Hello you guys, this topic is all about Unlock Bootloader - Root - CWM - Official Firmware - Custom Firmware - MOD.
=======Step by Step to Prepare=======
- Download Flash tool v0.9.0.0
http://www.mediafire.com/?h85b5q5j2jzasf7
Click to expand...
Click to collapse
- Fastboot to flash kernel
http://www.mediafire.com/?tqbsf49rfb7btw6
Click to expand...
Click to collapse
- Drivers Pack :
http://www.mediafire.com/?qsew6laqc3pmll8
Click to expand...
Click to collapse
* 3 parts above are already included in Flash tool v0.9.0.0. But i split to 3 parts for easy to understand ! Experience users just only need to download Flashtool only !
=======Step by Step to Implement=======
1. Unlock bootloader
http://forum.xda-developers.com/showthread.php?p=29281222
Click to expand...
Click to collapse
2. Installing CWM and Rooting for 6.0.B.1.564 firmware
+ Download kernel file : http://www.mediafire.com/?012lj242kdqqbr2
+ Extract fastboot folder you downloaded before, Hold Shift + right click on fastboot folder, select "Open command window here".
+ Copy "kernel.elf" file into fastboot folder.
+ Turn off your phone, hold Volume Up and connect the USB cable to the computer. If the LED light turn blue that means the phone is now on Fastboot mode.
+ Type this command :
fastboot flash boot kernel.elf
Click to expand...
Click to collapse
+ Finish, turn on your phone and press volume down or up sometimes to enter CWM and your phone is already root!
3. Official Firmwares flash by Flashtool :
+ LT22_6.0.B.1.564_Customized_NCB
http://www.mediafire.com/?4e434hxzpz31i
Click to expand...
Click to collapse
+ Use Flashtool to flash firmware.
4. MODs for 6.0.B.1.564 firmware flash by CWM or install directly if it have apk extension:
+ SDCARD Mounter as Mass Storage (MSC Mode) for Xperia P
http://www.mediafire.com/?szj7gm0f6dbobib
Click to expand...
Click to collapse
+ 14 Status toggles mod + % circle battery
http://www.mediafire.com/?8gybqd2j93m6wt4
Click to expand...
Click to collapse
No one test and reply ??
Status bar forced close when swiping the notification. Might be mod or rom. Using KA03
Sent from my Xperia P using my fingers.
Would you let me know the ROMs for Xperia P, please???
I just hardly find ROMs for it
Many Thanks!!!
so many apps go force closes after rooting... !
like juice defender, my backup etc...
what is the reason?
The links are disable... Can someone upload again ??
Sent from my LT22i using xda app-developers app
Hey, even after rooting, I can't go to the cwm!!!...?
Please, if anyone can help...
It always starts normally...
Even in titanium, reboot in recovery not working...
All Xperia P users...
waiting for you here...
https://www.facebook.com/groups/365354730207574/
JOIN US
please update the driver pack
Guys, is there ANY other way to unlock the bootloader instead of the official Sony instructions? Because those don't work for me, it says bootloader unlockable: NO, and i can't continue the process.
Anyone know how to bypass it?
Did you checked if your sony is unlockable?
If yes, you can use flashtool
im having trouble unlocking the bootloader...i think im missing the drivers for my phone (xperia P) could someone send me the link for the drivers, have been searching on google for 2 hours now without any luck
aneell said:
im having trouble unlocking the bootloader...i think im missing the drivers for my phone (xperia P) could someone send me the link for the drivers, have been searching on google for 2 hours now without any luck
Click to expand...
Click to collapse
Xperia P windows dirvers along with ones for fastboot and flashtool are included in the Flashtool instalation package (try 0.9.10.1 version or higher). After installing flashtool, go to the flashtool/driver directory, run flashtool-drivers.exe and when prompted, check Xperia P, Xperia U, and Xperia sola drivers, Fastboot drivers and Flashtool drivers (last two are all the way down in the list)
Dwnload links are dead update it asap
Sent from my LT22i using xda premium
Dear sir
pls advice for which Version Use of CWM Unlcok Bootloder & give procedure of CWM for my sony xperia P Mobile. (4.1.2) (Build : 6.2.A.1.100 ) (rooted ) ( boot unlocked )
priteshc said:
Dear sir
pls advice for which Version Use of CWM Unlcok Bootloder & give procedure of CWM for my sony xperia P Mobile. (4.1.2) (Build : 6.2.A.1.100 ) (rooted ) ( boot unlocked )
Click to expand...
