Hi xda community,
I had just broken my screen and started finding for a replacement. And i have found two nice items at EBAY:
First one
Second one
First one doest have FRAME. So, the question actualy is: what is the best choice? As i undestand, you should have difficult work with only screen replacement (first link). Item from second link have only frame, so i should transplantate other parts from my current screen module, which (parts) can be very small and difficult to install.
I need you suggestion about what variant is better for reparing phone yourself.
Thank in advance
For the same price, I would definitely use the one that has a frame.
As far as I know, it is possible to replace the screen only. but because the screen is taped to the frame, you would need to break (as in litterally break) the screen and take out the shreds and then try to replace it with the new one. there should be guides on google/youtube/xda. should not be to difficult, however, I would first do some research on what you could do wrong/mess up before deciding what to do.
I replaced mine with one that included a frame. it is quite easy to replace, and almost idiot-proof. This thread will help you. Just do not scratch around on the board with the screwdriver and do try not to touch any metal components with your fingers. You need about 20 min of time and a screwdriver that goes with the screws under the batery cover.
also look at this
hope it helps
Coirpre said:
For the same price, I would definitely use the one that has a frame.
As far as I know, it is possible to replace the screen only. but because the screen is taped to the frame, you would need to break (as in litterally break) the screen and take out the shreds and then try to replace it with the new one. there should be guides on google/youtube/xda. should not be to difficult, however, I would first do some research on what you could do wrong/mess up before deciding what to do.
I replaced mine with one that included a frame. it is quite easy to replace, and almost idiot-proof. This thread will help you. Just do not scratch around on the board with the screwdriver and do try not to touch any metal components with your fingers. You need about 20 min of time and a screwdriver that goes with the screws under the batery cover.
also look at this
hope it helps
Click to expand...
Click to collapse
thank for you answer, but if you watch my second link better you can see that with frame variant doesn't have any sensors,wires,boards-it's not a full module as on xda thread which you provided.so i need replace them from my phone, what is difficult.
yes, I did not see that. it has the cables for the screen and the touch buttons, though. and it is not dificult to move the small parts. I had to move the sensors, front camera and the lower board (where the usb and one antenna fixture is) from the old to the new screen. they are held in place by double-sided sticky tape. if you are careful you can just pull at the cables gently and push them out with a toothpick or something like that.
in the end it is a question of preferences, if you rather change the front side or the backside of the frame... but I still think moving the things in the back is easier...
Hi everyone,
I have some question about screen replacement myself.
My dad just dropped his note 2 and damaged the screen (really unfortunate, it was really a little drop!), so I was looking into buying a screen from eBay and replace it myself. yes, it's tricky, but not all that much imo (big +1 to the guy from the YT channel LE55ONS, his videos about this kind of stuff are amazingly well done).
So, the screen is broken, the display is not, but if I bring the phone to the rapair guy he will almost certainly replace the screen and the display for €200+
If I buy something like this
http://www.ebay.com/sch/i.html?_trk...=note+2+replacement+screen&_sacat=0&_from=R40
and replace it myself I can do the whole thing and spend some €50 tops.
I was thinking about this one
http://www.ebay.com/itm/Gray-Front-...093?pt=LH_DefaultDomain_0&hash=item3a7dc376c5
Here come the questions. Can anyone point me towards a good screen replacement for something around $20/30?
Are these Gorilla Glass 2? Is the quality good?
Also, seems like these don't have any connectors, the original one has 2. I can always use the connectors from the old screen, but if someone knows about a screen with connectors included, can they please let me know?
Thank you everyone
1.this is not the note forum.
2.try it,hope you don't break the LCD.
"noob ok...lazy noob not ok"
be careful
theunderling said:
1.this is not the note forum.
2.try it,hope you don't break the LCD.
"noob ok...lazy noob not ok"
Click to expand...
Click to collapse
Shoot, I'm sorry... I tried several search to see if there was a topic about this, I couldn't find one and was already opening a new thread when I saw this among the suggested one... I overlooked the title, thought it was about the note 2. Again, I'm sorry, my mistake.
It doesnt matter.But I reckon theres a 95% chance youll break the lcd.There was a guy posting all over the place that he managed to do it.
