Hi there, I am using Omega V9.0 with SiyahKernel S3 v1.3.8 and the app EdTweaks. But I can not get hoger than 1.6MHz. I read the specs and it said steps to 1.8GHz with the SiyahKernel S3 v1.3.8.
Is it somewhere hidden?
You need more voltage, but take care.
Enviado pelo meus dedos
Use Voltage Control or similar from the Play Store.
Sent from my GT-I9300 using xda premium
sxi200 said:
Use Voltage Control or similar from the Play Store.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
But I don`t know what settings for the voltage to get 1.8MHz?
I overclocked my calculator the other day. I got 1,9 MHz. Crazy.
My phone does 1,8 GHz
master64nl said:
But I don`t know what settings for the voltage to get 1.8MHz?
Click to expand...
Click to collapse
Hi,
For the 1.8Ghz slot the voltage is 1450mV, try by 25mV steps...
But I don't know the "tolerance" of maximum voltage, in my opinion don't go above 1500mV.
Maybe your CPU can't handle 1.8Ghz, if it's like some other phones, some can handle higher overclock, others can't...
You can use SetCpu, mostly don't set anything at boot...
EDIT:Re reading the OP..., in fact you do not see the 1.8Ghz slot???
Guys I think he is asking why you cannot OC higher than 1600mhz in extweaks.
I don't know whh that happens but you can use setcpu to OC to 1800mhz.
Sent from my GT-I9300 using xda premium
nodstuff said:
Guys I think he is asking why you cannot OC higher than 1600mhz in extweaks.
I don't know whh that happens but you can use setcpu to OC to 1800mhz.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hi,
That's what I thought after thought , thanks.
It's right in ExTweaks there is not the 1.7/1.8Ghz slots
So you can use SetCpu, the 1.7Ghz and 1.8Ghz slots are present.
Originally Posted by sxi200
Use Voltage Control or similar from the Play Store.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
But I don`t know what settings for the voltage to get 1.8MHz?
Click to expand...
Click to collapse
Voltage control will override the extweaks settings and sets the voltage according to your oc selection. Just open it and set to 1.8. If all is well you can set it at boot. If nit just reboot and reset but increase the voltage.
You can also check to see what it's running using CPU spy.
Sent from my GT-I9300 using xda premium
victorator said:
I overclocked my calculator the other day. I got 1,9 MHz. Crazy.
My phone does 1,8 GHz
Click to expand...
Click to collapse
:laugh: I mean 1.8GHz :laugh:
nodstuff said:
Guys I think he is asking why you cannot OC higher than 1600mhz in extweaks.
I don't know whh that happens but you can use setcpu to OC to 1800mhz.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Yes, that what I ment :good:
Thanks everyone for thinking with me.
sxi200 said:
Voltage control will override the extweaks settings and sets the voltage according to your oc selection. Just open it and set to 1.8. If all is well you can set it at boot. If nit just reboot and reset but increase the voltage.
You can also check to see what it's running using CPU spy.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
But in ExTweaks there is no CPU slot for 1.7 or 1.8GHz. Only 1.6GHz. It has CPU undervolting. Is standard on NO.
But you can override GPU voltages levels. I don`t know how to use these or does it effect on the CPU?
I have use the app CPU Master of AnTuTu. Here there is a 1.8HHz slot but after rebooting and after a benchmark it is still 1.6GHz???
Perhaps I have to use the app SetCPU.
In Cpu Master have you tick set on boot?
Maybe a bit risky to 1.8Ghz unless you have tested this frequency for a long time and all is fine.
In any case with SetCpu the CPU freq remains after reboot.
And this is what I said, in ExTweaks there is not 1.7 and 1.8Ghz slot...Maybe ask to gokhanmoral why or if this is normal?
And the GPU setting affects only the GPU, not the CPU.
