Hi, I have a rooted SGH-i777. I am using the Resurrection Remix 4.0.5 rom and running the latest AJK kernal. I used Set CPU to change my CPU speed and i set it as 1200 as the highest mHz and 500 as the lowest. I use the performance governor but all the time, when I check SetCpu, it says that the max is 500 mHz and I always have to touch 1200mHz on my screen to make it go back to 1200 mHz. Please help! Thanks
gainstatom said:
Hi, I have a rooted SGH-i777. I am using the Resurrection Remix 4.0.5 rom and running the latest AJK kernal. I used Set CPU to change my CPU speed and i set it as 1200 as the highest mHz and 500 as the lowest. I use the performance governor but all the time, when I check SetCpu, it says that the max is 500 mHz and I always have to touch 1200mHz on my screen to make it go back to 1200 mHz. Please help! Thanks
Click to expand...
Click to collapse
AJK has CPU clock built in on stweaks. Open stweaks and look under the CPU tab. Use stweaks to control the CPU and ditch set CPU. By using them both you're making contradictions in CPU logic.
razen_kain said:
AJK has CPU clock built in on stweaks. Open stweaks and look under the CPU tab. Use stweaks to control the CPU and ditch set CPU. By using them both you're making contradictions in CPU logic.
Click to expand...
Click to collapse
Sorry for being a noob but where can I change the governor?
gainstatom said:
Sorry for being a noob but where can I change the governor?
Click to expand...
Click to collapse
There are two governors awake and asleep. Scroll right in stweaks. Each has it's own tab
---------- Post added at 01:17 AM ---------- Previous post was at 01:15 AM ----------
Also there Is a q&a thread for AJK here
http://forum.xda-developers.com/showthread.php?p=43954171
Related
I'm using siyah kernel and would like to know how to change the CPU frequency should be locked to when highest GPU step is used.
to all using siyah kernel anyone know how/where to tweak this? TIA
bordikun said:
I'm using siyah kernel and would like to know how to change the CPU frequency should be locked to when highest GPU step is used.
to all using siyah kernel anyone know how/where to tweak this? TIA
Click to expand...
Click to collapse
I believe you use extweaks from the market....
I'm using extweak right now, mind telling me what part of it to tweak/set/adjust?
also in the CPU > SCHED_MC options are (0,1,2) which is the best? did really understand the description
edit: If you're on siyah kernel what sched_mc did you set?
bordikun said:
I'm using siyah kernel and would like to know how to change the CPU frequency should be locked to when highest GPU step is used.
to all using siyah kernel anyone know how/where to tweak this? TIA
Click to expand...
Click to collapse
Open extweaks and then go to the GPU section and simply change the value
Info: stock siyah is 500 and stock samsung is 1200
Mopral said:
Open extweaks and then go to the GPU section and simply change the value
Info: stock siyah is 500 and stock samsung is 1200
Click to expand...
Click to collapse
i'm looking to how to set at this custom frequency:
100MHz-160MHz-266MHz-400MHz
double post**
bordikun said:
i'm looking to how to set at this custom frequency:
100MHz-160MHz-266MHz-400MHz
Click to expand...
Click to collapse
So, what you really want is changing your GPU clock?
Answer: not working yet on Siyah because of a small code from samsung but should work on next siyah 1.3
Mopral said:
So, what you really want is changing your GPU clock?
Answer: not working yet on Siyah because of a small code from samsung but should work on next siyah 1.3
Click to expand...
Click to collapse
Oh i see, cause i read some post before you can use some code to tweak gpu lock but never mind cause its not working.
One last thing in the CPU > SCHED_MC which option did you set? 0,1, or 2? Didn't really much understand the description below, which saves more battery?
Can not answer this one: never touch this setting...
Ok thanks.
Hi there, I am using Omega V9.0 with SiyahKernel S3 v1.3.8 and the app EdTweaks. But I can not get hoger than 1.6MHz. I read the specs and it said steps to 1.8GHz with the SiyahKernel S3 v1.3.8.
