Hello people of the XDA forum!
I saw many people had trouble with the connection of their sim card when they flashed cm10. In this threat i want to show you how to fix this issue.
Maybe many people already found a solution, anyway, in this topic i want to put the solution to stop people searching for it
What's the problem?So, you flashed cm10 from v20(?). now you don't have a signal am i right? so how we gonna fix that? If you follow my steps, you will be able to have a signal after this all.
Solution1. Download these files: Download
you will see this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flash this KDZ file on your L7 with these settings:
after flashing boot into recovery remove cache remove data/factory reset remove dalvik cache then flash this rom:
[ROM L7] Let´s play P.A.C-Man 19.3.0 | Jellybean 4.1.2 | BETA 2
Wipe Data/Factory Reset + System IF YOU COMING FROM ANOTHER ROM
Install Rom
Important, this must flash for correct booting Install Kernel from here: Kernel
Install Gapps
Reboot & Enjoy !
Click to expand...
Click to collapse
don't forget to flash the kernel!
And you're ready to go!
maybe there is a easyer way, but i just wanted to tell you guys this because i was searching for 3 weeks ;p
Have fun! ^^
Thanks to m4nu4l:
m4nu4l said:
Or you can flash basebands via CWM
v20 baseband for Stock v20 Roms.
v10 baseband for stock v10 roms and Custom roms which are based on v10k (To this day, every single custom rom have baseband of v10k)
You can download them from my Googlde Drive. Here's the link: https://drive.google.com/folderview?id=0B_hs4HhjiC56MDREeFNzYnpZQlE&usp=sharing
How to use them ?
Instal CM10/MIUI/AOPK/SLIMBEAM/PAC rom to you L7, then flash baseband zip, which is v10 for custom roms.
Click to expand...
Click to collapse
Credits to the maker of the rom and the kernel and the flash tool etc i do not take any credits!
And remember! : Doing this all at your own risk!
Grtz - Marvincod1
Correct me if i did something wrong please , thank you
marvincod1 said:
Hello people of the XDA forum!
I saw many people had trouble with the connection of their sim card when they flashed cm10. In this threat i want to show you how to fix this issue.
Maybe many people already found a solution, anyway, in this topic i want to put the solution to stop people searching for it
What's the problem?So, you flashed cm10 from v20(?). now you don't have a signal am i right? so how we gonna fix that? If you follow my steps, you will be able to have a signal after this all.
Solution1. Download these files: Download
you will see this:
Flash this KDZ file on your L7 with these settings:
after flashing boot into recovery remove cache remove data/factory reset remove dalvik cache then flash this rom:
[ROM L7] Let´s play P.A.C-Man 19.3.0 | Jellybean 4.1.2 | BETA 1
don't forget to flash the kernel!
And you're ready to go!
maybe there is a easyer way, but i just wanted to tell you guys this because i was searching for 3 weeks ;p
Have fun! ^^
Credits to the maker of the rom and the kernel and the flash tool etc i do not take any credits!
And remember! : Doing this all at your own risk!
Grtz - Marvincod1
Correct me if i did something wrong please , thank you
Click to expand...
Click to collapse
Or you can flash basebands via CWM
v20 baseband for Stock v20 Roms.
v10 baseband for stock v10 roms and Custom roms which are based on v10k (To this day, every single custom rom have baseband of v10k)
You can download them from my Googlde Drive. Here's the link: https://drive.google.com/folderview?id=0B_hs4HhjiC56MDREeFNzYnpZQlE&usp=sharing
How to use them ?
Instal CM10/MIUI/AOPK/SLIMBEAM/PAC rom to you L7, then flash baseband zip, which is v10 for custom roms.
m4nu4l said:
Or you can flash basebands via CWM
v20 baseband for Stock v20 Roms.
v10 baseband for stock v10 roms and Custom roms which are based on v10k (To this day, every single custom rom have baseband of v10k)
You can download them from my Googlde Drive. Here's the link: https://drive.google.com/folderview?id=0B_hs4HhjiC56MDREeFNzYnpZQlE&usp=sharing
How to use them ?
Instal CM10/MIUI/AOPK/SLIMBEAM/PAC rom to you L7, then flash baseband zip, which is v10 for custom roms.
Click to expand...
Click to collapse
That its correct. Thanx
Enviado desde mi LG-P700 usando Tapatalk 2
I'm in v20d in which order should i have to flash?
Sent from my LG-P700 using xda app-developers app
genomorro said:
I'm in v20d in which order should i have to flash?
Sent from my LG-P700 using xda app-developers app
Click to expand...
Click to collapse
reflash the v10k file, then flash cm10 trough cmw.
i almost pi**ed my pants before i saw this :S
i have just this problem
genomorro said:
I'm in v20d in which order should i have to flash?
