Hello,
Currently i am using NEO V on ICS Spacious,Smooth & light ROM with Custom v3 kernel by Sharul Seth, i have an unlocked bootloader.
Whenever i try to install any other ROM like MIUI or any other ICS ROM by some other developer, my phone gets stuck at SONY LOGO for more than 10 minutes and i have to again n again switch back to my old custom ROM through CMW, i don't know what is the problem so i need suggestions from you guys, that is there a problem with the ROM or something else.
BTW i follow the steps correctly as mentioned like wiping dalvik cache,partition,data etc
still the phone takes forever to boot up and i have to switch back to my old custom ROM through CMW
*I was't able to find any threads with similar problem as mine therefore i posted a new one and moderators are free to delete this if they can answer by sending me link to some other forum.
Thank you in advance
how about trying to flash a standalone kernel first and then the rom of your choice? coz sometimes the kernels that comes from roms are not very friendly towards other roms i've been using this kernel: http://forum.xda-developers.com/showthread.php?t=1521309
maybe is because the kernel that you are using is only for that custom rom, MIUI uses NE kernel or his own kernel inside zip file and aokp roms uses special aokp kernel
hi all.. first post
so i've been lurking aroma rom thread for a while, and finally pulled the trigger. this is the exact thread: http://forum.xda-developers.com/showthread.php?t=1603919
1. my phone is xperia neo, on stock GB firmware, and unlocked bootloader. so when pulling the trigger, i flashed my phone to ICS using flashtool 0.7.1.0. i got the ICS from here: http://forum.xda-developers.com/showpost.php?p=24916638&postcount=117
but after following the instructions on the flashtool software, my phone got stuck on sony logo, and then kept restarting
this is what shows up on the flashtool screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
anybody knows what the problem is? i would appreciate any kind of help. i have only done flashing step, before this accident happened. because the installation requires ICS firmware before doing any further action
2. there is a neo patch in the aroma thread, but there are no instructions for it. how do i use this patch, and when do i do it (after flashing ICS, after installing aroma rom, etc.)?
thanks in advance
1) tick "no final verification" when selecting fw in flashtool.
2) that zip needs to be flashed trough CWM recovery, after flashing the rom.
i_djoel2000 said:
hi all.. first post
so i've been lurking aroma rom thread for a while, and finally pulled the trigger. this is the exact thread: http://forum.xda-developers.com/showthread.php?t=1603919
1. my phone is xperia neo, on stock GB firmware, and unlocked bootloader. so when pulling the trigger, i flashed my phone to ICS using flashtool 0.7.1.0. i got the ICS from here: http://forum.xda-developers.com/showpost.php?p=24916638&postcount=117
but after following the instructions on the flashtool software, my phone got stuck on sony logo, and then kept restarting
this is what shows up on the flashtool screen
anybody knows what the problem is? i would appreciate any kind of help. i have only done flashing step, before this accident happened. because the installation requires ICS firmware before doing any further action
2. there is a neo patch in the aroma thread, but there are no instructions for it. how do i use this patch, and when do i do it (after flashing ICS, after installing aroma rom, etc.)?
thanks in advance
Click to expand...
Click to collapse
you have to check "No final data verification" when flashing the ICS ftf. It should look like this: http://forum.xda-developers.com/showpost.php?p=24920288&postcount=1527
Madfysh said:
1) tick "no final verification" when selecting fw in flashtool.
2) that zip needs to be flashed trough CWM recovery, after flashing the rom.
Click to expand...
Click to collapse
works like a charm.. awesome!
sorry for another noob question, but, how do i install cwm recovery? i went to the clockworkmod website, they don't have rom manager apk for xperia neo
i_djoel2000 said:
how do i install cwm recovery? i went to the clockworkmod website, they don't have rom manager apk for xperia neo
Click to expand...
Click to collapse
Check here: http://forum.xda-developers.com/showthread.php?t=1364509
and if you have any question regarding CWM, continue conversation in that(linked) thread.
And so far for other questions go to Q/A topic and then to general chat instead posting a new thread
Sent from my Neo V with Supercharged ICS with Tapatalk v2.1.1
Madfysh said:
Check here: http://forum.xda-developers.com/showthread.php?t=1364509
and if you have any question regarding CWM, continue conversation in that(linked) thread.
Click to expand...
Click to collapse
got it. thanks!
the rom works perfectly now.. only left with not installing the su binary, which was linked in that aroma thread before (under v2 how to). but i think the TS removed v2 how to, and i didn't get the chance to install the su binary yet. i don't know how it will effect my phone, but it works just fine now (don't know how will it be better with the su binary, though)
Pandemic said:
And so far for other questions go to Q/A topic and then to general chat instead posting a new thread
Sent from my Neo V with Supercharged ICS with Tapatalk v2.1.1
Click to expand...