Click to collapse
Dude, what do you need exactly?
Related
Hi all ,
i might be getting my mini next week or so ~! and i am damn excited ( i killed my w8 and ace is too expensive )
but i would love to have a custom rom for my mini
- i did some research and this is what i found
-i wanted hybrom and in order to use it i need an unlocked bootloader
-so i went to http://wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Mini_Pro:_Full_Update_Guide to see how it's done
-i somewhat understand it but....
here are my doubts
-how do you get ''fastboot'' and ''android SDK''?
-does it work for pro only ? how about just mini?
-when it says open ''terminal '' (on 5) what does it mean terminal ? i search my computer and there is no such thing as terminal ...
-oh and does unlock BL need a rooted phone? (should i root before unlock or unlock 1st?
-in order to use hybrom must i use a custom kernel ?
so can anyone help me?
You can see this link to download fastboot and android SDK (Use on unlocking bootloader)
I used that on unlocking the bootloader of my xperia mini ST15i and i believed that it can be use on any xperia 2011 devices.
I rooted my phone first before I unlock the bootloader.(I dont know if it can be the other way around)
To flash the Hybrom ROM, you need a custom Kernel.
Hope this help.
wait...thats for arc...is the steps the same?
Yeah.You will notice its for Xperia Arc but can be use on 2011 Xperia Devices.
Just follow the steps.
oh...so the diffrence is only the files that need to be donwload / execiuted / extracted?
Nope.You download and use the file in that link i gave to you.
huh?? u used Unlock Xperia Arc Bootloaders.zip file?
Yes.Like I said earlier it can be use on any xperia 2011 device.If your in a big doubt you can search around the forum.
wow ok! i will try it when i get my mini so .. in short
1.root my mini
2.unlock bootloader using the guide 100% follow it
3.flash a custom kernel eg rage kernel using cwm
4.using cwm flash hybrom v11
am i right
tohno said:
wow ok! i will try it when i get my mini so .. in short
1.root my mini
2.unlock bootloader using the guide 100% follow it
3.flash a custom kernel eg rage kernel using cwm
4.using cwm flash hybrom v11
am i right
Click to expand...
Click to collapse
Yeah Right!
okay thanks neon ! will report if i succeeed
tohno said:
wow ok! i will try it when i get my mini so .. in short
1.root my mini
2.unlock bootloader using the guide 100% follow it
3.flash a custom kernel eg rage kernel using cwm
4.using cwm flash hybrom v11
am i right
Click to expand...
Click to collapse
thats was not easy to root, it depend on your phone FW to root, if on .58 and below, u can use Easy Rooting Toolkit..
but if on .62 u should follow :
this method for no require unlocking bootloader,
http://forum.xda-developers.com/show....php?t=1455216
and this method require unlocking bootloader,
http://forum.xda-developers.com/show....php?t=1440161
what is FW ? and what is .58 .62? wait ...you mean the arc method cant be used ? and the links are dead
i was thinking of using flashtool to root my mini ..i think flashtool supports mini
tohno said:
what is FW ? and what is .58 .62? wait ...you mean the arc method cant be used ? and the links are dead
Click to expand...
Click to collapse
FW is Firmware.. it is Permanent software programmed into your phone.. .58 and .62 is the FW version.. different FW version is difference method used to root..
---------- Post added at 09:38 AM ---------- Previous post was at 09:36 AM ----------
tohno said:
i was thinking of using flashtool to root my mini ..i think flashtool supports mini
Click to expand...
Click to collapse
yes, but on .62 version u cant root using flashtool.
dont root it, just unlock bootloader, flash kernel and then ROM
unlock using SE website, obtain key and download this file- http://www.mediafire.com/?0m6xovf60yx9xn3
extract this rar file, go to 'fastboot' folder, press 'shift' key and right click on background of folder,
select - 'open command window here' , connect phone holding vol+ and enter the commands written on SE bootloader unlock page
wow i read some comments on the mini ..the comments are quite bad ...they say keep force close , screen sucks etc ...at least in the malysian community ..a litle doubtful
metalrawk said:
dont root it, just unlock bootloader, flash kernel and then ROM
unlock using SE website, obtain key and download this file- http://www.mediafire.com/?0m6xovf60yx9xn3
extract this rar file, go to 'fastboot' folder, press 'shift' key and right click on background of folder,
select - 'open command window here' , connect phone holding vol+ and enter the commands written on SE bootloader unlock page
Click to expand...
