I tired to install a rom on to my samsung GT I9300 s3 and I must of done something wrong, now my phone wont go pass the boot logo screen , I have wiped the dalvik cache, wipe cache, wipe user data/ factory reset using CWM but it still doesnt work. Im from the uk on network o2.
any help is much appreciated.
Thank you
kingjamin said:
I tired to install a rom on to my samsung GT I9300 s3 and I must of done something wrong, now my phone wont go pass the boot logo screen , I have wiped the dalvik cache, wipe cache, wipe user data/ factory reset using CWM but it still doesnt work. Im from the uk on network o2.
any help is much appreciated.
Thank you
Click to expand...
Click to collapse
Give us more details on what you have done exactly before you flash the rom.
And details about which rom.
One solution would be to flash stock.
Go in download mode with 3 buttons combo(volume down-power and home button) open odin,put as pda the stock rom as a tar and hit start.
Note: Be sure kies tray agent is not running in the background you have to kill the process with task manager
I also have this issue, after using a CM9 rom then rolling back to stock rom I have downloaded the stock rom, not sure if its 100 match for my phone but its stuck at samsung logo its 1 day old, please help?
Thanks
get into download mode and try flash again.
Right, I can go back to custom rom, but stock rom wont boot, any suggestions?
please try to elaborate the exact steps that you have done to get to that situation.
if you are now flashing back to stock rom. try this, flash stock firmware using odin, once done dont reboot. straigth boot into recovery mode, and wipe data factory reset. then boot.
ive got the same problem. i installed cyanogenmod 10 on and it worked fine but couldnt get to wipe the internal sd card so still had stuff from past roms on. I thought if i flash back to stock then it would clear it all then i could reflash back to cyanogen 10.
i flashed the stock in odin and it wont go past the samsung logo. cant get into the recovery mode to wipe cache as it just resets back to boot screen and cant use the samsung toolkit as i cant get into usb debugging mode as cant get it to boot
any help really appreciated
matt
kingjamin said:
I tired to install a rom on to my samsung GT I9300 s3 and I must of done something wrong, now my phone wont go pass the boot logo screen , I have wiped the dalvik cache, wipe cache, wipe user data/ factory reset using CWM but it still doesnt work. Im from the uk on network o2.
any help is much appreciated.
Thank you
Click to expand...
Click to collapse
I had this issue before. Phone is stuck at samsung logo. I reflashed stock lfb firmware and cf root. Cleared data/cache/dalvik. Then it worked fine.
If every recovery method fails then only resort is to visit service center, go there and act dumb and state phone went crazy and this happened out of no where.If they wont find out that you've f***ked it up then you will get mo-board replacement.
Flash stock LFB from samfirmware.com through Odin.
Then flash Siyahkernel (also through Odin)
Pull the battery for 5 minutes
Press and hold vol-up + home buton
Press power button until screen lights up
You should be in cwm now. Factoryreset your phone and it should startup again
If you don't want to loose your data, instead of factory reset you can try using adb shell and run e2fsck on the block device for /data
Corrupt ext-Partitions are usually the reason for a softbrick
Sent from my GT-I9300 using xda premium
Try rooting it again
Sent from my GT-I9300 using xda app-developers app
d4fseeker said:
Flash stock LFB from samfirmware.com through Odin.
Then flash Siyahkernel (also through Odin)
Pull the battery for 5 minutes
Press and hold vol-up + home buton
Press power button until screen lights up
You should be in cwm now. Factoryreset your phone and it should startup again
If you don't want to loose your data, instead of factory reset you can try using adb shell and run e2fsck on the block device for /data
Corrupt ext-Partitions are usually the reason for a softbrick
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
This works, thank you!
iptelesys said:
This works, thank you!
Click to expand...
Click to collapse
I too am having this issue! Which stock LFB should I use? Under country the latest is Hungarian! Does that mean all my stuff will be in hungarian? Please let me know as I need to use my phone tomorrow at the latest!
Thanks,
Inous
Yiu can flash that. Just change language to English
Sent from my GT-I9300 using xda app-developers app
solution to a bricked S3
Sent from my GT-I9300 using xda app-developers app[/QUOTE]
I encountered the same problem. I almost fainted when I can't solve the problem. Finally I did. this is what I did:
1. download the Stock Rom (depends which country and carrier you are) Unzip the downloaded file and you should have .md5 file that you will later use.
