Related
Hey, I hope I can get some help here. I'm a total noob and I don't know if other similar threads apply to me. Anyway, I have a rooted Xperia Neo V, with ICS 4.0.3 and I used ROM Manager app to casually flash the "Xperia Pureness" ROM I downloaded. I didn't do a full wipe because I was too stupid to look at the instructions. Is this fixable?
download this kernel http://forum.xda-developers.com/showthread.php?t=1566871
read this how to how to install kernel...
http://forum.xda-developers.com/showthread.php?t=1409269
if u do not get it post your queries
Xperia Neo V stuck at SONY logo
hey i also have the same problem. I forgot to wipe dalvik cache. Stuck at SONY logo. I havent unlocked my bootloader , so can i flash kernel mention in the above post.
skral said:
hey i also have the same problem. I forgot to wipe dalvik cache. Stuck at SONY logo. I havent unlocked my bootloader , so can i flash kernel mention in the above post.
Click to expand...
Click to collapse
you can install roms that can be installed on unlocked bootloaders....read this http://forum.xda-developers.com/showthread.php?t=1313445
can you get into CWM ??
samneov said:
download this kernel http://forum.xda-developers.com/showthread.php?t=1566871
read this how to how to install kernel...
http://forum.xda-developers.com/showthread.php?t=1409269
if u do not get it post your queries
Click to expand...
Click to collapse
Thank you. At some point the instructions require that I enter *#06# on my phone but I can't boot, it gets stuck at the Sony logo. Is this step necessary?
as can be interpreted u have a unlocked bootloader( i guess that's right)
you can try to use Sony Ericssion Update service to restore your phone to ICS
read this 1. http://communities-origin.sonyericsson.com/message/176189
and this 2.http://talk.sonymobile.com/thread/30938
see if it helps
I used SEUS to install stock rom . Now its working but all apps are gone.
so i can install any custom rom? Also did this happen because i didnt wipe dalvik cache bfore installing the rom.
samneov said:
you can install roms that can be installed on unlocked bootloaders....read this http://forum.xda-developers.com/showthread.php?t=1313445
can you get into CWM ??
Click to expand...
Click to collapse
skral said:
I used SEUS to install stock rom . Now its working but all apps are gone.
so i can install any custom rom? Also did this happen because i didnt wipe dalvik cache bfore installing the rom.
Click to expand...
Click to collapse
Ya ..you can install custom ROMS now i hope u hv boot loader unlocked ..head over to the Neov development section and download the ROM you want ..Follow the instructions really carefully while installing ROMS
And the answer of your second question is NO. When installing stock ROM or repairing it all apps and setting are gone nothing to do with wipe dalvik cache
Problem persists
So i tried installing pureness once more, this time i made sure i wiped davik cache. Same problem stuck at SONY and so had to revert to stock once more. I havent unlocked BL yet. Is it necessary for installing Pureness. Also can somebody tell me if i am doing it right.
1) used flash tool to downgrade to .562
2)rooted using Doomlords tool
3)Used flash tool to upgrade back to .431
4)Installed cwm auto installer apk from google play
5)Installed cwm
6)Booted into recovery
7)Made a backup
8)Used install from zip option to install Pureness
9) reboot and its stuck
Cant even access cwm since its stuck at that point , so i cant use the backup also right.
First, flash a specific kernel for that ROM.. Look for the link for kernels in the above post!
Flash the kernel first.. Reboot into recovery... Wipe data, wipe cache partition, wipe dalvik cache... And then install zip from sd card!
Reboot your phone! You'll be done now!
flashing kernel
I am guessing for flashing the kernel , i have to unlock bootloader.
You didn't unlock your bootloader?!
You definitely can't flash a custom kernel without unlocking it!
I suggest you go with the official Sony's way..
http://unlockbootloader.sonymobile.com/
BL
but that will void my warranty right and i will no longer be able to use SEUS for reveting to stock.
Yea.. That would void your warranty!
But unlocking the bootloader will allow to install custom ROMs which shall be very fast and smooth as compared to the stock one... and I don't think you'll revert back to stock!
Though relocking can be done but you won't be able to update your phone through over the air updates!
It's your choice!
1. Unlock bootloader using sony's,
Method
2. Flash the custom kernel
3. Get into CWM
4.wipe delvic/data/battery stat
5. Install custom rom
6. Install gapps(if necessary)
7.wipe delvic
8. Reboot
That are common steps
Also use the recommended kernel by the developer
Also follow his instruction...if in doubt serch if still confused post here
Sent from my MT11i using xda app-developers app
Mods ftw
I dont want to unlock bootloader now. Presently having fun with different mods . Once i get tired of them , will try unlocking. Please suggest some useful mods.Currently installed Romcontrol by jjdoctor and walkman for ICS by thilinac.