You can also try System Tuner on the Play Store for yours CPU settings, but be careful to not multiply the CPU apps setting to avoid conflicts in case of different settings in each apps
For example use only ExTweaks for your GPU settings and only SetCpu for your CPU settings... not more.
viking37 said:
In Cpu Master have you tick set on boot? Probably not, must check it.
Maybe a bit risky to 1.8Ghz unless you have tested this frequency for a long time and all is fine.
In any case with SetCpu the CPU freq remains after reboot.
And this is what I said, in ExTweaks there is not 1.7 and 1.8Ghz slot...Maybe ask to gokhanmoral why or if this is normal?
And the GPU setting affects only the GPU, not the CPU.
You can also try System Tuner on the Play Store for yours CPU settings, but be careful to not multiply the CPU apps setting to avoid conflicts in case of different settings in each apps
For example use only ExTweaks for your GPU settings and only SetCpu for your CPU settings... not more.
Click to expand...
Click to collapse
So it is better to leave this way, only use ExTweak and uninstall the other tweak apps?
Yes, I would say to keep only one app for your CPU settings.If the 1.6Ghz slot is good enough for you or your usage keep it like that.If you want test above 1.6Ghz then installs SetCpu but use only SetCpu for your CPU settings, not extweaks because there could be conflicts (maybe) if you set 1.6Ghz in ExTweaks and 1.8Ghz in SetCpu, not normally but you never know.
And with ExTweaks you can set many other things with Siyah kernel like GPU, sound, etc... so with this kernel ExTweaks is the best app, obiously
It really depends on what you want LOL, SetCpu is very complete for CPU settings but only for that (volatge, governor settings).
In my opinion just keep ExTweaks with your overclock at 1.6Ghz and you are good!
master64nl said:
But in ExTweaks there is no CPU slot for 1.7 or 1.8GHz. Only 1.6GHz. It has CPU undervolting. Is standard on NO.
But you can override GPU voltages levels. I don`t know how to use these or does it effect on the CPU?
I have use the app CPU Master of AnTuTu. Here there is a 1.8HHz slot but after rebooting and after a benchmark it is still 1.6GHz???
Perhaps I have to use the app SetCPU.
Click to expand...
Click to collapse
When I said voltage control, I didn't mean voltage control in extweaks. Voltage Control is an app in the play store which will allow you to set the CPU to 1.8. It overrides the settings used in extweaks. Set it to 1.8 and it will adjust the voltages accordingly. You can even change them independently if you like. Test at 1.8 for a few days and if you have no problems then tick to set it at boot. You will know if it's overclocked to 1.8 with CPU spy also from the play store.
Sent from my GT-I9300 using xda premium
Aha
sxi200 said:
When I said voltage control, I didn't mean voltage control in extweaks. Voltage Control is an app in the play store which will allow you to set the CPU to 1.8. It overrides the settings used in extweaks. Set it to 1.8 and it will adjust the voltages accordingly. You can even change them independently if you like. Test at 1.8 for a few days and if you have no problems then tick to set it at boot. You will know if it's overclocked to 1.8 with CPU spy also from the play store.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Aha voltage control is an app. I will look for it and found it. Finally there is the 1.8GHz :victory:
What to set with on demand? In ExTweaks they use pegasusq and in Voltage Control they use ondemand. There is also hotplug and performance. Is it better to deinstall the other tweak cpu apps?
Anyway this does not work. The same with CPU Master. Set it on 1.8GHz but it is hanging now with a benchmark. After rebooting it is back at 1.6GHz. Do I have to use another kernel?
viking37 said:
Yes, I would say to keep only one app for your CPU settings.If the 1.6Ghz slot is good enough for you or your usage keep it like that.If you want test above 1.6Ghz then installs SetCpu but use only SetCpu for your CPU settings, not extweaks because there could be conflicts (maybe) if you set 1.6Ghz in ExTweaks and 1.8Ghz in SetCpu, not normally but you never know.
And with ExTweaks you can set many other things with Siyah kernel like GPU, sound, etc... so with this kernel ExTweaks is the best app, obiously
It really depends on what you want LOL, SetCpu is very complete for CPU settings but only for that (volatge, governor settings).