Click to collapse
but without root i cant use apps like tita backup etc ..and when you flash kernel does it come with auto root / cwm? how do you enter cwm with mini?
and i heard there are some overheat issues with the phone .. is this a serious issue ? is there a solution?
metalrawk said:
dont root it, just unlock bootloader, flash kernel and then ROM
unlock using SE website, obtain key and download this file- http://www.mediafire.com/?0m6xovf60yx9xn3
extract this rar file, go to 'fastboot' folder, press 'shift' key and right click on background of folder,
select - 'open command window here' , connect phone holding vol+ and enter the commands written on SE bootloader unlock page
Click to expand...
Click to collapse
is this method without losing warranty?
This procedure works on 4.0.3 on Arc S, Neo V and Ray. It also works on Unlocked and Locked Bootloader.
Requirements:
1.install adb driver (or reinstall it from adb sdk)
2. needs USB Debugging on
(optional) activate Mass Storage Mode (MSC), some users reported trouble using MTP mode
3. connect the usb cable to the phone ->run .bat file from zip
4.press any key
5.the phone will turn off, wait to switch on again (see the lockscreen)
6.press any key again
7.the phone will reboot again(same as 6th step)
8.press any key ...again
9. same as 6th step
10.press any key, the bat closes...and there you are...working superuser, need to install busybox from market
i've found the root file on arc development section, i don't remember in wich one
also, CWM from here http://forum.xda-developers.com/showthread.php?t=1346190 is compatible
Hit Thanks button if it works for you
Works perfectly thanks!
how to install ics offical with locked bootloader please
Why can't I open the attached file ? .. It says that something is wrong with it.
Works like a charm on Neo V ICS .562 Off.
Cannot open the Zip..
fernoct said:
Cannot open the Zip..
Click to expand...
Click to collapse
I have the same problem... Some help please?
how to change to MSC mode in ICS? cannot find the option ... Also, uploaded the zip file again.
ROOT_v5.0.rar
Here I've translated it in English and uploaded it here.
CLICK.
Found the way to change to MSC:
with phone disconnected from USB... go to Settings - xperia - connectivity - usb connection mode - change to MSC. Accept. Done.
GiBraiNe said:
how to change to MSC mode in ICS? cannot find the option ... Also, uploaded the zip file again.
Click to expand...
Click to collapse
is not necessary set MCS mode, only USB debug mode.
Works perfectly, great!
Yeah! Now it works, thanks guys
izimen said:
how to install ics offical with locked bootloader please
Click to expand...
Click to collapse
install nordic firmware with wotan then connect to pc companion and update to 4.0 dont matter if your boot loaders locked
Perfect work..........
Works greatThanks!!!
Enviado desde mi ST18i usando Tapatalk 2
it works perfect!
hy, anyone can tell me how uninstall my CWM recovery to do the upgrade..? thanks (ihave locked bootloader)
brunsman6229 said:
hy, anyone can tell me how uninstall my CWM recovery to do the upgrade..? thanks (ihave locked bootloader)
Click to expand...
Click to collapse
you don 't need to uninstall CWM to upgrade to ICS 4.0.3, i just flashed the ftf file, and i was coming directly from baseband .42. to be sure, you can install Generic Nordic firmware with Wotan(baseband .62) and then update to 4.0.3 via PC Companion.
ok thanks but when you flash with wotan it will perform a "hard-reset" ..? i have a doubt with CWM
This tutorial will guide you through all the steps required to install CyanogenMod 9.0, which is based over Ice Cream Sandwich 4.0.3/4.0.4 on your Xperia 2011 device.Please see that your device needs to be Bootloader unlocked for this to work.
P.S. - Please note that these instructions are only meant for reference purpose. In case you are coming from another ROM and already have a custom Recovery on your phone, then it’s mandatory to Wipe all data before flashing this ROM.
I will not be responsible if you brick your device by following the procedure given below. Proceed with caution!
