I'm having a bit of a problem flashing this rom (http://forum.xda-developers.com/showthread.php?t=1782771) onto my X10i. I've tried both the FXP and championswimmer kernels with the same abort message ("assert failed", then a couple of lines of text). Does anyone know the cause of this problem and/or a fix?
Installed the kernels from the very latest Flashtool (0.9.0.0), and I'm pretty sure the phone is rooted (I used to run doomkernel v6 medium overclock). Thanks in advance.
EDIT: Also, having a bit of a problem of mass storage from champswimmer's kernel. My computer seems to fail to find drivers for it whenever I connect it for mass storage and doesn't find it either. Anyone know about this as well?
Panzerfaust101 said:
I'm having a bit of a problem flashing this rom (http://forum.xda-developers.com/showthread.php?t=1782771) onto my X10i. I've tried both the FXP and championswimmer kernels with the same abort message ("assert failed", then a couple of lines of text). Does anyone know the cause of this problem and/or a fix?
Installed the kernels from the very latest Flashtool (0.9.0.0), and I'm pretty sure the phone is rooted (I used to run doomkernel v6 medium overclock). Thanks in advance.
EDIT: Also, having a bit of a problem of mass storage from champswimmer's kernel. My computer seems to fail to find drivers for it whenever I connect it for mass storage and doesn't find it either. Anyone know about this as well?
Click to expand...
Click to collapse
Install a cm7 rom first, follow op instructions. Configure and reboot the rom and now you have cm7 as base,now you can install any ics rom.
Sent from my Desire HD using xda premium
Panzerfaust101 said:
I'm having a bit of a problem flashing this rom (http://forum.xda-developers.com/showthread.php?t=1782771) onto my X10i. I've tried both the FXP and championswimmer kernels with the same abort message ("assert failed", then a couple of lines of text). Does anyone know the cause of this problem and/or a fix?
Installed the kernels from the very latest Flashtool (0.9.0.0), and I'm pretty sure the phone is rooted (I used to run doomkernel v6 medium overclock). Thanks in advance.
EDIT: Also, having a bit of a problem of mass storage from champswimmer's kernel. My computer seems to fail to find drivers for it whenever I connect it for mass storage and doesn't find it either. Anyone know about this as well?
Click to expand...
Click to collapse
Hi Panzerfaust,
I've been expecting the same issue, but then i realized that i didn't have my Bootloader UNLOCKED, so i went to this post http://forum.xda-developers.com/showthread.php?t=1254087, i downgraded back to 2.3.3 and then UNLOCK my bootloader using the information of header post of provided link
"If you aren't keeping your current device configuration (because of flashing another rom after unlocking bootloader or anything else) the simplest way to unlock is to flash stock 2.3.3 rom, root it and use the bl unlock plugin from latest flashtool"
Check attachment
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then installed it again and ran without issue
Hope that's help
Regards
vichoh said:
Hi Panzerfaust,
I've been expecting the same issue, but then i realized that i didn't have my Bootloader UNLOCKED, so i went to this post http://forum.xda-developers.com/showthread.php?t=1254087, i downgraded back to 2.3.3 and then UNLOCK my bootloader using the information of header post of provided link
"If you aren't keeping your current device configuration (because of flashing another rom after unlocking bootloader or anything else) the simplest way to unlock is to flash stock 2.3.3 rom, root it and use the bl unlock plugin from latest flashtool"
Check attachment
Then installed it again and ran without issue
Hope that's help
Regards
Click to expand...
Click to collapse
Don't think that's the issue. I've managed to install custom kernels and roms without having to flash the file for when the bootloader is unlocked, and it's overclocked as well.
z28tovette said:
Install a cm7 rom first, follow op instructions. Configure and reboot the rom and now you have cm7 as base,now you can install any ics rom.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Your tip with CM7 was spot on. Thank you for that
I am unable to connect the phone with USB debugging mode enabled to PC. Please suggest.
Currently Using:
ROM:XPERIA S ICS CM9
Device: Xperia X10i
Panzerfaust101 said:
Your tip with CM7 was spot on. Thank you for that
Click to expand...
Click to collapse
Hi, I try to do it and get the same of "Panzerfaust101". So i back again to the stock rom 2.3.3 and have it rooted and with CWM from flastool 0.9.
Tell me "Panzerfaust101" wich link you use to get the CM7 and the instalation instrutions ?
Thanks in advance,
TMacPT
TMacPT said:
Hi, I try to do it and get the same of "Panzerfaust101". So i back again to the stock rom 2.3.3 and have it rooted and with CWM from flastool 0.9.
