Jelly Bean Android Open Kang Project
Downloads
Build3:
Goo.im Mirror
Build2.2:
Goo.im Mirror
Build2.1:
Goo.im Mirror
Note: A patch is needed for audio to work
Audio patch - Goo.im Mirror
Build2:
Goo.im Mirror
Nightlies
Jelly Bean nightlies on Goo.im
Note: Nighties are not intended for daily usage, might not even boot or work correctly.
Changelog
Build3
Camera
More fixes to audio
JB 4.1.2
AOKP JB M1
Mass storage
Bluetooth
Anryl's kernel
Build2.2
Fixed In call audio
Fixed USB Mass Storage
Fixed some audio glitches
Fixed rendering of some videos
Build2.1
Fixed data
Fixed graphics glitches
Updated kernel
Fixed battery meter
Fixed charging
Sources
Device tree [Forked from agrabren]
If you want to do a commit,just drop me a pm with the repo you want to commit to and your github username
Credits
Anryl
TeamKang
TeamEvo
Agrabren
Xda
Goo.im
Good to see new devs in GSM Section
Good luck! Let the Kang-ing begin.
Temka1337 said:
Good to see new devs in GSM Section
Good luck! Let the Kang-ing begin.
Click to expand...
Click to collapse
helicopter88 is not a new dev in GSM EVO 3D. -.-
sent from my mwakious3D ROM loaded EVO 3D x515m
Temka1337 said:
Good to see new devs in GSM Section.
Click to expand...
Click to collapse
?! He made an AOKP ROM before.
OT: I'm really looking forward to an AOKP ROM based on JB. Want to try out Build 1 too, but goo.im is insanely slow at the moment:crying:
is this NORMAL rom?
or will it overwrite also the recovery?
pls answer if this work as a normal flashable rom and we can reflash other roms without reflashing recovery it would be nice to know..
E \V o T lR i X ™ 3lD said:
is this NORMAL rom?
or will it overwrite also the recovery?
pls answer if this work as a normal flashable rom and we can reflash other roms without reflashing recovery it would be nice to know..
Click to expand...
Click to collapse
well i tried build3 and it didnt wipe the recovery but not very usable either
E \V o T lR i X ™ 3lD said:
is this NORMAL rom?
or will it overwrite also the recovery?
pls answer if this work as a normal flashable rom and we can reflash other roms without reflashing recovery it would be nice to know..
Click to expand...
Click to collapse
I don't release builds that wipe recovery..
helicopter88 said:
I don't release builds that wipe recovery..
Click to expand...
Click to collapse
that made me lol when it happened to me when i boot normaly it would boot into miui and when i try recovery it would boot jb
helicopter88 said:
I don't release builds that wipe recovery..
Click to expand...
Click to collapse
thanks for that answer!
Audio still not work...
Can any one tell me what is the size of the 4.1.1r3 source size after a repo sync command...its 7gbn still downloading in terminal....am tired.
Sent from my HTC EVO 3D X515m using xda app-developers app
New nightly uploaded
helicopter88 said:
New nightly uploaded
Click to expand...
Click to collapse
Changelog? Wifi and audio fixed?
Sent from my HTC EVO 3D X515m using xda premium
stefanschroen said:
Changelog? Wifi and audio fixed?
Sent from my HTC EVO 3D X515m using xda premium
Click to expand...
Click to collapse
Don't download the nightly as I'm fixing wifi right now
helicopter88 said:
Don't download the nightly as I'm fixing wifi right now
Click to expand...
Click to collapse
audio already fixed?
stefanschroen said:
audio already fixed?
Click to expand...
Click to collapse
I'm working on wifi,might have fixed audio too
helicopter88 said:
I'm working on wifi,might have fixed audio too
Click to expand...
Click to collapse
Nice man!!! Great work!!!
helicopter88 said:
I'm working on wifi,might have fixed audio too
Click to expand...
Click to collapse
hehehe pressing F5 thanks
Wifi won't be fixed today,will do something tomorrow,for sure
helicopter88 said:
Wifi won't be fixed today,will do something tomorrow,for sure
Click to expand...
Click to collapse
that's a pity, and audio?
Related
Here is a link to the nightly CM6 builds being compiled by the guys at #teamdouche.
NIGHTLY BUILDS Here
MDPI GAPPS Here
Credit to #teamdouche for their amazing dedication and hard work!
If you want this link to stay up, do NOT bug #TeamDouche do not ask them any questions, do not report any bugs, let them do their job!!!!!
THESE DO NOT INCLUDE GOOGLE APPS AND ARE STILL BUGGY. DO A NANDROID BACKUP, WIPE AND THEN FLASH
Cool man thanks.
Thanks man
any link to changelog?
I flashed this and I got stuck in boot loop so I reverted to Myfroyo-rc1 that I edited to have stock launcher
Sent from my myTouch 3G Slide using XDA App
kingofyo1 said:
any link to changelog?
Click to expand...
Click to collapse
It'd be over on Chris Soyar and Wes Garner's githubs probably.
Whoareyou said:
I flashed this and I got stuck in boot loop so I reverted to Myfroyo-rc1 that I edited to have stock launcher
Sent from my myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
No, you reverted to Eugene's ROM that you put Launcher2 in.
r0man said:
It'd be over on Chris Soyar and Wes Garner's githubs probably.
No, you reverted to Eugene's ROM that you put Launcher2 in.
Click to expand...
Click to collapse
SNAP!
Which one is more complete this rom or eugene's?
lviv73 said:
Which one is more complete this rom or eugene's?
Click to expand...