Supported Devices
The devices which will be covered in this tutorial are -:
Xperia Active – satsuma
Xperia Arc – anzu
Xperia Live – coconut
Xperia Mini – smultron
Xperia Mini Pro – mango
Xperia Neo – hallon
Xperia Neo V – haida
Xperia Play – zeus
Xperia Pro – iyokan
Xperia Ray – urushi
Xperia X10 – es209ra
Required Downloads
1. Latest Google Apps for CM 9.0 – link : http://uploading.com/files/c1316599/gapps-ics-20120224-signed.zip/
2. CM 9.0 package for the appropriate device (please refer to the device codenames above) – link : http://get.cm/
3. Flashtool – Windows version / Linux version link : http://androxyde.github.com/Flashtool/
4. Fastboot package – link : http://www.multiupload.nl/BMJ24IL6XY
5. x86/x64 drivers – link : http://www.multiupload.nl/0XZV1LXRVA
5. (Optional) Faceunlock addon – link : http://uploaded.to/410/b8n32tuj
Tutorial
1. First of all, extract all the files and keep them in a place where you can navigate to safely.
2. Put the CM9 update to the root of your SD card.
3. Install the drivers which you have downloaded above.
4. Extract the Fastboot package and the CM9 update package that you downloaded for your device.
5. Copy the boot.img file present in the CM9 folder to the Fastboot folder.
6. Open up a Command Prompt and type CD followed by the location of your fastboot folder.
7. Now connect your phone in Fastboot Mode. To do this, while making sure that you your phone is off, connect your phone to the computer while holding down these buttons ->
Menu button (for Xperia™ arc, Xperia™ arc S, Xperia™ neo, Xperia™ neo V, Xperia™ pro).
Search button (for Xperia™ PLAY).
Volume up button (for Xperia™ mini, Xperia™ mini pro, Xperia™ ray, Xperia™ active, Live with Walkman™, Xperia™ S).
If phone is connected correctly in Fastboot Mode, a blue led light should glow up.
8. To check if your phone is connected correctly in Fastboot mode, type “fastboot devices” without the “” and if you get a serial number, that means it is connected correctly.
9. Type “fastboot flash boot boot.img”. this step is required to flash the FreeXperia kernel.
10. Now disconnect the USB cable and switch on your phone. While the phone is booting on and you see the FXP logo, keep tapping the volume down key until you enter recovery.
11. Once entered recovery, Format your /system partition, /data partition, /cache and dalvik-cache. Now choose the option which says Apple zip from sd card and select the CM9 update package.
Now reboot your phone and your phone should have updated to CyanogenMod 9.0 which runs over Ice Cream Sandwich!
flash this kernel : http://www.mediafire.com/?ojiaqv9jn47rgzm
Tutorial for neo l(credit goes to saignor)
ROM
http://d-h.st/VIr
Kernel
http://d-h.st/LkS
Gapps
http://goo.im/gapps/gapps-ics-20120429-signed.zip
If you done the download lets started
1.Copy Zip to SD card (phoenix_signed_cm9_b00tbu9.zip and gapps-ics-20120429-signed.zip)
2.Install Kernel
Download fastboot.rar (http://www17.zippyshare.com/v/58177194/file.html)
Extract it and you'll get fastboot folder ! Now copy the kernel to that folder (cm9_phoenix_v1.3.img)
Open fastboot folder and hold shift and click right click and select start new command windows
Now connect your phone in fastboot mode by power off and holding search button while connect to computer
In fastboot command type fastboot flash boot cm9_phoenix_v1.3.img
Wait till finish ! Disconnect from computer
3.Enter recovery mode ( CWM)
Do a full wipe ,Factory reset,Dalvic cache
4. Install Zip (First install phoenix_signed_cm9_b00tbu9.zip and restart and then you will get into new os )
NOw reboot back to recovery by holding the power button and select restart and select reboot-recovery
Install gapps-ics-20120429-signed.zip
5. Reboot
umm, was this needed?
Aarush said:
umm, was this needed?
Click to expand...
Click to collapse
i think yes because he is begging for thanks bro
mate at least go some research before making tutorials. CM9 recommends baseband .72 they even uploaded small .ftf file on FXP's server for easy download.
altho, .64 baseband will work. i am not specialist to know whats different between .72 and .64
Gjole86 said:
mate at least go some research before making tutorials. CM9 recommends baseband .72 they even uploaded small .ftf file on FXP's server for easy download.
altho, .64 baseband will work. i am not specialist to know whats different between .72 and .64
Click to expand...
Click to collapse
yup you are right baseband 72 is better....
i agree to geekynoob or whatever his name is ...
