I just saw this on Reddit; might be old news to some, but this is the first I've heard about it. Apparently there is a $1.38 (on Amazon.com) cable that allows you to connect various USB devices, and if the device supports USB OTG, you can run flash or powered hard (not portable) drives, keyboards, mice, or even a hub to use more than one. If the device doesn't, it can be added with root, or included in a ROM. I'm not a developer. I'm not even a programmer, so I don't have the first idea on how this could be done. But a Bluetooth keyboard is around $80, and this will allow a $10 keyboard to be used, or a $10 mouse, for a cost of about $12 for one, $22 for both, plus whatever a hub goes for. So having USB OTG could save some folks a lot of money. Plus if they want to use a USB controller for gaming, they can save the cost of a PS3 controller entirely (about $40).
http://forum.xda-developers.com/showthread.php?t=1240082
Please use the search feature. This is not a development topic because support already exists. I detail everything necessary for USB OTG on the Photon in the link below.
http://forum.xda-developers.com/showpost.php?p=28552795&postcount=2
MODS: This is not a development topic. Please move to Q&A or Accessories. Thanks!
There is a report button. The message goes directly to the Moderator. I would like if someone else would do it too and not only me.
This one is reported already.
peetr_ said:
There is a report button. The message goes directly to the Moderator. I would like if someone else would do it too and not only me.
This one is reported already.
Click to expand...
Click to collapse
Done.
peetr_ said:
There is a report button. The message goes directly to the Moderator. I would like if someone else would do it too and not only me.
This one is reported already.
Click to expand...
Click to collapse
zansatsu said:
Done.
Click to expand...
Click to collapse
Also reported...
Do not spam him. One is enough.
Thanks for the information. Did not know the topic was off limits - noted for future reference. Cheers!
Sent from my MB855 using xda app-developers app
Dark Reality said:
Thanks for the information. Did not know the topic was off limits - noted for future reference. Cheers!
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
After reading my response and the subsequent responses, I realize that it probably came off flame-ish. My apologies. It wasn't so much the topic as it was posted in the dev forum. They frown on that, unfortunately.
I am open to questions if you have any regarding USB OTG. I had to mess around with various USB configurations until I found the right connections. When it works, it just works. But figuring it out from a Youtube video in another language made me want to write a guide. I hope it helps.
Good luck!
Well, I have a USB OTG cable coming at some point in the next week. I only paid 90¢ for it on Amazon, so it's not a huge loss if it doesn't work. I will consult your guide when I get it, if it doesn't just work. Obviously I'm gonna hook it up and try it as soon as I get the package.
I have two devices intended for it -- a 10" mini keyboard I got on Newegg for $15 (shipped). If I can't get this to work at all (and I'm sure I will be able to), I can use the keyboard for our bedroom computer, which has a half-broken, dirty, unwieldy "ergonomic" keyboard hooked up to it (and toss that one). Also a wired Xbox 360 controller, for mobile gaming.
Dark Reality said:
Well, I have a USB OTG cable coming at some point in the next week. I only paid 90¢ for it on Amazon, so it's not a huge loss if it doesn't work. I will consult your guide when I get it, if it doesn't just work. Obviously I'm gonna hook it up and try it as soon as I get the package.
Click to expand...
Click to collapse
The Chainfire program should be able to step you through the diagnostics of it. The biggest trick is getting enough power supplied to the phone plus the devices.
Dark Reality said:
I have two devices intended for it -- a 10" mini keyboard I got on Newegg for $15 (shipped). If I can't get this to work at all (and I'm sure I will be able to), I can use the keyboard for our bedroom computer, which has a half-broken, dirty, unwieldy "ergonomic" keyboard hooked up to it (and toss that one). Also a wired Xbox 360 controller, for mobile gaming.
Click to expand...
Click to collapse
Any device that fully implements the standard USB HID protocol should just plug and play. A wired XBOX 360 controller should work, as well as the keyboard... as long as they don't require proprietary software/drivers to operate properly.