SAMPLE TUTORIAL
I-SCREAM-11i + Night-Elf kernel RC5 tutorial
================================================== =========
requirement: unlock bootloader
================================================== =========
download I-Scream_official_431.zip [copy to sd card]
download I-Scream_official_431_update.zip [copy to sd card]
download I-Scream_restore_vdd_level.zip [copy to sd card]
download FASTBOOT [extract to PC]
download kernel [boot_ics_v1_rc5.img]
copy/paste it to fastboot folder
rename it to boot.img
open cmd window(by pressing shift+right click mouse & open command window)
turn off phone,connect phone to pc by pressing settings button (now led will turn on will lit blue) [PdaNetA350x64 for 64BIT OS driver]
paste this in cmd - fastboot flash boot boot.img
press enter
================================================== ======================================
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache]
- install zip from sdcard I-Scream_official_431.zip
- install zip from sdcard I-Scream_restore_vdd_level.zip
- reboot into system
LED Flash not working
I was trying out some of the mods (ROM Contol and Walkman music for ICS) and now the LED flash is not working and camera image is upside down. Any idea why?
skral said:
but that will void my warranty right and i will no longer be able to use SEUS for reveting to stock.
Click to expand...
Click to collapse
even if u unlock u r boot loader you would be able to use SEUS....i did so when my phone simple stopped responding after flashing certain kernel
skral said:
I was trying out some of the mods (ROM Contol and Walkman music for ICS) and now the LED flash is not working and camera image is upside down. Any idea why?
Click to expand...
Click to collapse
please read the related threads carefully ....use search.....usually there is a solution given.....else it is a bug which will be fixed in the next release....do a little digging:laugh:
basically i have the same problem.. (neo)
already unlocked bootloader.. apply nightelf kernel successfully..
step i do:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache]
- install zip from sdcard Xperia_Ice_Cream_Pureness_build_3_NeoV.zip
- install zip from sdcard Neo_patch_for_Xperia_Pureness_build_3.zip
- reboot into system
still stuck at sony logo.. then i remove battery, try to boot into cwm..
it still works!
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before..
so.. got any idea or solution? thx in advance...
hello..
i've search thru the forum, and my prob is somehow differ than others..
already unlocked bootloader.. apply custom kernel successfully..
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
still stuck at sony logo.. wait around 1 hour.. nothing happened...
then i remove battery, try to boot into cwm..
success..
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before.. and i restored back..
the ROM i tried is Pureness build 3 and jjHybrid 3.1.. both give same problem..
check screenshot of my system below.. is there's any problem with my system?
or it is related to odex?
so.. got any idea or possible solution?
or my phone problem itself?
thx in advance...
try other kernel...
1. Pureness build 3 ,Kernel :Night Elfs ICS Kernel mod
2. jjHybrid 3.1,Kernel Use any of Following
a) STOCK Kernel (No OverClocking)
b) shardul_seth Kernel
c) Night-Elf Kernel
d) Adridu kernel
look at specific thread,you will find the answer.
dualsh0ck said:
hello..
i've search thru the forum, and my prob is somehow differ than others..
already unlocked bootloader.. apply custom kernel successfully..
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
still stuck at sony logo.. wait around 1 hour.. nothing happened...
then i remove battery, try to boot into cwm..
success..
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before.. and i restored back..
the ROM i tried is Pureness build 3 and jjHybrid 3.1.. both give same problem..
check screenshot of my system below.. is there's any problem with my system?
or it is related to odex?
so.. got any idea or possible solution?
or my phone problem itself?
thx in advance...
Click to expand...
Click to collapse
I see that you are not wiping/formatting your data.. Wiping data is essential when installing a custom ROMs or switching ROMs..
Before wiping cache, format your data first!
iamdchosen1 said:
I see that you are not wiping/formatting your data.. Wiping data is essential when installing a custom ROMs or switching ROMs..
Before wiping cache, format your data first!
Click to expand...
Click to collapse
it is not enough to wipe cache, dalvik-cache, battery stat etc? becoz i already done all that through CWM.
and a noob question, how to properly format the data? phone data or sdcard data?
megatpanji said:
try other kernel...
1. Pureness build 3 ,Kernel :Night Elfs ICS Kernel mod
2. jjHybrid 3.1,Kernel Use any of Following
a) STOCK Kernel (No OverClocking)
b) shardul_seth Kernel
c) Night-Elf Kernel
d) Adridu kernel
look at specific thread,you will find the answer.
Click to expand...
Click to collapse
thx but problem above already appeared when i tried to flash pureness build 3 ROM on night-elf kernel..
dualsh0ck said:
it is not enough to wipe cache, dalvik-cache, battery stat etc? becoz i already done all that through CWM.
and a noob question, how to properly format the data? phone data or sdcard data?
Click to expand...