1.This thread is useless ... this should be in General Thread .. not in development section
2. If you think you are doing this for NOOBS then you are a big noob!
3. Writing Tutorial is different thing this is just a walkthrough
and If you think these aren't valid reason you are a noob or an alien
9. Type “fastboot flash boot boot.img”. this step is required to flash the FreeXperia kernel.
10. Now disconnect the USB cable and switch on your phone. While the phone is booting on and you see the FXP logo, keep tapping the volume down key until you enter recovery.
Click to expand...
Click to collapse
When I do step 9, my phone doesn't boot. It just stays black and does nothing. I'm on Xperia Neo stock 4.0.4 rooted and unlocked.
BluesRebel said:
When I do step 9, my phone doesn't boot. It just stays black and does nothing. I'm on Xperia Neo stock 4.0.4 rooted and unlocked.
Click to expand...
Click to collapse
Restart your PC and reconnect your mobile again on "flash mode" !!!
Make Sure that Android Drivers for ur mobile are installed on ur computer
Or Uninstall Flashtool & Reinstall latest Version of flashtool on ur PC:laugh:
karthicvkn said:
Restart your PC and reconnect your mobile again on "flash mode" !!!
Click to expand...
Click to collapse
Fastboot is with menu-button and flash mode is with the phone on and als debugging on right? Or am I talking nonsense now?
But I tried that already. I flashed the kernel also with flashtool in flash mode. Had the same problem. Phone didn't boot.
SunwalkerSakthi said:
Make Sure that Android Drivers for ur mobile are installed on ur computer
Or Uninstall Flashtool & Reinstall latest Version of flashtool on ur PC:laugh:
Click to expand...
Click to collapse
Done. I have the newest. Still the same problem.
BluesRebel said:
Fastboot is with menu-button and flash mode is with the phone on and als debugging on right? Or am I talking nonsense now?
But I tried that already. I flashed the kernel also with flashtool in flash mode. Had the same problem. Phone didn't boot.
Done. I have the newest. Still the same problem.
Click to expand...
Click to collapse
Phone not boot mean, You can't see the sony logo ???, If its that try to download kernel again.. !!!
Also make sure latest adb drivers are installed !!!
BluesRebel said:
Fastboot is with menu-button and flash mode is with the phone on and als debugging on right? Or am I talking nonsense now?
But I tried that already. I flashed the kernel also with flashtool in flash mode. Had the same problem. Phone didn't boot.
Done. I have the newest. Still the same problem.
Click to expand...
Click to collapse
Which kernel r u flashed Stock CM 9 kernel r Night-Elf Cm 9 Kernel
karthicvkn said:
Phone not boot mean, You can't see the sony logo ???, If its that try to download kernel again.. !!!
Also make sure latest adb drivers are installed !!!
Click to expand...
Click to collapse
No, it just stays black. I only notice a slight vibration when turning on but nothing comes up. Holding the volume button for CWM doesn't work also. Tried the kernel multiple times.
SunwalkerSakthi said:
Which kernel r u flashed Stock CM 9 kernel r Night-Elf Cm 9 Kernel
Click to expand...
Click to collapse
The one in the official CM 9.0 RC1 .zip. I don't know which one it is, it just says boot.img. Stock CM 9 kernel i'd say.
Finally! I have CM 9. I flashed this one: http://forum.xda-developers.com/showthread.php?t=1566871 (full 127)
Guys I gonna change my ExMiui4 to FXP 132 CM9,would this be worthy?
Dragons never exist,so never Die!!!
TheRisingDragon said:
Guys I gonna change my ExMiui4 to FXP 132 CM9,would this be worthy?
Dragons never exist,so never Die!!!
Click to expand...
Click to collapse
very worthy..I ve tried a number of roms(miui too) and cm9 seems to be the best.. aokp too.. so go ahead..
i've a issue. when i install cm9 or cm10 touchscreen doesn't work!!! why? i tried everything..
santalfredos said:
i've a issue. when i install cm9 or cm10 touchscreen doesn't work!!! why? i tried everything..
Click to expand...
Click to collapse
Weird.. What kernel did u use? Try flashing the Rom again..
Sent from my Neo V
Ok new to the forum, new to xperia play.
My old phone = LG p500 2.2.1
Please let me know what all of this means.. it is foreign to me..
Should i update?
what is rooting?
is cyanogen better than 4.0 ice cream sandwich?
which should i put on there..