Tell me "Panzerfaust101" wich link you use to get the CM7 and the instalation instrutions ?
Thanks in advance,
TMacPT
Click to expand...
Click to collapse
CM7 can be found from this thread http://forum.xda-developers.com/showthread.php?t=911364. You probably need to unlock your bootloader first, though, or you won't be able to flash the custom FXP kernels
Panzerfaust101 said:
CM7 can be found from this thread http://forum.xda-developers.com/showthread.php?t=911364. You probably need to unlock your bootloader first, though, or you won't be able to flash the custom FXP kernels
Click to expand...
Click to collapse
Thanks man. I´ll try it and unlock bootloader first.
Related
My Friend's borrowing me the CSL Mi-700 Device, so I can start to development for this device, but this project will closed anytime when my friend want his device back.
Untill now I have successfully to porting the CM7 ROM to this device, but need more bug fixing, and will not release in short time.
But for now I will release my first version of FM6 variant ROM
This ROM is based from the latest Official Release by Viewsonic, I just add / remove some feature in this ROM.
Kernel feature:
Overclocked up to 864MHz
ROM feature:
Froyo 2.2.2 FRG83G
Root installed
Busybox installed
Bash installed
Gingerbread Blackout Blue installed
Percentage Battery meter installed
Doc to go removed
Touchpal removed
File manager replaced
On this ROM I'm using Clockwork recovery 2.5.1.2 from hucqim80
This is some preview of this ROM:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And this some screenshot for CM7 porting progress:
I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE BY FLASHING THIS ROM
highly recommended to charge your cell phone at least 90% to prevent failure during flashing process...
Download Link:
FM6-3310-0-5029-Andro-ID.7z
Warning:
The overclocked kernel is not compatible with the newer device that using ITE Touchscreen Hardware instead Panjit Touchscreen
but the newer device still can use this ROM with stock kernel, you can download from this link:
ITE_TS_boot.7z
For the flashing process with fastboot mode, read the second post.
Flash With SUT:
SUTL3_v1.6.5.zip
This is the latest Original Official Firmware from Viewsonic:
FM6-3310-0-5029-A02.nb0
You can see all version on Official firmware from View Sonic in this link:
vsg.viewsonic.com/ViewPad7
Credit Info
Thank you very much for:
cahyanb200 for borrowing CSL Mi-700
dsixda for your great Kitchen
hucqim80 and koush for the Recovery
mendozinas for battery percentage (UOT-Kitchen)
creator2456 for GB Blackout KB
And all people that was help me on this project..
Fastboot Mode Flashing Methode
Flashing process with fastboot mode is more easy instead using flash_image methode.
You just need fastboot and adb binary, you cen get here: View attachment 605489
But, this methode just available if you have the working system..
this is the step for flashing recovery, boot, system, etc. with fastboot:
go to command prompt and type:
Code:
[B]adb reboot bootloader[/B]
and your device will reboot to fastboot mode.
After that you can start to flashing what partition do you wan't to flash, example:
Flashing boot:
Code:
[B]fastboot flash boot boot.img[/B]
Flashing recovery:
Code:
[B]fastboot flash recovery recovery.img[/B]
Flashing system:
Code:
[B]fastboot flash system system.img[/B]
Make sure you type the right partition name and right *.img name..
Or you can use the flash_image methode in your device, you can get here:View attachment flash_image.zip
For the people that have problem with custom recovery, you can flash the original recovey with fastboot mode.
here the original recovery file:
View attachment FM6-recovery.7z
Happy Flashing...
reserved for more
How does one determine which touchscreen is in the viewpad 7?
What are the changes with 2.2.1 and 2.2.2?
mk69 said:
How does one determine which touchscreen is in the viewpad 7?
What are the changes with 2.2.1 and 2.2.2?
Click to expand...
Click to collapse
the newer device from Viewsonic that preinstalled android 2.2.2.
if your device is preinstalled 2.2 version, i think it's fine to flash with this firmware. sorry, i can post the link about changes of 2.2.2 version, i,m on phone.
Sent from my ViewPad7
tj_style said:
the newer device from Viewsonic that preinstalled android 2.2.2.
if your device is preinstalled 2.2 version, i think it's fine to flash with this firmware. sorry, i can post the link about changes of 2.2.2 version, i,m on phone.
Sent from my ViewPad7
Click to expand...
