipe, man! Wipe data + wipe dalvik & cache
Faaeq said:
Hello Everyone.
My Galaxy S3 GT-i9300 got stuck at boot on samsung galaxy SIII logo, and i cant get it to start.
The phone is rooted. i can get into recovery mode twrp.
i tried Wipe dalvik and cach and format also, it all didnt work.
i connected the phone to pc to flash through odin but doesnt detect it.
can anyone please help?
Click to expand...
Click to collapse
If you have access to Recovery flash a rom directly from the recovery.
Sent from my GT-I9300 using XDA Free mobile app