Click to collapse
thanks for the advise..
but i didn't make this thread, i simply posted here because the problem looks similar. so i don't think i get what you mean
Vabby said:
Hello,
Currently i am using NEO V on ICS Spacious,Smooth & light ROM with Custom v3 kernel by Sharul Seth, i have an unlocked bootloader.
Whenever i try to install any other ROM like MIUI or any other ICS ROM by some other developer, my phone gets stuck at SONY LOGO for more than 10 minutes and i have to again n again switch back to my old custom ROM through CMW, i don't know what is the problem so i need suggestions from you guys, that is there a problem with the ROM or something else.
BTW i follow the steps correctly as mentioned like wiping dalvik cache,partition,data etc
Click to expand...
Click to collapse
I had a similar problem - all custom ROMs I tried got stuck at the Sony logo - see http://forum.xda-developers.com/showthread.php?t=1789441. For me, it helped to install this kernel: http://forum.xda-developers.com/showthread.php?t=1679771. Spacious,Smooth & Light now boots!
Kuhhan said:
....
Click to expand...
Click to collapse
What happened?what's the issue?
Sent from my MT11i using xda premium
Related
Requeriments
StockRom 4.0.2.A.0.42 or 4.0.2.A.0.58 and CWM for bootloader lock
This rom is not necessary wipe
Download link
Neo V MT11
Code:
http://sourceforge.net/projects/seandroid/files/xperianeov/Roms/BOOTLOADERLOCK/generica/generic62.zip/download
Neo MT15 for testing
Code:
http://sourceforge.net/projects/seandroid/files/xperianeo/Roms/bootloaderlock/generic/generic62neo.zip/download
Download update .62 link
Neo V MT11
Code:
http://sourceforge.net/projects/seandroid/files/xperianeov/Kernel/Gingerbread/stockkernel/generic/update.NeoV.4.0.2.A.0.62.ftf/download
Neo MT15
Code:
http://sourceforge.net/projects/seandroid/files/xperianeo/kernel/stock.62/update.MT15i_4.0.2.A.0.62_%281246-9107%29.ftf/download
Testing by Iron in htcmania.com
Instructions:
1º Install in your device CWM for bootloader lock
Code:
http://forum.xda-developers.com/showthread.php?t=1364509
2ºDownload rom and put in your sd card
3ºInstall zip from recovery mode
4ºInstall kernel with flashtool
Thanks to:
@Iron and users htcmania.com for betates work and help with this rom
@Pandemic and users xda-developer for support in this post (My English is worst :/ )
Images by @ubuntusero (htcmania.com)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So this is pre-rooted,busybox and cwm installed .62 fw ? if yes will this work in boot loader unlocked neo v ?
thedr0idboy said:
Requeriments
StockRom and CWM for bootloader lock
This rom is not necessary wipe
Download link
Code:
http://sourceforge.net/projects/seandroid/files/xperianeov/Roms/BOOTLOADERLOCK/generica/generic62.zip/download
Testing by Iron in htcmania.com
Click to expand...
Click to collapse
Oh I hope this is what I think it saying waiting for OP or tester to confirm
Sent from my MT11i using xda premium
i want to test it. presently i'm on stock 62 firmware. not rooted, no cwm.
how to proceed. fastboot method or flashtool method?
Good Morning, people
@Thilina
Yes it´s. For bootloader unlock you can download this other rom:
Code:
http://sourceforge.net/projects/seandroid/files/xperianeov/Roms/BOOTLOADERLOCK/generica/generic62.zip/download
@ssimmmo
This rom has been tested by iron on htcmania and it is working 100% fine
@archijit
Instructions:
1º Install on your device CWM for bootloader lock
Code:
http://forum.xda-developers.com/showthread.php?t=1364509
2ºDownload the rom and put it on your sd card
3ºInstall zip from recovery mode, enjoy
This rom required a stock rom .42 or .58 for install
@archijit
Instructions:
1º Install on your device CWM for bootloader lock
Code:
http://forum.xda-developers.com/showthread.php?t=1364509
2ºDownload the rom and put it on your sd card
3ºInstall zip from recovery mode, enjoy
This rom required a stock rom .42 or .58 for install[/QUOTE]
That means i have to first downgrade to .42 ?
Thanks for the update ....
Sent from my MT11i using Tapatalk
@archijit yes because I think that is the only way for install the rom from CWM with lock bootloader.
It works perfectly.