In my opinion just keep ExTweaks with your overclock at 1.6Ghz and you are good!
Click to expand...
Click to collapse
First I try what sxi200 said about Voltage Control.
I am not happy
Tested the Voltage Control but after setting it on 1.8GHz and tried a benchmark it is dead :crying:
Had to put the battery out for 10 minutes. I think I use ExTweaks with the Siyah kernel at 1.6GHz pffffffff
master64nl said:
Aha voltage control is an app. I will look for it and found it. Finally there is the 1.8GHz :victory:
What to set with on demand? In ExTweaks they use pegasusq and in Voltage Control they use ondemand. There is also hotplug and performance. Is it better to deinstall the other tweak cpu apps?
Anyway this does not work. The same with CPU Master. Set it on 1.8GHz but it is hanging now with a benchmark. After rebooting it is back at 1.6GHz. Do I have to use another kernel?
Click to expand...
Click to collapse
Yeah I did set it to 1.8 a while ago and it also hung during benchmark tests. Maybe it needs more voltage at 1.8. Might be worth a try increasing it in the Voltage Control app.
After reboot it goes back to 1.6 unless you set it at boot within the vc app. But risky until you sort out the freezing issues. I'd recommend not to set it for now.
Personally, I found 1.6 to be fast enough so I just use extweaks. Also probably better for battery as well.
Sent from my GT-I9300 using xda premium
Related
Hi, first of all i would like to know if there is any uncomplicated way to overclock the gpu (and cpu) of the x10i (adreno 200) or is it even possiple?
My x10i is rooted, xrecovery is installed as well as the fps uncap (54 fps). (but i dont want to unlock the bootloader!)
Also i would like to be able to set the cpu frequency as i want it to be, which (free) app would you recommend, should be stable and reliable (should maybe also show the current frequency)?
If thats possible, it wouldnt be bad being able to set the gpu speed/frequency as well.
Until now I've found cpu tuner and antutu cpu master...
Thanks in advance guys
First u will need a custom kernel that supports OC, then u can use no frills cpu master (free from market) to overclock
OK thanks, but as i read in some other threads you cant really go much past 1100 mhz (cpu) because it will get unstable, so i just want to set the cpu frequency i want (so just underclocking or permanently stick it to 998mhz).
Which (free) app is best for this?
Raex said:
OK thanks, but as i read in some other threads you cant really go much past 1100 mhz (cpu) because it will get unstable, so i just want to set the cpu frequency i want (so just underclocking or permanently stick it to 998mhz).
Which (free) app is best for this?
Click to expand...
Click to collapse
Dont know about free but if youre willing to spend a little, SetCpu from the market works wonders
Sent from my X10i using xda premium
No frills cpu is free
So then i'm gonna try no-frills cpu control, but why is it better than antutu cpu master (free), or is it even better(?), both of them got an average of about 4,5 stars....
I've also seen that antutu cpu master (free) has advanced options with gpu control, but i dont really understand what can be done in these settings....there are no listed frequencies or anything.....(https://market.android.com/details?id=com.antutu.CpuMasterFree&hl=de)
I would say that other cpu apps may have more options but no frills is simple and elegant.As a normal user we dont need more than this.
Just my opinion
Works perfectly and has a nice statistic about the frequency(s) used
If u search xda forum properly u can find set CPU for free as a treat for xda members from the dev.
Sent from my X10 using XDA
Thanks but i'm happy with no-frills cpu control at the moment, has everything i need:
- full control over the current frequency
- widget showing the current frequency
- statistic about frequency(s) used (total and last 5 seconds)
- option to set my desired frequency right after booting
So for now thats all i need, maybe when i want to overclock it a bit (future, not now), then i'll use setcpu.
Hi.
My question is: Is there a way to overclock the cpu by specifying a set frequency, to run at, when opening a 3d application?
