Screen Lock Widget Question - Galaxy S III Q&A, Help & Troubleshooting

Hey, I have SwitchProWidget (Used it since my HTC Hero, Desire HD, S2 and now my S3.), and many other applications/widgets that lock the screen without the need for pressing the actual power button, however; upon pressing it, it turns the screen off, then straight back on again. The respective apps are all Device Administrators with the permission to lock the screen, and it worked on my S2. I've tried numerous custom ROM's, and It's the same on all of them.
Anyone have any advice? It's driving me nuts, as I've got a chipped bone in my right thumb, and pressing it (With the additional hardship of an Otterbox Commuter case) is not only tedious, but physically painful.
I really hope someone can shed some light, and/or help me fix it.

Anyone?

Mullicious said:
Hey, I have SwitchProWidget (Used it since my HTC Hero, Desire HD, S2 and now my S3.), and many other applications/widgets that lock the screen without the need for pressing the actual power button, however; upon pressing it, it turns the screen off, then straight back on again. The respective apps are all Device Administrators with the permission to lock the screen, and it worked on my S2. I've tried numerous custom ROM's, and It's the same on all of them.
Anyone have any advice? It's driving me nuts, as I've got a chipped bone in my right thumb, and pressing it (With the additional hardship of an Otterbox Commuter case) is not only tedious, but physically painful.
I really hope someone can shed some light, and/or help me fix it.
Click to expand...
Click to collapse
What version of Android did you have on your S2? I suspect it may be an issue with the app itself. I have never used a screen lock widget, but it sounds like the widget is putting the screen off, but is either immediately waking it again or something else is waking it again. I would suggest reporting a bug via the play store to the app dev.

Related

8125 stuck on 3 color boot screen

It says only ipl 2.25.0001 and spl 2.25.0001
I try a hard reset, but when it asks me to confirm by pressing SEND, I press SEND and nothing happens.. press any key and nothing happens, just sits there saying press SEND to confirm...
I tried flashing Cingular/AT&T's rom on to it, it was successful on the screen, but after rebooting, just went back into the 3 color screen...
Does anyone have any suggestions?
Additional info
I just wanted to add, I have searched threads here on xda-dev and other sites, and have found similar issues - normally the other issues have been resolved in one way or another involving a hard reset, which my phone will not complete. When it asks me to press send, the phone freezes at that point and does not accept any key entries (except reset). I would really appreciate any input. I also have a theory-that I may attempt this evening-If you hold the camera button down and reset, it brings up the boot loader screen (if my information is correct)... could my problem be caused by a faulty camera button? Maybe internally the button is remaining closed, which could prevent it from doing anything on a reset outside of the boot screen? Any engineers around that may know this? I am going to attempt (hopefully with low heat) to remove the button this evening... possibly even repair or replace it if the phone works with the button removed...(these thoughts are based on my phone being dropped in the sand at the beach...maybe a grain of sand worked it's way into the camera's button housing and is holding the contact closed)
problem's almost fixed
well thanks for no advice... i desoldered and removed the camera button (button 3). powered it on and the phone works. I reprogrammed the camera to button 5. (i also loaded a new WM6 rom and some other stuff) The last time I opened up the phone, I broke the itsy bitsy super micro tiny lock on the keyboard ribbon cable socket... so now my slide out keyboard doesn't work. I installed a full screen keyboard and set it to the messaging button (button 1) - the messaging button still brings up messaging with just a touch, but a long hold brings up a full screen touch keyboard that works fantastically!!! I am going to dismantle the very tiny micro switch and repair it, then resolder it back on the mainboard to make my camera work like it should again...and find a way to get the keyboard ribbon cable to lock into the socket...then my phone will be as good as new!
umm... thanks???
well congratulations on getting it working again.
tiny switch
I have taken the tiny little switch apart without breaking anything... one tiny grain of sand stuck under the button pressing on the switch plate... now i have to find a way to put the little switch back together... then attempt to solder it back onto the board without over heating nearby components. I have been playing around with Byka's cube... took a bit of tweaking to get it to work well.... not sure if I want to keep it or not... I have been trying to find htc cube, but no luck outside of a rom... which I may consider...but I just spent the past week reinstalling all of the software I use... Would like to just design my own windows for my phone if I had the time... Been working on an ion motor for an electric car...
I would like to thank everyone here at xda-dev. for all the information. Could not have learned so much, so quickly, if it weren't for this site.
oh... and I am using an 8125 (G4) with Faria Crossbow
Have the same problem...
Hi!
I have the same problem (but I don't have much tech know how).
It all started when phone got wet (inc. in battery compartment).
My phone would not soft reset beyond the Bootloader, unless I leave the battery out for a few hours. Then once it loads up, after a short amount of usage 2 things happen: 1) every time I would turn it on (or get a call) it starts in Camera (you didn't report it but you must have had the same experience). 2) the buttons don't work properly.
It finally dawned on me the camera button might be stuck, I set the button to "none", and no more more automatic camera. I still need to free the button altogether as still causing button freezeup and also allow soft resets.
I don't know much about soldering.
Any ideas?
Thanks