2. download ODIN
3. Launch ODIN click on "PDA button" select the .md5 that you extracted (the file you downloaded and unzipped) and click start and wait until it finished (hopefully this will solve your problem but in my case ... the samsung logo still is stucked so continue with my next steps)
4. download the CF Root from
note: this will install the CWM or recovery mode for your phone that will give you several options ...
5. use ODIN again and click PDA button and select the CF Root that you have downloaded and click on start until it finished.
6. boot to Recovery mode by holding "volume up (yes volume up and not volume down)" and "power" and "home button" all at the same time until recovery mode reappears.
7. go to advanced and remove dalvik cache, do a wipe out or factory reset, wait for your phone to restart ... wait a minute or two and your phone is back to normal.
Ignore
Sent from my GT-I9300 using xda premium
fergusso said:
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I encountered the same problem. I almost fainted when I can't solve the problem. Finally I did. this is what I did:
1. download the Stock Rom (depends which country and carrier you are) Unzip the downloaded file and you should have .md5 file that you will later use.
2. download ODIN
3. Launch ODIN click on "PDA button" select the .md5 that you extracted (the file you downloaded and unzipped) and click start and wait until it finished (hopefully this will solve your problem but in my case ... the samsung logo still is stucked so continue with my next steps)
4. download the CF Root from
note: this will install the CWM or recovery mode for your phone that will give you several options ...
5. use ODIN again and click PDA button and select the CF Root that you have downloaded and click on start until it finished.
6. boot to Recovery mode by holding "volume up (yes volume up and not volume down)" and "power" and "home button" all at the same time until recovery mode reappears.
7. go to advanced and remove dalvik cache, do a wipe out or factory reset, wait for your phone to restart ... wait a minute or two and your phone is back to normal.[/QUOTE]
THANKS A MILLION DUDE!
really sorry =$
it worked!!!! thank you so much!!!!
d4fseeker said:
Flash stock LFB from samfirmware.com through Odin.
Then flash Siyahkernel (also through Odin)
Pull the battery for 5 minutes
Press and hold vol-up + home buton
Press power button until screen lights up
You should be in cwm now. Factoryreset your phone and it should startup again
If you don't want to loose your data, instead of factory reset you can try using adb shell and run e2fsck on the block device for /data
Corrupt ext-Partitions are usually the reason for a softbrick
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
My galaxy y stuck on samsung galaxy y logo and cant mount data
MY rom isHyperion 7 Golden Master Final custom ROM for galaxy y GT-s5360.When I try to use the live wallpaper of hyperion 7 my galaxy y hangs and i try to pull the battery then i turn on but its stuck in samsung galaxy y logo then i used the recovery mode wipe data but it still nothing
plzzzz help me
alimocs said:
MY rom isHyperion 7 Golden Master Final custom ROM for galaxy y GT-s5360.When I try to use the live wallpaper of hyperion 7 my galaxy y hangs and i try to pull the battery then i turn on but its stuck in samsung galaxy y logo then i used the recovery mode wipe data but it still nothing
plzzzz help me
Click to expand...
Click to collapse
this is not a Galaxy Y forum, but you can try a different rom. Cheers.
It's stuck on the galaxy s3 logo screen. I have to restore back to omega v9. I have tried wiping partition etc but it still doesnt work. Help me please!
steps and u have. gt i9300? or other one?
Sent from my GT-I9300 using xda premium
1. Downloaded v9.1
2.went to cwm recovery and wipe partition
3.Flash v9.1 through cwm recovery
4. Pressed default installation
After it reboots, it's stuck on the logo screen (Galaxy s3 logo)
I have the international version.
Try setting of the mobile and see if you can get into download mode
Sent from my GT-I9300 using xda app-developers app
1315wen said:
It's stuck on the galaxy s3 logo screen. I have to restore back to omega v9. I have tried wiping partition etc but it still doesnt work. Help me please!
Click to expand...
Click to collapse
Didn`t you make a nandroid backup before flashing another rom?
If so restore that, if not wipe data/factory, wipe cache and dalvik cache and reflash the omega rom.
If that doesn`t work, flash a stock rom with Odin and reroot.