Its up to you if you want to risk it.
"noob ok...lazy noob not ok"
Related
Before we were so rudely interrupted in the original thread, we were discussing the G1 hardware keyboard replacements. Please folks, if you must flame each other do it via PMs to avoid locking legitimate threads.
I've been able to find some inexpensive after market replacements on eBay, but still am not sure how difficult it is to actually do that. All the sites I've been able to find on the subject only provide time-lapse dis-assembly instructions of the entire phone. If anyone has done the replacement themselves, I'd greatly appreciate pointers on how to keep my phone operational after I put it back together.
I replaced the white keyboard in my Dream with a black one. It was a scary operation as it takes a bit of force to dismantle. I accidently pulled my antenna off and disconnected a flylead. ment my phone had no signal at all. later when i got home (did it in work ) i took it apart again and fixed it.
Take your time and have patience, alot of it is plastic and clipped together so requires a bit of force.
May I ask what is wrong with the keys on the bronze one? I did a quick skim of the old post and gather that you can't see the keys in daylight but I don't get why?
I'm just genuinely interested, I have a black G1 so never had such a problem.
brummiesteven said:
May I ask what is wrong with the keys on the bronze one? I did a quick skim of the old post and gather that you can't see the keys in daylight but I don't get why?
I'm just genuinely interested, I have a black G1 so never had such a problem.
Click to expand...
Click to collapse
It's the combination of silver keys with light-silver backlight that make the lettering almost impossible to see in day light conditions. I'd take a picture if I had a camera with me today. Whoever came up with that color combination should be fired. Or at least made to stare at it every day for the next year. I have to tilt the keyboard at a weird angle just to distinguish the letters. From what I understand the white G1s suffer from the same problem.
The "Backlight Off" app definitely helps as it lets you toggle the backlight with a keyboard shortcut. I'm looking for a more hardware solution though.
I've been thinking about changing keyboards and housings too. But from what ppl are saying it seems to be pretty exhaustive. Do any of you guys have the service manual? I DL'ed it from somewhere and it goes through each step of disassembly and also shows assembly. I'm sure it would help out to give an idea of what you need. But like I said, even having read the service manual, it's still quite scary.
A full housing from my understanding is a bitc(....doing the KB I can see why. The LCD portions look ridiculously complex in comparison to other phones.
That said if you have the proper tools , good organization or memory , steady hands and patience really shouldnt be "that" tough to do the keyboard.
Heres the thing. Its really not that hard to unscrew things etc...but the piece you need to move in order to get proper access to the KB has 2 ribbons that are a PAIN IN THE ASS to take off and put back properly. Theres so little room for error.If youve never worked with ribbons before BE CAREFUL.
I will say G1 is pretty unique in how its put together , I swear they were determined to make it as complicated as possible
The really pain in the ass part is that the online manual/guide will merely tell you something like "remove part A" but no explanation how. Theres also 2 screws I swear it glossed over leading to frustration when I did the trackball/front keys.
Torx 5 and really good mini screw driver are mandatory.
Nice lil workstation is really helpful..(masking tape ,towel , table lamp or LED headlamp , vitamin/pill cases etc)
Im no mechanical engineer but Ive opened up damn near everything Ive ever owned at some point. Took me a solid 3 hours from start to finish. With major time spent on organizing the screws pieces and those damn ribbons.
I will say the black KB makes a HUGE difference. Black key on the front arent necessary but do look better and add much needed contrast.
KOF33 said:
I will say the black KB makes a HUGE difference. Black key on the front arent necessary but do look better and add much needed contrast.
Click to expand...
Click to collapse
Pics, or it didn't happen
Thanks for the tips!
Chahk said:
Pics, or it didn't happen
Thanks for the tips!
Click to expand...
Click to collapse
As you can see I also replaced the trackball with a glowing white one.
lol at the trackball
doing a case swap is only bad the first time LMAO. I learned a lot, like for example the brass inserts that the screws go into...are not pre-installed. You must CUT Them out of the old housing and HAMMER them into the new oneBut in the end, it turned out very nice.