Is it somewhere hidden?
You need more voltage, but take care.
Enviado pelo meus dedos
Use Voltage Control or similar from the Play Store.
Sent from my GT-I9300 using xda premium
sxi200 said:
Use Voltage Control or similar from the Play Store.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
But I don`t know what settings for the voltage to get 1.8MHz?
I overclocked my calculator the other day. I got 1,9 MHz. Crazy.
My phone does 1,8 GHz
master64nl said:
But I don`t know what settings for the voltage to get 1.8MHz?
Click to expand...
Click to collapse
Hi,
For the 1.8Ghz slot the voltage is 1450mV, try by 25mV steps...
But I don't know the "tolerance" of maximum voltage, in my opinion don't go above 1500mV.
Maybe your CPU can't handle 1.8Ghz, if it's like some other phones, some can handle higher overclock, others can't...
You can use SetCpu, mostly don't set anything at boot...
EDIT:Re reading the OP..., in fact you do not see the 1.8Ghz slot???
Guys I think he is asking why you cannot OC higher than 1600mhz in extweaks.
I don't know whh that happens but you can use setcpu to OC to 1800mhz.
Sent from my GT-I9300 using xda premium
nodstuff said:
Guys I think he is asking why you cannot OC higher than 1600mhz in extweaks.
I don't know whh that happens but you can use setcpu to OC to 1800mhz.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hi,
That's what I thought after thought , thanks.
It's right in ExTweaks there is not the 1.7/1.8Ghz slots
So you can use SetCpu, the 1.7Ghz and 1.8Ghz slots are present.
Originally Posted by sxi200
Use Voltage Control or similar from the Play Store.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
But I don`t know what settings for the voltage to get 1.8MHz?
Click to expand...
Click to collapse
Voltage control will override the extweaks settings and sets the voltage according to your oc selection. Just open it and set to 1.8. If all is well you can set it at boot. If nit just reboot and reset but increase the voltage.
You can also check to see what it's running using CPU spy.
Sent from my GT-I9300 using xda premium
victorator said:
I overclocked my calculator the other day. I got 1,9 MHz. Crazy.
My phone does 1,8 GHz
Click to expand...
Click to collapse
:laugh: I mean 1.8GHz :laugh:
nodstuff said:
Guys I think he is asking why you cannot OC higher than 1600mhz in extweaks.
I don't know whh that happens but you can use setcpu to OC to 1800mhz.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Yes, that what I ment :good:
Thanks everyone for thinking with me.
sxi200 said:
Voltage control will override the extweaks settings and sets the voltage according to your oc selection. Just open it and set to 1.8. If all is well you can set it at boot. If nit just reboot and reset but increase the voltage.
You can also check to see what it's running using CPU spy.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
But in ExTweaks there is no CPU slot for 1.7 or 1.8GHz. Only 1.6GHz. It has CPU undervolting. Is standard on NO.
But you can override GPU voltages levels. I don`t know how to use these or does it effect on the CPU?
I have use the app CPU Master of AnTuTu. Here there is a 1.8HHz slot but after rebooting and after a benchmark it is still 1.6GHz???
Perhaps I have to use the app SetCPU.
In Cpu Master have you tick set on boot?
Maybe a bit risky to 1.8Ghz unless you have tested this frequency for a long time and all is fine.
In any case with SetCpu the CPU freq remains after reboot.
And this is what I said, in ExTweaks there is not 1.7 and 1.8Ghz slot...Maybe ask to gokhanmoral why or if this is normal?
And the GPU setting affects only the GPU, not the CPU.
You can also try System Tuner on the Play Store for yours CPU settings, but be careful to not multiply the CPU apps setting to avoid conflicts in case of different settings in each apps
For example use only ExTweaks for your GPU settings and only SetCpu for your CPU settings... not more.
viking37 said:
In Cpu Master have you tick set on boot? Probably not, must check it.