So confusd..
please please help / thank you in advance
Mr_Rabo said:
Ok new to the forum, new to xperia play.
My old phone = LG p500 2.2.1
Please let me know what all of this means.. it is foreign to me..
Should i update?
what is rooting?
is cyanogen better than 4.0 ice cream sandwich?
which should i put on there..
So confusd..
please please help / thank you in advance
Click to expand...
Click to collapse
Sit down, take a deep breath, open google.com and ask it questions. You will be amazed what you can learn there. Some links will even bring you here, where all these have been explained, some time ago.
Having problems on the hassle of downgrading and upgrading just to root your phone that has a locked bootloader?
Here it is the solution for rooting without dowgrading
Requirement:
1. Flashtool - http://androxyde.github.com/index.html?1349526467000
2. ST15i Latest ICS Firmware: (You can use your own FTF file of 4.1.B.0.587 of ST15i, the one below is PH Firmware)
ST15i 4.1.B.0.587 PH Firmware
3. ST15i Kernel for the latest Firmware:
http://www.mediafire.com/download.php?r11d989a42y1ozc
4. ST18i Rootable Kernel:
http://www.mediafire.com/download.php?16uxddet7r0x8i0
5. SUS or PC Companion for Flash drivers
6. Rooting toolkit:
http://www.4shared.com/zip/mzM0gROA/DooMLoRD_v1_Xperia-2011-ICS-RO.html?refurl=d1url
Instruction:
1. Install flashtool
2. Extract the 3 zip files containing the latest PH firmware for ST15i on C:\Flashtool\Firmwares\
3. Copy ST18i kernel at ST15i kernel on C:\Flashtool\Firmwares
4. Flash the firmware using flashtool
5. Go through the initial setup process and turn on Debugging mode and Installation from Unknown resources. This is important.
Go to settings > Security > Mark "Unknown sources"
Settings > Developer options > Mark USB debugging
Settings > Xperia > connectivity > USB connection mode > select MSC mode
Click to expand...
Click to collapse
6. Now turn off the phone and this time flash ST18i kernel. Yes ST18i and not ST15i.
7. Now turn on the phone and wait for about 1-2minutes. Yes it will stay on black screen. That's normal.
8. Now connect your phone on PC. Turn off your antivirus temporarily and extract the rooting toolkit and run "runme.bat"(The phone is still black screen and that's normal )
9. Follow the onscreen instruction Allow the phone to reboot and when it is done, wait for 1 minute to be sure.
10. Disconnect the phone and remove the battery and reinsert it again.
11. Run flashtool and this tim flash the ST15i firmware.
12. Turn on the phone and enjoy your rooted ST15i.
Credits to this thread
http://talk.sonymobile.com/thread/41119?start=0&tstart=0
stuck
amnher said:
7. Now turn on the phone and wait for about 1-2minutes. Yes it will stay on black screen. That's normal.
Click to expand...
Click to collapse
I got stuck in this step for more than 10 minutes. is there any alternative kernel for my xperia active?
darvishzadeh said:
I got stuck in this step for more than 10 minutes. is there any alternative kernel for my xperia active?
Click to expand...
Click to collapse
in development you have a lot of kernels..
help plz
Ph firmware links do not work. Plz quick update. One more question : is not there any process to install android 4.2 on my st15i running ics? Thanks in advance.
Rocksubhra said:
Ph firmware links do not work. Plz quick update. One more question : is not there any process to install android 4.2 on my st15i running ics? Thanks in advance.
Click to expand...
Click to collapse
Yes there is a way, but you would have to unlock your bootloader and flash a custom kernel. After that install it in cwm
For the firmware links maybe this could help you :good:
thank you dear developer, who has replied me
:good:
Rocksubhra said:
Ph firmware links do not work. Plz quick update. One more question : is not there any process to install android 4.2 on my st15i running ics? Thanks in advance.
Click to expand...
Click to collapse
Dear, I am new here. I hv updated my device's android version using sony pc companion. I am upgraded to 4.0.4.
But I have no idea on how to root. I am unable to install many apps as I do not hv root access. I want my device to be jellybean 4.2
I would be highly obliged if you kindly impart me on how to do this.
4.1.0.587 this is my build number. Thanks in advance.
Rocksubhra said:
:good:
Dear, I am new here. I hv updated my device's android version using sony pc companion. I am upgraded to 4.0.4.