Sent from my LG-P700 using xda app-developers app
Click to expand...
Click to collapse
If you have cwm, you can flash directly to cm10 or other aosp based roms like aokp, slim bean, etc. Flash the v10 baseband after the rom, then your good to go.
Sent from my LGP705G - PACman using Tapatalk.
my sim is detected, i have signal but i dont have newtork connection with mobile data..
i think the problem is in that v10 baseband, cuz roms with v20 basebands network is working
faters said:
my sim is detected, i have signal but i dont have newtork connection with mobile data..
i think the problem is in that v10 baseband, cuz roms with v20 basebands network is working
Click to expand...
Click to collapse
I think you need to add it manually or use SIM toolkit app to request for mobile internet and handset settings.
Sent from my LG-P700 using Tapatalk
Hello friends.
I am trying to fix my Lg Optimus L7 for 2 days now, i tried almost everything on the forum and still i cannot get my network working. Here is what i did so far:
Installed the Russian V10k via KDZ - Not working, i cannot get signal again
Installed 10 other KDZ files that should have "worked" but nothing
I flashed back v20a and i have network, then tried again to downgrade again no network
I Installed slimbean (when i am on v10k) and flash the zip v10baseband.zip - again no network
I get phone sim locked, network locked
Please help me, what should i do?
i'm sorry but i'm new to this kind of problem and i'm getting nowhere to the solution
marvincod1 said:
Hello people of the XDA forum!
I saw many people had trouble with the connection of their sim card when they flashed cm10. In this threat i want to show you how to fix this issue.
Maybe many people already found a solution, anyway, in this topic i want to put the solution to stop people searching for it
What's the problem?So, you flashed cm10 from v20(?). now you don't have a signal am i right? so how we gonna fix that? If you follow my steps, you will be able to have a signal after this all.
Solution1. Download these files: Download
you will see this:
Flash this KDZ file on your L7 with these settings:
after flashing boot into recovery remove cache remove data/factory reset remove dalvik cache then flash this rom:
[ROM L7] Let´s play P.A.C-Man 19.3.0 | Jellybean 4.1.2 | BETA 2
don't forget to flash the kernel!
And you're ready to go!
maybe there is a easyer way, but i just wanted to tell you guys this because i was searching for 3 weeks ;p
Have fun! ^^
Thanks to m4nu4l:
Credits to the maker of the rom and the kernel and the flash tool etc i do not take any credits!
And remember! : Doing this all at your own risk!
Grtz - Marvincod1
Correct me if i did something wrong please , thank you
Click to expand...
Click to collapse
but how do i boot into recovery remove cache remove data/factory reset remove dalvik cache then flash the rom and flash the kernel??
please anyone help me..i've been stuck with this problem for about a week now..i lost my phone and when i found my old l7 it was the same condition and plus no wifi and bluetooth too..
Related
Hello,
Currently i am using NEO V on ICS Spacious,Smooth & light ROM with Custom v3 kernel by Sharul Seth, i have an unlocked bootloader.
Whenever i try to install any other ROM like MIUI or any other ICS ROM by some other developer, my phone gets stuck at SONY LOGO for more than 10 minutes and i have to again n again switch back to my old custom ROM through CMW, i don't know what is the problem so i need suggestions from you guys, that is there a problem with the ROM or something else.
BTW i follow the steps correctly as mentioned like wiping dalvik cache,partition,data etc
still the phone takes forever to boot up and i have to switch back to my old custom ROM through CMW
*I was't able to find any threads with similar problem as mine therefore i posted a new one and moderators are free to delete this if they can answer by sending me link to some other forum.
Thank you in advance
how about trying to flash a standalone kernel first and then the rom of your choice? coz sometimes the kernels that comes from roms are not very friendly towards other roms i've been using this kernel: http://forum.xda-developers.com/showthread.php?t=1521309
maybe is because the kernel that you are using is only for that custom rom, MIUI uses NE kernel or his own kernel inside zip file and aokp roms uses special aokp kernel
hi all.. first post
so i've been lurking aroma rom thread for a while, and finally pulled the trigger. this is the exact thread: http://forum.xda-developers.com/showthread.php?t=1603919
1. my phone is xperia neo, on stock GB firmware, and unlocked bootloader. so when pulling the trigger, i flashed my phone to ICS using flashtool 0.7.1.0. i got the ICS from here: http://forum.xda-developers.com/showpost.php?p=24916638&postcount=117
but after following the instructions on the flashtool software, my phone got stuck on sony logo, and then kept restarting
this is what shows up on the flashtool screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
anybody knows what the problem is? i would appreciate any kind of help. i have only done flashing step, before this accident happened. because the installation requires ICS firmware before doing any further action
2. there is a neo patch in the aroma thread, but there are no instructions for it. how do i use this patch, and when do i do it (after flashing ICS, after installing aroma rom, etc.)?
thanks in advance
1) tick "no final verification" when selecting fw in flashtool.