As far as just replacing the keyboard, it isnt too bad actually once you know what screws hold what down!
-Remove the 6 torx screws for the back housing
-GENTLY pry open the TOP of the casing with a plastic case tool, work your way down to the bottom of the housing. The bottom is a PITA to remove. I usually get it by rocking it gently back and forth
-remove the long and short coax leads from the motherboard side. swing them out of the way
-peel back the tape and GENTLY pull the bottom connector (mouthpiece module) from the motherboard.
-peel back more tape and lift the latch for the keyboard connector (the one on the side)
-Peel the camera module up SLOWLY (it is double side taped down) as well as the imei card. The cam cable is routed under it, lift it all as a unit. When you get to the motherboard, STOP
-Now, gently twist the whole camera and motherboard unit as a whole until it is free of the latch on the side. Gently lift the camera end exposing the 2 small ribbon connectors on the bottom.
-Peel back the tape and GENTLY lift the ribbon connectors out of the board. Place the motherboard/camera unit to the side for now.
-Remove all the black and silver screws for the metal piece. The lcd should stay in place as the mouthpiece plastics kinda hold it for you, but you should still support it to keep from hurting the connections.
-Viola, keyboard access. Remember when you put it back together be sure to re-tape all the connections, else when you drop your phone one of them may pop loose.
Keeping the motherboard and camera/imea plate all as one module saves you from a very difficult connection and will help you keep everything aligned when reassembling it.
I guess the spacebar has 2 functioning buttons, (left and right) ... well my right side just konked on me, and i was wondering if a replacement keyboard off ebay will fix this, or are they just the button "covers"?
the "buttons" are just plastic nubs that make contact on a board behind it. That board would be what you need. I dont know if there are any on eBay, but I have a spare one if you want to PM me for details.
I dropped my G1 about 6 months ago and was devastated. After entirely too much research I finally got the guts to purchase a replacement digitizer and managed to install it successfully. However, in the process I managed to rip the LCD ribbon cable. I then had to order a replacement LCD screen. I've also damaged one of the black ribbon cables pretty severely causing the touchscreen to become unresponsive sporadically. I've just placed an order for one of those ribbon cables and will hopefully have that up and running soon. I've also purchased an entire new housing unit to rebuild the phone to make it look as new.
Now when I first took this thing apart I was by NO MEANS an expert or have ever done something like this before. I'm just an avid enthusiast who wanted to save a little money, feel a sense of accomplishment and to learn a few things along the way. I technically paid nearly the same amount of money it would have cost me to send the unit to HTC for repair, however i've learned everything there is to know about my phone's hardware. I know which board does what and are extremely confident about fixing ANY hardware problem in the future.
If you have the time, patience, and truly want to become confident about the workings of your phone, then I highly recommend fixing it yourself. I've bought my parts for VERY cheap off of reputable ebay buyers. You can find EVERY single piece for your phone on Ebay. My LCD has 1 dead pixel, but I guess that's the risk you take when you buy really cheap parts.
Hope this helps.
How does one go about removing them? I've done a google and XDA-Forums search and found that there are numerous answers all seemingly discounted by any number of people:
toothpaste, no good for capacitive screens
Displex sure, THEY say it's good for the TP2, but so many people say not
So, anyone have any ideas.
And, yes, I know, screenguards are great and the holy grail. I don't have one. So, please, I know I am asking for a cause that I probably could have prevented, but every time I put a screenguard on my device, it was much too mushy and I tried a lot of them.
Thanks in advance.
I would also like to know how to remove the scratches on the screen. The screen guards make the touch screen less sensative. Theres got to be some type of wax or something.
I've used the screen guard that came with my TP2 since day one. My screen is still pretty darn sensitive....
I have skinomi on my tp2 and although it takes alot of patience to put it works flawlessly...ive tried scratching it with keys and the thing just wont scratch!! its awesome..its a bit on the expensive side if you get the entire skin for the phone like i did but its worth the money in my opinion.
go to skinomi.com
I guess T-Cut might work, i used it on my dads samsung and it cleared up the screen some.
When i was a kid we used to wear swatch watches which always got scratched up, we used to use Duraglit made by Brasso which is a metal polish wadding...kinda like cotton wool with a light abrasive in it, which worked wonders!