Click to collapse
The data has to be wiped when you install a custom ROM.. Since some of the data can cause troubles to the new ROM you have installed..
I advice you to do the following when installing a ROM.. Follow step by step..
- Flash the kernel first
- Boot into CWM mode by pressing 'volume down'
- wipe data/factory reset
- wipe cache partition
- wipe dalvik cache
- install custom zip from sd card i.e your custom ROM zip file
- reboot now
there you go now!
PS. Data formatting has to be done in CWM mode and it will not erase your sd data! So relax!
Also, press 'Thanks' if I helped you!
CHEERS!
iamdchosen1 said:
The data has to be wiped when you install a custom ROM.. Since some of the data can cause troubles to the new ROM you have installed..
I advice you to do the following when installing a ROM.. Follow step by step..
- Flash the kernel first
- Boot into CWM mode by pressing 'volume down'
- wipe data/factory reset
- wipe cache partition
- wipe dalvik cache
- install custom zip from sd card i.e your custom ROM zip file
- reboot now
there you go now!
PS. Data formatting has to be done in CWM mode and it will not erase your sd data! So relax!
Also, press 'Thanks' if I helped you!
CHEERS!
Click to expand...
Click to collapse
according to my first post. here
dualsh0ck said:
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
Click to expand...
Click to collapse
i've already done all wiping in CWM. but still stuck at sony logo.maybe i'll try some other kernel for jjhybrid3.1
Did you tried what I said?
Sent from my MT11i using xda premium
iamdchosen1 said:
Did you tried what I said?
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
one thing.. if i already used custom kernel and i want to change to another custom kernel.. can i just flash new custom kernel on the old custom kernel?
i have suave kernel now.. and i want to change to alliance kernel..
dualsh0ck said:
one thing.. if i already used custom kernel and i want to change to another custom kernel.. can i just flash new custom kernel on the old custom kernel?
Click to expand...
Click to collapse
Yes.
after flashing Alliance1.4 kernel.. my phone got error message "com.android.phone has stopped". what happened?
as before, i just reflash to stock fw.. or there is another solution?
dualsh0ck said:
after flashing Alliance1.4 kernel.. my phone got error message "com.android.phone has stopped". what happened?
as before, i just reflash to stock fw.. or there is another solution?
Click to expand...
Click to collapse
I don't know why you're getting so much errors?!
I flashed everything on one go and all were just fine to work!
Please tell me your exact process of doing all this?
iamdchosen1 said:
I don't know why you're getting so much errors?!
I flashed everything on one go and all were just fine to work!
Please tell me your exact process of doing all this?
Click to expand...
Click to collapse
before this with alliance1.1 and suave6 kernel work with no probs.
must i tell this in every reply?
this is the exact step doing all of this..
flash kernel via fastboot thru command prompt window..
and flash rom thru cwm with this step..
- reboot into recovery [power button then repeatedly press volume up]
- [wipe data/factory reset,cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
and chill bro. i have problem here, and i ask about it because i dont know what to do.
and fastboot folder must placed in android-sdk folders or it is not necessary?
bump
Are you sure the kernels are compatible with the custom ROM you are using? Usually the developer suggests some ROMs. Also, you might need a different baseband for the kernels you are using. Which ROM are you using? Some have extra steps you have to perform.
Sent from my MT11i using xda app-developers app
Only boot.img has to be placed in android sdk folder.
Sent from my MT11i using xda app-developers app
Sorry I'm not awake today. Boot.img must be in android sdk and only the fastboot.exe file. I doubt it's got anything to do with that though, if you can successfully flash kernels.
Sent from my MT11i using xda app-developers app
Vampirmaniac said:
Are you sure the kernels are compatible with the custom ROM you are using? Usually the developer suggests some ROMs. Also, you might need a different baseband for the kernels you are using. Which ROM are you using? Some have extra steps you have to perform.
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
yup i'm sure.. because i want to flash night-elf kernel + jjhybrid3.1 rom..
as for now i use stock rom because can't successfully flash any custom rom..
my baseband 8x55A-AAABQOAZM-203028G-72.. it is also related?
HEY EVEN I HAD THE SAME SAME PROBLEM BEFORE...its was that i followed all the steps n still was stuck at bootlogo
even if i tried to go to recovery n flash the rom again , it simply said CANNOT MOUNT SD CARD.
So I tried to format my sd card using SDFORMATTER 3.1 and flashed the om again and :laugh: it WORKED
SO BASICALLY TRY TO FORMAT THE SD CARD USING SD FORMATTER software and not the windows default one.
IT WORKED FOR ME AND HOPE IT WILL FOR YOU ALSO
SD CARD FORMATTER 3.1 link google it
hey guys... really need help here...
i just successful UNLOCKED Bootloader,CWM and install custom kernel..