2) that zip needs to be flashed trough CWM recovery, after flashing the rom.
i_djoel2000 said:
hi all.. first post
so i've been lurking aroma rom thread for a while, and finally pulled the trigger. this is the exact thread: http://forum.xda-developers.com/showthread.php?t=1603919
1. my phone is xperia neo, on stock GB firmware, and unlocked bootloader. so when pulling the trigger, i flashed my phone to ICS using flashtool 0.7.1.0. i got the ICS from here: http://forum.xda-developers.com/showpost.php?p=24916638&postcount=117
but after following the instructions on the flashtool software, my phone got stuck on sony logo, and then kept restarting
this is what shows up on the flashtool screen
anybody knows what the problem is? i would appreciate any kind of help. i have only done flashing step, before this accident happened. because the installation requires ICS firmware before doing any further action
2. there is a neo patch in the aroma thread, but there are no instructions for it. how do i use this patch, and when do i do it (after flashing ICS, after installing aroma rom, etc.)?
thanks in advance
Click to expand...
Click to collapse
you have to check "No final data verification" when flashing the ICS ftf. It should look like this: http://forum.xda-developers.com/showpost.php?p=24920288&postcount=1527
Madfysh said:
1) tick "no final verification" when selecting fw in flashtool.
2) that zip needs to be flashed trough CWM recovery, after flashing the rom.
Click to expand...
Click to collapse
works like a charm.. awesome!
sorry for another noob question, but, how do i install cwm recovery? i went to the clockworkmod website, they don't have rom manager apk for xperia neo
i_djoel2000 said:
how do i install cwm recovery? i went to the clockworkmod website, they don't have rom manager apk for xperia neo
Click to expand...
Click to collapse
Check here: http://forum.xda-developers.com/showthread.php?t=1364509
and if you have any question regarding CWM, continue conversation in that(linked) thread.
And so far for other questions go to Q/A topic and then to general chat instead posting a new thread
Sent from my Neo V with Supercharged ICS with Tapatalk v2.1.1
Madfysh said:
Check here: http://forum.xda-developers.com/showthread.php?t=1364509
and if you have any question regarding CWM, continue conversation in that(linked) thread.
Click to expand...
Click to collapse
got it. thanks!
the rom works perfectly now.. only left with not installing the su binary, which was linked in that aroma thread before (under v2 how to). but i think the TS removed v2 how to, and i didn't get the chance to install the su binary yet. i don't know how it will effect my phone, but it works just fine now (don't know how will it be better with the su binary, though)
Pandemic said:
And so far for other questions go to Q/A topic and then to general chat instead posting a new thread
Sent from my Neo V with Supercharged ICS with Tapatalk v2.1.1
Click to expand...
Click to collapse
thanks for the advise..
but i didn't make this thread, i simply posted here because the problem looks similar. so i don't think i get what you mean
Vabby said:
Hello,
Currently i am using NEO V on ICS Spacious,Smooth & light ROM with Custom v3 kernel by Sharul Seth, i have an unlocked bootloader.
Whenever i try to install any other ROM like MIUI or any other ICS ROM by some other developer, my phone gets stuck at SONY LOGO for more than 10 minutes and i have to again n again switch back to my old custom ROM through CMW, i don't know what is the problem so i need suggestions from you guys, that is there a problem with the ROM or something else.
BTW i follow the steps correctly as mentioned like wiping dalvik cache,partition,data etc
Click to expand...
Click to collapse
I had a similar problem - all custom ROMs I tried got stuck at the Sony logo - see http://forum.xda-developers.com/showthread.php?t=1789441. For me, it helped to install this kernel: http://forum.xda-developers.com/showthread.php?t=1679771. Spacious,Smooth & Light now boots!
Kuhhan said:
....
Click to expand...
Click to collapse
What happened?what's the issue?
Sent from my MT11i using xda premium
ROM V20A Jelly Bean V-4.1.2, kernel v-3.4.0
To this the rooted ROM, incorporated the CWM Recovery and with the Bootloader unlocked.
If everything in a single flashing, and with the advantage of not to lose information, you will have flasheais with this ROM (your phone will be updated of ICS to JB keeping the agenda, installed applications, photos, etc)
FEATURES
- ROOT
- Recovery ClockWorkMod
- Unlocked Bootloader
- Stock ROM
Click to expand...
Click to collapse
FLASHER
That do you at your own risk, neither I nor the Forum are responsible for if your phone breaks.
Click to expand...
