I have installed this rom "liberated_aria_ddx_FR008_signed.zip (De-odexed)" with CWM 2.5.1.7 and i make full wipe but when the phone has finished booting getting an error and the phone can not be used.I have always a black screen
Where mistake.
pa.em said:
I have installed this rom "liberated_aria_ddx_FR008_signed.zip (De-odexed)" with CWM 2.5.1.7 and i make full wipe but when the phone has finished booting getting an error and the phone can not be used.I have always a black screen
Where mistake.
Click to expand...
Click to collapse
What is the error? You could also try updating your recovery and reflashing it (don't forget to format partitions and factory reset).
Theonew said:
What is the error? You could also try updating your recovery and reflashing it (don't forget to format partitions and factory reset).
Click to expand...
Click to collapse
That ROM can't be flashed with newer versions of CWM because it uses amend scripting.
I found the problem... the problem is the sim card not compatible with the rom, i remove it and the phone boot normal and after the initial configurazione re insert the sim... thank you
Inviato dal mio GT-I9300 con Tapatalk 2
Related
Hi,
so I tried to install a new theme and during the install the phone froze. I tried to access the recovery again, but I can't, the phone stucks at galaxy s3 screen. However I can access download mode.
My question is, what do I have to do to keep my SD Card content (like pictures)? Which firmware should I flash? I was on Wanam Lite Rom.
Thanks for Help
Matt
MadMatt89 said:
Hi,
so I tried to install a new theme and during the install the phone froze. I tried to access the recovery again, but I can't, the phone stucks at galaxy s3 screen. However I can access download mode.
My question is, what do I have to do to keep my SD Card content (like pictures)? Which firmware should I flash? I was on Wanam Lite Rom.
Thanks for Help
Matt
Click to expand...
Click to collapse
Flashing a theme will not mess your recovery partition so it cannot happen that you have lost recovery..so try again..
Once you are able to boot into recovery flash the ROM which you were using without a wipe first...you will not loose anything..if you face problems then wipe data/factory reset in CWM ..even then you will not loose the data on your internal SD..
zoot1 said:
Flashing a theme will not mess your recovery partition so it cannot happen that you have lost recovery..so try again..
Once you are able to boot into recovery flash the ROM which you were using without a wipe first...you will not loose anything..if you face problems then wipe data/factory reset in CWM ..even then you will not loose the data on your internal SD..
Click to expand...
Click to collapse
I know that it seems strange but I'm not able to access it. I tried to install
http://forum.xda-developers.com/showthread.php?t=1844756
on my wanamlite since someone wrote it would work (I did a nandroid backup first). However the installation froze and I had to pull the battery. Since then it won't boot or boot into recovery (the syiah kernel flash screen doesn't show up either).
MadMatt89 said:
I know that it seems strange but I'm not able to access it. I tried to install
http://forum.xda-developers.com/showthread.php?t=1844756
on my wanamlite since someone wrote it would work (I did a nandroid backup first). However the installation froze and I had to pull the battery. Since then it won't boot or boot into recovery (the syiah kernel flash screen doesn't show up either).
Click to expand...
Click to collapse
Then flash CWM using odin.. Then flash the ROM after a full wipe or restore your backup
sent from here, there, somewhere!!
zoot1 said:
Then flash CWM using odin.. Then flash the ROM after a full wipe or restore your backup
sent from here, there, somewhere!!
Click to expand...
Click to collapse
thanks for that
by the way, do u have any idea how this could happen? i mean it was just a theme file and im a bit confused... what shoud I do next time if a cwm installation freezes? Is it okay to pull the battery? any other opportunities?
Cheers
I used CF auto root and then installed CWM 6.0.2.7 to install the CM10.1 rom. I copied gapps and cm10.1 on my external sd card but when I tried to install it I got an error, and now my phone is stuck on boot.
Please Help!!!
clear data
Glebun said:
clear data
Click to expand...
Click to collapse
I did a wipe data/factory reset from CWM but it didn't work
I guess reflash the old rom
Did you format data and system before flashing?
Glebun said:
I guess reflash the old rom
Click to expand...
Click to collapse
Thanks, now its not stuck on boot, but I still would like to get cm10.1. Any ideas on why it didn't work?
Been using twrp since rooting note II. I wanted to try out 4.4 PA but they said to only use cwm. It was late so I decided to be lazy and since I used to use rom manager all the time I installed it to flash cwm recovery then booted into recovery to install touch version. It wasn't showing the touch version so selected to restart to check to see where I saved it to it would not boot past the first "note II" splash screen. Battery pull then back into recovery and went ahead and flashed PA 4.4 and now it will get past the splash screen then shows boot animation but then starts all over.
Is this a rom manager issue?
can I flash twrp from within cwm recovery?
will I have to basically reroot it?
Any suggestions on how to get back to twrp and to a usable phone?
thanks
If you download a .zip of twrp and flash it you will have twrp for your recovery.
As long as you flash a rooted rom, you will be rooted.
Not sure what happened with the boot loop, did you by chance wipe the system without flashing another before booting?
Sent from my SCH-I605 using Tapatalk
cadavjo said:
If you download a .zip of twrp and flash it you will have twrp for your recovery.
As long as you flash a rooted rom, you will be rooted.
Not sure what happened with the boot loop, did you by chance wipe the system without flashing another before booting?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Nope did my standard wipe cache, wipe dalvik, and factory reset then flashed rom then gapps. Going to go back to twrp and wait for 4.4 to be more stable before I try it out again and maybe then I can use twrp to flash it.
thanks for the help
cadavjo said:
If you download a .zip of twrp and flash it you will have twrp for your recovery.