Maybe a bit risky to 1.8Ghz unless you have tested this frequency for a long time and all is fine.
In any case with SetCpu the CPU freq remains after reboot.
And this is what I said, in ExTweaks there is not 1.7 and 1.8Ghz slot...Maybe ask to gokhanmoral why or if this is normal?
And the GPU setting affects only the GPU, not the CPU.
You can also try System Tuner on the Play Store for yours CPU settings, but be careful to not multiply the CPU apps setting to avoid conflicts in case of different settings in each apps
For example use only ExTweaks for your GPU settings and only SetCpu for your CPU settings... not more.
Click to expand...
Click to collapse
So it is better to leave this way, only use ExTweak and uninstall the other tweak apps?
Yes, I would say to keep only one app for your CPU settings.If the 1.6Ghz slot is good enough for you or your usage keep it like that.If you want test above 1.6Ghz then installs SetCpu but use only SetCpu for your CPU settings, not extweaks because there could be conflicts (maybe) if you set 1.6Ghz in ExTweaks and 1.8Ghz in SetCpu, not normally but you never know.
And with ExTweaks you can set many other things with Siyah kernel like GPU, sound, etc... so with this kernel ExTweaks is the best app, obiously
It really depends on what you want LOL, SetCpu is very complete for CPU settings but only for that (volatge, governor settings).
In my opinion just keep ExTweaks with your overclock at 1.6Ghz and you are good!
master64nl said:
But in ExTweaks there is no CPU slot for 1.7 or 1.8GHz. Only 1.6GHz. It has CPU undervolting. Is standard on NO.
But you can override GPU voltages levels. I don`t know how to use these or does it effect on the CPU?
I have use the app CPU Master of AnTuTu. Here there is a 1.8HHz slot but after rebooting and after a benchmark it is still 1.6GHz???
Perhaps I have to use the app SetCPU.
Click to expand...
Click to collapse
When I said voltage control, I didn't mean voltage control in extweaks. Voltage Control is an app in the play store which will allow you to set the CPU to 1.8. It overrides the settings used in extweaks. Set it to 1.8 and it will adjust the voltages accordingly. You can even change them independently if you like. Test at 1.8 for a few days and if you have no problems then tick to set it at boot. You will know if it's overclocked to 1.8 with CPU spy also from the play store.
Sent from my GT-I9300 using xda premium
Aha
sxi200 said:
When I said voltage control, I didn't mean voltage control in extweaks. Voltage Control is an app in the play store which will allow you to set the CPU to 1.8. It overrides the settings used in extweaks. Set it to 1.8 and it will adjust the voltages accordingly. You can even change them independently if you like. Test at 1.8 for a few days and if you have no problems then tick to set it at boot. You will know if it's overclocked to 1.8 with CPU spy also from the play store.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Aha voltage control is an app. I will look for it and found it. Finally there is the 1.8GHz :victory:
What to set with on demand? In ExTweaks they use pegasusq and in Voltage Control they use ondemand. There is also hotplug and performance. Is it better to deinstall the other tweak cpu apps?
Anyway this does not work. The same with CPU Master. Set it on 1.8GHz but it is hanging now with a benchmark. After rebooting it is back at 1.6GHz. Do I have to use another kernel?
viking37 said:
Yes, I would say to keep only one app for your CPU settings.If the 1.6Ghz slot is good enough for you or your usage keep it like that.If you want test above 1.6Ghz then installs SetCpu but use only SetCpu for your CPU settings, not extweaks because there could be conflicts (maybe) if you set 1.6Ghz in ExTweaks and 1.8Ghz in SetCpu, not normally but you never know.
And with ExTweaks you can set many other things with Siyah kernel like GPU, sound, etc... so with this kernel ExTweaks is the best app, obiously
It really depends on what you want LOL, SetCpu is very complete for CPU settings but only for that (volatge, governor settings).
In my opinion just keep ExTweaks with your overclock at 1.6Ghz and you are good!
Click to expand...
Click to collapse
First I try what sxi200 said about Voltage Control.
