Usb transfer hanging & freezing - AT&T Samsung Galaxy Note I717

Does anyone know how to fix usb transfer from hanging when transfering or deleting a large file via pc. The progress bar will allways stop during transfer. Very annoying and it happens with all kinda of files not just a certain type. I think mtp and usb transfer are both doing it ! Its Been occouring for months on various roms just got to me now. help lol
Sent from my SGH-I717D using xda app-developers app

try a different cable

From what I recall, most CM9/AOSP/AOKP roms have a data transfer issue. Transfer speeds are compromised and such.
You can try adjusting the SD card buffer w/ Rom Toolbox lite, or I use Samsung Kies Air to transfer via wifi, or just take out the darned Micro SD and slot it into my laptop and transfer.

I have tried two oem samsung cables. and its effects both internal and external cards. Atm im Running stock ics maybe it followed me from a asop rom? Anyway to reflash the stock usb properties? Or maybe the phones port is bad...?
Sent from my SGH-I717D using xda app-developers app

if you flashed and wiped properly nothing gets left over... if you wish, just full wipe and reflash the Rom.
Does this happen on all pcs?

Related

[Q] (Q) Getting SD Card to read on Gingerbread Roms\Radios

Is there a way I can get my SD card mounted or read when conected to usb? it doesnt work on the Gingeritis Rom. No complaints to the Rom because I love it but just needed suggestions.
Change your charge mode to charge only? And if it is on that, change to pass through, give it a couple minutes and then change back. It sometimes seems to get stuck in the wrong mode.
Sent from my ADR6400L using XDA App

USB mass storage slow

I am facing slow write speeds while sdcard is mounted. I may say that these slow speeds appeared after I have used S2E app, but right now I've erased all the SDCard and created a single FAT32 partition.
I don't know the cause of these slow speeds, may be the CM7? I'm currently using beta 6.5.2, but on all versions of CM7 was behaving the same. It seems that is a little faster when mounted in recovery, but while mounted while the android is up, the speed is very slow, less than 1 MB/s. Also the CPU usage is very high while writing.
Reading from the SDCard is very fast, over 10 MB/s. The card is a Kingmax class 4.
The card performs very well in a card reader, but it becomes frustrating that I cannot use it properly, it even writes faster while connected to a FTP server on the phone.
Any idea what can it be or does it happen to anyone else?
Sent from my LG-P500 using XDA App
Buy sd card booster from market, or flash franco kernel. Xd
I've tried the sd card tool. It still doesn't work as it should. Mounted in recovery the write rate is over 5 MB/s and is constant. But when using both development mode and mass storage mode (development mode off), the speed is very low and also the file transfer almost hangs.
Looking in logs I could see frequent USB connects/disconnects which I cannot explain. The rom is freshly installed, also using franco kernel. I repeat, in recovery mode all is working as it should. Tried on multiple computers with USB drivers installed and reinstalled.
Thanks to everybody who is reading this, but I really don't know what to do with this issue.
Sent from my LG-P500 using XDA App
Andy's rc3 rom solved this issue :d
Sent from my LG-P500 using XDA Premium App
Try hard reset, and remove unwanted apps..