As long as you flash a rooted rom, you will be rooted.
Not sure what happened with the boot loop, did you by chance wipe the system without flashing another before booting?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
that didn't work. flashed newest twrp then rebooted into it and tried to flash tweaked and sticks at the splash screen again
jdpeck said:
that didn't work. flashed newest twrp then rebooted into it and tried to flash tweaked and sticks at the splash screen again
Click to expand...
Click to collapse
Have you wiped data at all? You need to wipe data / factory reset when switching roms, and it sounds like you havent.
fallingup said:
Have you wiped data at all? You need to wipe data / factory reset when switching roms, and it sounds like you havent.
Click to expand...
Click to collapse
As stated above, on both cwm and twrp I wiped caches and did factory reset and still having the issues. Once back on twrp I even formatted internal memory thinking maybe rom manager messed something up on it and still can't get passed the splash screen.
jdpeck said:
As stated above, on both cwm and twrp I wiped caches and did factory reset and still having the issues. Once back on twrp I even formatted internal memory thinking maybe rom manager messed something up on it and still can't get passed the splash screen.
Click to expand...
Click to collapse
Copy a ROM to your SD card (external not internal)
Install cwm and format data (actually full format, where /data/media gets wiped) and system
Install rom
Reboot
TWRP has some issues randomly with corrupting /data, that's why I no longer use it.
fallingup said:
Copy a ROM to your SD card (external not internal)
Install cwm and format data (actually full format, where /data/media gets wiped) and system
Install rom
Reboot
TWRP has some issues randomly with corrupting /data, that's why I no longer use it.
Click to expand...
Click to collapse
Finally got it. Thought using odin to flash back to root 66 and start fresh would work but after that it was still going to the splash screen then black and a battery pull had to be done. TWRP back ups would fail when trying to restore, so I reverted back to an older version of twrp and it finally let a back up be installed and it booted up just fine!!
thanks for all the suggestions
Im having a similar problem to yours, I am using twrp and flashed PA 3.99 the phone works great, but if my battery dies or i restart the phone or shut it down it automatically wont get passed the samsung logo, or sometimes the PA logo, the only work arounds ive seen to it is to wipe the cache and dalvik to boot, but when that fails i have to install the whole rom over again. any ideas?
Hi guys,
i started this with a oneplus x 2.1.2. i wiped the dalvik system and cache and tried to install the 2.1.3x full zip. i got the error message Error executing updater binary ... then i tried to wipe the data also but it didnt change. i still get this error message. i also tried different zips (all of them were full zips of course).
the oneplus x was rooted, twrp 2.8.7.0. i dont have a backup. the recovery is still accessible.
how can i get my phone functional again?
Same here! Unable to install any custom Rom (I've tried to install some, including Resurrection Remix and CM12) because of that error.
Searching solution all around a million of forums, but it seems that nothing can solve this problem, so I turned back to stock.
(I've also tried with the stock recovery, but it failed too)
Sorry for my bad English, I'm Italian. ?
Inviato dal mio ONE E1003 utilizzando Tapatalk
DYR0 said:
Hi guys,
i started this with a oneplus x 2.1.2. i wiped the dalvik system and cache and tried to install the 2.1.3x full zip. i got the error message Error executing updater binary ... then i tried to wipe the data also but it didnt change. i still get this error message. i also tried different zips (all of them were full zips of course).
the oneplus x was rooted, twrp 2.8.7.0. i dont have a backup. the recovery is still accessible.
how can i get my phone functional again?
Click to expand...
Click to collapse
Have you tried doing a re-flash of TWRP from fastboot mode?
Remove the first line in the updater.script file and it will work.
MrKhozam said:
Have you tried doing a re-flash of TWRP from fastboot mode?
Click to expand...
Click to collapse
No, i have Not. Just the normal process?
Zoeriva said:
Remove the first line in the updater.script file and it will work.
Click to expand...
Click to collapse
What does it change?
Zoeriva said:
Remove the first line in the updater.script file and it will work.
Click to expand...
Click to collapse
Updater.script of TWRP?
Inviato dal mio ONE E1003 utilizzando Tapatalk
i just had to reflash the twrp now i could flash the rom. thanks a lot for your help
so i factory reset my grand quattro and i cant boot into system,every time i try to boot it goes into cwm recovery screen and now there is an option to flash rom via zip but i dont have any rom as i reseted my internal card so what will i have to do ?
Did you reset your phone from reset option availabale in cwm?
Did you wipe cache?
Did you wipe dalwik cache?
zooperaj said:
Did you reset your phone from reset option availabale in cwm?
Did you wipe cache?
Did you wipe dalwik cache?
Click to expand...
Click to collapse
yes i did
If you took backup of your original rom, try to restore it
And if you did not backup, try to flash original rom thru odin
download the rom using pc and transfer it to memory card ,put the memory card into ur phone and then flash it through cwm recovery
arjuntsgowda said:
download the rom using pc and transfer it to memory card ,put the memory card into ur phone and then flash it through cwm recovery
Click to expand...
Click to collapse
Thanks i did get into system by installing new rom droid win now it says supersu needs update but i cant cause it says installation of binaries failed ,otherwise my phone is working as expected or even better, :highfive:
granddd said:
Thanks i did get into system by installing new rom droid win now it says supersu needs update but i cant cause it says installation of binaries failed ,otherwise my phone is working as expected or even better, :highfive:
Click to expand...
Click to collapse
Even i have droidwin5 release 3.2.4
But i never had problem with updating supersu binaries.
I think there are two methods, either normal or flashing through cwm.
Try both