Click to collapse
Ok now I am confused. 1st post says newer devices are not working with this kernel. But you are saying viewpad 7 preloaded with 2.2.2 are the ones with newer screens... Not panjit ones, which were the viewpad 7 loaded with 2.2.1
mk69 said:
Ok now I am confused. 1st post says newer devices are not working with this kernel. But you are saying viewpad 7 preloaded with 2.2.2 are the ones with newer screens... Not panjit ones, which were the viewpad 7 loaded with 2.2.1
Click to expand...
Click to collapse
when you buy your device?
what version that you have at you buy?
2.2? 2.2.1? or 2.2.2?
Sent from my ViewPad7
tj_style said:
when you buy your device?
what version that you have at you buy?
2.2? 2.2.1? or 2.2.2?
Sent from my ViewPad7
Click to expand...
Click to collapse
Got it from costco mid april 2011, froyo 2.2.1 out of the box... Just rooted, no other mods...
mk69 said:
Got it from costco mid april 2011, froyo 2.2.1 out of the box... Just rooted, no other mods...
Click to expand...
Click to collapse
so you can use overclocked kernel, and event actually your device is using ITE touchscreen, you can use the stock kernel.
Sent from my ViewPad7
Ok will give it a try...
Great to see more roms for this..
flashing now, btw - is there any easy way to navigate in the recovery menu.. it skips two options at a time.. plus back menu enabled and disabled is very erractic - or maybe im just not using it right..
Will update on how the flash goes.. im on a olivepad.. i hope this can give me ~800 quadrant scores.. because uptil now im stuck on ~400
Using stock 2.2.2 rom
Waiting for your CM7 porting including ITE touchscreen.
tried flashing it came up with an error
what should i do next?
I also have this error. In Device Manager on the PC, is defined as a modem - is this correct? Or problem that is modified recovery? Much to ask the author to make update.zip. Thank you for your work and sorry for my english.
insanecon said:
tried flashing it came up with an error
what should i do next?
Click to expand...
Click to collapse
are you success now? or still have problem in flashing process?
sanata said:
I also have this error. In Device Manager on the PC, is defined as a modem - is this correct? Or problem that is modified recovery? Much to ask the author to make update.zip. Thank you for your work and sorry for my english.
Click to expand...
Click to collapse
try to flash with original recovery, you can get the recovery file here
flash the FM6-recovery.img on fastboot mode.
halo gan... thx bgt uda melanjutkan development ROM tablet ini... 3 rom sebelumnya yg tersedia masih ada banyak kekurangannya.. semoga ROM dri agan ini bisa jadi yang paling sempurna ^^
insanecon said:
Great to see more roms for this..
flashing now, btw - is there any easy way to navigate in the recovery menu.. it skips two options at a time.. plus back menu enabled and disabled is very erractic - or maybe im just not using it right..
Will update on how the flash goes.. im on a olivepad.. i hope this can give me ~800 quadrant scores.. because uptil now im stuck on ~400
Click to expand...
Click to collapse
Hello, i'm olivepad user too... did you still have backup of olivepad stock rom? can you upload it... ? because mine erased when i tried to making 2nd partition on my sdcard, and i forgot to backup it...
tj_style said:
are you success now? or still have problem in flashing process?
Click to expand...
Click to collapse
Nope. Could not manage to flash it. I too think it is failing because we are not on stock recovery. First time i tried to flash it, it restarted to recovery and got stuck there. After that i tried running the flashing tool when the recovery was on, and after 70% or so, it gave me this error.
Is it possible to get a update.zip for the same? Thanks!
insanecon said:
Nope. Could not manage to flash it. I too think it is failing because we are not on stock recovery. First time i tried to flash it, it restarted to recovery and got stuck there. After that i tried running the flashing tool when the recovery was on, and after 70% or so, it gave me this error.
Is it possible to get a update.zip for the same? Thanks!
Click to expand...
Click to collapse
Yup, I will made the zip version soon..
Hello,
Currently i am using NEO V on ICS Spacious,Smooth & light ROM with Custom v3 kernel by Sharul Seth, i have an unlocked bootloader.
Whenever i try to install any other ROM like MIUI or any other ICS ROM by some other developer, my phone gets stuck at SONY LOGO for more than 10 minutes and i have to again n again switch back to my old custom ROM through CMW, i don't know what is the problem so i need suggestions from you guys, that is there a problem with the ROM or something else.
BTW i follow the steps correctly as mentioned like wiping dalvik cache,partition,data etc
still the phone takes forever to boot up and i have to switch back to my old custom ROM through CMW
*I was't able to find any threads with similar problem as mine therefore i posted a new one and moderators are free to delete this if they can answer by sending me link to some other forum.