But I have no idea on how to root. I am unable to install many apps as I do not hv root access. I want my device to be jellybean 4.2
I would be highly obliged if you kindly impart me on how to do this.
4.1.0.587 this is my build number. Thanks in advance.
Click to expand...
Click to collapse
You will loose all data on phone!
Okay here you go:
1. Unlock your bootloader. How yo do this is in my guide, but remember it will void your warranty
2. Install Flashtool and all the drivers from the flashtool installation folder for all devices and modes.
3. Download FXP cm10 (Android 4.1.2 - mostly working) or cm10.1 Alpha (4.2.1 - many things not working, for more details see the thread by shufuking) and copy the rom zip to the sdcard of your phone.
Download the Google apps (gapps) for jelly bean 4.1 or 4.2 (depending on which rom you choose) and copy it to sdcard too.
4. Extract the zip on your PC, copy the boot.img to a folder named "kernels" (that you have to create in the Flashtool folder).
Launch Flashtool, click on the flash -> fastboot mode.
5. Click "reboot into fastboot mode" or shut down the phone, wait 10 seconds, hold volume up and while holding volume up connect the usb to pc. Now the blue led lights up
6. "Select kernel to flash" and select the boot.img in kernels folder.
7. Wait until the image is flashed, now unplug you phone.
8. Power on phone and while it's powering on press volume down again and again to get in clockworkmod recovery (cwm)
9. Select wipe data/factory reset (you navigate with the volume keys and select with the home button) and wipe cache.
10. Go to advanced -> wipe dalvik cache
11. Install zip from sdcard -> choose zip -> choose the rom zip and install it
12. Install zip from sdcard -> choose the gapps
13. Now reboot the phone and enjoy
That's it, for any other questions just ask :good:
Thanks Worked Perfectly
+1 boy Thanks For The Thread
Rocksubhra said:
Ph firmware links do not work. Plz quick update. One more question : is not there any process to install android 4.2 on my st15i running ics? Thanks in advance.
Click to expand...
Click to collapse
No updated links?
Hi
When should i first connect phone to pc??? between 5th and 6th step, or on 8th step?? and should i connect it again on 11th step??
Re: [GUIDE]Rooting 4.1.B.0.587 ICS ST15i without downgrade for Stock kernel
FGoldbug said:
When should i first connect phone to pc??? between 5th and 6th step, or on 8th step?? and should i connect it again on 11th step??
Click to expand...
Click to collapse
Connect it at 4, and on 6 and 8
Sent from my Nexus 7 running Android 4.2.1
Links arent working anymore...
N.
You can use this link....
Re: [GUIDE]Rooting 4.1.B.0.587 ICS ST15i without downgrade for Stock kernel
Is this an official generic fw?
when nothing goes right...
go left.
Re: [GUIDE]Rooting 4.1.B.0.587 ICS ST15i without downgrade for Stock kernel
Yep...
Sent from my SK17i using Tapatalk 2
I will be updating links. Sorry for the trouble.
Links are now updated
Please report if there are still problems
step 11 ???
Instruction:
step 11. Run flashtool and this tim flash the ST15i firmware.
Maby flash KERNEL ST15i, or not ??
I did it and root works fine.
Big THX
Why everybody is copying already existing things , to all follow the link it is working 100% secure , try it
http://talk.sonymobile.com/thread/41119?tstart=0
pator5 said:
Why everybody is copying already existing things , to all follow the link it is working 100% secure , try it
http://talk.sonymobile.com/thread/41119?tstart=0
Click to expand...
Click to collapse
It's not "COPYING", it's "SHARING" :sly::what:
Regards,
AJ
Ok...this is my problem...I have installed eXperience v2 and everything goes fine the first time...then I reinstalled it for change some features in aroma (enable NFC...) but something goes terribly wrong and the installation freeze...I thought to reset and repeat the installation via CWM...but now I can't start the CWM and the phone doesn't boot...instead is looping on the SONY logo...how can I do?flash the ics stock ftf via flashtool is a possible solution?please...help me...
freakTux said:
Ok...this is my problem...I have installed eXperience v2 and everything goes fine the first time...then I reinstalled it for change some features in aroma (enable NFC...) but something goes terribly wrong and the installation freeze...I thought to reset and repeat the installation via CWM...but now I can't start the CWM and the phone doesn't boot...instead is looping on the SONY logo...how can I do?flash the ics stock ftf via flashtool is a possible solution?please...help me...