After fastboot the custom kernel (suave) then enter the CWM to flash custom ROM(Xperia_Ice_Cream_Pureness_build_6.00_NeoV)... wipe all data and other common step.. then i reboot the system
My phone get boot loop after that. So i remove the battery then enter the CWM again.. but the colour change to red and detect my phone as "xperia ARC".. plzzz.. i really stuck here
I was trying to install Custom ROM from this post
http://forum.xda-developers.com/showthread.php?t=1994064
after i did these steps
1.Flash the respective kernel for your device
2.Reboot into Clockwordmod Recovery
3.Factory Reset
4.Wipe Cache Partition
5.Advanced>Wipe Dalvik Cache
6.Mounts and storage > Format /system
My mobile got hanged and restarted now my mobile is stuck in sony logo screen and i am not able to boot o CWM Recovery
I have a Nandroid backup pl help me fix my mobile i will be very thankfull
pl do somethis
Flash the recovery from the computer and try again. You don't have to reboot where you did, you have to continue with the steps.
Did you increase your system partition?
Or it wouldn't work
Sent from my Xperia Neo V using xda premium
Flash via flashtool
Sent from my LT18i using xda app-developers app
thanks guys
thank u so much guys it helped me a lot
Please Suggest Me a Working ROM FOR MY Xperia NEO L
Please suggest me a working rom that works perfectly like jelly bean
please help
hi,
i was trying to instal Cyanogenmod 7.2 ROM on my rooted neo l,but by mistake i missed the cm7.2 img step and install rom directly.
now phone is stuck on sony logo.
please help me to get working.
dabas.dabas said:
hi,
i was trying to instal Cyanogenmod 7.2 ROM on my rooted neo l,but by mistake i missed the cm7.2 img step and install rom directly.
now phone is stuck on sony logo.
please help me to get working.
Click to expand...
Click to collapse
Just flash the CM7 kernel and you'll be up and going.
say no to Drugs and ICS!
plz help me....???
Jerin1991 said:
I was trying to install Custom ROM from this post
http://forum.xda-developers.com/showthread.php?t=1994064
after i did these steps
1.Flash the respective kernel for your device
2.Reboot into Clockwordmod Recovery
3.Factory Reset
4.Wipe Cache Partition
5.Advanced>Wipe Dalvik Cache
6.Mounts and storage > Format /system
My mobile got hanged and restarted now my mobile is stuck in sony logo screen and i am not able to boot o CWM Recovery
I have a Nandroid backup pl help me fix my mobile i will be very thankfull
pl do somethis
Click to expand...
Click to collapse
hi bro this problem is happen to me also.. do u found any solution about this problem plz help me i use xperia Neo l mt25i
tukulu1991 said:
hi bro this problem is happen to me also.. do u found any solution about this problem plz help me i use xperia Neo l mt25i
Click to expand...
Click to collapse
What exactly did you do to get stuck?
Sent from my Xperia Neo V using Tapatalk 2
i have solvd that...
Attitude.SSJ said:
What exactly did you do to get stuck?
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
ok... now my mobile is ok.. I have flash a boot.img file named boot400mb.img lyk that then my recoverymod is work and then I install again the smart rom xperia neo L v1.0 with a full wipe now my mobile is ok working good.. thnx u all and xdadevelopers
tukulu1991 said:
ok... now my mobile is ok.. I have flash a boot.img file named boot400mb.img lyk that then my recoverymod is work and then I install again the smart rom xperia neo L v1.0 with a full wipe now my mobile is ok working good.. thnx u all and xdadevelopers
Click to expand...
Click to collapse
can u share the img file and the recoverymod file? i mean the the file that u use to repair this problem..
thankyou
Sola stuck at Sony boot logo
Hi,
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime. It would be very kind if you could help me in getting the phone to work as normal.
Thanks,
Irfan
saeedirfaan said:
Hi,
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime. It would be very kind if you could help me in getting the phone to work as normal.
Thanks,
Irfan
Click to expand...
Click to collapse
Flash the kernel... Step one which you missed is causing the problem... Once you flash kernel the rom should boot... Or if you want to go to stock flash stock ftf file with flashtool...
Sent from my Xperia Neo V using Tapatalk 2
Attitude.SSJ said:
Flash the kernel... Step one which you missed is causing the problem... Once you flash kernel the rom should boot... Or if you want to go to stock flash stock ftf file with flashtool...
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
I have same problem after installing via CWM, and now my phone stuck on sony logo. i won't flash with flashtool cause I forgot to enable usb debugging. anyone could halp me?
just flash the kernel and you will be able to boot to recovery then flash the rom..
Sent from my Xperia Neo V using xda app-developers app
ribek said:
I have same problem after installing via CWM, and now my phone stuck on sony logo. i won't flash with flashtool cause I forgot to enable usb debugging. anyone could halp me?