Click to collapse
As in format KDZ installed as an official ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Run the program KDZ_FW_UPD.exe or UPTest_EX.rar [Before running UPTest_Ex, runs Windows Enable and activate by clicking it on the icon of the two window (next to the clock)]
* For an update (Does not delete anything)
-- We connect the phone to PC mode Software LG or PC Suit
* For a clean installation (It will erase everything, factory reset)
-- Remove the battery to the L7 and while holding the key Vol+ connect the USB to the PC
Find the ROM V20A_00.rar
Finally click Launch software update
Click to expand...
Click to collapse
That's all, I hope you serve.
Thank you
- To serj to discover how to create a ROM format KDZ
- To Copsfrance by DZCreate and DZDecrypt program and aDambi by modifying it for the L7.
- Miki89 and NormanD of XDA to discover and test the CWM and the modified Bootloader.
DOWNLOAD
Extracted from todomovillg.es ROM KDZ V20A_00 ROOT
Extracted from todomovillg.es ROM KDZ V20A_00 STOCK
Click to expand...
Click to collapse
Did it on my gf's P700 (was on stock V10K) and worked flawlessly. It is now on rooted V20a.
Thanks a lot for this easy way to do that
If i have v20a beta on my phone can i use the v20a rooted or i have to downgrade to v10k?
Sent from my LG-P700 using Tapatalk 2
In theory it should not be any problem
is this firmware from 29.03 or from 24.03? :d
This is the European OPEN ROM LGP700AT-00-V20a-EUR-XX-MAR-08-2013+0
I flashed this but it was not smooth as I was hoping,so i tried to restore ICS from and NANDroid Backup.
No signal ._. Going to flash your v10k rom again.
can you please compile with firmware from 29.03?
miki89 said:
can you please compile with firmware from 29.03?
Click to expand...
Click to collapse
This is the Open Europe. Would that your comment is?
Homero2 said:
This is the Open Europe. Would that your comment is?
Click to expand...
Click to collapse
Can you make a flashable zip for this. I'm really not comfortable using the kdz flasher ever
since I experience a bootloop after flashing the v20.
vaikz said:
Can you make a flashable zip for this. I'm really not comfortable using the kdz flasher ever
since I experience a bootloop after flashing the v20.
Click to expand...
Click to collapse
I've changed the method of flashing, now it is safer and there is no Factory Reset
I have stock ROM V10K I got with phone, so im asking if I can flash V20A over it without deleting my apps and everything. I hate that ****ing V10K because it cant be rooted to restore apps with titanium backup. Hope you will respond to this.
kristijan505 said:
I have stock ROM V10K I got with phone, so im asking if I can flash V20A over it without deleting my apps and everything. I hate that ****ing V10K because it cant be rooted to restore apps with titanium backup. Hope you will respond to this.
Click to expand...
Click to collapse
Read the second post of this topic. I did exactly that and didnt lose anything. All apps were intact.
No SIM is inserted after KDZ flash
EDIT: Just waiting for ages it came back
What is the difference between the V10K and v20a? Is there a visual difference, or just the perfomance? How much free RAM memory? I downloaded rom and waiting for answer to install
goxymaster said:
What is the difference between the V10K and v20a? Is there a visual difference, or just the perfomance? How much free RAM memory? I downloaded rom and waiting for answer to install
Click to expand...
Click to collapse
oh my friend .. v10k is ics 4.0.3 but v20a is jellybean 4.1.2
there is no much difference in the in interfence because the stock rom based on LG UI .. ofcaurse there is many new features .. speed ,apps and etc.. the stock rom always take alot of ram so you'll find about 100:180 mb when no running apps ..
if you want o take an advice ..
CM10 rom with the smartass v2 kernel, v6 supercharger, kickass kernerlizer, seeder v7, 4ycl turbo engine, AC!D Sound mod and afew tweaks of pimp my rom ... you'll get another processor core
Homero2 said:
I've changed the method of flashing, now it is safer and there is no Factory Reset
Click to expand...
Click to collapse
Thanks i'll try it later.
sent from my P700 V20a, rooted and cwm 6.0.3.0
I flashed this rom with bunch of errors, but so far i got no problems with it. Also I flashed it in EMERGENCY MODE but all my settings and accounts WASN'T erased, all data is here. (??)
Gusta_HR said:
I flashed this rom with bunch of errors, but so far i got no problems with it. Also I flashed it in EMERGENCY MODE but all my settings and accounts WASN'T erased, all data is here. (??)
Click to expand...
Click to collapse
In KDZ,you left Phone Mode on DIAG. Try with EMERGENCY if your phone is in emergency mode.
Also,did you install the USB Drivers?