[Q] USB Connected ==> no SD Card recognized

I feel like a total noob, so please be kind.
I connected my TB to the home PC today (windows XP), but I cannot access the SD card.
When connected to PC, SD Phone & Storage/Unmount SD card is grey'd out.
When disconnected from PC, SD PHone & Store/Unmount SD card is white (available).
My settings:
USB Connection type: Disk drive
Applications/Development: USB debugging is checked
I know for sure that I've been able to access the SD card when connected before. What in the heck am I doing wrong??
What's you're ROM?
Stock ROM. I'm trying to get rooted and need to transfer files to SD card.
Sent from my ADR6400L using XDA App
I should also note...when connected to PC I can see the phone via Windows explorer. Just not the SD card. Weird.
Sent from my ADR6400L using XDA App
You might try reseating the card?
I can read and write to the card no problem on the phone. It's the PC that can't see it. I have some pics and video of my kids on there right now so I want to avoid formatting unless absolutely necessary. I'll try reseating, rebooting phone and pc, and see if that kicks anything loose.
Sent from my ADR6400L using XDA App
Guessing here, but if you are running a GB Rom with an older kernel, you might need to put the phone into internet passthrough mode, wait about 5 secs, then change it to disk drive. That problem was fixed in later kernels.
Sent from my ADR6400L using XDA Premium App
Make sure you pick disk drive mode and then wait. It takes sometimes a minute plus for my pc to see the second drive (sd card), first one (verizon) comes up quick.
After much tinkering in the past 12 hours I'm convinced the issue is on the Windows XP side and not my phone. I cannot access my wife's SD card either (she also has a thunderbolt). But I CAN access the SD cards in both phones via Ubuntu. So although I've got it narrowed down to XP, I still haven't figured out how to get XP to see it.
Sent from my ADR6400L using XDA App
idahonld said:
After much tinkering in the past 12 hours I'm convinced the issue is on the Windows XP side and not my phone. I cannot access my wife's SD card either (she also has a thunderbolt). But I CAN access the SD cards in both phones via Ubuntu. So although I've got it narrowed down to XP, I still haven't figured out how to get XP to see it.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
did you just connect and wait for a couple of minutes?
you might also want to check device manager make sure windows didn't have in issue loading. I've seen that happen, second the thoughts on waiting a few minutes to see if it shows. Had that happen a few times on windows machines.
Yeah, I waited about 20 minutes hoping something positive would happen. Nothing. I uninstalled the phones driver from 'My Computer/Manage'. Then rebooted the PC. Then plugged the phone back in. It downloaded a fresh driver. Still no SD card tho. Maybe its tome to reinstall XP and see if that fixes the problem.
Sent from my Thunderbolt via XDA App
Have you updated your drivers on your PC?
I have a computer running XP and I can see my sd card just fine on my TB.
I did have an older drivers and needed to load an newer one for it to work when I getting ready to first root my phone as well.
Try running this tool:
http://www.nirsoft.net/utils/usb_devices_view.html
I'm running x64 Windows 7, so I doubt the verison I have will help you. You can get a 32bit version from the link.
It's USBDeview and allows you to see all current connected USB devices as well as all previously used devices. Found it here on another thread, and it was fixing a number of user's issues.

[Q] Anyone having problems copying files to the Tab?

I'm not sure if this is a problem with all samsung devices, just my tab, or perhaps even my computer:
Whenever I try copy a large file, say a movie, the transfer stops half way through and I get a message saying "The device has stopped responding" So I break it into smaller pieces and transfer separately, which works. Then, after I disconnect the USB, I get a repeated toast "Media Scanner Running" every few seconds. Whenever I try open the Video Player, Music, Gallery or even Camera, they close right away. So I read somewhere online that this is Samsung's crappy media scanner. I cleared the data from the media app and then I see a message "media scanning completed" and now I'm able to access these apps, though they show no files.
I have finally resorted to streaming over wifi from my desktop to the tab. Is anyone else facing these issues?
I'm currently on the latest overcome ROM, but I've seen the same issues on AOKP, Task and even the stock 3.2 rom.
I just found this post and would like to say that I too am having this problem, it happened with the stock ROM and after ROOT with Task650 ROM... I was worried it was the hardware in the Tablet. I was wondering if you ever resolved this or found a way around, as I too can't transfer large files (my movies) to it, it just times out.
I will also have this problem, only with Android 3.2
with CM9 I had not more ', which are now in stock, it has returned to make, so it's the rom
I used to have this problem when I had my sleep timer set to 1 minute. I now set it on 5 minutes, and have yet to see the problem reoccur. I just loaded a 2.5 gigabyte folder to it this morning without a hitch. I am not sure that is the solution to your problem, I have done many things since then...any of which could have resolved the issue. I am a flashaholic, so it may have been resolved on one of my more recent wipes (I always restore to stock and completely factory reset my tablet prior to loading another rom).
Regardless, try changing your sleep setting to 5 or 10 minutes and see if this resolves your issue. Post back your results!
Sent from my GT-P7510 using XDA Premium HD app
mauwri37 said:
I will also have this problem, only with Android 3.2
with CM9 I had not more ', which are now in stock, it has returned to make, so it's the rom
Click to expand...
Click to collapse
I doubt it's the Rom, as I have used them all. It's more likely a setting or a driver issue....I am leaning towards settings.
Sent from my GT-P7510 using XDA Premium HD app
Are you transferring using Explorer or Kies? Try using Kies and see if it has the same problems if you were using explorer.
I will try changing the sleep setting, that's a good idea I had not thought of this. I am transferring through explorer - I will try it tonight and post back my results.
xtacydima said:
I will try changing the sleep setting, that's a good idea I had not thought of this. I am transferring through explorer - I will try it tonight and post back my results.
Click to expand...
Click to collapse
Looks like this didn't help me, the transfer failed. Also, I keep hearing the USB connect/disconnect sound all throughout while the tablet is plugged in, and yes I tried different USB ports. I even uninstalled Kies and tried. Same issue.
Sometimes toggling usb debugging on the tablet works for me. Seems like the tab drivers don't play nice with some usb controllers.
Sent from my SCH-I905 using Tapatalk 2
xtacydima said:
Looks like this didn't help me, the transfer failed. Also, I keep hearing the USB connect/disconnect sound all throughout while the tablet is plugged in, and yes I tried different USB ports. I even uninstalled Kies and tried. Same issue.
Click to expand...
Click to collapse
Hrrmmmm, interesting. It sounds like one of 2 things is happening:
1. Your connection between your tablet and your computer is intermittent, whether it be the cable or the pins on your tablet connection.
Or
2. For some software related reason your computer cannot keep your tablet mounted. You may try going into your devices tab on the task manager and remove all references to your tablet, then try plugging ur tablet back in.
Sent from my GT-P7510 using XDA Premium HD app
you can install a kernel that allows to disable mtp and mount ass mass storage, it solved the problem for me and is also way faster.
cheers