Face Buttons Unresponsive after standby

When I do a soft reset, my phone is fine and everything works okay. However, after the first time the screen cuts off to standby, when it resumes the buttons on the bottom panel (Home, Back, Call, End, Select) no longer function. I can confirm that they all function perfectly prior to standby, and after the fact, none of them.
I'm wondering if this is a known issue, and if there's anything I can do to patch it or look it up. I've tried a few different roms, and it's a constant issue. Even after a full wipe with Task29 and a reflash with two separate roms, the behavior sticks. As soon as the phone comes back from standby mode the buttons just fail.
If it's at all relevant this is a Sprint Touch Pro. If no one can help me and there's no alternative I ask for help finding a way to disable standby entirely. Sure keeping the LCD on constantly will drain the battery, but being able to use the answer and hang up buttons, and the camera FAR outweighs that.
Well, I haven't been able to find anyone with a solution, but I've worked around the issue a bit by installing Keepawake 1.1 and setting it to run when manilla is running. Now my phone never sleeps, and the face buttons work. I'm currently looking for a small piece of metal I can mount over the power button to prevent accidentally triggering standby mode. Then my phone will be mostly usable again. Hopefully someone can shed some insight as to the cause of it all, but for now at least I may have found a way to work around it. We'll see how it affects my battery life.
edit:
Most helpful recommendation (aside from a solution to the root of the problem): could anyone recommend a way to disable the power button, or possibly remap it to launch task manger or something useful?
edit2: Remapped the power button to lock the phone using RaphKeyboardConfig. Works okay for now. Between this and keepalive, my phone won't go into standby if left on it's own.

[Q] Titan Lock Screen Issue

Hi All,
My Titan has developed an annoying issue coming out of the standby / lock screen.
After the phone has been left and has locked it self, I press the power button to light up the display. Then when I try to slide the lock screen up nothing happens, the phone does not respond. This is also true of the buttons on the front, camera, and volume button. No response.
After a while the phone will start to respond again.
I have noticed that the phone updates email and message icons whilst its not reponding. Not sure if that is WHY it is not reponding though.
I have read that installing the facebook application from the market place can cause a similiar issue, but I do not have this app installed.
Has anyone else seen and/or solved this issue before?
What should i be looking at to cure it?
Thanks
David

[Q] Sreen freeze? hardware or software problem?

Hi there to everyone, I broke only the glass on my screen couple of weeks ago (it felt face down from about half a meter, thats stupid) and I change only the glass my self but since then i have a problem with the screen like: if I press a bit harder anywhere on the screen for about 2 sec the screen became irresponsible and also the back and menu buttons, home and power button work normal. If I press the home button it react as it should, it goes to home screen, so it's just the screen frozen on touch and I have to lock and unlock the phone to go to normal. On daily use it's not such a big problem as i don't press the screen too hard, the problem mostly occurs when playing games.
I would try a hard reset but I not rooted as I use some apps that don't work if I'm rooted and I can't save all my settings, saves and apps and personally I hate to reinstall everything back again.
I'm thinking this is a hardware problem but why it goes to normal only after lock/unlock procedure and i also find on a forum that this can be from the screen protector. It's something similar with the phone in this video the difference being that mine it freezing and that it moving by itself. youtube.com/watch?v=isBDKgxB5vs
Did anyone also experience this?
PS. I sorry for my english as it's not my own language but I'm trying to make my self clear as best as i can, Thank you