Something with very light abrasive properties(like toothpaste) should do it but watch out for any solvents and chemicals in the product that may react with or even MELT the plastic!!!!!
most things like T-Cut scratch remover just take a lot of time and patience.
I anything works for you re-post and let us know!
Actually Displex tells you not to use its product on resistive touch-screens.
Anyway, I just ordered iDrops about a week ago and have been trying it for the last day with no results, at all. I've tried variable amounts of pressure, dozens of applications as the instructions say and I've only hurt my phone. All it does it put a strange texture on your phone that makes it grainy and more susceptible to scratches. Even my stylus scratches the phone, now! I had to use a wet cloth to get the graininess away.
My recommendation is not to bother with iDrops. It seems to not work for the TP2.
Hmm, its just an idea but I've been repairing my windscreen today using special resin that cures in direct sunlight. I must say it works pretty well, it's hard to notice the repair. I would try t-cut or other mild abbrasive to get rid of light scratches and fill really bad ones with that resin. Next comes a good screen protector to hide any imperfections.
thanks, but WHAT website
spammmer said:
if your touch screen is very scratch or broken, you can just buy the new touch screen and then replace it, it is easy to do. I also has instruction. you can visit my website.
thanks
Click to expand...
Click to collapse
I see your post, yet, I have no idea what website to which you refer. Nevermind, didn't realize it was in your header.
Why do you not send instructions with the order? IF you're selling replacement parts why then must a customer have to contact you for replacement instructions?
He is just advertising himself. Just find the best price on buy it, you can find the HTC service manual on google.
Not disputing that fact
petard said:
He is just advertising himself. Just find the best price on buy it, you can find the HTC service manual on google.
Click to expand...
Click to collapse
Just questioning that if they sell the parts, why must the instructions be emailed separately?
Bumping because I need the same thing resolved...
Questions:
1) Anyone know a good, semi-reputable site to replace the front screen.
2) Is the front plastic considered part of the LCD Screen, or do they come apart separate? (The scratch on my phone is purely on the outer-most section of the screen, with no damage to the image display) -- I ask as some phones i've seen have an "LCD Display" followed by a "Cover Screen")
3) Regardless of #2's answer, what am I looking to buy (The technical/semi-technical name)? Closest I've seen is LCD Digitizer, but I'm not sure if i need that component or the LCD Screen.... cover.... portion..
Unfortunately the part i saw was $124, and I happen to have insurance on the phone if it does indeed get that expensive, but I just hope the parts are separate ;-)
Thanks,
-Lee
BBM-Lee said:
Bumping because I need the same thing resolved...
Questions:
1) Anyone know a good, semi-reputable site to replace the front screen.
2) Is the front plastic considered part of the LCD Screen, or do they come apart separate? (The scratch on my phone is purely on the outer-most section of the screen, with no damage to the image display) -- I ask as some phones i've seen have an "LCD Display" followed by a "Cover Screen")
3) Regardless of #2's answer, what am I looking to buy (The technical/semi-technical name)? Closest I've seen is LCD Digitizer, but I'm not sure if i need that component or the LCD Screen.... cover.... portion..
Unfortunately the part i saw was $124, and I happen to have insurance on the phone if it does indeed get that expensive, but I just hope the parts are separate ;-)
Thanks,
-Lee
Click to expand...
Click to collapse
I am nearly positive you do not need to replace the LCD. You only need a new digitizer (that is the name of the layer that recognizes touch) which you can find for around $25 online!
petard said:
I am nearly positive you do not need to replace the LCD. You only need a new digitizer (that is the name of the layer that recognizes touch) which you can find for around $25 online!
Click to expand...
Click to collapse
Correct me if I'm wrong but changing this digitizer would void warranty if I were to change it myself ? ?
Go to At&t and see if they will replace it for you if you buy the digitizer. If not ask At&t or find a reputable place that does, ive seen for around $50 which was suggested to me by at&t. It's worth the money trust me! When I had my old LG Incite, I tried replacing the digitizer because my screen was scratched and ended up breaking the lock and camera buttons as well as the touch screen. Since then every phone i've had gets a case and screen protector from the day I lay eyes on it. If the case and screen protector are their after I get my phone I wont use it till their on. Scratches just annoy me but I guess i'm just odd lol.