Sent from my MT11i using Tapatalk
thedr0idboy said:
Good Morning, people
@Thilina
Yes it´s. For bootloader unlock you can download this other rom:
Code:
http://sourceforge.net/projects/seandroid/files/xperianeov/Roms/BOOTLOADERLOCK/generica/generic62.zip/download
@ssimmmo
This rom has been tested by iron on htcmania and it is working 100% fine
@archijit
Instructions:
1º Install on your device CWM for bootloader lock
Code:
http://forum.xda-developers.com/showthread.php?t=1364509
2ºDownload the rom and put it on your sd card
3ºInstall zip from recovery mode, enjoy
This rom required a stock rom .42 or .58 for install
Click to expand...
Click to collapse
Nice how can I use this with cwm without loosing my data(like sms,contacts,settings) and apps ?
eu8umhc said:
It works perfectly.
Sent from my MT11i using Tapatalk
Click to expand...
Click to collapse
did u used it on LOCKED BOOTLOADER and does it wipe all the data ie sms contacts user apps
imranaryan said:
did u used it on LOCKED BOOTLOADER and does it wipe all the data ie sms contacts user apps
Click to expand...
Click to collapse
Bootloader locked and no i didnt wipe
Sent from my Xperia Neo V
Everything fine
I installed generic 62. everything is fine. now I have rooted neo v with .62, without hampering boot loader. Thanks developers.
but one thing I doubt. is cwm included in the package? bcos I tried 2-3 times to boot in recovery by pressing the power button alongwith vol down. but not succeeded. phone booted normally. can anyone check & clear my doubt?
archijit said:
I installed generic 62. everything is fine. now I have rooted neo v with .62, without hampering boot loader. Thanks developers.
but one thing I doubt. is cwm included in the package? bcos I tried 2-3 times to boot in recovery by pressing the power button alongwith vol down. but not succeeded. phone booted normally. can anyone check & clear my doubt?
Click to expand...
Click to collapse
Yes enter by tapping the screen
Sent from my Xperia Neo V
Hi,
I forgot to mention that to enter CWM we need to click the screen several times when the first logo of Sony appears.
Regards
thanks for the post.. I am on .42 stock firmware.. Will try it today evening...
http://sourceforge.net/projects/seandroid/files/xperianeov/Roms/BOOTLOADERLOCK/
which one do we need and can we flash it over the original se rom with firmware .42 and further to do?
mine is rooted and installed cwm.
please respond mate.
i have Neo V
Edit: Done I have lock 62 rooted
Hi,
Sorry for the delay, for if it is useful to most people, we would have to download this rom and install it with a fw 42 that has CWM, or a fw 58 with CWM.
Install it as a common rom and it is not necesarry to do wipe.
Regards
thedr0idboy said:
Hi,
Sorry for the delay, for if it is useful to most people, we would have to download this rom and install it with a fw 42 that has CWM, or a fw 58 with CWM.
Install it as a common rom and it is not necesarry to do wipe.
Regards
Click to expand...
Click to collapse
no problem mate, thank you so much, it is working, 1000 tons of thanks,
i edit your in my signture and sending peeps to the right link if you doesn`t mind.
Offtopic: you come from Spain, right?
i was there for 2 weeks in 2011, in Blanes & Barca
I want to ask because I think it is celar from what I can see that with this procedure it is impossible to upgrade the kernel without having unlock bootloader.
So this mod is basically the .62 firmware but with older .42 kernel with known issues about restarts and battery drain.
Otherwise it should require flash with flashtool or unlocked bootloader right?
I'm having a bit of a problem flashing this rom (http://forum.xda-developers.com/showthread.php?t=1782771) onto my X10i. I've tried both the FXP and championswimmer kernels with the same abort message ("assert failed", then a couple of lines of text). Does anyone know the cause of this problem and/or a fix?
Installed the kernels from the very latest Flashtool (0.9.0.0), and I'm pretty sure the phone is rooted (I used to run doomkernel v6 medium overclock). Thanks in advance.
EDIT: Also, having a bit of a problem of mass storage from champswimmer's kernel. My computer seems to fail to find drivers for it whenever I connect it for mass storage and doesn't find it either. Anyone know about this as well?
Panzerfaust101 said:
I'm having a bit of a problem flashing this rom (http://forum.xda-developers.com/showthread.php?t=1782771) onto my X10i. I've tried both the FXP and championswimmer kernels with the same abort message ("assert failed", then a couple of lines of text). Does anyone know the cause of this problem and/or a fix?
Installed the kernels from the very latest Flashtool (0.9.0.0), and I'm pretty sure the phone is rooted (I used to run doomkernel v6 medium overclock). Thanks in advance.
