Related
My phone was dropped earlier however only the glass is cracked, not the actual screen. Everywhere I look, they only sell them as a pair, but I remember awhile back seeing just the glass for a reasonable price.
Where can I get it now?
Thanks!
Here's a glass replacement for $12.80 (Free Shipping)... CLICK HERE
Instructional Video:
Note: This video uses a Fascinate, but the steps taken should be similar to replacing the Vibrant's screen.
Thanks so much!
No problem. Hope you get your phone back up & running.
How come people charge like $100 to replace...?
Sent from my SGH-T959 using xda premium
VeryCoolAlan said:
How come people charge like $100 to replace...?
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Because that 'replacement glass' is a scam not a digitizer. It will not fit properly and will not function as a digitizer. If you look at the video, the removed digitizer has some wires on it. That allows communication w/ the motherboard. That glass is just glass. Even if you could remove the broken touch panel (digitizer) and fit the glass to the phone you would have no ability to use it.
The digitizers for all amoled Galaxy S phones are not available without the attached display panel. The replacement screen costs $95 just for the part, then add the labor and that is why it is so expensive.
If you notice, even the people who made the video (while showing the removal) don't sell the digitizer alone. Pro shops replace the whole assembly. If you can get the job done for $100 including labor, take it. It's a great price.
ChauncyG said:
Because that 'replacement glass' is a scam not a digitizer. It will not fit properly and will not function as a digitizer. If you look at the video, the removed digitizer has some wires on it. That allows communication w/ the motherboard. That glass is just glass. Even if you could remove the broken touch panel (digitizer) and fit the glass to the phone you would have no ability to use it.
The digitizers for all amoled Galaxy S phones are not available without the attached display panel. The replacement screen costs $95 just for the part, then add the labor and that is why it is so expensive.
If you notice, even the people who made the video (while showing the removal) don't sell the digitizer alone. Pro shops replace the whole assembly. If you can get the job done for $100 including labor, take it. It's a great price.
Click to expand...
Click to collapse
I just need the glass.
I've seen some other videos and I got it down. All you do is take the glass and remove it from the amoled screen then replace. I don't need a digitizer.
Sent from my SGH-T959 using xda premium
So wait, you can't just replace the glass? In the video they remove the glass from the digitizer. Right?
Sent from my SGH-T959 (Samsung Vibrant)
N00B_IN_N33D said:
Wow, I had no idea. I've never taken apart my phone before, but when I came across the glass replacement on Ebay it looked very legit. 99.4% positive feedback, 34 sold, and 7 day money back... But I guess looks can be deceiving. I figured the wire was hidden from view in the picture. I apologize for posting a link to a scam...
Sent from my SGH-T959 (Samsung Vibrant)
Click to expand...
Click to collapse
Not a problem. Unless you have done any repair work on these things you would not know. Most non oled display phones have the ability to replace touch screen and lcd displays individually. Unfortunately, not ours.
This scam works because most people that buy the glass never really get around to installing it, or if they do and it does not work they think they did something wrong. I have repaired a bunch of these things even if you could remove the digitizer sucessfully as shown in the DirectFix video, you can't get a replacement part. Also, this operation needs to be done in a clean room. Any dust on the amoled panel will bruise it when paired with the touch panel so a successful repair is very unlikely outside of the factory. That is why the repair parts are sold together as a unit.
N00B_IN_N33D said:
So wait, you can't just replace the glass? In the video they remove the glass from the digitizer. Right?
Sent from my SGH-T959 (Samsung Vibrant)
Click to expand...
Click to collapse
Yea that's what I saw....
And yes just the glass...since I'm gonna be with this phone for a few more months I need to replace and this is really cheap!
Sent from my SGH-T959 using xda premium
VeryCoolAlan said:
Yea that's what I saw....
And yes just the glass...since I'm gonna be with this phone for a few more months I need to replace and this is really cheap!
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
You can't 'just replace the glass'. The digitizer and front glass are one and the same. They are inseparable.