For my gaming solution, I went with the Sixaxis drivers for pairing with a PS3 controller through Bluetooth. That was pretty neat and it works. As far as keyboards, I have a wireless Logitech K400 with a touchpad which is fully functional. Using the one USB dongle which uses Logitech's 'Unifying' technology, I also have a Logitech M570 trackball mouse. So essentially, I carry a pocket-sized computer with me everywhere I go. Who needs a laptop?
Self-Powered USB Hubs work great with this setup, you can have multiple devices and Android (being based on Linux) will handle it as long as the kernel has the drivers built in. I've been having trouble trying to get external storage to work under CM7, but I also haven't been working to figure that out.
zansatsu said:
The Chainfire program should be able to step you through the diagnostics of it. The biggest trick is getting enough power supplied to the phone plus the devices.
Any device that fully implements the standard USB HID protocol should just plug and play. A wired XBOX 360 controller should work, as well as the keyboard... as long as they don't require proprietary software/drivers to operate properly.
For my gaming solution, I went with the Sixaxis drivers for pairing with a PS3 controller through Bluetooth. That was pretty neat and it works. As far as keyboards, I have a wireless Logitech K400 with a touchpad which is fully functional. Using the one USB dongle which uses Logitech's 'Unifying' technology, I also have a Logitech M570 trackball mouse. So essentially, I carry a pocket-sized computer with me everywhere I go. Who needs a laptop?
Self-Powered USB Hubs work great with this setup, you can have multiple devices and Android (being based on Linux) will handle it as long as the kernel has the drivers built in. I've been having trouble trying to get external storage to work under CM7, but I also haven't been working to figure that out.
Click to expand...
Click to collapse
Thanks
Sent from my MB855 using xda premium
Related
I was curious if any on here have used this app? I love the developer (have his SpeedHUD app)..... If anyone can does use it, I would love your opinion. I am hesitant to spend much on a bluetooth OBD tool. I think the one he recommends is around $100.
here is a link to his site for those interested: Torque
Here is a description (from his site linked above) also:
Torque is an engine diagnostics application for Android that allows you to directly monitor your car engine control unit (ECU) and retrieve various information from the sensors connected to it as well as use your phones internal GPS and accelerometer sensors to graph other information such as acceleration
Torque can be used to view any stored fault codes on your vehicles ECU, then, after a mechanic fixing the fault, it also can clear the fault codes allowing you to clear the ‘Check Engine’ light warning on your dashboard
Torque can use a multitude of OBD adapters, ranging from the cheap (and slightly buggy) adapters you can find on ebay, to the more reliable PLX Devices Kiwi Bluetooth and OBDKey which are the amongst the best.
That's pretty damn cool... I'm not a car enthusiast, but even so I kind of want to get one of those BT adapters and try it out
^ yeah, same boat. I have a bad gas cap so my check engine light is CONSTANTLY on. Now I just ignore it because "I KNOW" that's the cause... heaven forbid something else be wrong with my car and I've just ignored it. Would be especially nice since this app also lets you CLEAR THE CODE (no more check engine light).
Really need to find a good/cheap BT adapter that will work with this app!!!
I'm interested in this too. The only thing I wonder about is the Bluetooth connection. There was a thread somewhere about wii remotes not working with some app on the market and the explanation was the Bluetooth version we have (3.0) would require considerable changes to make it work. I don't want to fork out the cash only to find out they are not compatible. I read that thread weeks ago, so I don't remember the particulars. Hopefully, someone will chime in that has already tried it.
Hmm. I've had no issues connecting with a few bluetooth devices... Never really had that concern, hope there are no issues. Wonder if you could return an item for that...
I was going to ask in his forum if anyone has tried it on a Galaxy S of any sort, but I never got the password e-mail. I'll try again later. Here's the thread that is making me balk. Otherwise, I probably wouldn't have given it a second thought.
Bluetooth 3.0 Compatible Controllers for Gaming?
I just got the cheapest BT ODB2 dongle from eBay (<$30), and it works fine on my 2010 Silverado HD. The throttle position sensor didn't seem to work right (my foot does just as well ), but the boost sensor seems like it may have...? I only drove around the block - we'll see when I'm getting on the freeway tomorrow. Being a new truck, there are no SES lights for me to check. Also, my truck has BT for the stereo, and there didn't seem to be any issues being connected to both.