EDIT: Also, having a bit of a problem of mass storage from champswimmer's kernel. My computer seems to fail to find drivers for it whenever I connect it for mass storage and doesn't find it either. Anyone know about this as well?
Click to expand...
Click to collapse
Install a cm7 rom first, follow op instructions. Configure and reboot the rom and now you have cm7 as base,now you can install any ics rom.
Sent from my Desire HD using xda premium
Panzerfaust101 said:
I'm having a bit of a problem flashing this rom (http://forum.xda-developers.com/showthread.php?t=1782771) onto my X10i. I've tried both the FXP and championswimmer kernels with the same abort message ("assert failed", then a couple of lines of text). Does anyone know the cause of this problem and/or a fix?
Installed the kernels from the very latest Flashtool (0.9.0.0), and I'm pretty sure the phone is rooted (I used to run doomkernel v6 medium overclock). Thanks in advance.
EDIT: Also, having a bit of a problem of mass storage from champswimmer's kernel. My computer seems to fail to find drivers for it whenever I connect it for mass storage and doesn't find it either. Anyone know about this as well?
Click to expand...
Click to collapse
Hi Panzerfaust,
I've been expecting the same issue, but then i realized that i didn't have my Bootloader UNLOCKED, so i went to this post http://forum.xda-developers.com/showthread.php?t=1254087, i downgraded back to 2.3.3 and then UNLOCK my bootloader using the information of header post of provided link
"If you aren't keeping your current device configuration (because of flashing another rom after unlocking bootloader or anything else) the simplest way to unlock is to flash stock 2.3.3 rom, root it and use the bl unlock plugin from latest flashtool"
Check attachment
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then installed it again and ran without issue
Hope that's help
Regards
vichoh said:
Hi Panzerfaust,
I've been expecting the same issue, but then i realized that i didn't have my Bootloader UNLOCKED, so i went to this post http://forum.xda-developers.com/showthread.php?t=1254087, i downgraded back to 2.3.3 and then UNLOCK my bootloader using the information of header post of provided link
"If you aren't keeping your current device configuration (because of flashing another rom after unlocking bootloader or anything else) the simplest way to unlock is to flash stock 2.3.3 rom, root it and use the bl unlock plugin from latest flashtool"
Check attachment
Then installed it again and ran without issue
Hope that's help
Regards
Click to expand...
Click to collapse
Don't think that's the issue. I've managed to install custom kernels and roms without having to flash the file for when the bootloader is unlocked, and it's overclocked as well.
z28tovette said:
Install a cm7 rom first, follow op instructions. Configure and reboot the rom and now you have cm7 as base,now you can install any ics rom.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Your tip with CM7 was spot on. Thank you for that
I am unable to connect the phone with USB debugging mode enabled to PC. Please suggest.
Currently Using:
ROM:XPERIA S ICS CM9
Device: Xperia X10i
Panzerfaust101 said:
Your tip with CM7 was spot on. Thank you for that
Click to expand...
Click to collapse
Hi, I try to do it and get the same of "Panzerfaust101". So i back again to the stock rom 2.3.3 and have it rooted and with CWM from flastool 0.9.
Tell me "Panzerfaust101" wich link you use to get the CM7 and the instalation instrutions ?
Thanks in advance,
TMacPT
TMacPT said:
Hi, I try to do it and get the same of "Panzerfaust101". So i back again to the stock rom 2.3.3 and have it rooted and with CWM from flastool 0.9.
Tell me "Panzerfaust101" wich link you use to get the CM7 and the instalation instrutions ?
Thanks in advance,
TMacPT
Click to expand...
Click to collapse
CM7 can be found from this thread http://forum.xda-developers.com/showthread.php?t=911364. You probably need to unlock your bootloader first, though, or you won't be able to flash the custom FXP kernels
Panzerfaust101 said:
CM7 can be found from this thread http://forum.xda-developers.com/showthread.php?t=911364. You probably need to unlock your bootloader first, though, or you won't be able to flash the custom FXP kernels
Click to expand...
Click to collapse
Thanks man. I´ll try it and unlock bootloader first.
Hello people of the XDA forum!
I saw many people had trouble with the connection of their sim card when they flashed cm10. In this threat i want to show you how to fix this issue.
Maybe many people already found a solution, anyway, in this topic i want to put the solution to stop people searching for it
What's the problem?So, you flashed cm10 from v20(?). now you don't have a signal am i right? so how we gonna fix that? If you follow my steps, you will be able to have a signal after this all.
