I have been reading a lot of the forums here and for the fist time im a bit leary of rooting and flashing a rom on my phone. I had no problems doing it on all mt other android phones so before I proceed, I would like to ask a few questions. This is more towards Canadian users like the rogers users. Thats what I have.
1: seeing that a fair bit of users have lost their IMEI I was wondering if any rogers users have experienced this loss? If so, what did they do to get your IMEI lost?
2: Is this the best way to root my rogers phone?
[HOWTO] [ROOT] No Tripping Flash Counter - Updated [ATT / Bell / Telus / Rogers]
http://forum.xda-developers.com/showthread.php?t=1739426
3: If I stick to non asop or cm10 roms are my chances of loosing my IMEI very low?
Thank you for taking the time to read my post and hopefully answer the questions I have
Anyone?
Related
Ok guys so ive just bought a uk orange branded hero, and i dont have a clue about android or linux for that matter, so i hope you guys could answer a few questions for me, ive looked at the stickys in the android development section, and now im more confused than before lol
1) What is rooting? and what is the process ment to achieve?
2) like i said i have a uk orange branded hero, now what is the process i need to do before i can start flashing roms? it seems a little more complicated that just flashing hspl like am used to lol
root is the system administrator of a unix system. you might wanna google that if you don't know what it is.
depending on your fastboot version you need to flash the custom recovery image, from there on it is a piece of cake. if you don't need to downgrade your system then flashing the custom recovery is also a piece of cake.
mancsoulja said:
1) What is rooting? and what is the process ment to achieve?
2) like i said i have a uk orange branded hero, now what is the process i need to do before i can start flashing roms? it seems a little more complicated that just flashing hspl like am used to lol
Click to expand...
Click to collapse
You might have read THIS
Also read THIS
My intention is to give balanced advice to all those who intend to modify their new Android.
Ask yourselves, what do you intend to do with root access, if you want your phone to do all simple tasks, no need to root. I would say get familiar with new OS before deciding "Root Way."
mancsoulja said:
Ok guys so ive just bought a uk orange branded hero, and i dont have a clue about android or linux for that matter, so i hope you guys could answer a few questions for me, ive looked at the stickys in the android development section, and now im more confused than before lol
1) What is rooting? and what is the process ment to achieve?
2) like i said i have a uk orange branded hero, now what is the process i need to do before i can start flashing roms? it seems a little more complicated that just flashing hspl like am used to lol
Click to expand...
Click to collapse
Rooting is the process of gaining full system access to your device. This has pros and cons (you can modify anything and really tweak the guts of your system...but you can also truely fubar the whole thing a lot easier too). If you don't have a need to root, I generally advise against it.
Flashing custom ROMs are an unsupported method of customization...but it, like rooting, has some potential gains. Some ROMS give more speed, some ROMs include more features that you may or may not want. Flashing ROMs are the reasons most people root (as to flash the ROM, you need root access)
Thanx for all your help guys, i read all that info and spent the last 2 days learning lol 2day i sucsessfully downgraded my rom, routed and flashed modaco 2.9
Goodlad!
Excellent. Now please tell our forum members which road you drove to get to root, so that someone with same enthusiam can also do same. You dont have to write whole page, just majot points and references or links.
Thanks.
A friend of mine has just purchased the Atrix through Bell. I'm a Galaxy S user, but I've been trying to read up a little on the Atrix to help him out. I have 2 quick questions.
1) What is going on with all the Do-Not-Install-On-Bell-Atrix I'm seeing with all the Development threads? I'm sorry if this has been asked 100 times, but are there any ROM's that are compatible with the Bell Atrix?
2) If there are Bell Atrix ROMs, before flashing I'd like to know if there are any recovery methods for bricked devices or flashing gone wrong? Always good to have a backup plan I've found these 2 from the [REF], any advice on which you prefer?
http://forum.xda-developers.com/showthread.php?t=966405
http://forum.xda-developers.com/showthread.php?t=991072
Any other words of wisdom you'd like to share with a new Atrix user?
Thanks!
Actually..if your friend follows this thread http://forum.xda-developers.com/showthread.php?t=1070076 then he can actually install most of the same pseudo-roms everyone else can (as well as themes). So essentially there hasn't been much need for Bell specific roms (or other international specific) as of yet.
So I have learned that as of recently it is illegal to unlock my Verizon Galaxy S3. Well, too late. I followed this tutorial and installed the AxisM ROM.