In short, it works just fine for what it seems to be for (simple guages & such).
-bZj
s15274n said:
^ yeah, same boat. I have a bad gas cap so my check engine light is CONSTANTLY on. Now I just ignore it because "I KNOW" that's the cause... heaven forbid something else be wrong with my car and I've just ignored it. Would be especially nice since this app also lets you CLEAR THE CODE (no more check engine light).
Really need to find a good/cheap BT adapter that will work with this app!!!
Click to expand...
Click to collapse
A new $10 gas cap and a $25 AutoZone code reader would probably be cheaper and easier.
The gas caps for my car go bad every few months, it's just a design flaw I think. With all of the additional features the app offers + the cool factor, I think its worth it. May give one of the cheaper cables a try.
down8, got a link for the cable you got man?
Awesome + Finally!
I've been waiting for one of these to come out for some time. I have had a BT adapter in my car, as I used it with my Nokia N810 (using a software called CARMAN). It has some +/-'s, but this new software (Torque) is simply amazing.
Ended up using the free version, but purchased as soon as I got home. Will do some more testing and report soon.
I think it is pretty cool app, even though I can scan the codes for free at an AutoZone, but if you mod your car the app will come handy when you need to setup your CAI to by-pass ECU, etc.
I've been playing around with this app using a $30 Chinese bt dongle from ebay. It works great, you don't need the $100 one unless you plan to use it for pro level diagnostics (which some people do). It's got a ton of cool functions, the least of which is being able to read and reset fault codes. But I use for that too. It may not be able to read all the OBD output from your car, for example, it won't list the turbo boost for my Volvo, but that is vehicle dependent. Check out the forums on the dev's site; lots of good info there. Btw, I'm using the paid version.
Sent from my SGH-T959 using XDA App
^ I think I know which one you are referencing, but I've seen variations. Could you post a link to the one you snagged... I have a saab so perhaps I will have similar success. Thanks for letting me know that.
Wow the developer needs to get on board with CobbTuning for the import enthusiast guys. This tool would be awesome to flash tuned performance maps. My accessport cost me $600+. Pretty awesome. Shame you couldn't just use the sensor to the micro USB.
s15274n said:
^ I think I know which one you are referencing, but I've seen variations. Could you post a link to the one you snagged... I have a saab so perhaps I will have similar success. Thanks for letting me know that.
Click to expand...
Click to collapse
Sorry for the delay. Here's a link to the one I purchased. OBDII Scanner - seller autodoctor007. It shipped pretty fast from China.
wow, this is a great idea. i have not tried it yet, as i dont have an obdII to BT, but this looks awesome.
On a side note, as i dont have the obdII/BT connection yet, I do have an OBDII to USB cable. Can this or another app use that? I guess I would have to get a USB to microUSB adaptor to plug into phone.... how about any computer programs that will use the ODB to USB adaptor to monitor car data/engine lights?
s15274n said:
I was curious if any on here have used this app? I love the developer (have his SpeedHUD app)..... If anyone can does use it, I would love your opinion. I am hesitant to spend much on a bluetooth OBD tool. I think the one he recommends is around $100.
here is a link to his site for those interested: Torque
Here is a description (from his site linked above) also:
Torque is an engine diagnostics application for Android that allows you to directly monitor your car engine control unit (ECU) and retrieve various information from the sensors connected to it as well as use your phones internal GPS and accelerometer sensors to graph other information such as acceleration
Torque can be used to view any stored fault codes on your vehicles ECU, then, after a mechanic fixing the fault, it also can clear the fault codes allowing you to clear the ‘Check Engine’ light warning on your dashboard
Torque can use a multitude of OBD adapters, ranging from the cheap (and slightly buggy) adapters you can find on ebay, to the more reliable PLX Devices Kiwi Bluetooth and OBDKey which are the amongst the best.
Click to expand...
Click to collapse
im having problems with this app...it crashes on start...which version do u have?
my little review http://www.youtube.com/watch?v=-1J8JwRPUXI
Awesome, thanks man!