Solution1. Download these files: Download
you will see this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flash this KDZ file on your L7 with these settings:
after flashing boot into recovery remove cache remove data/factory reset remove dalvik cache then flash this rom:
[ROM L7] Let´s play P.A.C-Man 19.3.0 | Jellybean 4.1.2 | BETA 2
Wipe Data/Factory Reset + System IF YOU COMING FROM ANOTHER ROM
Install Rom
Important, this must flash for correct booting Install Kernel from here: Kernel
Install Gapps
Reboot & Enjoy !
Click to expand...
Click to collapse
don't forget to flash the kernel!
And you're ready to go!
maybe there is a easyer way, but i just wanted to tell you guys this because i was searching for 3 weeks ;p
Have fun! ^^
Thanks to m4nu4l:
m4nu4l said:
Or you can flash basebands via CWM
v20 baseband for Stock v20 Roms.
v10 baseband for stock v10 roms and Custom roms which are based on v10k (To this day, every single custom rom have baseband of v10k)
You can download them from my Googlde Drive. Here's the link: https://drive.google.com/folderview?id=0B_hs4HhjiC56MDREeFNzYnpZQlE&usp=sharing
How to use them ?
Instal CM10/MIUI/AOPK/SLIMBEAM/PAC rom to you L7, then flash baseband zip, which is v10 for custom roms.
Click to expand...
Click to collapse
Credits to the maker of the rom and the kernel and the flash tool etc i do not take any credits!
And remember! : Doing this all at your own risk!
Grtz - Marvincod1
Correct me if i did something wrong please , thank you
marvincod1 said:
Hello people of the XDA forum!
I saw many people had trouble with the connection of their sim card when they flashed cm10. In this threat i want to show you how to fix this issue.
Maybe many people already found a solution, anyway, in this topic i want to put the solution to stop people searching for it
What's the problem?So, you flashed cm10 from v20(?). now you don't have a signal am i right? so how we gonna fix that? If you follow my steps, you will be able to have a signal after this all.
Solution1. Download these files: Download
you will see this:
Flash this KDZ file on your L7 with these settings:
after flashing boot into recovery remove cache remove data/factory reset remove dalvik cache then flash this rom:
[ROM L7] Let´s play P.A.C-Man 19.3.0 | Jellybean 4.1.2 | BETA 1
don't forget to flash the kernel!
And you're ready to go!
maybe there is a easyer way, but i just wanted to tell you guys this because i was searching for 3 weeks ;p
Have fun! ^^
Credits to the maker of the rom and the kernel and the flash tool etc i do not take any credits!
And remember! : Doing this all at your own risk!
Grtz - Marvincod1
Correct me if i did something wrong please , thank you
Click to expand...
Click to collapse
Or you can flash basebands via CWM
v20 baseband for Stock v20 Roms.
v10 baseband for stock v10 roms and Custom roms which are based on v10k (To this day, every single custom rom have baseband of v10k)
You can download them from my Googlde Drive. Here's the link: https://drive.google.com/folderview?id=0B_hs4HhjiC56MDREeFNzYnpZQlE&usp=sharing
How to use them ?
Instal CM10/MIUI/AOPK/SLIMBEAM/PAC rom to you L7, then flash baseband zip, which is v10 for custom roms.
m4nu4l said:
Or you can flash basebands via CWM
v20 baseband for Stock v20 Roms.
v10 baseband for stock v10 roms and Custom roms which are based on v10k (To this day, every single custom rom have baseband of v10k)
You can download them from my Googlde Drive. Here's the link: https://drive.google.com/folderview?id=0B_hs4HhjiC56MDREeFNzYnpZQlE&usp=sharing
How to use them ?
Instal CM10/MIUI/AOPK/SLIMBEAM/PAC rom to you L7, then flash baseband zip, which is v10 for custom roms.
Click to expand...
Click to collapse
That its correct. Thanx
Enviado desde mi LG-P700 usando Tapatalk 2
I'm in v20d in which order should i have to flash?
Sent from my LG-P700 using xda app-developers app
genomorro said:
I'm in v20d in which order should i have to flash?
Sent from my LG-P700 using xda app-developers app
Click to expand...
Click to collapse
reflash the v10k file, then flash cm10 trough cmw.
i almost pi**ed my pants before i saw this :S
i have just this problem
genomorro said:
I'm in v20d in which order should i have to flash?
Sent from my LG-P700 using xda app-developers app
Click to expand...
Click to collapse
If you have cwm, you can flash directly to cm10 or other aosp based roms like aokp, slim bean, etc. Flash the v10 baseband after the rom, then your good to go.