---------- Post added at 12:55 AM ---------- Previous post was at 12:53 AM ----------
N00B_IN_N33D said:
So wait, you can't just replace the glass? In the video they remove the glass from the digitizer. Right?
Sent from my SGH-T959 (Samsung Vibrant)
Click to expand...
Click to collapse
What you saw was the digitizer/glass being removed from the AMOLED panel. So, as stated before, no, you can't just replace the glass.
FML. -_-
Sent from my SGH-T959 using xda premium
Call me crazy but if people are buying these and not complaining they don't work. Then either they don't want to look stupid by saying they got scammed or they did replace the glass and is possible. I say it's possible but very hard since the thickness is about that of a piece of paper. I saw this on wiki for the superamoled little confusing.
Super Active-Matrix Organic Light-Emitting Diode or Super AMOLED is a display technology (variant from AMOLED) mainly for use in mobile devices such as mobile phones (see the list below for examples). One of the main differences from other display technologies is that the layer that detects touch is integrated into the screen rather than being overlaid on top.
Click to expand...
Click to collapse
Anyone? Is that saying the display (lcd screen) has the digitizer built in the screen itself?
Mandown said:
Call me crazy but if people are buying these and not complaining they don't work. Then either they don't want to look stupid by saying they got scammed or they did replace the glass and is possible. I say it's possible but very hard since the thickness is about that of a piece of paper. I saw this on wiki for the superamoled little confusing.
Anyone? Is that saying the display (lcd screen) has the digitizer built in the screen itself?
Click to expand...
Click to collapse
They are integral but can be separated.... just not rejoined and still work. Notice that the places that show the removal videos DO NOT sell a replacement part, just the entire screen. Most of the glass that is sold as a replacement is purchased from overseas. It costs more to return it than what was spent to purchase it. They are ALL worthless. If there are not wires coming from it it can't be a digitizer. If you remove your broken digitizer and are lucky enough not to destroy you amoled panel you still have nothing to replace it with. Most if not all people who buy these things never get around to attempting the replacement, or if they do, they destroy the panel in the process so they never get the chance see that the glass does not work. They think they screwed it up instead of being ripped off. That's why you don't see negative feedback about those things.... It's the perfect (almost) scam.
If you want to replace your glass buy the entire assembly ($95.00) on eBay and at the end of the process you will have a great phone again instead of a pile of junk.... not to mention feeling like you screwed up your phone.
Well what I'm going to do is wait for my brother to go to Verizon then take his vibrant and use his screen and mess with mine. Though I need to buff out the scratches. If by some miracle I do make it work I will post here. I hate when people find a way to fix something that some of us are trying to figure out and never report back how or just say "I fixed it was simple." WTF WAS IT! had to deal with that with my plasma which I finally did find one thread and fix it.
Sent from my Vibrant using xda premium, running ICS Passion v10.6 OH YEAH!
Digitizer and glass are factory glued together under high temperatures impossible to separate.
Just buy the whole assembly for $90 ( i've seen them for $79 once) with free shipping and tools on ebay. I always send offers using ebay "ask a question" and sometimes they give me few $$ off. Then it is a piece of cake since you can brake off the glass and remove the whole assembly that way.
My personal Vibrant is made of all kinds of used Vibrants and screen assembly comes from Galaxy S 4G which is good replacement too if you also want to get front facing camera.
technically can be done
while i don't recommend anyone else try, I was able to separate the glass from the screen. the glass was cracked but the screen still worked so i bought just the glass thinking it would be an easy replacement. so when i came to find them glued together i used my hot-air gun to melt the glue and remove to broken pieces of glass one by one, very carefully. when putting it back together with the new glass i couldn't re-glue it but the back tray holds the screen in place well enough. there was only one side effect that i have noticed so far. the glass is a little loose since not held to the screen, and i did burn the screen a little bit with the heat gun and it now has minor discoloration. but it is possible with enough patience and a steady hand.
afx420 said:
while i don't recommend anyone else try, I was able to separate the glass from the screen. the glass was cracked but the screen still worked so i bought just the glass thinking it would be an easy replacement. so when i came to find them glued together i used my hot-air gun to melt the glue and remove to broken pieces of glass one by one, very carefully. when putting it back together with the new glass i couldn't re-glue it but the back tray holds the screen in place well enough. there was only one side effect that i have noticed so far. the glass is a little loose since not held to the screen, and i did burn the screen a little bit with the heat gun and it now has minor discoloration. but it is possible with enough patience and a steady hand.