[Q] Missing USB Options, Phone doesn't recognize USB

Hello,
I just upgraded from a Samsung Vibrant to a Samsung Galaxy s2. The phone is used but is stil in excellent working condition - so it seems.
I have been trying to transfer my old SMS, contacts, etc to the s2, and I have backed them up onto a xml file via the Super Backup app. However, it seems virtually impossible to get the xml file onto the s2 because the USB is not connecting the phone to my MacBook pro. When I plug it in, the phone charges, but nothing else happens. Nothing comes up on the drop down menu, and there are no USB options in the settings. There is no "Applications" menu, and no "USB Utilities" under Wireless & Network. The phone came with '4.1.2 jzo54k' if that helps at all. The phone does not show up as a device on my Macbook either. I have tried different ports, different cables, nothing. When I plug in my Vibrant which is running 2.2, the laptop recognizes it. Keis also doesn't recognize it.
Any advice on how to restore my USB functionality or how to transfer texts and contacts without it is greatly appreciated!!! Please let me know if I need to provide any additional info.
akujieze said:
Hello,
I just upgraded from a Samsung Vibrant to a Samsung Galaxy s2. The phone is used but is stil in excellent working condition - so it seems.
I have been trying to transfer my old SMS, contacts, etc to the s2, and I have backed them up onto a xml file via the Super Backup app. However, it seems virtually impossible to get the xml file onto the s2 because the USB is not connecting the phone to my MacBook pro. When I plug it in, the phone charges, but nothing else happens. Nothing comes up on the drop down menu, and there are no USB options in the settings. There is no "Applications" menu, and no "USB Utilities" under Wireless & Network. The phone came with '4.1.2 jzo54k' if that helps at all. The phone does not show up as a device on my Macbook either. I have tried different ports, different cables, nothing. When I plug in my Vibrant which is running 2.2, the laptop recognizes it. Keis also doesn't recognize it.
Any advice on how to restore my USB functionality or how to transfer texts and contacts without it is greatly appreciated!!! Please let me know if I need to provide any additional info.
Click to expand...
Click to collapse
First off are you sure you have the i777?
Sent from my Zanpakuto using Getsuga Tensho!
You probably want to return to stock. Since you are using a Mac you need to use heimdall. Here is a link to the post.
http://forum.xda-developers.com/showthread.php?t=1746181
Sent from my SGH-I777 using xda premium
Nick281051 said:
First off are you sure you have the i777?
Sent from my Zanpakuto using Getsuga Tensho!
Click to expand...
Click to collapse
Yes. Model Number: SGH-I777
Red_81 said:
You probably want to return to stock. Since you are using a Mac you need to use heimdall. Here is a link to the post.
http://forum.xda-developers.com/showthread.php?t=1746181
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Would I be able to do that without the USB? Because as it is, I can't transfer files or anything of the sort
I believe heimdall will take care of that. It does on a Windows system. I'm not sure about a Mac
Sent from my SGH-I777 using xda premium

Categories

Resources