Thank you in advance
how about trying to flash a standalone kernel first and then the rom of your choice? coz sometimes the kernels that comes from roms are not very friendly towards other roms i've been using this kernel: http://forum.xda-developers.com/showthread.php?t=1521309
maybe is because the kernel that you are using is only for that custom rom, MIUI uses NE kernel or his own kernel inside zip file and aokp roms uses special aokp kernel
hi all.. first post
so i've been lurking aroma rom thread for a while, and finally pulled the trigger. this is the exact thread: http://forum.xda-developers.com/showthread.php?t=1603919
1. my phone is xperia neo, on stock GB firmware, and unlocked bootloader. so when pulling the trigger, i flashed my phone to ICS using flashtool 0.7.1.0. i got the ICS from here: http://forum.xda-developers.com/showpost.php?p=24916638&postcount=117
but after following the instructions on the flashtool software, my phone got stuck on sony logo, and then kept restarting
this is what shows up on the flashtool screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
anybody knows what the problem is? i would appreciate any kind of help. i have only done flashing step, before this accident happened. because the installation requires ICS firmware before doing any further action
2. there is a neo patch in the aroma thread, but there are no instructions for it. how do i use this patch, and when do i do it (after flashing ICS, after installing aroma rom, etc.)?
thanks in advance
1) tick "no final verification" when selecting fw in flashtool.
2) that zip needs to be flashed trough CWM recovery, after flashing the rom.
i_djoel2000 said:
hi all.. first post
so i've been lurking aroma rom thread for a while, and finally pulled the trigger. this is the exact thread: http://forum.xda-developers.com/showthread.php?t=1603919
1. my phone is xperia neo, on stock GB firmware, and unlocked bootloader. so when pulling the trigger, i flashed my phone to ICS using flashtool 0.7.1.0. i got the ICS from here: http://forum.xda-developers.com/showpost.php?p=24916638&postcount=117
but after following the instructions on the flashtool software, my phone got stuck on sony logo, and then kept restarting
this is what shows up on the flashtool screen
anybody knows what the problem is? i would appreciate any kind of help. i have only done flashing step, before this accident happened. because the installation requires ICS firmware before doing any further action
2. there is a neo patch in the aroma thread, but there are no instructions for it. how do i use this patch, and when do i do it (after flashing ICS, after installing aroma rom, etc.)?
thanks in advance
Click to expand...
Click to collapse
you have to check "No final data verification" when flashing the ICS ftf. It should look like this: http://forum.xda-developers.com/showpost.php?p=24920288&postcount=1527
Madfysh said:
1) tick "no final verification" when selecting fw in flashtool.
2) that zip needs to be flashed trough CWM recovery, after flashing the rom.
Click to expand...
Click to collapse
works like a charm.. awesome!
sorry for another noob question, but, how do i install cwm recovery? i went to the clockworkmod website, they don't have rom manager apk for xperia neo
i_djoel2000 said:
how do i install cwm recovery? i went to the clockworkmod website, they don't have rom manager apk for xperia neo
Click to expand...
Click to collapse
Check here: http://forum.xda-developers.com/showthread.php?t=1364509
and if you have any question regarding CWM, continue conversation in that(linked) thread.
And so far for other questions go to Q/A topic and then to general chat instead posting a new thread
Sent from my Neo V with Supercharged ICS with Tapatalk v2.1.1
Madfysh said:
Check here: http://forum.xda-developers.com/showthread.php?t=1364509
and if you have any question regarding CWM, continue conversation in that(linked) thread.
Click to expand...
Click to collapse
got it. thanks!
the rom works perfectly now.. only left with not installing the su binary, which was linked in that aroma thread before (under v2 how to). but i think the TS removed v2 how to, and i didn't get the chance to install the su binary yet. i don't know how it will effect my phone, but it works just fine now (don't know how will it be better with the su binary, though)
Pandemic said:
And so far for other questions go to Q/A topic and then to general chat instead posting a new thread
Sent from my Neo V with Supercharged ICS with Tapatalk v2.1.1
Click to expand...
Click to collapse
thanks for the advise..
but i didn't make this thread, i simply posted here because the problem looks similar. so i don't think i get what you mean
Vabby said:
Hello,
Currently i am using NEO V on ICS Spacious,Smooth & light ROM with Custom v3 kernel by Sharul Seth, i have an unlocked bootloader.
Whenever i try to install any other ROM like MIUI or any other ICS ROM by some other developer, my phone gets stuck at SONY LOGO for more than 10 minutes and i have to again n again switch back to my old custom ROM through CMW, i don't know what is the problem so i need suggestions from you guys, that is there a problem with the ROM or something else.