Click to expand...
Click to collapse
Any follow up on this?
Any video/help for broken galaxy s1 i9000 glass?.
I meam the front thing as i understand its just a piece of glass and not a touchscreen. But for the phone you talk about its a touchscren and not just a glass
Hello all
So my mum just dropped her phone and the wonderful gorilla glass didnt do its job and now has a big crack in it.
The phone still fully works its seems to like there is an outer screen?
Any ideas on how to fix i looked on ebay but looks very pricey? Sonething about a digitizer?
Picture attached.
Any help or adivce on where to look would be most appreciated.
Kindest regards
Superliam
Sent from my GT-I9300 using xda premium
You are basically screwed. Mine had shattered and I ordered a new piece of glass for the front. The digitizer is stuck to the glass pretty damn good, I ended up having to order a new frame unit for 250.
I would just put a new screen protector on it and leave it.
You will only be looking at an expensive fix, screens for this phone cost a lot, wether you fix it your self or send it to Sammy and this is not covered by warranty.
The digitizer is the component that recognises touches and translates them to digital signals the phone understands.
I'm not sure about this phone but on my old one it was on top of the screen which I would also expect here.
If I was you I would send the phone to Sammy but I couldn't give you a price.
Sent from my GT-I9300 using xda premium
http://www.youtube.com/watch?v=_70-W9JjVjg&feature=youtube_gdata_player
Sent from my GT-I9300 using xda premium
House insurance?
Sent via TCP/IP
The screen and touch digitiser are bonded together like on iPhone and there's no third party screens yet so you either pay $250 or do without a screen.
My ear speaker went out and cash short (to buy a phone full price to maintain VZ unlimited) so replaced it myself for $5. Now the screen has banding of lines on the top half and is fuzzy like half of the pixels are not working. I suspected the ribbon cable for the screen came loose so seated it firmly (didn't remove it to repair the speaker) but no luck.
Is this damage from perhaps twisting the screen in the process to get the frame off of it or typical ribbon cable issue?
Thanks for the help!
FJ40dan said:
My ear speaker went out and cash short (to buy a phone full price to maintain VZ unlimited) so replaced it myself for $5. Now the screen has banding of lines on the top half and is fuzzy like half of the pixels are not working. I suspected the ribbon cable for the screen came loose so seated it firmly (didn't remove it to repair the speaker) but no luck.
Is this damage from perhaps twisting the screen in the process to get the frame off of it or typical ribbon cable issue?
Thanks for the help!
Click to expand...
Click to collapse
Sounds to me like the damage was caused either when you twisted the screen to get the frame off or maybe something didn't get fully tightened back down and is applying some pressure into the back of the LCD... causing this to happen.
I doubt it would be a ribbon cable issue.
Sent from my ADR6400L using xda premium
RBarnett09 said:
Sounds to me like the damage was caused either when you twisted the screen to get the frame off or maybe something didn't get fully tightened back down and is applying some pressure into the back of the LCD... causing this to happen.
I doubt it would be a ribbon cable issue.
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
Thanks RB. I think then I did it taking it apart the frame was hell to get off.
Not sure what to do not a good time to get a new screen. Maybe I can get a follower who moved on to new phone to send their old bolt along for parts.
Cheers,
FJ40dan said:
Thanks RB. I think then I did it taking it apart the frame was hell to get off.
Not sure what to do not a good time to get a new screen. Maybe I can get a follower who moved on to new phone to send their old bolt along for parts.
Cheers,
Click to expand...
Click to collapse
Hope you get it figured out man.