Click to expand...
Click to collapse
Do you know how to flash stock ics using FLASHTOOL? Connect your phone in flash mode by holding down power down button before plug it into the computer
Sent from my Galaxy Nexus using xda app-developers app
Sherwinnn said:
Do you know how to flash stock ics using FLASHTOOL? Connect your phone in flash mode by holding down power down button before plug it into the computer
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Down button??Are you sure??I remember up button...by the way, so this method works??It's tested??can I use the ftf found somewhere on this forum??I'm italian, so I need the WORLD version of the rom?please, help me...I'm in panicccccc!!!!:silly:
freakTux said:
Down button??Are you sure??I remember up button...by the way, so this method works??It's tested??can I use the ftf found somewhere on this forum??I'm italian, so I need the WORLD version of the rom?please, help me...I'm in panicccccc!!!!:silly:
Click to expand...
Click to collapse
LOL!! up button is fastboot!!! Fastboot is used to flash boot.img not ftf.... Flashmode is vol down!!! And try to find italian version of ftf... if does not have, download the WORLD ftf version!!!
Sherwinnn said:
LOL!! up button is fastboot!!! Fastboot is used to flash boot.img not ftf.... Flashmode is vol down!!! And try to find italian version of ftf... if does not have, download the WORLD ftf version!!!
Click to expand...
Click to collapse
ahahaha...what a donkey noob I am...XDXD...but now I'm not so sure to know what to do...so confused...can you explain me in detail or link me some resource that can help me?
Another detail...I have Locked Bootloader...it is a problem?
freakTux said:
ahahaha...what a donkey noob I am...XDXD...but now I'm not so sure to know what to do...so confused...can you explain me in detail or link me some resource that can help me?
Click to expand...
Click to collapse
1) Download any .10ftf or .54ftf for your country version.. If no then download the WORLD version...
2) Copy and place the ftf in My Computers > Local Disc c:/ > Flashtool folder > firmwares
3) Open Flashtool
4) Press the THUNDER button
5) Select Flashmode and click ok
6) Click on the ftf file that you have just downloaded and click OK
7) Wait for the Flashtool to prepare files for flashing
8) After a picture came out, POWER OFF YOUR PHONE AND HOLD VOLUME DOWN BUTTON AND PLUG INTO YOUR COMPUTER
9) The flashing process shall start and wait for it to finish
*Be sure to install your drivers first in the Flashtool folder..
Sherwinnn said:
LOL!! up button is fastboot!!! Fastboot is used to flash boot.img not ftf.... Flashmode is vol down!!! And try to find italian version of ftf... if does not have, download the WORLD ftf version!!!
Click to expand...
Click to collapse
Sherwinnn said:
1) Download any .10ftf or .54ftf for your country version.. If no then download the WORLD version...
2) Copy and place the ftf in My Computers > Local Disc c:/ > Flashtool folder > firmwares
3) Open Flashtool
4) Press the THUNDER button
5) Select Flashmode and click ok
6) Click on the ftf file that you have just downloaded and click OK
7) Wait for the Flashtool to prepare files for flashing
8) After a picture came out, POWER OFF YOUR PHONE AND HOLD VOLUME DOWN BUTTON AND PLUG INTO YOUR COMPUTER
9) The flashing process shall start and wait for it to finish
*Be sure to install your drivers first in the Flashtool folder..
Click to expand...
Click to collapse
I used flashtool just for root my phone (root for .54), so I used it just for flash the kernels...XD...this means that I have the drivers installed, right?
And at last...Can I use this method even if my BL is locked?
freakTux said:
I used flashtool just for root my phone (root for .54), so I used it just for flash the kernels...XD...this means that I have the drivers installed, right?
And at last...Can I use this method even if my BL is locked?
Click to expand...
Click to collapse
YES!!! good luck flashing!!!
Sherwinnn said:
YES!!! good luck flashing!!!
Click to expand...
Click to collapse
Thanks man...helped me a lot...
freakTux said:
Thanks man...helped me a lot...
Click to expand...
Click to collapse
You're welcome!!!
How's your phone?
Sent from my Galaxy Nexus using xda app-developers app
R: [Q] sola and eXperience v2 problem - bootloop
All resolved...now the phone works properly...
Sent from my MT27i using xda app-developers app