Click to expand...
Click to collapse
switch on the phone.
Connect using USB cable in ON condition.
After sometime switch off.
Connect in flashmode
Remove
Connect in Fastboot mode
Now try flashing. If it does not work
try SEUS http://sony-ericsson-update-service.en.uptodown.com/
Hit thanks if it helps
where to find kernel for xperia pro rom kitkat
mksallam said:
where to find kernel for xperia pro rom kitkat
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1642480 see this
Hi everydoby.
I actually use CM 10 but there are some lags and intempestive reboot. So i want to test another ROM. I tried Ultimate HD few month ago, and now i want to test it again, with it new features.
I tried a lot of different kernel (flykernel, lupus, xkernel, Alliance kernel ....) but i always have a black screen after boot or boot animation of the kernel (Sony logo for example) doesnt exist (black sceen and violet LED).
Maybe, its because i use wrong kernel. So, can you please link me a good kernel I can use?
Actually, my NEO (MT15I) is:
Android Version: 4.1.2
Baseband: ............. 203028G-77
Core Version: 2.6.32.9-FXP
CM10
Thanks in advance.
Nikko77 said:
Hi everydoby.
I actually use CM 10 but there are some lags and intempestive reboot. So i want to test another ROM. I tried Ultimate HD few month ago, and now i want to test it again, with it new features.
I tried a lot of different kernel (flykernel, lupus, xkernel, Alliance kernel ....) but i always have a black screen after boot or boot animation of the kernel (Sony logo for example) doesnt exist (black sceen and violet LED).
Maybe, its because i use wrong kernel. So, can you please link me a good kernel I can use?
Actually, my NEO (MT15I) is:
Android Version: 4.1.2
Baseband: ............. 203028G-77
Core Version: 2.6.32.9-FXP
CM10
Thanks in advance.
Click to expand...
Click to collapse
Going back to stock based ROMs requires flashing stock ftf first.
And then flashing the respective kernel and then the ROM.
say no to Drugs and ICS!
karanrajkapur said:
Going back to stock based ROMs requires flashing stock ftf first.
And then flashing the respective kernel and then the ROM.
say no to Drugs and ICS!
Click to expand...
Click to collapse
No need dude just flash kernel and Rom.. Flashing ftf only required when you are facing difficulties
thx dudes for replyes.
I flashed 4.1.B.0.587 firware. Then i flashed kernel (lupus, flykernel or else) then i use recovery to flash the rom.
But i always have black screen (no logo on kernel, LED becomes violet) or boot loop (depend of kernel). This is why i want someone to tell me which kernel is sure to work with this rom, please.
I dont know if you understand what i need, i'm sorry for my bad english.
Nikko77 said:
thx dudes for replyes.
I flashed 4.1.B.0.587 firware. Then i flashed kernel (lupus, flykernel or else) then i use recovery to flash the rom.
But i always have black screen (no logo on kernel, LED becomes violet) or boot loop (depend of kernel). This is why i want someone to tell me which kernel is sure to work with this rom, please.
I dont know if you understand what i need, i'm sorry for my bad english.
Click to expand...
Click to collapse
Did you perform full wipes while installing uhd rom?
Sent from my Xperia Neo V using Tapatalk 2
koradiavatsal said:
Did you perform full wipes while installing uhd rom?
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
Yes i did. I did factory reset + wipe cache partition + wipe dalvik cache + wipe battery stat + format /system + /format and 2 others (i dont remember their title). I do that before after flashing kernel and before flashing ROM. Then, once ROM is installed, i do it again.
Nikko77 said:
Yes i did. I did factory reset + wipe cache partition + wipe dalvik cache + wipe battery stat + format /system + /format and 2 others (i dont remember their title). I do that before after flashing kernel and before flashing ROM. Then, once ROM is installed, i do it again.
Click to expand...
Click to collapse
What do u mean by once rom is installed I do it again?
Mate the thing is after wiping and installing rom you jst have to install patch(if it exist-rom specific) and reboot. Why wipe everything again?
Sent from my Xperia Neo V using Tapatalk 2
twy gafrba
koradiavatsal said:
What do u mean by once rom is installed I do it again?
Mate the thing is after wiping and installing rom you jst have to install patch(if it exist-rom specific) and reboot. Why wipe everything again?
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
I mean i full wipe (factory reset + wipe dalvik cache etc...) after ROM is installed. I never know if it is before flashing rom or after, So i do it twice. Is that a problem you think ?
I want to install this ROM http://forum.xda-developers.com/showthread.php?t=1924291&highlight=13 . But i don't know wich kernel to flash.
Nikko77 said:
I mean i full wipe (factory reset + wipe dalvik cache etc...) after ROM is installed. I never know if it is before flashing rom or after, So i do it twice. Is that a problem you think ?