Sent from my LGP705G - PACman using Tapatalk.
my sim is detected, i have signal but i dont have newtork connection with mobile data..
i think the problem is in that v10 baseband, cuz roms with v20 basebands network is working
faters said:
my sim is detected, i have signal but i dont have newtork connection with mobile data..
i think the problem is in that v10 baseband, cuz roms with v20 basebands network is working
Click to expand...
Click to collapse
I think you need to add it manually or use SIM toolkit app to request for mobile internet and handset settings.
Sent from my LG-P700 using Tapatalk
Hello friends.
I am trying to fix my Lg Optimus L7 for 2 days now, i tried almost everything on the forum and still i cannot get my network working. Here is what i did so far:
Installed the Russian V10k via KDZ - Not working, i cannot get signal again
Installed 10 other KDZ files that should have "worked" but nothing
I flashed back v20a and i have network, then tried again to downgrade again no network
I Installed slimbean (when i am on v10k) and flash the zip v10baseband.zip - again no network
I get phone sim locked, network locked
Please help me, what should i do?
i'm sorry but i'm new to this kind of problem and i'm getting nowhere to the solution
marvincod1 said:
Hello people of the XDA forum!
I saw many people had trouble with the connection of their sim card when they flashed cm10. In this threat i want to show you how to fix this issue.
Maybe many people already found a solution, anyway, in this topic i want to put the solution to stop people searching for it
What's the problem?So, you flashed cm10 from v20(?). now you don't have a signal am i right? so how we gonna fix that? If you follow my steps, you will be able to have a signal after this all.
Solution1. Download these files: Download
you will see this:
Flash this KDZ file on your L7 with these settings:
after flashing boot into recovery remove cache remove data/factory reset remove dalvik cache then flash this rom:
[ROM L7] Let´s play P.A.C-Man 19.3.0 | Jellybean 4.1.2 | BETA 2
don't forget to flash the kernel!
And you're ready to go!
maybe there is a easyer way, but i just wanted to tell you guys this because i was searching for 3 weeks ;p
Have fun! ^^
Thanks to m4nu4l:
Credits to the maker of the rom and the kernel and the flash tool etc i do not take any credits!
And remember! : Doing this all at your own risk!
Grtz - Marvincod1
Correct me if i did something wrong please , thank you
Click to expand...
Click to collapse
but how do i boot into recovery remove cache remove data/factory reset remove dalvik cache then flash the rom and flash the kernel??
please anyone help me..i've been stuck with this problem for about a week now..i lost my phone and when i found my old l7 it was the same condition and plus no wifi and bluetooth too..
Hello! I need help for the Sony Xperia Mini Pro
When i try to install a ROM CM in my SK17a with recovery 5.0.2.7 on any ROM (stock or cooked) the installation is abort and show the next mesage:
E: error in /sdcard/cm-11.0-20131128-lx-nightly-mango.zip
this package is for "sk17i,sk17a,mango" devices; this is a "anzu"
(Status 7)
I tried install on rom 2.3.3, 2.3.4 and 4.0.4 without good results
aeterno said:
Hello! I need help for the Sony Xperia Mini Pro
When i try to install a ROM CM in my SK17a with recovery 5.0.2.7 on any ROM (stock or cooked) the installation is abort and show the next mesage:
E: error in /sdcard/cm-11.0-20131128-lx-nightly-mango.zip
this package is for "sk17i,sk17a,mango" devices; this is a "anzu"
(Status 7)
I tried install on rom 2.3.3, 2.3.4 and 4.0.4 without good results
Click to expand...
Click to collapse
Looks like the verification in the update-script is written for the wrong model.
In case this issue still persists - Did you download the correct file?
Someguyfromhell said:
In case this issue still persists - Did you download the correct file?
Click to expand...
Click to collapse
If you read his post you can see the filename is mango which is the codename for the mini pro.
Is the recovery image you flashed for the mango device or the anzu device?
arkedk said:
If you read his post you can see the filename is mango which is the codename for the mini pro.
Is the recovery image you flashed for the mango device or the anzu device?
Click to expand...
Click to collapse
my phone is a SK17a.
above, I flashed rom using Flashtool to downgrade and root my SK17a, and installed 5.0.2.7 recovery.
Now, in any android version (2.3.3; 2.3.4 or 4.0.4) when I want to install by recovery, rom 11.0-cm-20131128-NIGHTLY-LX-mango.zip but that's where it shows me that error ir recovery.
As you can see, or rename my device, I do not know the route to get.
I'll take a photo of the error when it could be useful.
aeterno said:
my phone is a SK17a.
above, I flashed rom using Flashtool to downgrade and root my SK17a, and installed 5.0.2.7 recovery.
Now, in any android version (2.3.3; 2.3.4 or 4.0.4) when I want to install by recovery, rom 11.0-cm-20131128-NIGHTLY-LX-mango.zip but that's where it shows me that error ir recovery.