Ok so I bought my Dell Streak from craigslist, and instantly fell in love with it, until about 6 hours later when I dropped it in my garage and the LCD broke, the top is messed up and black lines keep appearing, at like 6-7 now lol
So I checked out the price on ebay, found some US sellers (dont want to wait a month+ for shipping, even to save $10+) and they seem legit, but I also looked up HOW to replace the screen. I am new to mobile phone replacement but I am good at putting things back together, and have replaced a few laptop LCDs. I noticed the Dell Streak is put together with glue, and "pressure?", and seems a little bit more difficult than a laptop LCD.
Now I am just curious about a few things... What tools (other than the screwdrivers and the plastic wedge it comes with to pry it open) would I need? Do I really need to glue things back together when I reassemble? How dangerous to the other parts is this, is it likely I could break or damage other parts of the phone? Like I said I am new to this but not stupid, and can follow DIY's easily, I just want to make sure I dont dig a hole. I paid $200 for my Streak and broke it within hours!
But let me add, I do love this phone!
ANY AND ALL HELP GREATLY APPRECIATED!!!
You can use the glue thats already there, you should also consider upgrading the internal memory card if you are doing this repair.
Most screen replacements come with both the lcd and covering glass as a unit already. Make sure any replacement you buy has both.
The biggest gotcha I have seen reported is tearing the cable for the capacitive buttons. be very careful when working on that part.
The top and bottom pieces are stuck on with double sided tape. There are a couple of suggested brands in the screen replacements threads both here and at StreakSmart.
In case you missed any of them here are some screen related links:
Replacing the Screen
Guide to replacing the Streak Screen – PDF File, right click and ‘save as‘ to save. From this thread at the Pocketables forum.
Same guide at XDA - discussion of the same guide at the XDA forums
Another XDA thread – earlier thread
Another Screen replacement guide – This one is at the forum at MoDaCo and includes info on replacing the internal SD card.
Another screen replacement thread at StreakSmart
Screen replacement picture gallery – click on a thumbnail to view larger images. The larger images are very big to make details easier to see.
Do anyone has video or pdf or wtever guide to give the instruction how to disassemble the flyer?(i am thinking to repair the flyer myself) Thank you
Here you go:
www.techrepublic.com/photos/crackin...3?seq=2&tag=content;siu-container#photo-frame
thx, but i have 1 more question, do u know how to remove the digitizer? is it the same way as other smartphone?(use hot gun and remove the digitizer?)
athris said:
thx, but i have 1 more question, do u know how to remove the digitizer? is it the same way as other smartphone?(use hot gun and remove the digitizer?)
Click to expand...
Click to collapse
Yes, there is a note in the techrepublic teardown about it being bonded like a smartphone. You should however be vary careful given the size of the screen more heat (not temperature) is required, and the risk of thermally cracking the underlying LCD panel is correspondingly higher.
Beware! Learn from my adventures.
So, I took apart my wife's HTC Flyer this past week to replace the screen. While the Techrepublic teardown shots are helpful, it's missing about ten steps at the end that involve actually removing the screen. I've messed around with tabletpc's and laptops before but not cell phones so wasn't really prepared for the fact that you have to pretty much take the whole Flyer apart in order to be able to get the screen off. As far as I can tell, no one else has documented taking one of these apart to replace the screen. I will write up something more involved when I get a chance but here's a couple things that I found out about the screen.
1. The part of the screen that you touch with your finger and stylus is not glass! It is a heavy plastic layer that is adhered to the glass digitizer. It is clear with the black around the edge and cutout for the HTC logo. This was the part of my screen that had chips in it. I tried to use a screen repair kit to repair the chips (which I did) but it took off the outer, darker finish in the process. So I moved to the next step, replacing the screen. I didn't know about the outer layer, otherwise that would have been much easier to replace. But, I don't think you can get that part unless you have connections with HTC.