Those LCDs aren't cheap for this phone.
I use an exacto knife and heat to separate adhesives, but I know not everyone has an exacto knife. Just for future reference, you can pick them up pretty much anywhere in the art section for only a few bucks. I highly recommend them when replacing parts.
Good luck finding another LCD.
Sent from my ADR6400L using xda premium
RBarnett09 said:
Hope you get it figured out man.
Those LCDs aren't cheap for this phone.
I use an exacto knife and heat to separate adhesives, but I know not everyone has an exacto knife. Just for future reference, you can pick them up pretty much anywhere in the art section for only a few bucks. I highly recommend them when replacing parts.
Good luck finding another LCD.
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
Either that or buy a screen with the toolkit. I watched videos of the people with the toolkit and it helps tremendously. Plus, it's made of plastic so there is less of a chance to mess the new one up when you install it.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
Either that or buy a screen with the toolkit. I watched videos of the people with the toolkit and it helps tremendously. Plus, it's made of plastic so there is less of a chance to mess the new one up when you install it.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
Yeah, the toolkit helps a ton. I have a few myself that I always use when repairing.
Sent from my ADR6400L using xda premium
So a friend of mine recently shattered her note 2... what are her options in going about getting this fixed/replaced?
As the title states the screen, digitizer, and glass is shattered.
Screen and Digitizer come as one unit, so even if only the glass was broken, you'd need to replace both. You can fix it, but it requires a lot of work disassembling the phone. There are a few how to videos on Youtube for it. Also, the displays aren't cheap. Last I saw, they were >$200 for a new display.
Yea best option is for her to use insurance claim for device. Its $99 and in most cases cheaper than getting it fixed. I recently shattered my screen and replaced the phone thru asurion. Here in houston cell phone repair stores wanted $140 to repair.
Sent from my SCH-I605 using xda app-developers app
imnuts said:
Screen and Digitizer come as one unit, so even if only the glass was broken, you'd need to replace both. You can fix it, but it requires a lot of work disassembling the phone. There are a few how to videos on Youtube for it. Also, the displays aren't cheap. Last I saw, they were >$200 for a new display.
Click to expand...
Click to collapse
Not true. My uncle changed just the glass yesterday. Didn't change the digitizer and everything works great. Glass was $15 from amazon
Sent from my SCH-I605 using xda app-developers app
jrmiller125 said:
Not true. My uncle changed just the glass yesterday. Didn't change the digitizer and everything works great. Glass was $15 from amazon
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Yeah he's right..I smashed my screen and bought just the bezel of eBay then tried to heat up the front like everyone does and pull the glass away but, the glass and screen came up and then the digitizer broke. Just get it replaced its not worth trying to fix it yourself.
Sent from my SCH-I605 using xda premium
If digitizer is broken you have to send to Samsung for repair. Samsung repaired my screen+digitizer on my S3 for $140.
Having never changed a screen before my uncle got his changed in an hour or so. Just used a heat gun and pried it off. Taped the new one back on. Even switched to white in the process
You can change the front glass by itself, but if the screen or digitizer are broken, then you have to get all 3 together, at least from everything I've seen. For the OP, it's not going to be a cheap fix no matter what is done, but insurance will be cheapest, if available.
Samsung will replace the whole screen for $179. That includes parts labor and shipping both ways.
I made a video on youtube.com/outleradam about repairing the screen with a new one.
AdamOutler said:
I made a video on youtube.com/outleradam about repairing the screen with a new one.
Click to expand...
Click to collapse
Adam, your video doesn't show about 2/3 of the process. It is just a black video screen.
Chocu1a said:
Adam, your video doesn't show about 2/3 of the process. It is just a black video screen.
Click to expand...