As you can see, or rename my device, I do not know the route to get.
I'll take a photo of the error when it could be useful.
Click to expand...
Click to collapse
To me it looks like you've flashed a custom recovery for the anzu device onto your mango device.
That's why it won't accept the mango file when you try to flash it.
You can fix the recovery.img or remove the device authentication in the zip files update-script.
I agree with arkedk. And I know that you need to use the kernel that was created by FXP for CM11. The kernel that they created for CM11 has already a CWM included. Choose the FXP kernel that was created for mango
Sent from my SK17i using XDA Premium 4 mobile app
Sorry... for delay... here I show you what my problem is...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are some photos taken of my SK17a when I try flash a rom....
Can help me?
My best bet is u didn't even flash the included kernel in the ROM zip.
The included kernel in mike's cm11 doesn't use old cwm 5.0.2.7 like in your screenshot, it uses newer cwm 6.0.x.x
Sent from your phone
an0nym0us_ said:
My best bet is u didn't even flash the included kernel in the ROM zip.
The included kernel in mike's cm11 doesn't use old cwm 5.0.2.7 like in your screenshot, it uses newer cwm 6.0.x.x
Sent from your phone
Click to expand...
Click to collapse
Can you help me with any link to download cwm 6.0.x.x for my SK17a??? i did't find it.... pleasee =)
aeterno said:
Can you help me with any link to download cwm 6.0.x.x for my SK17a??? i did't find it.... pleasee =)
Click to expand...
Click to collapse
Just use the boot.img in the rom zip of cm11. Flash it and it should work
arkedk said:
To me it looks like you've flashed a custom recovery for the anzu device onto your mango device.
That's why it won't accept the mango file when you try to flash it.
You can fix the recovery.img or remove the device authentication in the zip files update-script.
Click to expand...
Click to collapse
I uploaded some photos... thx
aeterno said:
Can you help me with any link to download cwm 6.0.x.x for my SK17a??? i did't find it.... pleasee =)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2545367
mihahn said:
Just use the boot.img in the rom zip of cm11. Flash it and it should work
Click to expand...
Click to collapse
i did't enter in fastboot mode, my sk17a have Bootloader locked... How i can flash it from recovery?
aeterno said:
i did't enter in fastboot mode, my sk17a have Bootloader locked... How i can flash it from recovery?
Click to expand...
Click to collapse
With your locked bootloader forget cm, you can't install it. Either unlock it, or install cwm using the xparts app from the playstore and flash a rom for locked bootloader
Sent from my Nexus 4 running Android 4.4
aeterno said:
i did't enter in fastboot mode, my sk17a have Bootloader locked... How i can flash it from recovery?
Click to expand...
Click to collapse
bulls eye. i thought my spider sense tinggling without particular reason.
u just can't use any aosp based rom on locked bootloader. people just doesn't read nowadays, just flashing whatever thrown at them. lol
Hi Everyone,I Have Deodexed & Zipaligned Z3's 4.4.4 23.0.A.2.105 Firmware
This Was Meant For The Single Sim Of Xperia™ Z3 With The Model Number D6603 Or D6653
Requirements
Unlocked Bootloader Currently
Rooted
CWM Recovery
After The Root Will Work On Locked Bootloader,You Can Also Flash This On Your Z3 With Locked Bootloader
You Will Need To Have A Rooted ROM With CWM Recovery
You Must Be On This Firmware (.105) To Flash It
Please Note That The Zip Only Contained System App,Framework & Priv-App
It Was Recommended To Flash This Zip On A Generic Firmware That Doesn't Contain Carrier Apps
The Odex File Will Be Deleted During The Installation & The Carrier App May Not Work Properly Because This Is Based On Generic Firmware
Installation:
1.Download The Zip & Move It To Your Phone
2.Boot Into CWM Recovery & Flash It
3.Clear Cache & Dalvik Cache
4.Done
Download:
Deodexed & Zipaligned 4.4.4 23.0.A.2.93 Firmware ( 520.3 MB )
Deodexed & Zipaligned 4.4.4 23.0.A.2.105 Firmware ( 524.8 MB )
Credits:
laguCool
RyokoN
Hit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I Helped You
@Ben Ling
would it be better if u could state which customization version u have de-odex from?
chunlianghere said:
@Ben Ling
would it be better if u could state which customization version u have de-odex from?
Click to expand...
Click to collapse
Generic UK
Btw there's is no any carrier apps in the zip & all Generic ROM have the same apk & jar files
It may be worthwhile to put that in the requirements it does not need an unlocked bootloader, only root and recovery. I know currently you cannot have either of these without an unlocked bootloader, but soon (Finger crossed) we will get root without having to unlock.