BTW i follow the steps correctly as mentioned like wiping dalvik cache,partition,data etc
Click to expand...
Click to collapse
I had a similar problem - all custom ROMs I tried got stuck at the Sony logo - see http://forum.xda-developers.com/showthread.php?t=1789441. For me, it helped to install this kernel: http://forum.xda-developers.com/showthread.php?t=1679771. Spacious,Smooth & Light now boots!
Kuhhan said:
....
Click to expand...
Click to collapse
What happened?what's the issue?
Sent from my MT11i using xda premium
ROM V20A Jelly Bean V-4.1.2, kernel v-3.4.0
To this the rooted ROM, incorporated the CWM Recovery and with the Bootloader unlocked.
If everything in a single flashing, and with the advantage of not to lose information, you will have flasheais with this ROM (your phone will be updated of ICS to JB keeping the agenda, installed applications, photos, etc)
FEATURES
- ROOT
- Recovery ClockWorkMod
- Unlocked Bootloader
- Stock ROM
Click to expand...
Click to collapse
FLASHER
That do you at your own risk, neither I nor the Forum are responsible for if your phone breaks.
Click to expand...
Click to collapse
As in format KDZ installed as an official ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Run the program KDZ_FW_UPD.exe or UPTest_EX.rar [Before running UPTest_Ex, runs Windows Enable and activate by clicking it on the icon of the two window (next to the clock)]
* For an update (Does not delete anything)
-- We connect the phone to PC mode Software LG or PC Suit
* For a clean installation (It will erase everything, factory reset)
-- Remove the battery to the L7 and while holding the key Vol+ connect the USB to the PC
Find the ROM V20A_00.rar
Finally click Launch software update
Click to expand...
Click to collapse
That's all, I hope you serve.
Thank you
- To serj to discover how to create a ROM format KDZ
- To Copsfrance by DZCreate and DZDecrypt program and aDambi by modifying it for the L7.
- Miki89 and NormanD of XDA to discover and test the CWM and the modified Bootloader.
DOWNLOAD
Extracted from todomovillg.es ROM KDZ V20A_00 ROOT
Extracted from todomovillg.es ROM KDZ V20A_00 STOCK
Click to expand...
Click to collapse
Did it on my gf's P700 (was on stock V10K) and worked flawlessly. It is now on rooted V20a.
Thanks a lot for this easy way to do that
If i have v20a beta on my phone can i use the v20a rooted or i have to downgrade to v10k?
Sent from my LG-P700 using Tapatalk 2
In theory it should not be any problem
is this firmware from 29.03 or from 24.03? :d
This is the European OPEN ROM LGP700AT-00-V20a-EUR-XX-MAR-08-2013+0
I flashed this but it was not smooth as I was hoping,so i tried to restore ICS from and NANDroid Backup.
No signal ._. Going to flash your v10k rom again.
can you please compile with firmware from 29.03?
miki89 said:
can you please compile with firmware from 29.03?
Click to expand...
Click to collapse
This is the Open Europe. Would that your comment is?
Homero2 said:
This is the Open Europe. Would that your comment is?
Click to expand...
Click to collapse
Can you make a flashable zip for this. I'm really not comfortable using the kdz flasher ever
since I experience a bootloop after flashing the v20.
vaikz said:
Can you make a flashable zip for this. I'm really not comfortable using the kdz flasher ever
since I experience a bootloop after flashing the v20.
Click to expand...
Click to collapse
I've changed the method of flashing, now it is safer and there is no Factory Reset
I have stock ROM V10K I got with phone, so im asking if I can flash V20A over it without deleting my apps and everything. I hate that ****ing V10K because it cant be rooted to restore apps with titanium backup. Hope you will respond to this.
kristijan505 said:
I have stock ROM V10K I got with phone, so im asking if I can flash V20A over it without deleting my apps and everything. I hate that ****ing V10K because it cant be rooted to restore apps with titanium backup. Hope you will respond to this.
Click to expand...
Click to collapse
Read the second post of this topic. I did exactly that and didnt lose anything. All apps were intact.
No SIM is inserted after KDZ flash
EDIT: Just waiting for ages it came back
What is the difference between the V10K and v20a? Is there a visual difference, or just the perfomance? How much free RAM memory? I downloaded rom and waiting for answer to install
goxymaster said:
What is the difference between the V10K and v20a? Is there a visual difference, or just the perfomance? How much free RAM memory? I downloaded rom and waiting for answer to install
Click to expand...