Click to collapse
can someone confirm all i need is one of these
http://www.ebay.com/itm/Titanium-Gr...e_Replacement_Parts_Tools&hash=item20d324b8f3
http://www.ebay.com/itm/Titanium-Re...e_Replacement_Parts_Tools&hash=item257cbdc01e
Only the glass is broken, the rest of the phone works perfectly.
and maybe should the best video my way of how to replace it
The reason you want to purchase the screen with the digitizer is that is is very hard to put the glass on the digitizer with double sided adhesive tape that all sellers of the glass alone don't provide. So most end up trying and get this.
then end up buying the them combined. Good luck but asurion is the cheapest rout for most.
Sent from my SCH-I605 using xda app-developers app
Well I did one last week that was successful but I was practicing on one with a broken digitizer so it was no good anyway. I broke it. This one seemed more hard to separate from the lcd. I don't know why. The lcd lifted from the housing and I didnt use much heat at all. But I'll post pictures for anyone who would like to attempt this. You can see on the pic with the tool how thin the glass is and where the lcd lifted from the housing.
Sent from my SCH-I545 using xda app-developers app
Oh yea.you have to be extra careful of that flex cable connecting to the lcd which is exposed
Sent from my SCH-I545 using xda app-developers app
warriorpluto said:
Well I did one last week that was successful but I was practicing on one with a broken digitizer so it was no good anyway. I broke it. This one seemed more hard to separate from the lcd. I don't know why. The lcd lifted from the housing and I didnt use much heat at all. But I'll post pictures for anyone who would like to attempt this. You can see on the pic with the tool how thin the glass is and where the lcd lifted from the housing.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
I was looking for a thread to post this in, this may be the right place as you may have an idea, since you just installed a mega screen.
I cracked my mega screen last night, originally the phone was still working. In about half an hour the screen wasn't registering swipes, so I can't even unlock the screen. I dropped the phone in the rain so I'm not sure if it's simply the screen or if water has gotten in to the cracks?
Anyways, I am trying to make a decision on wether to sell my broken phone to Mazuma mobile and get around $120 back, or wether it's worth trying to get fixed. I'm not confident fixing phones, so ordering in the screen and attempting it is not an option. What I want to know, is what are the chances of a local repair shop being able to source a mega screen, and fix it, for a decent cost that would make getting it fixed the better option? Since you have just installed a screen I figure you at least know how much the part is
You can buy the lcd screen + digitizer which comes all pre-assembled and all you have to do it swap the whole screen + digitizer out as one unit..this way no fear of breaking anything..i see one on ebay for $158.00 US for the mega 6.3 i9200..but i think it will also work on the other 6.3 mega models..as they must all be the same that way...but i am not 100% sure on that. :good:
leetrevor81 said:
I was looking for a thread to post this in, this may be the right place as you may have an idea, since you just installed a mega screen.
I cracked my mega screen last night, originally the phone was still working. In about half an hour the screen wasn't registering swipes, so I can't even unlock the screen. I dropped the phone in the rain so I'm not sure if it's simply the screen or if water has gotten in to the cracks?
Anyways, I am trying to make a decision on wether to sell my broken phone to Mazuma mobile and get around $120 back, or wether it's worth trying to get fixed. I'm not confident fixing phones, so ordering in the screen and attempting it is not an option. What I want to know, is what are the chances of a local repair shop being able to source a mega screen, and fix it, for a decent cost that would make getting it fixed the better option? Since you have just installed a screen I figure you at least know how much the part is
Click to expand...
Click to collapse
If you get the lcd and digitizer together, you can fix yourself and it's easy just as star master says. If you have a shop nearby they can replace just the glass
Sent from my SCH-I545 using xda app-developers app
leetrevor81 said:
I was looking for a thread to post this in, this may be the right place as you may have an idea, since you just installed a mega screen.
I cracked my mega screen last night, originally the phone was still working. In about half an hour the screen wasn't registering swipes, so I can't even unlock the screen. I dropped the phone in the rain so I'm not sure if it's simply the screen or if water has gotten in to the cracks?