2. The outer layer/digitizer glass comes as one part (along with the n-trig connector). I ordered mine for around $50 on ebay.
3. You will need to take the back off and much of the motherboard to be able to disconnect the n-trig connector.
4. Taking the screen off will take heat. I used a hair dryer but more heat could be better although you have to be careful of the lcd underneath. My digitizer broke while removing and ending up putting a small gouge in the lcd. I was able to fix the lcd well enough, just be careful.
5. HTC used a buttload of sticky tape to secure the glass to the lcd and case. My cheap blue pry tool quickly broke so I ended up using a plastic butter knife to separate digitizer from the case. Once off, I used Goo Be Gone to get rid of all the sticky tape from it. I'm ready to put new tape on but I'm not sure exactly what they used. Anyone have any ideas? It's a black, closed cell sticky tape that is really stringy when it comes to taking off. Most of the stuff I see for sale online seems to be really thin stuff. I picked up some Scotch Outdoor Mounting Tape by 3M that looks to be similar that I am going to experiment with. Anyone know for sure what they used?
6. I put the new digitizer on temporarily to check to see if it worked and it did (yay)! But I still need need to cut all of the tape and put it in the right spot. There are also these little plastic tabs that go on the backside of the screen. They are used to refract light from the led's to light up the outside navigation buttons. Be careful not to lose these. I did, and had to make one. We'll see how I did once I get it back together.
7. I found that there's not a lot of parts out there for these things. At least not compared to cell phones. Now that they're being discontinued, I don't know if that is going to help.
Anyway, I took a few pics along the way and will try to write something up when I get more time. I just wanted to give folks a heads-up on the screen and how it's put together. I can't imagine the View's screen is any different. So whatever they're using for the outer layer isn't Gorilla Glass. Or is it?
UPDATE:
Here are the promised photos of this disaster. I'll add the commentary tomorrow (I'm tired).
Two more comments and I can finally upload my photos.
I need to replace my LCD and Glass...anyone know where I can order these parts...I cant find them anywhere.
Hard to find parts for the Flyer/View which could be a problem. Looks like some is selling an LCD, though on eBay.
http://www.ebay.com/itm/PH-LCD-HT-2...360?pt=LH_DefaultDomain_0&hash=item27bf8f0390 from my PG41200 using Tapatalk
I purchased mine here and it works great.
http://www.ebay.com/itm/260906551668?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Much better price. What kind of tape did you use? Also did you have to replace any of the light reflacting plastic tabs that are used to light the buttons around the outside of the digitizer?
Sent from my PG41200 using Tapatalk
Will a replacement screen for the Flyer work well on a View?
I don't see why not. Except for some of the internals, they are pretty much identical hardware wise.
Had a small hairline crack across the screen.
So I purchased a replacement glass,
watched several youtube videos on how to change the glass (phone was working perfectly)
came off no problem, very easy as a matter of fact.
replaced with new glass.
phone turns on, nothing goes on the screen.
what happened? did I ruin the digitizer?
never touched it with the razor knife one time but it did have a few flakes of glass on it so I lightly brushed them off with a hairless cloth.
what I do????
****.
it turns on and if I call it, it rings but dead screen.
how did I kill it?
it turns on and if I call it, it rings but dead screen.
how did I kill it?
Why did YOU fixed it yourself?
Anyway, check if all something is not connected...
that is the response I get? seriously?
I watched several videos, all said if you take your time, its easy. I took my time and it came off easy and went back in easy.
wondering what I could have done wrong. I do not think there are things that I needed to "hook back up" to get it to work correctly again.
somehow I fried the touch screen and I do not know why.
So, maybe I should be a bit more specific.
IF, you understand and know about how this would happen. Or if you are experienced in the build/construction of telephones and could shed some light on it for me I would appreciate it.
if you have no clue, I really do not need to hear it...
thanks
I'm not an expert but if it turned on before but now it doesn't, its dead jim. You probably heated it up too much. I think the suggested heat is 170-180 F.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
my second post. " IT TURNS ON but the screen does not."
I can call it and it will ring BUT THE SCREEN DOES NOT TURN ON!!!!
The screen is probably dead but I am hoping someone who knows about it can give me advice on how to maybe fix it.
that is the help I am looking for!