Click to collapse
oh my friend .. v10k is ics 4.0.3 but v20a is jellybean 4.1.2
there is no much difference in the in interfence because the stock rom based on LG UI .. ofcaurse there is many new features .. speed ,apps and etc.. the stock rom always take alot of ram so you'll find about 100:180 mb when no running apps ..
if you want o take an advice ..
CM10 rom with the smartass v2 kernel, v6 supercharger, kickass kernerlizer, seeder v7, 4ycl turbo engine, AC!D Sound mod and afew tweaks of pimp my rom ... you'll get another processor core
Homero2 said:
I've changed the method of flashing, now it is safer and there is no Factory Reset
Click to expand...
Click to collapse
Thanks i'll try it later.
sent from my P700 V20a, rooted and cwm 6.0.3.0
I flashed this rom with bunch of errors, but so far i got no problems with it. Also I flashed it in EMERGENCY MODE but all my settings and accounts WASN'T erased, all data is here. (??)
Gusta_HR said:
I flashed this rom with bunch of errors, but so far i got no problems with it. Also I flashed it in EMERGENCY MODE but all my settings and accounts WASN'T erased, all data is here. (??)
Click to expand...
Click to collapse
In KDZ,you left Phone Mode on DIAG. Try with EMERGENCY if your phone is in emergency mode.
Also,did you install the USB Drivers?
Handsfree not working
Only real problem I've noticed so far is that the handsfree mutes the mouthpiece otherwise good rom
Hello! I need help for the Sony Xperia Mini Pro
When i try to install a ROM CM in my SK17a with recovery 5.0.2.7 on any ROM (stock or cooked) the installation is abort and show the next mesage:
E: error in /sdcard/cm-11.0-20131128-lx-nightly-mango.zip
this package is for "sk17i,sk17a,mango" devices; this is a "anzu"
(Status 7)
I tried install on rom 2.3.3, 2.3.4 and 4.0.4 without good results
aeterno said:
Hello! I need help for the Sony Xperia Mini Pro
When i try to install a ROM CM in my SK17a with recovery 5.0.2.7 on any ROM (stock or cooked) the installation is abort and show the next mesage:
E: error in /sdcard/cm-11.0-20131128-lx-nightly-mango.zip
this package is for "sk17i,sk17a,mango" devices; this is a "anzu"
(Status 7)
I tried install on rom 2.3.3, 2.3.4 and 4.0.4 without good results
Click to expand...
Click to collapse
Looks like the verification in the update-script is written for the wrong model.
In case this issue still persists - Did you download the correct file?
Someguyfromhell said:
In case this issue still persists - Did you download the correct file?
Click to expand...
Click to collapse
If you read his post you can see the filename is mango which is the codename for the mini pro.
Is the recovery image you flashed for the mango device or the anzu device?
arkedk said:
If you read his post you can see the filename is mango which is the codename for the mini pro.
Is the recovery image you flashed for the mango device or the anzu device?
Click to expand...
Click to collapse
my phone is a SK17a.
above, I flashed rom using Flashtool to downgrade and root my SK17a, and installed 5.0.2.7 recovery.
Now, in any android version (2.3.3; 2.3.4 or 4.0.4) when I want to install by recovery, rom 11.0-cm-20131128-NIGHTLY-LX-mango.zip but that's where it shows me that error ir recovery.
As you can see, or rename my device, I do not know the route to get.
I'll take a photo of the error when it could be useful.
aeterno said:
my phone is a SK17a.
above, I flashed rom using Flashtool to downgrade and root my SK17a, and installed 5.0.2.7 recovery.
Now, in any android version (2.3.3; 2.3.4 or 4.0.4) when I want to install by recovery, rom 11.0-cm-20131128-NIGHTLY-LX-mango.zip but that's where it shows me that error ir recovery.
As you can see, or rename my device, I do not know the route to get.
I'll take a photo of the error when it could be useful.
Click to expand...
Click to collapse
To me it looks like you've flashed a custom recovery for the anzu device onto your mango device.
That's why it won't accept the mango file when you try to flash it.
You can fix the recovery.img or remove the device authentication in the zip files update-script.
I agree with arkedk. And I know that you need to use the kernel that was created by FXP for CM11. The kernel that they created for CM11 has already a CWM included. Choose the FXP kernel that was created for mango
Sent from my SK17i using XDA Premium 4 mobile app
Sorry... for delay... here I show you what my problem is...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are some photos taken of my SK17a when I try flash a rom....
Can help me?
My best bet is u didn't even flash the included kernel in the ROM zip.