I want to install this ROM http://forum.xda-developers.com/showthread.php?t=1924291&highlight=13 . But i don't know wich kernel to flash.
Click to expand...
Click to collapse
Flash any ics kernel.
And the problem is perform all wipes then install rom and chose ur choices in aroma and reboot. No need to wipe anything after installation.
Sent from my Xperia Neo V using Tapatalk 2
koradiavatsal said:
Flash any ics kernel.
And the problem is perform all wipes then install rom and chose ur choices in aroma and reboot. No need to wipe anything after installation.
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
can you please link me a kernel i should flash please ?
I tried to search with key word "ICS kernel" on XDA NEO forum, i tried to flash them but i didn't work.
I'm actually on CM10 (JB 4.1). I can flash kernel and then ROM or it's better come back on ICS 4.0.4 before, flashing the ftf ?
Nikko77 said:
can you please link me a kernel i should flash please ?
I tried to search with key word "ICS kernel" on XDA NEO forum, i tried to flash them but i didn't work.
I'm actually on CM10 (JB 4.1). I can flash kernel and then ROM or it's better come back on ICS 4.0.4 before, flashing the ftf ?
Click to expand...
Click to collapse
Use this thread and get an ics kernel of ur liking http://forum.xda-developers.com/showthread.php?p=18690714
Yes. Flash kernel. Go to recovery. Perform all six wipes. Install rom zip and reboot. No ftf flashing required
Sent from my Xperia Neo V using Tapatalk 2
koradiavatsal said:
Use this thread and get an ics kernel of ur liking http://forum.xda-developers.com/showthread.php?p=18690714
Yes. Flash kernel. Go to recovery. Perform all six wipes. Install rom zip and reboot. No ftf flashing required
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
Ok, i try again this kernel:
720p
LuPuS_phoenix_Stock-gB+iCsv3-full.img
md5 = df50d9280ecc650bfa808039aac57030
(I already tried it yesterday, let see what happen now).
I'll tell you.
-----------------------------------------------------------------------
Here is the log of flash tool:
22/013/2013 20:13:01 - INFO - FASTBOOT Output:
sending 'boot' (7168 KB)...
(bootloader) USB download speed was 9326kB/s
OKAY [ 0.794s]
writing 'boot'...
(bootloader) Download buffer format: boot IMG
(bootloader) Flash of partition 'boot' requested
(bootloader) S1 partID 0x00000003, block 0x00000280-0x000002e3
(bootloader) Erase operation complete, 0 bad blocks encountered
(bootloader) Flashing...
(bootloader) Flash operation complete
OKAY [ 1.443s]
finished. total time: 2.237s
22/013/2013 20:13:01 - INFO - Please check the log before rebooting into system
-------------------------------------------------
Lupus didn't work. No boot animation of the kernel. Phone's LED turned blue and the phone vibrate twice.
I tried Radeon V4. I can see Sony logo but its a boot loop. The phone's LED turned blue too and vibrate twice.
In recovery , i did:
- factory reset
- wipe cache partition
- wipe dalvik cache
- wipe battery stat
- format /system
- format /cache
- format /data.
I don't know what to do. I think i'll turn back to CM 10
----------------
Well, i tried almost 5 different kernels but none works. There are boot loops or juste black screen.
I will turn back CM 10.
Thank you dude and sorry for your waste of time
Nikko77 said:
Ok, i try again this kernel:
720p
LuPuS_phoenix_Stock-gB+iCsv3-full.img
md5 = df50d9280ecc650bfa808039aac57030
(I already tried it yesterday, let see what happen now).
I'll tell you.
-----------------------------------------------------------------------
Here is the log of flash tool:
22/013/2013 20:13:01 - INFO - FASTBOOT Output:
sending 'boot' (7168 KB)...
(bootloader) USB download speed was 9326kB/s
OKAY [ 0.794s]
writing 'boot'...
(bootloader) Download buffer format: boot IMG
(bootloader) Flash of partition 'boot' requested
(bootloader) S1 partID 0x00000003, block 0x00000280-0x000002e3
(bootloader) Erase operation complete, 0 bad blocks encountered
(bootloader) Flashing...
(bootloader) Flash operation complete
OKAY [ 1.443s]
finished. total time: 2.237s
22/013/2013 20:13:01 - INFO - Please check the log before rebooting into system
-------------------------------------------------
Lupus didn't work. No boot animation of the kernel. Phone's LED turned blue and the phone vibrate twice.
I tried Radeon V4. I can see Sony logo but its a boot loop. The phone's LED turned blue too and vibrate twice.
In recovery , i did:
- factory reset
- wipe cache partition
- wipe dalvik cache
- wipe battery stat
- format /system
- format /cache
- format /data.
I don't know what to do. I think i'll turn back to CM 10
----------------
Well, i tried almost 5 different kernels but none works. There are boot loops or juste black screen.