The cheap chinese OBD II don't work with all vehicles so be wary about buying one of the these. I bought one for $25 on ebay and they don't connect with Ford's interface, however it did connect to my Dodge truck.
Sent from my SGH-T959 using XDA App
Just wanted to touch base to see if there potentially may be any interest in something like this? I have one on the way for review and to see if they even work with our gTab. Rumor was the price point was going to be around $20 - $25.
When I get it tested I will post the findings and see what you guys think!
[EDIT] - so far I can't get it to work. I've tried just throwing it in while it's on as well as having it powered down (like the dock) to allow the DNS to propagate. No dice so far. I'll check with the supplier to see if there is an app to make it work.
it2steve said:
Just wanted to touch base to see if there potentially may be any interest in something like this? I have one on the way for review and to see if they even work with our gTab. Rumor was the price point was going to be around $20 - $25.
When I get it tested I will post the findings and see what you guys think!
Click to expand...
Click to collapse
Interested in outcome but not really looking to buy. WiFi is solid enough and with existing dock if I need LAN (haven't yet) I have it along with the HDMI and other.
Thanks!
When would you use this?
I'm trying to imagine a time it would come in handy. Ideas?
Maybe it uses a kernel module that isn't included in your kernel. I don't know what ROM/kernel you are using (I use stock), but possibly the pl2303 module. If you have a Linux PC handy, you can check for some info. Before plugging it into the Linux box, open a terminal and run this command:
Code:
tail -f /var/log/messages
Then plug it in, and see what it tells you. Use Ctrl + c to end it.
You can also check which modules are loaded with this command, new modules are at the top of the list:
Code:
lsmod
I also am not sure if I would ever use something like that. My ZT-180 came with something similar, but with a miniUSB end, and I have never found the need to even try it.
wasserkapf said:
Maybe it uses a kernel module that isn't included in your kernel. I don't know what ROM/kernel you are using (I use stock), but possibly the pl2303 module. If you have a Linux PC handy, you can check for some info. Before plugging it into the Linux box, open a terminal and run this command:
Code:
tail -f /var/log/messages
Then plug it in, and see what it tells you. Use Ctrl + c to end it.
You can also check which modules are loaded with this command, new modules are at the top of the list:
Code:
lsmod
I also am not sure if I would ever use something like that. My ZT-180 came with something similar, but with a miniUSB end, and I have never found the need to even try it.
Click to expand...
Click to collapse
I have an ubunu VM, I'll give that a try and keep you posted. Thanks!
it2steve said:
I have an ubunu VM, I'll give that a try and keep you posted. Thanks!
Click to expand...
Click to collapse
Where hardware is related, a VM may not give the needed results. That is because a VM may use it's own drivers.
If you have an Ubuntu installation CD, you can boot that as a live CD. It will run only on system memory, so it may be a bit laggy. That will work just like an installed Linux system.
Any progress on this?
I am very interested to find a USB to ethernet adapter for my Gtab. I do a lot of networking with switchs and ISP providers. It would be awesome if this little USB device would work. Any updates?
probably driver related
This looks like one of the adaptors that have been around for the Wii console for a while.
Clemsyn's kernel has a bunch of USB drivers added that are removed (or are back level) in the stock Viewsonic kernel. I suggest that you give it a go.
Pershoot's kernel is a more involved process to select the bits that you want. So I'd start by trying Clemsyn's first.
shieb said:
I'm trying to imagine a time it would come in handy. Ideas?
Click to expand...
Click to collapse
I have a dell laptop that I recently dropped. The wireless stopped working. Thankfully, everything else seems fine. I had to go out and buy a wireless usb adapter.
>>I have a dell laptop that I recently dropped. The wireless stopped working.
Did you pop open the panel on the bottom and check to see if the little wifi riser card didn't just pop out of its slot?
May not apply in your case, but sometimes the Modem/LAN/Wifi is on a little card that plugs into a header on the motherboard. There's usually an access panel on the bottom to get at it - check that it's properly seated and all connectors are secure, etc.
You can also usually swap them out if they die. Check Ebay.
shieb said:
I'm trying to imagine a time it would come in handy. Ideas?