For example: The cpu is running by default at 480/600 (on any min/max like governor). When a 3d app is started the max value should scale up to 787 and then revert back to the default of 600 when the app is stopped/unfocused.
I checked out the profile creation feature of some cpu overclocking apps but didn't find any to provide this kind of functionality.
BobbyLoblaw said:
Hi.
My question is: Is there a way to overclock the cpu by specifying a set frequency, to run at, when opening a 3d application?
For example: The cpu is running by default at 480/600 (on any min/max like governor). When a 3d app is started the max value should scale up to 787 and then revert back to the default of 600 when the app is stopped/unfocused.
I checked out the profile creation feature of some cpu overclocking apps but didn't find any to provide this kind of functionality.
Click to expand...
Click to collapse
I don't think you can because setCPU doesn't have that option from what i saw.
Play with the governors, see which one fits your needs. Some of them won't go to 787 anyway if you don't force it to.
Check the governors out :
ondemand – Available in most kernels, and the default governor in most kernels. When the CPU load reaches a certain point (see “up threshold” in Advanced Settings), ondemand will rapidly scale the CPU up to meet demand, then gradually scale the CPU down when it isn't needed.
interactive – Available in newer kernels, and becoming the default scaling option in some official Android kernels. The interactive governor is functionally similar to the ondemand governor with an even greater focus on responsiveness.
conservative – Available in some kernels. It is similar to the ondemand governor, but will scale the CPU up more gradually to better fit demand. Conservative provides a less responsive experience than ondemand, but can save battery.
performance – Available in most kernels. It will keep the CPU running at the “max” set value at all times. This is a bit more efficient than simply setting “max” and “min” to the same value and using ondemand because the system will not waste resources scanning for CPU load.
powersave – Available in some kernels. It will keep the CPU running at the “min” set value at all times.
userspace – A method for controlling the CPU speed that isn't currently used by SetCPU. For best results, do not use the userspace governor.
smartass – Included in some custom kernels. The smartass governor effectively gives the phone an automatic Screen Off profile, keeping speeds at a minimum when the phone is idle.
BobbyLoblaw said:
Hi.
My question is: Is there a way to overclock the cpu by specifying a set frequency, to run at, when opening a 3d application?
For example: The cpu is running by default at 480/600 (on any min/max like governor). When a 3d app is started the max value should scale up to 787 and then revert back to the default of 600 when the app is stopped/unfocused.
I checked out the profile creation feature of some cpu overclocking apps but didn't find any to provide this kind of functionality.
Click to expand...
Click to collapse
Use tasker
Sent from my LG-P500 using xda premium
karthiknayak94 said:
Use tasker
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Gahhhhh I was going to reply 5 minute ago with those exact words and a wink!
Sent from my Legend using XDA
is there a way to overclock by going into system files
Asovse1 said:
Gahhhhh I was going to reply 5 minute ago with those exact words and a wink!
Sent from my Legend using XDA
Click to expand...
Click to collapse
Haha i beat you to it =P
Sent from my LG-P500 using xda premium
karthiknayak94 said:
Use tasker
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
I did try tasker but didn't find such options.
BobbyLoblaw said:
I did try tasker but didn't find such options.
Click to expand...
Click to collapse
I'm using it , for games, higher oc and performance governor xP
Search harder
Sent from my LG-P500 using xda premium
I'm using siyah kernel and would like to know how to change the CPU frequency should be locked to when highest GPU step is used.
to all using siyah kernel anyone know how/where to tweak this? TIA
bordikun said:
I'm using siyah kernel and would like to know how to change the CPU frequency should be locked to when highest GPU step is used.
to all using siyah kernel anyone know how/where to tweak this? TIA
Click to expand...
Click to collapse
I believe you use extweaks from the market....