Handsfree not working
Only real problem I've noticed so far is that the handsfree mutes the mouthpiece otherwise good rom
Hello! I need help for the Sony Xperia Mini Pro
When i try to install a ROM CM in my SK17a with recovery 5.0.2.7 on any ROM (stock or cooked) the installation is abort and show the next mesage:
E: error in /sdcard/cm-11.0-20131128-lx-nightly-mango.zip
this package is for "sk17i,sk17a,mango" devices; this is a "anzu"
(Status 7)
I tried install on rom 2.3.3, 2.3.4 and 4.0.4 without good results
aeterno said:
Hello! I need help for the Sony Xperia Mini Pro
When i try to install a ROM CM in my SK17a with recovery 5.0.2.7 on any ROM (stock or cooked) the installation is abort and show the next mesage:
E: error in /sdcard/cm-11.0-20131128-lx-nightly-mango.zip
this package is for "sk17i,sk17a,mango" devices; this is a "anzu"
(Status 7)
I tried install on rom 2.3.3, 2.3.4 and 4.0.4 without good results
Click to expand...
Click to collapse
Looks like the verification in the update-script is written for the wrong model.
In case this issue still persists - Did you download the correct file?
Someguyfromhell said:
In case this issue still persists - Did you download the correct file?
Click to expand...
Click to collapse
If you read his post you can see the filename is mango which is the codename for the mini pro.
Is the recovery image you flashed for the mango device or the anzu device?
arkedk said:
If you read his post you can see the filename is mango which is the codename for the mini pro.
Is the recovery image you flashed for the mango device or the anzu device?
Click to expand...
Click to collapse
my phone is a SK17a.
above, I flashed rom using Flashtool to downgrade and root my SK17a, and installed 5.0.2.7 recovery.
Now, in any android version (2.3.3; 2.3.4 or 4.0.4) when I want to install by recovery, rom 11.0-cm-20131128-NIGHTLY-LX-mango.zip but that's where it shows me that error ir recovery.
As you can see, or rename my device, I do not know the route to get.
I'll take a photo of the error when it could be useful.
aeterno said:
my phone is a SK17a.
above, I flashed rom using Flashtool to downgrade and root my SK17a, and installed 5.0.2.7 recovery.
Now, in any android version (2.3.3; 2.3.4 or 4.0.4) when I want to install by recovery, rom 11.0-cm-20131128-NIGHTLY-LX-mango.zip but that's where it shows me that error ir recovery.
As you can see, or rename my device, I do not know the route to get.
I'll take a photo of the error when it could be useful.
Click to expand...
Click to collapse
To me it looks like you've flashed a custom recovery for the anzu device onto your mango device.
That's why it won't accept the mango file when you try to flash it.
You can fix the recovery.img or remove the device authentication in the zip files update-script.
I agree with arkedk. And I know that you need to use the kernel that was created by FXP for CM11. The kernel that they created for CM11 has already a CWM included. Choose the FXP kernel that was created for mango
Sent from my SK17i using XDA Premium 4 mobile app
Sorry... for delay... here I show you what my problem is...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are some photos taken of my SK17a when I try flash a rom....
Can help me?
My best bet is u didn't even flash the included kernel in the ROM zip.
The included kernel in mike's cm11 doesn't use old cwm 5.0.2.7 like in your screenshot, it uses newer cwm 6.0.x.x
Sent from your phone
an0nym0us_ said:
My best bet is u didn't even flash the included kernel in the ROM zip.
The included kernel in mike's cm11 doesn't use old cwm 5.0.2.7 like in your screenshot, it uses newer cwm 6.0.x.x
Sent from your phone
Click to expand...
Click to collapse
Can you help me with any link to download cwm 6.0.x.x for my SK17a??? i did't find it.... pleasee =)
aeterno said:
Can you help me with any link to download cwm 6.0.x.x for my SK17a??? i did't find it.... pleasee =)
Click to expand...
Click to collapse
Just use the boot.img in the rom zip of cm11. Flash it and it should work
arkedk said:
To me it looks like you've flashed a custom recovery for the anzu device onto your mango device.
That's why it won't accept the mango file when you try to flash it.
You can fix the recovery.img or remove the device authentication in the zip files update-script.
Click to expand...
Click to collapse
I uploaded some photos... thx
aeterno said:
Can you help me with any link to download cwm 6.0.x.x for my SK17a??? i did't find it.... pleasee =)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2545367
mihahn said:
Just use the boot.img in the rom zip of cm11. Flash it and it should work
Click to expand...
Click to collapse
i did't enter in fastboot mode, my sk17a have Bootloader locked... How i can flash it from recovery?
aeterno said:
i did't enter in fastboot mode, my sk17a have Bootloader locked... How i can flash it from recovery?
Click to expand...