I will turn back CM 10.
Thank you dude and sorry for your waste of time
Click to expand...
Click to collapse
Mate bootloops, stuck on sony logo is because when u flash an ics kernel a jb rom is installed so phone wont boot. Jst go to recovery . And full wipes and install zip...
Whats wrong with lupus one mate? Find right one for ur device. And download and fastboot it
Sent from my Xperia Neo V using Tapatalk 2
Nikko77 said:
can you please link me a kernel i should flash please ?
I tried to search with key word "ICS kernel" on XDA NEO forum, i tried to flash them but i didn't work.
I'm actually on CM10 (JB 4.1). I can flash kernel and then ROM or it's better come back on ICS 4.0.4 before, flashing the ftf ?
Click to expand...
Click to collapse
Flash any ICS kernel and make full wipes and then install the zip.
Reboot.
Done.
say no to Drugs and ICS!
thank you all for your replies.
I explain how i proceeded.
1- i'm on CM10 - jelly bean 4.1.
2- I flash a ICS kernel (lupus for example)
3- i go on recovery mod, do full wipes.
4- Still on recovery, i flash ROM.zip
5- i reboot.
But i still have black screen when sony logo desapear.
I use flash tool or ADB to flash kernel.
Nikko77 said:
thank you all for your replies.
I explain how i proceeded.
1- i'm on CM10 - jelly bean 4.1.
2- I flash a ICS kernel (lupus for example)
3- i go on recovery mod, do full wipes.
4- Still on recovery, i flash ROM.zip
5- i reboot.
But i still have black screen when sony logo desapear.
I use flash tool or ADB to flash kernel.
Click to expand...
Click to collapse
Use fastboot mode to flash kernel
For ics rom -ics kernel, gb rom- gb kernel, jb rom- jb kernel..
Nikko77 said:
thank you all for your replies.
I explain how i proceeded.
1- i'm on CM10 - jelly bean 4.1.
2- I flash a ICS kernel (lupus for example)
3- i go on recovery mod, do full wipes.
4- Still on recovery, i flash ROM.zip
5- i reboot.
But i still have black screen when sony logo desapear.
I use flash tool or ADB to flash kernel.
Click to expand...
Click to collapse
Dude, NEVER FORGET.
ICS requires an ICS kernel and JB requires a JB kernel.
say no to Drugs and ICS!
karanrajkapur said:
Dude, NEVER FORGET.
ICS requires an ICS kernel and JB requires a JB kernel.
say no to Drugs and ICS!
Click to expand...
Click to collapse
Yes i understand that Kernel B works with ROM B, not with ROM A. But what should i do ?
Actually on JB. I flash FTF of ICS then flash kernel lupus then recovery => flash rom ?
Nikko77 said:
Yes i understand that Kernel B works with ROM B, not with ROM A. But what should i do ?
Actually on JB. I flash FTF of ICS then flash kernel lupus then recovery => flash rom ?
Click to expand...
Click to collapse
how did you install jb rom before, if you don't know this .. follow above said procedure :good:
Nikko77 said:
thank you all for your replies.
I explain how i proceeded.
1- i'm on CM10 - jelly bean 4.1.
2- I flash a ICS kernel (lupus for example)
3- i go on recovery mod, do full wipes.
4- Still on recovery, i flash ROM.zip
5- i reboot.
But i still have black screen when sony logo desapear.
I use flash tool or ADB to flash kernel.
Click to expand...
Click to collapse
Going by this, your steps seem alright to me!!
Try flashing stock ftf and then try this procedure on the stock kernel
Only thing I hope is you're not hotbooting your kernel or are you??
Sent from my GT-P3110 using xda app-developers app
HELP needed ..!!
okay, so i followed this steps ( http://www.youtube.com/watch?v=7tgmmQgRrZw ) to unlock bootloader of my wt19i .. did it as it is shown .. now my phone is stuck in the logo sign when i'm trying to turn it on !! need help asap.
prds359 said:
HELP needed ..!!
okay, so i followed this steps ( http://www.youtube.com/watch?v=7tgmmQgRrZw ) to unlock bootloader of my wt19i .. did it as it is shown .. now my phone is stuck in the logo sign when i'm trying to turn it on !! need help asap.
Click to expand...
Click to collapse
Okay so here's a solution
1. Download flashtool first from here
2. Download ICS stock ftf from here
3. Now flash the ftf to your phone in FlashMode, when connected to PC
if any further query, let me know
Happy Flashing
thank u so much @Sangeet007 .. solved my purpose
Having another problem ..
didn't want to create another thread for this ..
so continuing here ..