Click to expand...
Click to collapse
I could see this being handy for a road warrier to watch streamed content in a hotel if he or she didn't want to bring the heavier dock along. Often time wifi is sketchy at best in some locations but many hotels were wired with CAT5 to each room and have a cord curled up in the desk. I often break out my CAT5 adapter to string two cords together so my laptop can rest on the bed and I have faster speeds (and frankly a more secure connection with my VPN) while resting against the many pillows. Beats sitting at the desk with the dock propped up.
Let us know how you make out getting this to work.
Anyone get this to work? I just ordered a gtab and it would be great to have a wired ethernet port for configuring many of the network devices I deal with on a daily basis.
sorheim said:
Anyone get this to work? I just ordered a gtab and it would be great to have a wired ethernet port for configuring many of the network devices I deal with on a daily basis.
Click to expand...
Click to collapse
I have not been able ot ge tthe one I have to work. I will contact the supplier to see if there is a particular that the Malata tabs are using
it2steve said:
I have not been able ot ge tthe one I have to work. I will contact the supplier to see if there is a particular that the Malata tabs are using
Click to expand...
Click to collapse
Did you ever try it in Linux, like I suggested?
Not a Linux VM, but a real install of Linux.
it2steve said:
I have not been able ot ge tthe one I have to work. I will contact the supplier to see if there is a particular that the Malata tabs are using
Click to expand...
Click to collapse
Thank you. I would really appreciate it.
You have to edit a file to enable the ethernet.
http://forum.xda-developers.com/showthread.php?t=886853
*Edit* My apologies. This is a fix for the Malata dock w/ethernet. No idea if it works for the adapter or not.
Alternative usb/lan adapter
I found a USB/LAN adapter for android tablets on euogo dot com for $10. Do a search for this item number: TPGA-ULNA
If you do a google search, "usb to lan adapter for android", many other brands / models also appear.
Does anyone think any of them will work with the Gtab?
Considering the rumor that the dock may be discontinued and that an HDMI cable is on the way, a USB/LAN adapter for the Gtab would be easier to carry around than the dock / power adapter combo.
Warning: 1st time poster = NOOB. Pls. be kind.
You may want to check my posts on making Ethernet on the Dock work. If the device works at all, it should be the same process.
http://forum.xda-developers.com/showpost.php?p=14367749&postcount=41
I could use this at work where they won't allow wireless connections.
As network admin, I will definitely love to have opportunity to connect my tablet to LAN network.
Pretty often it happens, that I am installing new WiFi routers, so for initial config, I need to grab my 17" laptop and connect by cable. It would be much more comfortable to just use my tablet ;-)
Wondering if anyone here has been able to use a 3g dongle using otg cable and y-cable? Does ICS have any drivers built in?
Thanks
Bump anyone?
What is an otg cable and y cable?
Otg. Cable is basically micro USB to USB cable and y cable is required in order to provide power to the device you'really using.
I'm pretty good at figuring out bad lingo but I'm not quite sure what you're trying to accomplish. Are you trying to get 3g on your touch pad or power the 3g dongle like a hotspot? I'm assuming the micro USB to USB plugs into the touchpad and part of the USB "Y" cable and the dongle into another part of the "Y" but what does the y cable plug into? Being detailed and descriptive goes a long way to getting answers on the interwebs.
Sent from my SGH-T989 using Tapatalk
Figured the people that would know if it works/how to get it to work would already know what the cables are seeing as its the same equipment required to hookup any USB device, be it a keyboard, USB flash drive or external hdd to the touchpad.
Basically I want to use the 3g dongle to get internet on the TP. To do this would require external power to the dongle as the TP doesn't have a powered USB host. Most likely require drivers as well.
wouldnt tethering to a cell phone that already has a nice data plan be much better than a franken-dongle setup?
haxin said:
wouldnt tethering to a cell phone that already has a nice data plan be much better than a franken-dongle setup?
Click to expand...
Click to collapse
At least in the US, tablet device plans tend to be cheaper than tethering plans and carriers are starting to crack down on such practices. Its a valid request.