I'm using extweak right now, mind telling me what part of it to tweak/set/adjust?
also in the CPU > SCHED_MC options are (0,1,2) which is the best? did really understand the description
edit: If you're on siyah kernel what sched_mc did you set?
bordikun said:
I'm using siyah kernel and would like to know how to change the CPU frequency should be locked to when highest GPU step is used.
to all using siyah kernel anyone know how/where to tweak this? TIA
Click to expand...
Click to collapse
Open extweaks and then go to the GPU section and simply change the value
Info: stock siyah is 500 and stock samsung is 1200
Mopral said:
Open extweaks and then go to the GPU section and simply change the value
Info: stock siyah is 500 and stock samsung is 1200
Click to expand...
Click to collapse
i'm looking to how to set at this custom frequency:
100MHz-160MHz-266MHz-400MHz
double post**
bordikun said:
i'm looking to how to set at this custom frequency:
100MHz-160MHz-266MHz-400MHz
Click to expand...
Click to collapse
So, what you really want is changing your GPU clock?
Answer: not working yet on Siyah because of a small code from samsung but should work on next siyah 1.3
Mopral said:
So, what you really want is changing your GPU clock?
Answer: not working yet on Siyah because of a small code from samsung but should work on next siyah 1.3
Click to expand...
Click to collapse
Oh i see, cause i read some post before you can use some code to tweak gpu lock but never mind cause its not working.
One last thing in the CPU > SCHED_MC which option did you set? 0,1, or 2? Didn't really much understand the description below, which saves more battery?
Can not answer this one: never touch this setting...
Ok thanks.
whenever i raise the clock above 1200mhz it crashes but in setcpu it can go till 1488mhz
so how to set it to 1488mhz without crashing or even 1300 or 1350mhz
Can you undervolt?
Yes you can undervolt
by the way undervolt is setting your cpu clock below the original
but how do i overclock it above 12000mhz
rohansingh5233 said:
whenever i raise the clock above 1200mhz it crashes but in setcpu it can go till 1488mhz
so how to set it to 1488mhz without crashing or even 1300 or 1350mhz
Click to expand...
Click to collapse
rohansingh5233 said:
Yes you can undervolt
by the way undervolt is setting your cpu clock below the original
but how do i overclock it above 12000mhz
Click to expand...
Click to collapse
Maybe you need OC Kernels for getting the overclocking capability for the processor.
but no one is there yet so can anyone build it
Hi, I have a rooted SGH-i777. I am using the Resurrection Remix 4.0.5 rom and running the latest AJK kernal. I used Set CPU to change my CPU speed and i set it as 1200 as the highest mHz and 500 as the lowest. I use the performance governor but all the time, when I check SetCpu, it says that the max is 500 mHz and I always have to touch 1200mHz on my screen to make it go back to 1200 mHz. Please help! Thanks
gainstatom said:
Hi, I have a rooted SGH-i777. I am using the Resurrection Remix 4.0.5 rom and running the latest AJK kernal. I used Set CPU to change my CPU speed and i set it as 1200 as the highest mHz and 500 as the lowest. I use the performance governor but all the time, when I check SetCpu, it says that the max is 500 mHz and I always have to touch 1200mHz on my screen to make it go back to 1200 mHz. Please help! Thanks
Click to expand...
Click to collapse
AJK has CPU clock built in on stweaks. Open stweaks and look under the CPU tab. Use stweaks to control the CPU and ditch set CPU. By using them both you're making contradictions in CPU logic.
razen_kain said:
AJK has CPU clock built in on stweaks. Open stweaks and look under the CPU tab. Use stweaks to control the CPU and ditch set CPU. By using them both you're making contradictions in CPU logic.
Click to expand...
Click to collapse
Sorry for being a noob but where can I change the governor?
gainstatom said:
Sorry for being a noob but where can I change the governor?
Click to expand...
Click to collapse
There are two governors awake and asleep. Scroll right in stweaks. Each has it's own tab
---------- Post added at 01:17 AM ---------- Previous post was at 01:15 AM ----------
Also there Is a q&a thread for AJK here
http://forum.xda-developers.com/showthread.php?p=43954171