Click to collapse
With your locked bootloader forget cm, you can't install it. Either unlock it, or install cwm using the xparts app from the playstore and flash a rom for locked bootloader
Sent from my Nexus 4 running Android 4.4
aeterno said:
i did't enter in fastboot mode, my sk17a have Bootloader locked... How i can flash it from recovery?
Click to expand...
Click to collapse
bulls eye. i thought my spider sense tinggling without particular reason.
u just can't use any aosp based rom on locked bootloader. people just doesn't read nowadays, just flashing whatever thrown at them. lol
Here you can get everything for your
CUBOT ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Be aware!!!! check your version go to settings->about phone->build number.
1.3 stay here
v0.7 or lower!
v1.5!
v0.8 turbo
I am not responsible for anything that happens to your device.
Did you also flash the wrong rom or/and recovery on your cubot one?? I'm going to show you how to get unbricked! (Goto 2.b)
1.Recovery
Installing a Recovery:
a. you have still a working rom
- use Mobileuncle Tools and press flash recovery from sdcard. (see attachment for immage)
b. rom broken
power phone down, hold power+volume down. You should get a screen with chinese lettres, don't press anything
- grab MtkDroidTools
- attach your phone
- let it be recognized (adb drivers needed)
- klick "root, backup, recovery"
- klick allready prepared files
- klick recovery and boot button
- cancel rom selection
- select your recovery file
- klick yes
- klick yes to boot in recovery
- see your phone burning
C. Use sp flash tools(advanced)
Click to expand...
Click to collapse
2.Rom
A.custom rom
Make sure you have cwm. Go ahead and install a custom rom like discribed in the other forum. Then flash boot.zip and your done
You can flash any custom rom!!!!!
B broken rom
Go up and install cwm
Flash boot.zip(see attachment)
C. Difficult way (only if the two things above fail)
I won't hold your hand how to use sp Flash tools, but I will provide you with the image. This is untested (not even by myself). I made this backup with MTK droid tools and prepared the block for sp Flash tools. Do not flash "PRELOADER" and the "DSP_BL" without any reason. (So never!!)
here's the link to the files mediafire
Click to expand...
Click to collapse
3. I Have Lost my IMEI
A. Turn your phone, pull out the battery and you could read them
B.
view other forum for other way to do it
driver
adb driver link
legal Information:
I used some of information from http://forum.xda-developers.com/showpost.php?p=44784396/URL]. I would like to thank him.
Everything i or other users present here is free for use, but everything you do with your device can possibly destroy your device.
Neither i or anybody else than you is responsible when anything goes wrong when you apply any of the provided tools, firmware, scripts, recoveries, etc.
Changing any part (Hardware or Software) of your device can cause lost of warranty.
I give no support via PN. Post your Questions here.
Click to expand...
Click to collapse
I'm not a native English speaker. If there's any spelling/wordchoice/... mistake, feel free to say it. Any improvements are always welcome. I probally won't be frequent visiting my own post so help each other.
This thread is in Beta
Don't forget to hit thanks if I helped you! :good: (right below this post on the left)
http://forum.xda-developers.com/showpost.php?p=44784396&postcount=2
revesed
reversed
Jelly bean is nice and all, but....
Does this mean there is an upgrade rom in the works for 1.3? Because that would be really really great....really.
Is there a custom rom compatibile with Cubot One Turbo v 0.8? Thanks
Sent from my CUBOT ONE using XDA Free mobile app
y2imm said:
Does this mean there is an upgrade rom in the works for 1.3? Because that would be really really great....really.
Click to expand...
Click to collapse
Yeah sure
danistuta said:
Is there a custom rom compatibile with Cubot One Turbo v 0.8? Thanks
Sent from my CUBOT ONE using XDA Free mobile app
Click to expand...
Click to collapse
Not yet but you can backup your phone with mtkdroidtools, flash recovery (generate also with mtkdroidtools), backup in cwm, flash custom rom, restore boot.img from backup , wip and reboot. Everything should be fine and in case of failure you can always revert back!!
Dave
I've got cwm 6.0.4.4 installed on my Cubot One Turbo 0.8. Is it possibile use it to flash a different rom?
Sent from my CUBOT ONE using XDA Free mobile app
danistuta said:
I've got cwm 6.0.4.4 installed on my Cubot One Turbo 0.8. Is it possibile use it to flash a different rom?
Sent from my CUBOT ONE using XDA Free mobile app
Click to expand...
Click to collapse
Yeah but it is more dificult make a cwm backup(make sure it isn't corrupt), wipe everything, install rom, restore boot.img from back-up and it should work (and you can revert back in cade of!)
Good news for everyone with a newer Cubot, who is looking for the v1.5.
Today the guys from Cubot finally replied to my emails.