I am not happy
Tested the Voltage Control but after setting it on 1.8GHz and tried a benchmark it is dead :crying:
Had to put the battery out for 10 minutes. I think I use ExTweaks with the Siyah kernel at 1.6GHz pffffffff
master64nl said:
Aha voltage control is an app. I will look for it and found it. Finally there is the 1.8GHz :victory:
What to set with on demand? In ExTweaks they use pegasusq and in Voltage Control they use ondemand. There is also hotplug and performance. Is it better to deinstall the other tweak cpu apps?
Anyway this does not work. The same with CPU Master. Set it on 1.8GHz but it is hanging now with a benchmark. After rebooting it is back at 1.6GHz. Do I have to use another kernel?
Click to expand...
Click to collapse
Yeah I did set it to 1.8 a while ago and it also hung during benchmark tests. Maybe it needs more voltage at 1.8. Might be worth a try increasing it in the Voltage Control app.
After reboot it goes back to 1.6 unless you set it at boot within the vc app. But risky until you sort out the freezing issues. I'd recommend not to set it for now.
Personally, I found 1.6 to be fast enough so I just use extweaks. Also probably better for battery as well.
Sent from my GT-I9300 using xda premium
whenever i raise the clock above 1200mhz it crashes but in setcpu it can go till 1488mhz
so how to set it to 1488mhz without crashing or even 1300 or 1350mhz
Can you undervolt?
Yes you can undervolt
by the way undervolt is setting your cpu clock below the original
but how do i overclock it above 12000mhz
rohansingh5233 said:
whenever i raise the clock above 1200mhz it crashes but in setcpu it can go till 1488mhz
so how to set it to 1488mhz without crashing or even 1300 or 1350mhz
Click to expand...
Click to collapse
rohansingh5233 said:
Yes you can undervolt
by the way undervolt is setting your cpu clock below the original
but how do i overclock it above 12000mhz
Click to expand...
Click to collapse
Maybe you need OC Kernels for getting the overclocking capability for the processor.
but no one is there yet so can anyone build it
Hi All..
First lemme give my phone details:
Galaxy S3 International (i9300)
Kernel : Siyah 1.8.9
ROMs (Dual Boot)
: WanamLite v5.5 (based on ZSEMA1)
CM10.1 Nightly
MODS : JKAY framework
My problem is that there is noticeable UI lags when in the homescreen or the app drawer.
I have not overclocked/underclocked the CPU. Have no undervoltage setting as well. In STweaks, the max CPU freq is set to the stock 1400Mhz and the min CPU freq is set to the recommended 200Mhz. And I have kept the "touch boost level" to 1200Mhz.
When I see the UI lags, I used CPU spy to monitor the CPU speeds. What I could see was that the speeds were at the lower end (200 - 800 Mhz) !!! Since the touch boost level is set to 1200, shouldn't the CPU jump to 1200 Mhz when I unlock/touch the screen ? I agree that the CPU speed needn't stay at 1200Mhz after the speed boost, but shouldn't it stay at a freq to ensure that there is no UI lag ?
If the operating freq is at 1400Mhz, the UI is perfect !!! It goes to this state automatically usually (takes a while ), or manually I can make this happen by setting the min CPU freq to say 1300 MHz from STweaks. Once this state is hit, the UI wrks with no lag until say I lock the screen, or maybe the device goes to sleep for a while.
Any ideas as to why the CPU freq stays at lower values and doesn't come up enough to give a lag free UI ?
stanzlavos said:
Hi All..
First lemme give my phone details:
Galaxy S3 International (i9300)
Kernel : Siyah 1.8.9
ROMs (Dual Boot)
: WanamLite v5.5 (based on ZSEMA1)
CM10.1 Nightly
MODS : JKAY framework
My problem is that there is noticeable UI lags when in the homescreen or the app drawer.