Anyways, I am trying to make a decision on wether to sell my broken phone to Mazuma mobile and get around $120 back, or wether it's worth trying to get fixed. I'm not confident fixing phones, so ordering in the screen and attempting it is not an option. What I want to know, is what are the chances of a local repair shop being able to source a mega screen, and fix it, for a decent cost that would make getting it fixed the better option? Since you have just installed a screen I figure you at least know how much the part is
Click to expand...
Click to collapse
And don't sell. $120 is a freaking rip off
Sent from my SCH-I545 using xda app-developers app
warriorpluto said:
And don't sell. $120 is a freaking rip off
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
How much do you think it would go for on ebay? (or somewhere else) I didn't think a damaged phone would be worth selling?
That phone is still with over $200 as is.just the good motherboard alone. Especially if it had a clean imei number..then counting other parts of the phone too
Sent from my SCH-I545 using xda app-developers app
Good tutorial how to fix it
There is some kind of double side transparent adhesive between LCD and digitizer. So good luck
Opened front glass
Hi, I opened front glass of Mega 5.8 to clean the dust inside it. When I put it back, the touch is not working. Earlier it was working perfectly, I did not remove any cables. Also that I cleaned it with dry cloth while the phone was on.
What may be the issue?
warriorpluto said:
Oh yea.you have to be extra careful of that flex cable connecting to the lcd which is exposed
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
How does it separate?
warriorpluto said:
Well I did one last week that was successful but I was practicing on one with a broken digitizer so it was no good anyway. I broke it. This one seemed more hard to separate from the lcd. I don't know why. The lcd lifted from the housing and I didnt use much heat at all. But I'll post pictures for anyone who would like to attempt this. You can see on the pic with the tool how thin the glass is and where the lcd lifted from the housing.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Hi,
I've never worked on one of these before but I have repaired many GS3, GS4, Note 2 with no problems. You successfully repaired one so my question is, is the optical adhesive like the GS3 where it rubs off with your finger? I've noticed a difference in GS3 & GS4 adhesive the GS4 is more difficult to clean off digitizer.
That yellow flex cable in your pic looks like a Digitizer flex. The layers are LCD (bottom) / Digitizer (sits on top of LCD so center) / Glass (top which is what our finger touches).
I have a Mega coming in tomorrow and the customer bought just the glass online. I'll see if I can separate. If you have any questions let me know I have repaired many a phones.
Did you get it?
ReyesARG said:
Hi,
I've never worked on one of these before but I have repaired many GS3, GS4, Note 2 with no problems. You successfully repaired one so my question is, is the optical adhesive like the GS3 where it rubs off with your finger? I've noticed a difference in GS3 & GS4 adhesive the GS4 is more difficult to clean off digitizer.
That yellow flex cable in your pic looks like a Digitizer flex. The layers are LCD (bottom) / Digitizer (sits on top of LCD so center) / Glass (top which is what our finger touches).
I have a Mega coming in tomorrow and the customer bought just the glass online. I'll see if I can separate. If you have any questions let me know I have repaired many a phones.
Click to expand...
Click to collapse
I wonder how was it going with your repair?
http://www.witrigs.com/samsung-galaxy-mega-replacement-parts
Adhesive is a problem
letus1 said:
I wonder how was it going with your repair?
Click to expand...
Click to collapse
Hey,
No good. The LCD was lifting off the frame which is a guarantee to break on such a large device. Also the adhesive is not the same as the GS3, it doesn't separate as easy. I stopped after I noticed the optical adhesive was not the same so do not attempt to "Lift Separate"
The best way to remove this digitizer is with a hot plate & (.10mm) molybdenum wire and slowly drag the wire between the LCD & Digi while face down on hotplate.
ReyesARG said:
Hey,
No good. The LCD was lifting off the frame which is a guarantee to break on such a large device. Also the adhesive is not the same as the GS3, it doesn't separate as easy. I stopped after I noticed the optical adhesive was not the same so do not attempt to "Lift Separate"
The best way to remove this digitizer is with a hot plate & (.10mm) molybdenum wire and slowly drag the wire between the LCD & Digi while face down on hotplate.
Click to expand...