This reads like the file you are flashing is faulty .
jje
omega v9.1 is no wipe then y u wipe partition?? its always better to do wip data\sytem ,wipe cache ,dalvik
Hi,
I wanted to flash a new rom: http://forum.xda-developers.com/showthread.php?t=1460702
I copied the zip file on my external SD
made wipe data/factory reset
wipe chace
and wipe dalvik
then installed from zip file.
But when rebooting the S2 freezes on the first bootscreen with the yellow triangle. I forgot to turn on debugging mode bevore wiping. Is that the prob?
What can I do now? Tryed also other roms. Installation successfull but always freeze after reboot.
Wrong forum. LOLOLOLOLOL.
Sent from my SGH-T999 using xda premium
T4mpon said:
Hi,
But when rebooting the S2 freezes
Click to expand...
Click to collapse
You are in the Galaxy S3 forum.
Ian
My samsung galaxy s 2 i9100 is stuck on the boot logo after I tried to install the note 2's multi-window feature. I figured out later that my rom was not compatible with it.
I am able to get into download mode and recovery mode but whenever I try to flash a new rom or reboot it just reboots for a while and then freezes..... I have been trying to fix it all day with no luck at all.. Please please help.
Btw my phone was running the 'revolt jb' rom.
You need to "Wipe data/factory reset" in cwm recovery. Then if you want flash new rom.
However if you need to backup apps/appdata then make a nandroid backup and then use appextractor on new rom to restore apps from the nandroid backup.
Samsung Galaxy S II i9100 stuck on boot logo
I already did a factory reset in cwm but I don't have any other roms to flash!! How can I get another rom onto my phone?? I am not concerned about saving any of my apps.
Stephen_ said:
How can I get another rom onto my phone??
Click to expand...
Click to collapse
Don't start flashing if you don't even know the basics!
Sent from my digital submersible hovercraft.
Samsung Galaxy S II stuck on boot logo
f-r said:
Don't start flashing if you don't even know the basics!
Sent from my digital submersible hovercraft.
Click to expand...
Click to collapse
I do know the basics, I am just not able to use my phone to download any roms onto it.
Remove the sdcard and copy the ROM on it using your PC, and flash with CWM.
Or use Odin.
Sent from my digital submersible hovercraft.
You should follow the exact instructions..
Try to wipe data,
then install rom
Wipe dalvik
Wipe cache
Sent from my GT-I9100 using xda app-developers app
diko adrian said:
You should follow the exact instructions..
Try to wipe
Wipe dalvik
Wipe cache
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your help but I managed to restore to stock ROM with Odin.
U can install custom roms from odin,too..
Sent from my GT-I9100 using xda app-developers app
Facing a Similar Problem
Stuck at samsung logo
running on siyah kernel v6.5b on Samsung galaxy s2 jb 4.1.2 build XWLST
tried to install alliance mod rom v8 and ended up at Samsung logo because of the incapable build versions.
tried factory reset and also the wipe cache partition dint work, erased the dalvik cache too
plus tried factory reset and install a fresh stock rom from odin but just gets hung and task manager marks it as not responding.what do i do now??
I have access to root..
Have i Bricked this phone??
Ok here's the problem. I rooted my phone the new Galaxy Centura from Straight Talk. I then proceeded to wipe the Dalvik Cache. When I was looking at the other sections in recovery, I ended up in the system format. I really didn't mean too but I did format the system. My phone will still go into download and recovery modes and the Samsung image still shows up but nothing else. Is there a way to fix it? I have to know. Please help. I need it desperately.:crying:
At this point you should flash a custom ROM through recovery or if needed use hiemdall or Odin to return to stock in download mode
Sent from my Nexus 4 using Tapatalk 2
DesiDCooley29 said:
Ok here's the problem. I rooted my phone the new Galaxy Centura from Straight Talk. I then proceeded to wipe the Dalvik Cache. When I was looking at the other sections in recovery, I ended up in the system format. I really didn't mean too but I did format the system. My phone will still go into download and recovery modes and the Samsung image still shows up but nothing else. Is there a way to fix it? I have to know. Please help. I need it desperately.:crying:
Click to expand...
Click to collapse
Just (also wipe data), download some ROM for Your device and flash it via CWM.
Or You can always download ROM for Your device from here and flash it via odin. It's the easiest way to fix it