Rooted completely & unlocked boot-loader of my wt19i ..
but CM 9.1 isn't installing ..
trying to flash it from CWM & it's showing
"E: Error in/sdcard/cm-9.1.0-coconut.zip
(Status 7) Installation aborted."
help needed ASAP ..
seems like if we don't create new thread, no one's going to notice !!!! :'(
HELP needed here ! please .!
Download the rom again and transfer it to your phone. Flash the kernel from inside the rom.zip, then flash the rom after performing wipe data/factory reset and wipe cache
Sent from my Nexus 4 running Android 4.3
facing the same problem! can it be done with any software like flashtool or such?
prds359 said:
facing the same problem! can it be done with any software like flashtool or such?
Click to expand...
Click to collapse
No, you have to flash it using cwm
Could it be you wiped /system before flashing? Because you shouldn't do that!
So there's the problem !!!
what i did -
wiped data/ factory reset
wiped cache partition
wiped dalvik cache ..
Solution please
prds359 said:
So there's the problem !!!
what i did -
wiped data/ factory reset
wiped cache partition
wiped dalvik cache ..
Solution please
Click to expand...
Click to collapse
After wiping delvic cache did u frmat the system ,data ,cache which located in the advanced tab ???
can u gve me the link that the rom ur trying to install??
*first flash the recommended kernal
*Wipe Data/Factory Reset
*Wipe Cache Partition
*Wipe Dalvik Cache
*Go to Mounts & Storage
*Format Data
*Format Cache
*Format System
*Install zip from sd card
**if isnt work this again please try to install anyother rom and see what happen ...
downloaded the file from the official site ( http://download.cyanogenmod.com/?device=coconut&type=stable )
1. no i didn't format the system after wiping dalvik cache.
2. from where & how do i flash the kernel? i have downloaded the ROM & the Gapps.!
prds359 said:
downloaded the file from the official site ( http://download.cyanogenmod.com/?device=coconut&type=stable )
1. no i didn't format the system after wiping dalvik cache.
2. from where & how do i flash the kernel? i have downloaded the ROM & the Gapps.!
Click to expand...
Click to collapse
The kernel is the boot.img inside the zip. If you want to know how to flash it, check my guide on how to install a custom rom/kernel
And you could do the following:
1. Open the zip
2. Go to META-INF/com/google/android/
3. Open the updater-script using notepad ++
4. Delete the first 3 lines saying "assert getprop"
5. Save it and repack the zip
6. Flash it
Maybe it works then! :good:
mihahn said:
The kernel is the boot.img inside the zip. If you want to know how to flash it, check my guide on how to install a custom rom/kernel
And you could do the following:
1. Open the zip
2. Go to META-INF/com/google/android/
3. Open the updater-script using notepad ++
4. Delete the first 3 lines saying "assert getprop"
5. Save it and repack the zip
6. Flash it
Maybe it works then! :good:
Click to expand...
Click to collapse
did exactly what was described to your link to flash the kernel ..
it was successful.. but my phone is stuck to the Logo when am trying to turn it on ..
another problem is, in CWM menu the back key (power button) isn't working at all ..
what should i do next?
have attached the error screen.
Then flash a another kernal ,stuck on the logo happens coz the flashed kernal didnt support very well for ur android version.
Sent from my WT19i using xda premium
can you please suggest me a good ROM & kernel for WT19i please?
i was trying CM 9.1
Kernal-rege,kappa,lupus
Rom-honami i1,flawless ICS,next gen 7rom
Sent from my WT19i using xda premium
Arrow11 said:
Kernal-rege,kappa,lupus
Rom-honami i1,flawless ICS,next gen 7rom
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
okay so i flashed this ( http://forum.xda-developers.com/showthread.php?t=2167119 ) kernal ..
phone still won't work after logo sign ..
and am unable to access phone's memory card. ..
pc is't detecting it anymore!
what to do now?
prds359 said:
okay so i flashed this ( http://forum.xda-developers.com/showthread.php?t=2167119 ) kernal ..
phone still won't work after logo sign ..
and am unable to access phone's memory card. ..
pc is't detecting it anymore!
what to do now?
Click to expand...
Click to collapse
when sony logo appears plz start to press vol- rapidly..u can acces to recovery there..in there u can mount ur sd card using mount and storage option .if u cant acces to recovery u should flash this kernal http://forum.xda-developers.com/showthread.php?t=1398910
i recovered most of 4ns using rege kernal
no progress with rage kernal too! stuck to logo sign.
phone was running well before flashing any kernal.
is there any way to take it back to that position again?
**phone is rooted & boot-loader is unlocked.
prds359 said:
no progress with rage kernal too! stuck to logo sign.
phone was running well before flashing any kernal.
is there any way to take it back to that position again?
**phone is rooted & boot-loader is unlocked.
Click to expand...
Click to collapse
Flash the stock rom in flashmode using flashtool. If you don't know how to do that, use the search
Sent from my Nexus 4 running Android 4.3