This is the link for the 1.5 firmware:
http://pan.baidu.com/s/1nt5E6b3?qq-pf-to=pcqq.temporaryc2c
For me it worked out very well, I rescued my Cubot with it.
But be aware that this the latest version of the firmware, propably for the newer Cubot One.
Is there already news on any new ports for our Cubots? I tried to flash the new MIUI V5, but it doesn't work with the new Cubot One. I just see a grey screen after installing it successful. Man I would kill a OMNIROM or Cyanogenmod...
Regards
rob
So, I've enough rum and cokes to attempt something with my phone...I downloaded that 1.5, but its a rar file, I'm used to CM, how do I install a rar?...also, is there even a diff between 1.3 and 1.5.....
Cubot One with firmware v0.8 and MT6589T 1.5GHz CPU
Hi guys!
If you're having Cubot One with firmware v0.8 and MT6589T 1.5GHz CPU read my post written here!
Cheers
I have backed up the stock recovery via flashify. Would this image be of interest for you? (Cubot ONE V.1.3)
drevel123 said:
I have backed up the stock recovery via flashify. Would this image be of interest for you? (Cubot ONE V.1.3)
Click to expand...
Click to collapse
Of course so I can make better recoveries (touch & twrp).
Can you share a link to file or a private massage?
Thanks in advance
@r0b
Have you tried to restore the stock v1.5 boot.img?
Sent from my CUBOT ONE using XDA Free mobile app
y2imm said:
So, I've enough rum and cokes to attempt something with my phone...I downloaded that 1.5, but its a rar file, I'm used to CM, how do I install a rar?...also, is there even a diff between 1.3 and 1.5.....
Click to expand...
Click to collapse
there'q a diffrence!
Hi, I uploaded the backups of the recovery and the kernel to my Dropbox (because I can't attach files to my post using my smartphone).
Here is the link:
dropbox.com/s/0lff4msqxs6ak9e/Cubot%20ONE%20V1.3.zip?dl=0
Is there any Custom Rom for V1.3? Because the roms in the link you shared in your first post seem for V0.8 only?
drevel123 said:
Hi, I uploaded the backups of the recovery and the kernel to my Dropbox (because I can't attach files to my post using my smartphone).
Here is the link:
dropbox.com/s/0lff4msqxs6ak9e/Cubot%20ONE%20V1.3.zip?dl=0
Is there any Custom Rom for V1.3? Because the roms in the link you shared in your first post seem for V0.8 only?
Click to expand...
Click to collapse
yeah flash any 0.8 rom and than flash the boot.zip from the first post!
Thanks for the info! I was just a little worried, didn't want to break the phone.
y2imm said:
...I downloaded that 1.5, but its a rar file, I'm used to CM, how do I install a rar?...
Click to expand...
Click to collapse
If the ROM is in a rar file, you can flash it via SP_Flash_Tool. You have to extract the rar, then probably use the following guide.
cool
thans
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey guys! Paranoid Android is finally back!
Here I built a first release to share with you. The rom is based on AOSP sources, Paranoid code and Cyanogenmod stability fixes, plus other things hand-written for S6 good compatibility. Now stop talking and enjoy Paranoid!
Disclaimer:
I take no responsibility for lost data, broken devices or anything else you encountered
during/after flashing this ROM.
You are responsible for what you are using on your devices!
Do some research before doing anything and always make sure to have a backup!
Click to expand...
Click to collapse
NOTE: This ROM is based on AOSP. So make sure you follow exactly the steps I write to install.
Download:
Mod Edit
Link removed
Bugs:
some lags, camera starts 50% of times, frame drops here and there playing videos.
Steps:
flash 5.1.1 with odin (cause of bootloader)
flash paranoid (gapps not now, it won't boot!)
reboot
back to recovery
system and cache wipe
flash gapps
reboot
Credits:
Paranoid Android team
CyanogenMod team
Slim team (AOSP-CAF)
tdcfpp
Sources:
Exynos
And some personal fixes I'm still working on
XDA:DevDB Information
Paranoid Android, ROM for the Samsung Galaxy S6
Contributors
Tonylel
ROM OS Version: 6.0.x Marshmallow
Based On: AOSP
Version Information
Status: Beta
Created 2016-07-29
Last Updated 2016-07-29
hey man. I am willing to test this ROM, but you are telling us to flash android 5.1.1 to our phone? I mean, the title is saying that It is Android 6.0.1?
I am willing to test this rom too. But we have bootloader for android 6 and we cannot flash back to bootloader 5.1.1. How can we flash this Rom exactly? Which bootloader exatly do you mean??
Gesendet von meinem SM-G925F mit Tapatalk
alfo2004 said:
I am willing to test this rom too. But we have bootloader for android 6 and we cannot flash back to bootloader 5.1.1. How can we flash this Rom exactly? Which bootloader exatly do you mean??