Greg
gregbradley said:
It may be worthwhile to put that in the requirements it does not need an unlocked bootloader, only root and recovery. I know currently you cannot have either of these without an unlocked bootloader, but soon (Finger crossed) we will get root without having to unlock.
Greg
Click to expand...
Click to collapse
yep I knew that but for now there is no way to root it on locked bootloader...
can you please get one for D6633
. .
Is it compatible with single SIM D6643 variant?!
Fatadxb said:
can you please get one for D6633
Click to expand...
Click to collapse
+1.
^^ a great opportunity to learn!! in the cross dev sony thread there is tool and instructions to convert ftf into deodexed flashable (I don't code but created these for Z Ultra) Ill go find the threads and post and you can easily make your own (ro save @Ben Ling doing exact same thing)
http://forum.xda-developers.com/showthread.php?t=2713329
[TOOL] Kamome tool for Windows - deodex tool for 4.4 KitKat
edit: sry, cannot find ftf conversion thread ~ from memory; unzip ftf, unpack system (the tricky bit, needs software), then kanome tool ~ will have to find proper instructions as this helps nobody lol
Sent from my D6653 using Tapatalk
Can this be installed with the TWRP recovery? Or do I need to have CWM recovery?
Im gonna open my bootlader and I am unsure on witch of the rooting alternatives I should use. Im used to TWRP from other phones, but I have also used CWM sometimes, aaaaaaah the choiches
Dirtyzecret said:
Can this be installed with the TWRP recovery? Or do I need to have CWM recovery?
Im gonna open my bootlader and I am unsure on witch of the rooting alternatives I should use. Im used to TWRP from other phones, but I have also used CWM sometimes, aaaaaaah the choiches
Click to expand...
Click to collapse
You can use the one you like
^^ if you use DoomLord cwm boot for root then flash AndroPlus kernel afterwards you actually end up with both cwm AND twrp (ftw)
Updated to .105
Hi,
I need help !! I own a D6603 Z3 model (with global generic firmware .93).
I unlocked the bootloader, then flash C.W.M recovery, then i flash this .105 de-odexed firmware, wipe cache and dalvik cache and finally, rebooting the phone.
But instead of the set up screen, i have a black screen with a blue line who shows up every 2 seconds at the bottom of the screen and i can't do anything !!
What am i missing ? I precise that i'm not a noob for flashing xperias phone.
P.S : I didn't make a backup before flashing cause i forgot, and flashtool doesn't works for Z3 yet so i can't flash any FTF Files.... :-/
flashtool works fine
gregou said:
Hi,
I need help !! I own a D6603 Z3 model (with global generic firmware .93).
I unlocked the bootloader, then flash C.W.M recovery, then i flash this .105 de-odexed firmware, wipe cache and dalvik cache and finally, rebooting the phone.
But instead of the set up screen, i have a black screen with a blue line who shows up every 2 seconds at the bottom of the screen and i can't do anything !!
What am i missing ? I precise that i'm not a noob for flashing xperias phone.
P.S : I didn't make a backup before flashing cause i forgot, and flashtool doesn't works for Z3 yet so i can't flash any FTF Files.... :-/
Click to expand...
Click to collapse
I guess you are not on .105 firmware to flash this.
I forgot to edit the OP as I just updated to .105 build,so there wrote that you must be on .93 firmware.
Actually you will need to be on the same firmware to flash it in case anything goes wrong.
For now you can only reflash firmware using flashtool.
Ben Ling said:
I guess you are not on .105 firmware to flash this.
I forgot to edit the OP as I just updated to .105 build,so there wrote that you must be on .93 firmware.
Actually you will need to be on the same firmware to flash it in case anything goes wrong.
For now you can only reflash firmware using flashtool.
Click to expand...
Click to collapse
Thanks a lot for your replies, i dowloaded the latest version of flashtool as i had an old version and i managed to get back to stock.
I unlocked again, rooted and that's good for me now, even if i'm still odexed.
Just hoping now that some devs will bring us some custom rom cause it's quite sad to own this amazing phone and have no custom rom to play with...
Thanks anyway for your work on this de-odexed rom !
totally agree
and stock is a blown up piece of ****
Alex3oe said:
totally agree
and stock is a blown up piece of ****
Click to expand...
Click to collapse
I'd rather be on Sony's stock firmware (which i like by the way) than Touchwizz rom !! But i like custom rom as i can modify whatever i want Also, something great would be to get some mods for camera (higher bitrate video for example) and mods for audio... Fingers crossed !