Well about the same time I found this out I decided I was going to sell my phone on craigslist. I don't want to do anything illegal so I would like to restore it back to factory default before I sell it. Personally I never had any use for an unlock, I only wanted root. I looked around for information about how to un-unlock a phone and couldn't find anything on xda or google. Please don't just redirect me to some thread about how to flash to stock JellyBean 4.1.1 or something without explaining how / why your suggested method will remove unlock-carrier function. I am not very experienced with the details of all these modifications. Modding phones isn't really my hobby, I just blindly / drunkenly followed a tutorial. That is why I ask for an explanation - but if it turns out that merely flashing back to a stock JellyBean would remove the illegal function, that's great. Also, please don't bother trolling me with your legal advice / opinions, just keep it to yourself, I won't even read it.
tl;dr
How can I un-unlock my phone?
Well... with the risk of getting flamed... I really would like to get some advice Before I get started.
My Galaxy S3 is network locked to Three 3 Sweden. My first question... is this something I have to consider when rooting? I´m not concerned about warrantys and so on... my soul purpose is to get rid of some bloatware, ads and perhaps modifying a little. Not really flashing ROM´s as of yet, but who knows...
I would really like it if someone could point me in the right direction when it comes to files and so on, that I need.
My phone:
Android Version 4.1.2
Baseband I9300NELK2
Version 3.0.31-742798
Compilationnumber JZ054K.I9300XXELLA
Some hints and tips would be nice.
First time on a S3 but far from first phone to root.
=> General Section, stickies, how to root etc. all included in there
chrismast said:
=> General Section, stickies, how to root etc. all included in there
Click to expand...
Click to collapse
Yes I know... but my head question was legit:
My Galaxy S3 is network locked to Three 3 Sweden. My first question... is this something I have to consider when rooting?
Click to expand...
Click to collapse
That has nothing to do with network. Rooting and sim unlock are two different things.
I know there are a thousand threads on Rooting/Unlocking and Custom ROM's for the Atrix, because I've spent the last 3 days reading every one I could find. However, most of them appear to be very dated and often conflicting. As I'm coming to the game a little late I was hoping for some assistance on how to proceed.
Here's what I have;
AT&T Motorola Atrix 4G (I bought this new under contract, kept it for 2 years, upgraded to another phone and this one has been a paperweight for the past 18 months) AT&T will give me an unlock code if I ask, but I'm a little confused by the conflicting reports on whether to do it this way or not.
It's an MB860
FW Version 4.5.141
OS Version 2.3.6
Baseband N_01.77.37P
Webtop WT-1.2.0-110_OLY-6
Kernel Version 2.6.32.9
Build 4.5.141
I'd like to Unlock it so I can run a Foreign SIM card, I'd like to Root it so I can add non-approved apps, and I'd like to play with some ROM's, Redpill has some very good user reviews so I'm thinking of giving it a try but I'm not stuck on it.
Obviously don't want to brick the phone, so any advice would be appreciated, the more detailed the better
I have Windows 8.1, Mac OS X, and Windows XP-SP3 computers to work with.
Thanks in advance for any assistance.
While certain threads are (or might seem) outdated and/or conflicting, there are also other threads that serve as a kind of index of the most current methods and procedures. That should help you get around. Plus there are threads and guides written especially for noobs...
Yes, the code from AT&T is the safest and simplest way to do SIM unlock. Only important point here is that the device must be running the official Moto/AT&T firmware at the time of unlock. I'm not sure what kind of "conflicting information" you came across, to my knowledge nobody who's used the code as described never had any problems.
As for rooting, regardless of the variant or firmware version of your device, the preinstall method is the one to use. By far the most universal, plus personally and generally I dislike any "automatic", "one-click" or similar methods - for me at least they are usually more trouble than they're worth.
As for playing with ROMs, you first need to unlock your BL, then install a custom recovery, and then you have a shot at ROMs. So quite a wide topic with plenty enough threads created on the subject, so no point in repeating what's already said countless times. By the time you're done with other things mentioned (SIM unlock, rooting) you should be able to find your way around.
Sequence
ravilov said:
While certain threads are (or might seem) outdated and/or conflicting, there are also other threads that serve as a kind of index of the most current methods and procedures. That should help you get around. Plus there are threads and guides written especially for noobs...
Yes, the code from AT&T is the safest and simplest way to do SIM unlock. Only important point here is that the device must be running the official Moto/AT&T firmware at the time of unlock. I'm not sure what kind of "conflicting information" you came across, to my knowledge nobody who's used the code as described never had any problems.
Click to expand...