Not really sure if its possible on the touchpad, but I know some other devices are capable of it like the Archos G9 series and some Chinese tablets so I would not be surprised if it were.
Jotokun said:
At least in the US, tablet device plans tend to be cheaper than tethering plans and carriers are starting to crack down on such practices. Its a valid request.
Not really sure if its possible on the touchpad, but I know some other devices are capable of it like the Archos G9 series and some Chinese tablets so I would not be surprised if it were.
Click to expand...
Click to collapse
I think most US carriers would be unhappy if you used a 3G USB Modem with a tablet plan since the modem could be used with a laptop too. Pretty sure it would be against ToS to do so.
In any case, if that's the route someone wants to go, then wouldn't some sort of 3G Wifi hotspot still be better than a "franken-dongle"?
gmkelly001 said:
I think most US carriers would be unhappy if you used a 3G USB Modem with a tablet plan since the modem could be used with a laptop too. Pretty sure it would be against ToS to do so.
In any case, if that's the route someone wants to go, then wouldn't some sort of 3G Wifi hotspot still be better than a "franken-dongle"?
Click to expand...
Click to collapse
Good point on both accounts. A mifi type device would probably be the way to go, less cables, more universal usage, etc. Only downsides being that its pricier than a 3G dongle and the battery life would not be as good, but it would be guaranteed to work.
Jotokun said:
Good point on both accounts. A mifi type device would probably be the way to go, less cables, more universal usage, etc. Only downsides being that its pricier than a 3G dongle and the battery life would not be as good, but it would be guaranteed to work.
Click to expand...
Click to collapse
Yeah, i tether via wifi to my android phone all the time, i also use it as an external gps receiver for my touchpad. It just seems much easier, i'm already paying for the data plan why the hell should i pay some ripoff carrier another 30 bucks a month for data on my tablet. This would however be nice to see if an external dongle will work.
all valid points. I currently tether to my phone as required, however work has issued me with a 3g/4g(LTE) usb dongle that i would like to be able to use (in addition to all the other 3g dongles i have lying around).
I've seen the wifi adapters on ebay that you can just plug the usb dongles into, but to avoid shelling out extra $$ i thought i'd see if there was any in-built or easily implemented support for usb dongles.
Having seen the cheap chinese/ebay tablets running GB with usb dongle support i figured surely there must be drivers out there that could be adapted to work with ICS.
ba114 said:
all valid points. I currently tether to my phone as required, however work has issued me with a 3g/4g(LTE) usb dongle that i would like to be able to use (in addition to all the other 3g dongles i have lying around).
I've seen the wifi adapters on ebay that you can just plug the usb dongles into, but to avoid shelling out extra $$ i thought i'd see if there was any in-built or easily implemented support for usb dongles.
Having seen the cheap chinese/ebay tablets running GB with usb dongle support i figured surely there must be drivers out there that could be adapted to work with ICS.
Click to expand...
Click to collapse
Looks like someone did it with a wired dongle for the Touchpad...
http://forum.xda-developers.com/showthread.php?t=1552102
So maybe someone could do the same for a 3G dongle?
And it also looks like there's a way to a 3G dongle working with an Asus Transformer on Honeycomb...
http://forum.xda-developers.com/showthread.php?t=1151097
although it takes quite a few steps and doesn't work on ICS yet.
I also found this...
http://it-depot.net/pages/3G_Setup
But the guide doesn't mention what tablet or version of ICS this should work on. On my Touchpad running CM9 nightlies I don't have a Mobile Networks options. Between the vagueness of the guide and CM9 being an alpha, it's kinda hard to figure out what the issue might be.
I guess your original question was, has someone made this possible for a Touchpad already? And it seems to me that the answer is no, but it eventually might be done. It looks like you're not alone in wanting to get a 3G USB modem to work on an android tablet, if that gives any hope.
Thanks gmkelly.
I'd seen those links before and tried to find that mobile networks option. From what i can tell, it looks like ICS might actually have some drivers built it, but whether they are in CM9 is a different question.
I also kept a close eye on the wired lan adapter thread posted yesterday (?). If a wired adapter can be implemented, maybe it wouldnt be too much effort on getting the wireless 3g implemented...