I have not overclocked/underclocked the CPU. Have no undervoltage setting as well. In STweaks, the max CPU freq is set to the stock 1400Mhz and the min CPU freq is set to the recommended 200Mhz. And I have kept the "touch boost level" to 1200Mhz.
When I see the UI lags, I used CPU spy to monitor the CPU speeds. What I could see was that the speeds were at the lower end (200 - 800 Mhz) !!! Since the touch boost level is set to 1200, shouldn't the CPU jump to 1200 Mhz when I unlock/touch the screen ? I agree that the CPU speed needn't stay at 1200Mhz after the speed boost, but shouldn't it stay at a freq to ensure that there is no UI lag ?
If the operating freq is at 1400Mhz, the UI is perfect !!! It goes to this state automatically usually (takes a while ), or manually I can make this happen by setting the min CPU freq to say 1300 MHz from STweaks. Once this state is hit, the UI wrks with no lag until say I lock the screen, or maybe the device goes to sleep for a while.
Any ideas as to why the CPU freq stays at lower values and doesn't come up enough to give a lag free UI ?
Click to expand...
Click to collapse
ANNNNNNNNNNNND what rom are you talking about!?! CM10.1 or Samsung? if you want a LAGG FREE phone do the following.
1: OverClock the CPU to 1.6ghz, then set min to 500mhz, use a -25mV or a -50mV
2: Set Governor to LULZACTIVEQ
3: Set MIN GPU freq to 266mhz
4: Set MAX GPU freq to 640mhz
5: Disable "gentle fair sleepers" on the CPU tab
6: Set the SCHEDULER to CFQ
7: Go to settings and enable GPU rendering
and FINALLY if non of the above work, FLASH Null_22.1 for a Samsung ROM. and Revolt, cm10.1, jellybam for a AOSP rom.
IF NON OF THAT WORK'S download super wipe and flash a new phone.
Can I just say, 1200mhz?!?! Default is 800 and I'm using 700 on my device. It's a bit extreme.
Perhaps your governor is affecting smoothness. Try using pegasusq. Or it may be the app your using to change CPU frequency doesn't even have ROOT access
International S III 16GB / CM10.1 / Gokhan's SK
paintball23456 said:
ANNNNNNNNNNNND what rom are you talking about!?! CM10.1 or Samsung? if you want a LAGG FREE phone do the following.
1: OverClock the CPU to 1.6ghz, then set min to 500mhz, use a -25mV or a -50mV
2: Set Governor to LULZACTIVEQ
3: Set MIN GPU freq to 266mhz
4: Set MAX GPU freq to 640mhz
5: Disable "gentle fair sleepers" on the CPU tab
6: Set the SCHEDULER to CFQ
7: Go to settings and enable GPU rendering and disable hardware overlays (resets on boot)
and FINALLY if non of the above work, FLASH Null_22.1 for a Samsung ROM. and Revolt, cm10.1, jellybam for a AOSP rom.
IF NON OF THAT WORK'S download super wipe and flash a new phone.
Click to expand...
Click to collapse
No. Do not disable hardware overlays. That will, if anything, cause your device to lag more.
Theshawty said:
No. Do not disable hardware overlays. That will, if anything, cause your device to lag more.
Click to expand...
Click to collapse
O_O not in my case..
paintball23456 said:
O_O not in my case..
Click to expand...
Click to collapse
This is a quote from a guy over at rootzwiki
Without a hardware overlay every application that is displaying things on the screen will share video memory and will have to constantly check for collision and clipping to render a proper image, this can cost a lot of processing power. With a hardware overlay each application gets its own portion of video memory, getting rid of the need to check for collision and clipping.
Basically, using hardware overlays can reduce CPU usage by quite a bit, so I would leave it enabled.
Click to expand...
Click to collapse
Theshawty said:
This is a quote from a guy over at rootzwiki
Click to expand...
Click to collapse
Right.. then why dafudge is my s3 SMOOTHER with it enabled?
paintball23456 said:
Right.. then why dafudge is my s3 SMOOTHER with it enabled?
Click to expand...