Click to collapse
Thanks for the quick reply. I've requested an unlock code from AT&T, should be good to go in 48 hours.
In the mean time, is it important that I have it unlocked before I root, or will it matter?
Update
I realize this may seem to be off-topic but I'm not asking for assistance with this newest update, I'm only using the experience to help clarify my concerns about the Atrix.
Waiting for my requisite 24 hours before unlocking the SIM on my Moto Atrix. While I'm waiting i decided to gain a little experience by rooting a Galaxy S5570 and installing a custom Rom.
Like the Atrix there are dozens if not hundreds of threads, videos, tutorials etc for how to accomplish this. I found the most recent one I could that seemed to be a complete tutorial and it was dated from January of this year (much newer than any threads I've found on the Atrix BTW)
Rooting went fine. Confirmed with a Root Test app.
Loaded a CWM 6.0.4.5 recovery package as instructed and ended up bricking the phone. By all accounts this tutorial was for the exact model of phone with the exact same FW and Android version.
This is no big loss as it was a cheap phone that I wasn't using anyway, but it certainly opened my eyes to the risks involved in attempting this procedure on the more costly Atrix.
I'd really appreciate if anyone could point me in the direction of a current procedure for Rooting, Unlocking the Bootloader and installing a custom ROM on the Atrix with the specs from my Original Post. If any of you have the same phone and had success following a particular procedure I would greatly appreciate some links.
I know how forums work, and I know there are always the guys that reply RTFM to every noobs questions, as someone with technical skills in other areas I can generally tell the difference between someone who just doesn't want to bother doing the Due Diligence and someone who is struggling to sort through the myriad solutions to find the one that's right. I really don't want to brick this phone so any pointed advice would be greatly appreciated.
arkansascontrols said:
I realize this may seem to be off-topic but I'm not asking for assistance with this newest update, I'm only using the experience to help clarify my concerns about the Atrix.
Waiting for my requisite 24 hours before unlocking the SIM on my Moto Atrix. While I'm waiting i decided to gain a little experience by rooting a Galaxy S5570 and installing a custom Rom.
Like the Atrix there are dozens if not hundreds of threads, videos, tutorials etc for how to accomplish this. I found the most recent one I could that seemed to be a complete tutorial and it was dated from January of this year (much newer than any threads I've found on the Atrix BTW)
Rooting went fine. Confirmed with a Root Test app.
Loaded a CWM 6.0.4.5 recovery package as instructed and ended up bricking the phone. By all accounts this tutorial was for the exact model of phone with the exact same FW and Android version.
This is no big loss as it was a cheap phone that I wasn't using anyway, but it certainly opened my eyes to the risks involved in attempting this procedure on the more costly Atrix.
I'd really appreciate if anyone could point me in the direction of a current procedure for Rooting, Unlocking the Bootloader and installing a custom ROM on the Atrix with the specs from my Original Post. If any of you have the same phone and had success following a particular procedure I would greatly appreciate some links.
I know how forums work, and I know there are always the guys that reply RTFM to every noobs questions, as someone with technical skills in other areas I can generally tell the difference between someone who just doesn't want to bother doing the Due Diligence and someone who is struggling to sort through the myriad solutions to find the one that's right. I really don't want to brick this phone so any pointed advice would be greatly appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1302423
I just did it with my old A4G. No issues exist in procedure.
Motorola Atrix KCC-MB860- rom
please anyone send me a link to download rom for this model (Motorola Atrix 4G KCC-MB860- rom)
manoj panay said:
please anyone send me a link to download rom for this model (Motorola Atrix 4G KCC-MB860- rom)
Click to expand...
Click to collapse
Meanwhile you have ROMs all over the place here in the Atrix 4G section of xda that you are not going to go download, rather you are going to request a ROM for the phone instead. Head over to the development section and download a ROM instead of requesting the necessary resources that are already available to you.
Sent from my ATRIX HD using XDA Free mobile app
help me recover my phone
i downloaded and tried to flash with lots of rom.... non of them was working with this model .... please help me. . . . i was rooted and unlocked the boot loader and erased the original rom to flash the downloaded rom . . . know non of the rom in this site is working and in my phone only hardware is remaining, i mean it is not bricked , i can boot it and i can go to fastboot mode, android recovery mode, rsd mode,, atc.... actually i want suitable ram for that model so please......
my phone model: kcc-cmm-mot-w-mb860-0211 ( and all the remaining thing are written in Chinese ) it is a unlocked phone and am using in india . . .