[Q] Wierd behaviour on lockscreen

Hello all,i'm using a 16Gb N9 WiFi only version,i'm on 5.1.1 stock rooted,mainly for AdAway use...I've been experiencing wierd issues for the last week or so,when either double tapping the screen,which doesn't seem to work 100% as has been until now.
What's more, i'm using a Moko Flip Case and flipping the cover doesn't always work as well.These are not concerning by themselves but despite which way i try to use to turn on the screen (double tapping,opening the cover,pushing power button) when the screen turns on and i swipe to unlock then immediately the screen turns off ,no matter how many tries i try to swipe to unlock,it turns off thus making a need for rebooting mandatory....
Has anyone else experienced this? Should i factory reset the tablet or is there a fix,mainly for the last part..Thanks for taking the time to read this!
Workaround
It has been happening ever since upgrade to 5.1.1. Reboot fixes it but is annoyance. I tried wiping cache and factory reset, but the issue still persists. The easiest solution is to left swipe on the camera to open the camera app, then use the back button to come back to login screen. This time around the pattern will work.
tagari said:
Hello all,i'm using a 16Gb N9 WiFi only version,i'm on 5.1.1 stock rooted,mainly for AdAway use...I've been experiencing wierd issues for the last week or so,when either double tapping the screen,which doesn't seem to work 100% as has been until now.
What's more, i'm using a Moko Flip Case and flipping the cover doesn't always work as well.These are not concerning by themselves but despite which way i try to use to turn on the screen (double tapping,opening the cover,pushing power button) when the screen turns on and i swipe to unlock then immediately the screen turns off ,no matter how many tries i try to swipe to unlock,it turns off thus making a need for rebooting mandatory....
Has anyone else experienced this? Should i factory reset the tablet or is there a fix,mainly for the last part..Thanks for taking the time to read this!
Click to expand...
Click to collapse
Does the problem go away when you take off the flip case? If so, put it back on and see whether you can make the screen go black depending on how you fold the case behind the tablet. If it's one of those three-part covers, flip the case to the back, then flip the outer third over once more - does that turn off the screen? The screen turns off when the magnets on the case and on the N9 are aligned, and this can also happen with the case flipped to the back.
Maya05 said:
It has been happening ever since upgrade to 5.1.1. Reboot fixes it but is annoyance. I tried wiping cache and factory reset, but the issue still persists. The easiest solution is to left swipe on the camera to open the camera app, then use the back button to come back to login screen. This time around the pattern will work.
Click to expand...
Click to collapse
Thanks!! I thought I was the only one with this,thanks for the workaround! You saved me from factory resetting!! Many thanks!!
christian_l said:
Does the problem go away when you take off the flip case? If so, put it back on and see whether you can make the screen go black depending on how you fold the case behind the tablet. If it's one of those three-part covers, flip the case to the back, then flip the outer third over once more - does that turn off the screen? The screen turns off when the magnets on the case and on the N9 are aligned, and this can also happen with the case flipped to the back.
Click to expand...
Click to collapse
Indeed it does go away without the case, I do have one of these three part covers. It works fine when the cover is on the back but I left for a business trip and left the cover at home at the moment. I'll definitely try when I get back! Thanks for the info!!
Sorry I was busy and didn't have time to check xda... Thanks both for your answers!!
My wife is having this same problem with the Nexus 9 I got her for her birthday... I got it with the official keyboard case, but when the problem starts happening, it continues to happen even when the tablet is completely removed from and separated from the case. I also tried running the camera from the lockscreen, returning to the lockscreen, and trying to unlock the tablet without success. She is just using the slide to unlock screen without any security.
weird...lucky mine doesn't do this...or knock on wood, hasnt yet lol
i have double tap to wake up tablet option from eX kernel and i also use a passcode unlock screen and i also have a moko type magnetic case...everything is fine for me(so far...)
ot: what lockscreen app passcode app works so that when u enter 4digits u DON"T have to press the enter key to get in...i hate having to press the enter
in iOS iphone u just need to enter 1 2 3 4 <unlocks> goes to homescreen
stock android : enter 1 2 3 4 ENTER key then it unlocks

Categories

Resources