The included kernel in mike's cm11 doesn't use old cwm 5.0.2.7 like in your screenshot, it uses newer cwm 6.0.x.x
Sent from your phone
an0nym0us_ said:
My best bet is u didn't even flash the included kernel in the ROM zip.
The included kernel in mike's cm11 doesn't use old cwm 5.0.2.7 like in your screenshot, it uses newer cwm 6.0.x.x
Sent from your phone
Click to expand...
Click to collapse
Can you help me with any link to download cwm 6.0.x.x for my SK17a??? i did't find it.... pleasee =)
aeterno said:
Can you help me with any link to download cwm 6.0.x.x for my SK17a??? i did't find it.... pleasee =)
Click to expand...
Click to collapse
Just use the boot.img in the rom zip of cm11. Flash it and it should work
arkedk said:
To me it looks like you've flashed a custom recovery for the anzu device onto your mango device.
That's why it won't accept the mango file when you try to flash it.
You can fix the recovery.img or remove the device authentication in the zip files update-script.
Click to expand...
Click to collapse
I uploaded some photos... thx
aeterno said:
Can you help me with any link to download cwm 6.0.x.x for my SK17a??? i did't find it.... pleasee =)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2545367
mihahn said:
Just use the boot.img in the rom zip of cm11. Flash it and it should work
Click to expand...
Click to collapse
i did't enter in fastboot mode, my sk17a have Bootloader locked... How i can flash it from recovery?
aeterno said:
i did't enter in fastboot mode, my sk17a have Bootloader locked... How i can flash it from recovery?
Click to expand...
Click to collapse
With your locked bootloader forget cm, you can't install it. Either unlock it, or install cwm using the xparts app from the playstore and flash a rom for locked bootloader
Sent from my Nexus 4 running Android 4.4
aeterno said:
i did't enter in fastboot mode, my sk17a have Bootloader locked... How i can flash it from recovery?
Click to expand...
Click to collapse
bulls eye. i thought my spider sense tinggling without particular reason.
u just can't use any aosp based rom on locked bootloader. people just doesn't read nowadays, just flashing whatever thrown at them. lol
Here you can get everything for your
CUBOT ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Be aware!!!! check your version go to settings->about phone->build number.
1.3 stay here
v0.7 or lower!
v1.5!
v0.8 turbo
I am not responsible for anything that happens to your device.
Did you also flash the wrong rom or/and recovery on your cubot one?? I'm going to show you how to get unbricked! (Goto 2.b)
1.Recovery
Installing a Recovery:
a. you have still a working rom
- use Mobileuncle Tools and press flash recovery from sdcard. (see attachment for immage)
b. rom broken
power phone down, hold power+volume down. You should get a screen with chinese lettres, don't press anything
- grab MtkDroidTools
- attach your phone
- let it be recognized (adb drivers needed)
- klick "root, backup, recovery"
- klick allready prepared files
- klick recovery and boot button
- cancel rom selection
- select your recovery file
- klick yes
- klick yes to boot in recovery
- see your phone burning
C. Use sp flash tools(advanced)
Click to expand...
Click to collapse
2.Rom
A.custom rom
Make sure you have cwm. Go ahead and install a custom rom like discribed in the other forum. Then flash boot.zip and your done
You can flash any custom rom!!!!!
B broken rom
Go up and install cwm
Flash boot.zip(see attachment)
C. Difficult way (only if the two things above fail)
I won't hold your hand how to use sp Flash tools, but I will provide you with the image. This is untested (not even by myself). I made this backup with MTK droid tools and prepared the block for sp Flash tools. Do not flash "PRELOADER" and the "DSP_BL" without any reason. (So never!!)
here's the link to the files mediafire
Click to expand...
Click to collapse
3. I Have Lost my IMEI
A. Turn your phone, pull out the battery and you could read them
B.
view other forum for other way to do it
driver
adb driver link
legal Information:
I used some of information from http://forum.xda-developers.com/showpost.php?p=44784396/URL]. I would like to thank him.
Everything i or other users present here is free for use, but everything you do with your device can possibly destroy your device.
Neither i or anybody else than you is responsible when anything goes wrong when you apply any of the provided tools, firmware, scripts, recoveries, etc.
Changing any part (Hardware or Software) of your device can cause lost of warranty.
I give no support via PN. Post your Questions here.
Click to expand...
Click to collapse
I'm not a native English speaker. If there's any spelling/wordchoice/... mistake, feel free to say it. Any improvements are always welcome. I probally won't be frequent visiting my own post so help each other.
This thread is in Beta
Don't forget to hit thanks if I helped you! :good: (right below this post on the left)
http://forum.xda-developers.com/showpost.php?p=44784396&postcount=2
revesed
reversed
Jelly bean is nice and all, but....