Click to collapse
If i separated the digitizer and the glass ftom the lcd, than can i bound the new one with LOCA or will that damage the LCD?
ReyesARG said:
Hey,
No good. The LCD was lifting off the frame which is a guarantee to break on such a large device. Also the adhesive is not the same as the GS3, it doesn't separate as easy. I stopped after I noticed the optical adhesive was not the same so do not attempt to "Lift Separate"
The best way to remove this digitizer is with a hot plate & (.10mm) molybdenum wire and slowly drag the wire between the LCD & Digi while face down on hotplate.
Click to expand...
Click to collapse
I knew that was the only way to do it, with hot plate and fishing pole string. I'm sure it's a slow process. I'll have to invest in a good hot plate.
Sent from my SM-N900V using xda app-developers app
No huge investment needed, I use a standard electric pancake griddle which can be bought for around $20. Good, even heat. I've never tried the fishing line method but a pair of business cards does the job very well. I get it started with a dull razor blade in the corner and as soon as I see the glass separating, I slide a business card in behind it. Do the same for the other side. On these big screens, slide the cards down a bit, lay it down on heat, repeat. The trick to not busting the LCD is to keep the heat on it and take your time.
My temperature is set to 200 farenheit. Not sure off hand what that converts to in celsius. Ideally, you don't want the surface to pass 120 celsius. If in doubt, start low and increase temp slowly until the glue softens enough.
The glue we're taking about is LOCA[liquid optically clear adhesive] and is UV activated. It can be bought online pretty cheap. If you're going to replace the glass, go ahead and use the LOCA when putting the new glass on. I've seen sensitivity issues on glass that doesn't have the glue between it and the LCD. If you use the glue be sure to remove EVERYTHING from the frame including cameras, speakers, buttons and mics as it can get messy and go pretty much everywhere. To activate the glue you can literally take it outside on a sunny day and it will cure fairly quickly, about 5 mins or so. To remove it from unwanted areas just use a toothpick, toothbrush, and some rubbing alcohol. I've done it dozens of times this way and it always comes out looking factory fresh
VirtueToVice said:
No huge investment needed, I use a standard electric pancake griddle which can be bought for around $20. Good, even heat. I've never tried the fishing line method but a pair of business cards does the job very well. I get it started with a dull razor blade in the corner and as soon as I see the glass separating, I slide a business card in behind it. Do the same for the other side. On these big screens, slide the cards down a bit, lay it down on heat, repeat. The trick to not busting the LCD is to keep the heat on it and take your time.
My temperature is set to 200 farenheit. Not sure off hand what that converts to in celsius. Ideally, you don't want the surface to pass 120 celsius. If in doubt, start low and increase temp slowly until the glue softens enough.
The glue we're taking about is LOCA[liquid optically clear adhesive] and is UV activated. It can be bought online pretty cheap. If you're going to replace the glass, go ahead and use the LOCA when putting the new glass on. I've seen sensitivity issues on glass that doesn't have the glue between it and the LCD. If you use the glue be sure to remove EVERYTHING from the frame including cameras, speakers, buttons and mics as it can get messy and go pretty much everywhere. To activate the glue you can literally take it outside on a sunny day and it will cure fairly quickly, about 5 mins or so. To remove it from unwanted areas just use a toothpick, toothbrush, and some rubbing alcohol. I've done it dozens of times this way and it always comes out looking factory fresh
Click to expand...
Click to collapse
What kind of griddle? This is the one without the edges right?
Sent from my SM-N900V using xda app-developers app
starmaster10 said:
You can buy the lcd screen + digitizer which comes all pre-assembled and all you have to do it swap the whole screen + digitizer out as one unit..this way no fear of breaking anything..i see one on ebay for $158.00 US for the mega 6.3 i9200..but i think it will also work on the other 6.3 mega models..as they must all be the same that way...but i am not 100% sure on that. :good:
Click to expand...
Click to collapse
I like this..
fixxforyou said:
May i ask how much for this glass?
Click to expand...
Click to collapse
Who give your answer ? Mention it..