Click to expand...
Click to collapse
Mr.pakkis said:
hey man. I am willing to test this ROM, but you are telling us to flash android 5.1.1 to our phone? I mean, the title is saying that It is Android 6.0.1?
Click to expand...
Click to collapse
You need to flash the stock Android 5.1.1 Rom with Odin because you cant flash the cm 13 Rom over an Android M bootloader (kernel not seandroid enforcing)
Tonylel said:
You need to flash the stock Android 5.1.1 Rom with Odin because you cant flash the cm 13 Rom over an Android M bootloader (kernel not seandroid enforcing)
Click to expand...
Click to collapse
Doesn't exactly make sense that it says Kernel not seandroid enforcing, when its a bootloader problem, and the fact that he is calling it a 6.0.1 ROM, when he asks us to DOWNgrade. I mean, what about all the 6.0.1 functions? Will we loose them? Like doze etc..
Woah, nice one, out of nowhere.
How did you get the camera partially working? Hopefully your hard work can help our progress with this device.
Any links for a SM-g925F 5.1.1 file?
holy ****. amazing
too bad i cant flash it cuz my chqrging port is broken..and odin dsnt recognize my phone anymore((
Tonylel said:
Steps:
flash 5.1.1 with odin (cause of bootloader)
flash paranoid (gapps not now, it won't boot!)
reboot
back to recovery
system and cache wipe
flash gapps
reboot
Click to expand...
Click to collapse
These steps make no sense. Why would you flash paranoid and later wipe the system to flash gapps.. ? When you wipe system the paranoid will be gone too.
Btw the install is taking ages..stuck at "patching system image unconditionally" for like an half hour..
I cant downgrade. Any help guys? it fails at the NAND write start...
Mr.pakkis said:
I cant downgrade. Any help guys? it fails at the NAND write start...
Click to expand...
Click to collapse
Just flash the 5.1.1 bootloader for 925f
In Odin flash it under BL
What about fingerprint?
Quintz said:
Just flash the 5.1.1 bootloader for 925f
In Odin flash it under BL
Click to expand...
Click to collapse
Its really hard to find a link. Do you have one?
Mr.pakkis said:
Its really hard to find a link. Do you have one?
Click to expand...
Click to collapse
I already gave you the link -.- => Click on the "925f"
Quintz said:
I already gave you the link -.- => Click on the "925f"
Click to expand...
Click to collapse
xD sorry, didnt see it. I tried, but when I try to use the choose the file, I get an error saying md5 error! Binary is invalid
What to do now...? Can I perhaps try to flash it under AP?
Edit; It doesnt work underneath AP.
Mr.pakkis said:
xD sorry, didnt see it. I tried, but when I try to use the choose the file, I get an error saying
What to do now...? Can I perhaps try to flash it under AP?
Edit; It doesnt work underneath AP.
Click to expand...
Click to collapse
Reason why you get the error is because you need the delete the .md5 extension from the name just to be .tar. Anyway dont risk it and flash the bootloader i post now.
1. Are you sure you have a 925F not 925I or something.
2.Try this bootloader: https://www.androidfilehost.com/?fid=24052804347786560
I wonder if you can install the rom because for my its busy installing for 30+ min.
Quintz said:
Reason why you get the error is because you need the delete the .md5 extension from the name just to be .tar. Anyway dont risk it and flash the bootloader i post now.
1. Are you sure you have a 925F not 925I or something.
2.Try this bootloader: https://www.androidfilehost.com/?fid=24052804347786560
I wonder if you can install the rom because for my its busy installing for 30+ min.
Click to expand...
Click to collapse
I am 100% positive I have a 925F. Used tons of ROMs, flashed kernels and generally changing stuff on my phone. After flashing the bootloader, should I boot into the recovery and install the ROM?
Not working
I have tried flashing this rom for like 5 times. Every time it get stuck on this:
"patching system image unconditionally"
What I did was:
- Install Lollipop
- Root
- TWRP Recovery
- Flash Rom
I will request you to please provide more detailed steps.
Well, I think that the developer should add support for the 6.0.1 bootloader...
---------- Post added at 07:28 PM ---------- Previous post was at 07:25 PM ----------
Also didnt work either. In the corner of the download side its written SW REV. CHECK FAIL. DEVICE: 3, BINARY: 2
Yes guys you can just flash bootloader 5.1.1 only. This allows aosp flash, it won't downgrade to 5.1.1, the flash will UPGRADE to 6.0.1 later.
For those who have some problem while flashing try perform a full wipe (system/cache/dalvik) and if still persist try change/update your recovery.
Right, I forgot: fingerprint not working because really no sources for that.