Does this mean there is an upgrade rom in the works for 1.3? Because that would be really really great....really.
Is there a custom rom compatibile with Cubot One Turbo v 0.8? Thanks
Sent from my CUBOT ONE using XDA Free mobile app
y2imm said:
Does this mean there is an upgrade rom in the works for 1.3? Because that would be really really great....really.
Click to expand...
Click to collapse
Yeah sure
danistuta said:
Is there a custom rom compatibile with Cubot One Turbo v 0.8? Thanks
Sent from my CUBOT ONE using XDA Free mobile app
Click to expand...
Click to collapse
Not yet but you can backup your phone with mtkdroidtools, flash recovery (generate also with mtkdroidtools), backup in cwm, flash custom rom, restore boot.img from backup , wip and reboot. Everything should be fine and in case of failure you can always revert back!!
Dave
I've got cwm 6.0.4.4 installed on my Cubot One Turbo 0.8. Is it possibile use it to flash a different rom?
Sent from my CUBOT ONE using XDA Free mobile app
danistuta said:
I've got cwm 6.0.4.4 installed on my Cubot One Turbo 0.8. Is it possibile use it to flash a different rom?
Sent from my CUBOT ONE using XDA Free mobile app
Click to expand...
Click to collapse
Yeah but it is more dificult make a cwm backup(make sure it isn't corrupt), wipe everything, install rom, restore boot.img from back-up and it should work (and you can revert back in cade of!)
Good news for everyone with a newer Cubot, who is looking for the v1.5.
Today the guys from Cubot finally replied to my emails.
This is the link for the 1.5 firmware:
http://pan.baidu.com/s/1nt5E6b3?qq-pf-to=pcqq.temporaryc2c
For me it worked out very well, I rescued my Cubot with it.
But be aware that this the latest version of the firmware, propably for the newer Cubot One.
Is there already news on any new ports for our Cubots? I tried to flash the new MIUI V5, but it doesn't work with the new Cubot One. I just see a grey screen after installing it successful. Man I would kill a OMNIROM or Cyanogenmod...
Regards
rob
So, I've enough rum and cokes to attempt something with my phone...I downloaded that 1.5, but its a rar file, I'm used to CM, how do I install a rar?...also, is there even a diff between 1.3 and 1.5.....
Cubot One with firmware v0.8 and MT6589T 1.5GHz CPU
Hi guys!
If you're having Cubot One with firmware v0.8 and MT6589T 1.5GHz CPU read my post written here!
Cheers
I have backed up the stock recovery via flashify. Would this image be of interest for you? (Cubot ONE V.1.3)
drevel123 said:
I have backed up the stock recovery via flashify. Would this image be of interest for you? (Cubot ONE V.1.3)
Click to expand...
Click to collapse
Of course so I can make better recoveries (touch & twrp).
Can you share a link to file or a private massage?
Thanks in advance
@r0b
Have you tried to restore the stock v1.5 boot.img?
Sent from my CUBOT ONE using XDA Free mobile app
y2imm said:
So, I've enough rum and cokes to attempt something with my phone...I downloaded that 1.5, but its a rar file, I'm used to CM, how do I install a rar?...also, is there even a diff between 1.3 and 1.5.....
Click to expand...
Click to collapse
there'q a diffrence!
Hi, I uploaded the backups of the recovery and the kernel to my Dropbox (because I can't attach files to my post using my smartphone).
Here is the link:
dropbox.com/s/0lff4msqxs6ak9e/Cubot%20ONE%20V1.3.zip?dl=0
Is there any Custom Rom for V1.3? Because the roms in the link you shared in your first post seem for V0.8 only?
drevel123 said:
Hi, I uploaded the backups of the recovery and the kernel to my Dropbox (because I can't attach files to my post using my smartphone).
Here is the link:
dropbox.com/s/0lff4msqxs6ak9e/Cubot%20ONE%20V1.3.zip?dl=0
Is there any Custom Rom for V1.3? Because the roms in the link you shared in your first post seem for V0.8 only?
Click to expand...
Click to collapse
yeah flash any 0.8 rom and than flash the boot.zip from the first post!
Thanks for the info! I was just a little worried, didn't want to break the phone.
y2imm said:
...I downloaded that 1.5, but its a rar file, I'm used to CM, how do I install a rar?...
Click to expand...
Click to collapse
If the ROM is in a rar file, you can flash it via SP_Flash_Tool. You have to extract the rar, then probably use the following guide.
cool
thans