Click to collapse
Maybe you're just lucky, I dunno. It's better to let a real dev share his/her input on this. I'm merely a noob who knows how to Google...
Theshawty said:
Maybe you're just lucky, I dunno. It's better to let a real dev share his/her input on this. I'm merely a noob who knows how to Google...
Click to expand...
Click to collapse
L.O.L but not that big of a noob... thanks for the info - and also reminding me for the 100,000,000,000,000 time to sign up to rootwiki
paintball23456 said:
L.O.L but not that big of a noob... thanks for the info - and also reminding me for the 100,000,000,000,000 time to sign up to rootwiki
Click to expand...
Click to collapse
Heh, maybe not.
Uhm, you're welcome, I guess? :good:
It's probably smoother due to the fact that the CPU will be working at a higher frequency more often. Those that have disabled hardware overlays are causing their CPU to ramp up every time an application has to render an image
paintball23456 said:
ANNNNNNNNNNNND what rom are you talking about!?! CM10.1 or Samsung? if you want a LAGG FREE phone do the following.
1: OverClock the CPU to 1.6ghz, then set min to 500mhz, use a -25mV or a -50mV
2: Set Governor to LULZACTIVEQ
3: Set MIN GPU freq to 266mhz
4: Set MAX GPU freq to 640mhz
5: Disable "gentle fair sleepers" on the CPU tab
6: Set the SCHEDULER to CFQ
7: Go to settings and enable GPU rendering
and FINALLY if non of the above work, FLASH Null_22.1 for a Samsung ROM. and Revolt, cm10.1, jellybam for a AOSP rom.
IF NON OF THAT WORK'S download super wipe and flash a new phone.
Click to expand...
Click to collapse
The lag is more obvious in the Touchwiz based Wanamlite ROM.
1) As i said, when running at 1.4Ghz (with stock voltage settings) itsef the UI is smooth. So I don't actually want to overclock. . The problem is that the CPU speed doesn't rise up and stays between 200-800 causing the lag.
2) Will try changing the governor (first let me read how it is different from pegasusq ).
3,4) Again, with stock settings itself the UI is smooth. The problem is what i have said under point 1.
5) Already done.
6) WIll try setting scheduler to CFQ (again, lemme read bout it first )
7) GPU rendering is already ticketd. Hardware overlays are not disabled (thought this would increase the lag).
Is NULL_22.1 a Touchwiz based ROM ? And Jelybam is an AOKP ROM I supose ?
Wouldn't want to do the last option.
Also, I saw that you have mentioned three ROMs in your signature. Siyah lets you dual boot right, how come 3 ? Or were you just talking about your preference ?
And, does siyah 1.8.9 for the S3 let us boot with NULL_22.1 and jellybam in dual boot? Are all these combos possible ?
Sammy + CM10.1 (this works, I knw )
Sammy + AOKP
AOKP + CM10.1
raminica seemed
23Six said:
Can I just say, 1200mhz?!?! Default is 800 and I'm using 700 on my device. It's a bit extreme.
Perhaps your governor is affecting smoothness. Try using pegasusq. Or it may be the app your using to change CPU frequency doesn't even have ROOT access
International S III 16GB / CM10.1 / Gokhan's SK
Click to expand...
Click to collapse
From what I understood, it just boosts upto 1200Mhz on touch and needn't stay there. Right ? The only downside there is battery life I suppose ?
Am already using pegasusq and yes, sTweaks does have root access.
I want to oc so which secTION should i go to cpu boot frequency cpu boost frequency or max oc frequency?
bhavstech said:
I want to oc so which secTION should i go to cpu boot frequency cpu boost frequency or max oc frequency?
Click to expand...
Click to collapse
You should go to the OP section... In the dorimanx discussion thread OP is a link to a settings guide by eskriminal (I know, I put it there.). Read that for a start. In addition, Stweaks has a description of each setting... Not very hard to figure it out from that.
No offense, but if you can't figure out what to change, you're better off not changing anything.