Forget US carrier restrictions. This feature would be an absolute godsend in a country like Nigeria where a 3G dongle is pretty much the best way to get online in most places.
The only issue I see with this is that a lot of 3G dongles are only Windows / Mac compliant. Meaning that they hate linux or anything that isn't Winbl0wz XP (or 7) or Mac OS X 10.5+. And Android definitely doesn't fall under that category. Just like consoles (which I have seen people try and use the dongles for, too).
However, if you CAN get them to work, you'll be a hero in the tablet community.
3g dongle works with hp touchpad now. Check Josh's PPPWidget forum. I am using a ZTE MF110 with it on CM9 and get better performance than on a win7 machine.
How hard would it be to get something like this to work with the Rezound?
I know with the Galaxy Nexus you can plug a microUSB to USB adapter in and use flash drives and external hard drives if you're using the right kernel.
I'm wanting something like this because it would be nice to plug into the network at work and ping printers and stuff like that with my phone instead of finding a computer and logging in.
http://www.newegg.com/Product/Product.aspx?Item=N82E16812196235
Not in Gingerbread
USB host mode is only supported in Honeycomb or above, so this won't be possible without ICS on this phone.
I'm not sure if anyone has made an ICS kernel that supports USB host mode.
Also, in addition to compatible software, the phone also needs compatible hardware, which the Rezound might not have.
If you don't have wireless access buy an airport express.
wlmeng11 said:
USB host mode is only supported in Honeycomb or above, so this won't be possible without ICS on this phone.
I'm not sure if anyone has made an ICS kernel that supports USB host mode.
Also, in addition to compatible software, the phone also needs compatible hardware, which the Rezound might not have.
Click to expand...
Click to collapse
Thanks for your input
GrayTheWolf said:
If you don't have wireless access buy an airport express.
Click to expand...
Click to collapse
And this would defeat the purpose completely.
circa881 said:
Thanks for your input
Click to expand...
Click to collapse
Apparently Chainfire tested a bunch of devices and listed the Rezound as incompatible.
http://usbhost.chainfire.eu/
He tested both Gingerbread and ICS, and none of them worked.
(Although those are all probably stock or modified Sense kernels, so maybe there's hope for AOSP? )
circa881 said:
And this would defeat the purpose completely.
Click to expand...
Click to collapse
How?
He said USB to Ethernet. Apparently he only has a hard wire connection. So, buy an airport express to make that hardwire wireless.
GrayTheWolf said:
How?
He said USB to Ethernet. Apparently he only has a hard wire connection. So, buy an airport express to make that hardwire wireless.
Click to expand...
Click to collapse
It doesn't totally defeat the purpose, but considerably complicates things. I'd sooner carry a laptop than break out a wireless router, fire it up, make sure it won't interfere with anything on the wired or wireless side (could be tough to do if you have to log in wireless), then ping/ssh/<your-protocol-here> through that device to get to the device I'm looking for.
With a USB dongle, plug it into the phone, into the wall, and do what you need to do.
Yeah the USB thing would be nice.
You are over complicating the router. Most routers are plug and play nowadays so Ethernet into existing network, and power is all you need with wireless freedom.
It would be even more to carry with me and more money than I'm willing to spend. I was just curious to know how hard it would be to plug my phone straight into the network so I can ping printers or telnet into stuff at work
circa881 said:
It would be even more to carry with me and more money than I'm willing to spend. I was just curious to know how hard it would be to plug my phone straight into the network so I can ping printers or telnet into stuff at work
Click to expand...
Click to collapse
Ethernet word be nice, but it doesn't exist. I was just providing an alternative.
I would be careful about plugging things into the work network. Some IT managers are rather...protective of their domains and set up extensive security, to the point where the particular port you plug into may shut down if it recognizes an unauthorized device. I work for the Marine Corps, and aside from the fact it's a punishable offense to connect an unauthorized device to the Navy/Marine Corps Intranet (and attached information systems), the switches will immediately disable a port with an unrecognized device connected.