I believe only way to fix "it" at this point is to buy a new lcd which at this point youre better off buying one with the lcd-digi-glass. I say this because if there was a chance at slightly fixing a bad LCD it would involve hard work with tools beyond your reach and or experience.
Edit: Just out of curiosity, did you disconnect the LCD screen during the disassemble? Make sure its connected properly.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
pblocal said:
that is the response I get? seriously?
I watched several videos, all said if you take your time, its easy. I took my time and it came off easy and went back in easy.
wondering what I could have done wrong. I do not think there are things that I needed to "hook back up" to get it to work correctly again.
somehow I fried the touch screen and I do not know why.
So, maybe I should be a bit more specific.
IF, you understand and know about how this would happen. Or if you are experienced in the build/construction of telephones and could shed some light on it for me I would appreciate it.
if you have no clue, I really do not need to hear it...
thanks
Click to expand...
Click to collapse
Oi! Don't get snappy!
He was trying to help you!
Little sh*ts like you should get banned!
CyanogenModded Very China-like, from my Samsung Galaxy S III
LG Familyguy59/Beatsleigher
BHARGAV33 said:
Anyway, check if all something is not connected...
Click to expand...
Click to collapse
pblocal said:
that is the response I get? seriously?
Click to expand...
Click to collapse
Seems fairly sensible question to ask, especially when your providing so few details. When you checked the screen immediately after connecting it up did it work? If so it's entirely possible one of the connectors has worked loose during re-assembly, if not it's always possible that the new screen was supplied faulty.
I guess I owe an apology to whomever I offended. I was extremely frustrated by the fact I just killed my freaking phone and was hoping someone could tell me a specific thing or two to look for to make sure it was reinstalled correctly.
I was not looking for a, "why did you do it yourself type of statement. Obviously, hindsight tells me I should not have touched it. I understand that now. What I am/was looking for was constructive advice from someone who knows.
Honestly, I do not think there is anything that needs to be "re-hooked up". It was just the glass.
Here is another description, maybe someone who has done it before or knows the correct way to "re-hook it up" can explain a bit more in detail.
Yesterday, I tried to fix just the glass part of the phone, no electronic parts underneath. Just remove the broken glass and replace it with a new one.
I watched several in depth videos on youtube on how to do it. Very straight forward, easy/squeezy.
You heat the phone, use very thin items (razor knife) to very slowly remove the glass from around the edges. Do not tough the screen underneath at all.
I did just that. The screen came off much easier than anticipated. I was thinking I was golden.
Then I replaced everything the way it was, put the new glass back on. and turned it on and blammo, no more screen.
so, once again, I am requesting help from someone who has done this or who knows exactly what I should look for if I remove the new screen to see if something was replaced wrong.
thanks....
pblocal said:
I guess I owe an apology to whomever I offended. I was extremely frustrated by the fact I just killed my freaking phone and was hoping someone could tell me a specific thing or two to look for to make sure it was reinstalled correctly.
I was not looking for a, "why did you do it yourself type of statement. Obviously, hindsight tells me I should not have touched it. I understand that now. What I am/was looking for was constructive advice from someone who knows.
Honestly, I do not think there is anything that needs to be "re-hooked up". It was just the glass.
Here is another description, maybe someone who has done it before or knows the correct way to "re-hook it up" can explain a bit more in detail.
Yesterday, I tried to fix just the glass part of the phone, no electronic parts underneath. Just remove the broken glass and replace it with a new one.
I watched several in depth videos on youtube on how to do it. Very straight forward, easy/squeezy.
You heat the phone, use very thin items (razor knife) to very slowly remove the glass from around the edges. Do not tough the screen underneath at all.
I did just that. The screen came off much easier than anticipated. I was thinking I was golden.
Then I replaced everything the way it was, put the new glass back on. and turned it on and blammo, no more screen.
so, once again, I am requesting help from someone who has done this or who knows exactly what I should look for if I remove the new screen to see if something was replaced wrong.
thanks....
Click to expand...
Click to collapse
Right. Now that is much better. If you would have asked like this from the beginning, we would have helped you.