Hello,
I bought an external keyboard that connects via the mini usb port. It didn't work, but found a suggestion:
When I first connected my adapter that came with my tablet to the keyboard adapter I was very disappointed that nothing happened. I tried several different browser pages, but nothing happened. I read reviews on here and noticed on about that someone mentioned they changed their USB settings and their keyboard finally started working. So, I immediately went to my Settings, Advanced Settings, and then USB BUS MODE and changed it from DEVICE mode to HOST mode and VOILA - the keyboard immediately started functioning
Click to expand...
Click to collapse
I tried to find where to change the usb settings to host but couldn't find the area. Is there anywhere I can find this? I am using the AOPK Rom. Thanks for any help!
OTG not in any of the Nook Tablet yet
OTG is not implemented yet on the stock nor current cm10 roms based on what I have asked in this forum for Nook Tablet. I know you can do this with the new nooks that have monochrome display. May I ask where did you read this article?
bulsatar said:
Hello,
I bought an external keyboard that connects via the mini usb port. It didn't work, but found a suggestion:
I tried to find where to change the usb settings to host but couldn't find the area. Is there anywhere I can find this? I am using the AOPK Rom. Thanks for any help!
Click to expand...
Click to collapse
yep, it was in a review of the product on amazon. here is a link to the product:look at couple reviews down. I am happy to wait just want to make sure that I will be able to use it soon
bulsatar said:
yep, it was in a review of the product on amazon. here is a link to the product:look at couple reviews down. I am happy to wait just want to make sure that I will be able to use it soon
Click to expand...
Click to collapse
Were you reading the review for the Nook Color with working usb otg? It does work for that tablet, not the NT though.
Sent from my AT100 using xda premium
I wasn't looking specifically for how to get it working on the tablet, just looking in general for how to do it in android. Hopefully they implement the otg soon
I just downloaded the new cm10 (snappy and no more reboot/sdcard lost errors!!) but there wasn't anything about the type of usb connection in that one either...
Am I not going to be able to use this keyboard? Will I have to break down and buy a price blue tooth one????
bulsatar said:
I just downloaded the new cm10 (snappy and no more reboot/sdcard lost errors!!) but there wasn't anything about the type of usb connection in that one either...
Am I not going to be able to use this keyboard? Will I have to break down and buy a price blue tooth one????
Click to expand...
Click to collapse
At this time the NT does not have usb otg on any ROM, it may in the future, but if and when is not known at this time. The NT will never have bluetooth, Never. It has been well documented why, do a search and read. So a BT keyboard will never work. Is it really that hard to type with your thumbs?
Sent from my AT100 using xda premium
It isn't really a matter of difficulty, it is a matter of duration. I didn't want a full laptop and I like the android os so wanted to try a tablet with a keyboard for my mobile computing needs. I am do a good amount of typing (chapters for novels and such) and prefer a keyboard. I was using my phone before and it was a lot slower than what I can do with a keyboard and got tiring after an hour or so. It isn't detrimental that I can't use a keyboard, just desired.
bulsatar said:
It isn't really a matter of difficulty, it is a matter of duration. I didn't want a full laptop and I like the android os so wanted to try a tablet with a keyboard for my mobile computing needs. I am do a good amount of typing (chapters for novels and such) and prefer a keyboard. I was using my phone before and it was a lot slower than what I can do with a keyboard and got tiring after an hour or so. It isn't detrimental that I can't use a keyboard, just desired.
Click to expand...
Click to collapse
I bought a Toshiba Thrive 32gb off craigslist for $200. I am now running CM10. I bought it for those exact reasons. It has full sized usb, full sized hdmi, micro usb, full sized sd card expandable to 128 gb, bluetooth capable, gps, 10.1" screen. I use a mouse through usb, bluetooth keyboard, and I hook it up to my TV or
computer monitor and is performs really well as a portable computer with little cost involved.
Sent from my AT100 using xda premium
lol, after spending 150 on the tablet I think that I am going to skip buying another, however I have started looking at other virtual keyboard options and will be trying out a few to see if they can fill the gap until/if they activate the usb otg. Thanks for the info and I will reply if I find a keyboard that I like enough to be useable as a touch typer!!