Now, I personally haven't done this before, but what did you heat the phone up with?
It's possible that you have de-soldered some contacts for the screen's ribbon cable. If you have done that, you may want to open up the phone and check. If that is the case, I'd send it to Samsung or a repair centre. Of course, you'll get the same questions as here, but they should be able to help you. You could always send it to http://mobiletechvideos.com and check if they can do things like that for you, after all, they are a universal repair service.
I hope this helps you a little bit.
Oh, and don't say thanks, click it (Each and every answer. Even mine!)
---------- Post added at 03:34 PM ---------- Previous post was at 03:32 PM ----------
pblocal said:
it turns on and if I call it, it rings but dead screen.
how did I kill it?
Click to expand...
Click to collapse
Oh. By the way: bumping posts is against the community rules - It counts as spam. Next time I will report the post immediately.
I just searched xda, look what I found.
"Oh and one more thing to add. Do not get fooled into buying those "glass only" front panel replacement kits on ebay for $20-$30. You'll just end up with a nice conversation piece on how you got scammed out of $20-30. I do not even know why they sell those for, they even include these cheap ass tools making it look more legit, like there is somehow a way to actually replace it. It's a full on scam if you ask me. I feel sorry for the poor saps who pick up broken glass S3's on ebay for $350-400 thinking it will only cost them $30 bucks to replace the screen and they'll have a like new S3. Suckers....
It is 100 percent impossible to replace just the front glass panel on the Galaxy S3. The glass panel is fused entirely to the LCD, and the whole LCD is glued to the frame. There is no way to "separate" the glass from the LCD without destroying both.
Bottom line, you need to purchase the LCD and Glass Digitizer as a complete assembly, around $200. To make life easier, you should buy it with the frame also, around $220-240 so you won't have to curse and ***** when you try to pull your old LCD and digitzer from your old frame,broken piece by piece. "
I am one of those suckers! I guess I need a new LCD/Glass Digitizer with the frame and then pay someone to do it correctly!
DAMN!!!!
pblocal said:
I just searched xda, look what I found.
"Oh and one more thing to add. Do not get fooled into buying those "glass only" front panel replacement kits on ebay for $20-$30. You'll just end up with a nice conversation piece on how you got scammed out of $20-30. I do not even know why they sell those for, they even include these cheap ass tools making it look more legit, like there is somehow a way to actually replace it. It's a full on scam if you ask me. I feel sorry for the poor saps who pick up broken glass S3's on ebay for $350-400 thinking it will only cost them $30 bucks to replace the screen and they'll have a like new S3. Suckers....
It is 100 percent impossible to replace just the front glass panel on the Galaxy S3. The glass panel is fused entirely to the LCD, and the whole LCD is glued to the frame. There is no way to "separate" the glass from the LCD without destroying both.
Bottom line, you need to purchase the LCD and Glass Digitizer as a complete assembly, around $200. To make life easier, you should buy it with the frame also, around $220-240 so you won't have to curse and ***** when you try to pull your old LCD and digitzer from your old frame,broken piece by piece. "
I am one of those suckers! I guess I need a new LCD/Glass Digitizer with the frame and then pay someone to do it correctly!
DAMN!!!!
Click to expand...
Click to collapse
I'm glad you and the search engine have met
Yeah, that would explain a lot. I actually feel sorry for you, man. Good luck with getting that fixed!
yeah, the funny thing is, I searched all over google and did not think about searching here.
Why? I have no freaking clue. Just plain stupid of me.
I already sent an email request to mobiletechvideo.com. I hope they can fix it, if I send it to them.
Thanks for your helpful advice. This is what I was looking for.
(oh, and the repeat of the same statement from yesterday was not for a bump, it was a mistake. I did not see it so I posted it again. if you look it was only 5 minutes apart)
once again, thanks, I also hit your "thank you" meter!
pblocal said:
It is 100 percent impossible to replace just the front glass panel on the Galaxy S3. The glass panel is fused entirely to the LCD, and the whole LCD is glued to the frame. There is no way to "separate" the glass from the LCD without destroying both.
Click to expand...
Click to collapse
that's not true though, it's just very difficult