Click to collapse
Did you read the OP? It doesn't have google apps and is very buggy, vs Eugenes is a daily driver. hmmm
can someone post the google apps in a flashable zip?
rapidfire224 said:
can someone post the google apps in a flashable zip?
Click to expand...
Click to collapse
Just download rom manager they have Mytouch slide in there inventory thing now with cm6 nightlys and google apps
Sent from my myTouch 3G Slide using XDA App
WOW.. Incredible.. great work ...thanks
has anybody tried any of the nightly builds to see how much is working and how stable they are?
I tried the newest on from the 14th. It booted up and that was about all you could do. No wifi, so I stopped there
CheifzReloaded posted something on his twitter the other day regarding the Slide so I'm guessing it won't be to much longer before we have our CM6 ported from them guys.
bodybombs said:
has anybody tried any of the nightly builds to see how much is working and how stable they are?
Click to expand...
Click to collapse
I've been flashing them every night for fun, but they are definitely not usable. There are lots of bugs. I just flash them to get a taste of their progress and what kind of features and goodies we can expect. It's going to be awesome when they give us a finished product!
hopefully they release soon, i still havent rooted yet, im waiting to see how well the release is before, but im getting bored with stock.
What kernel version is being used on these nightlies?
If it's the same as what we have now you can push wlan.ko to fix wifi.
gapps: http://kanged.net/mirror/download.php?file=gapps-mdpi-FRF91-3-signed.zip
r0man said:
What kernel version is being used on these nightlies?
If it's the same as what we have now you can push wlan.ko to fix wifi.
gapps: http://kanged.net/mirror/download.php?file=gapps-mdpi-FRF91-3-signed.zip
Click to expand...
Click to collapse
While this may work, the phone goes to a black screen after about a minutes worth of use and the only way I've found to make it workagain is to pull the battery. Eugene's CM6 kang is much more usable than this is. Although I haven't tried it with gapps flashed over the top. That could be the difference. I will try it later and report back.
Hi all! I am compiling the sources of cyanogenmod for xperia neo! When it has finished loading the zip on multiupload! If you want to try flashing from recovery and see what goes and what's wrong! Then copy the logcat here to resolve bugs
Download: http://www.multiupload.com/NB1PGWDYCF with kernel FXP
Flash via recovery Clockworkmod!
Try the rom!
http://forum.xda-developers.com/showthread.php?t=1205141
I really hope you ment CM9
Marcell96 said:
I really hope you ment CM9
Click to expand...
Click to collapse
If I can compile it Yes
if you manage to do that I will test it.
Sipi1302 said:
if you manage to do that I will test it.
Click to expand...
Click to collapse
I put the download of rom in the first post
installing rom es we speak
yes! flash zip!
Is it your own source or you've compiled FXP sources to let us give it a try?
Thanks anyway mate good job!
Sent from my neo ROM cm7xperia_edition_v02
OK firs kernel in zip package is not working (endless boot) so I flash with Night-elf kernel and starts ok but no WiFi, and its CM7 not CM9, camera works as video too. Rom is fast with no lags. That is what I notice.
r-ikfoot said:
Is it your own source or you've compiled FXP sources to let us give it a try?
Thanks anyway mate good job!
Sent from my neo ROM cm7xperia_edition_v02
Click to expand...
Click to collapse
I compiled the rom cyanogen from source
Sipi1302 said:
OK firs kernel in zip package is not working (endless boot) so I flash with Night-elf kernel and starts ok but no WiFi, and its CM7 not CM9, camera works as video too. Rom is fast with no lags. That is what I notice.
Click to expand...
Click to collapse
Thanks for having tested! I'll change the kernel! It is cm7 not cm9! You can make a logcat?
Sorry I returned to may daily rom. Inspecting call so I try this on quick.
Sipi1302 said:
Sorry I returned to may daily rom. Inspecting call so I try this on quick.
Click to expand...
Click to collapse
When can you try! which kernel you used to boot?
I used Night-elf kernel from achotjan rom thread. Only thing is that WiFi is not working, it say error.
markolino631 said:
I compiled the rom cyanogen from source
Click to expand...
Click to collapse
What does it change compared to FXP release ?
Sipi1302 said:
I used Night-elf kernel from achotjan rom thread. Only thing is that WiFi is not working, it say error.
Click to expand...
Click to collapse
thanks!! have you not noticed other problems?
adridu59 said:
What does it change compared to FXP release ?
Click to expand...
Click to collapse
This rom was compiled from source of cyanogen and not those of team FXP
markolino631 said:
thanks!! have you not noticed other problems?
Click to expand...
Click to collapse
No except wifi error with this kernel, others seems working fine.
with which kernel wifi work?
this is a rom port for nexus one based on cm7.2 nightly and lewa 12.09.21
Working
Boot
Touchscreen
Lewa Apps and Launcher
Sd-Card
Wifi
Sms and Call -2g/3g
Bluetooth
Accelerometer
Audio
headphone
Superuser root updated and works
Installing Apps
GPS
Virtual Keys
Brightness
Sensors
Charger
Camera
USB Connection
Deep Sleep
Browser
Other's
Not Working/Broken:
CM7 Bugs
Please test the build and let me know if there are any bugs
Download link
Test Build 3(22nd Sept)
http://www.mediafire.com/?1jpji07o5mv6hlh
Note: I don't have the device as of now so please test it for me and let me know...enjoy
Feedback welcomed!!
Old outdated download
Test Build 2
http://www.mediafire.com/?hasaiz63gb80ohx
Test Build1
http://www.mediafire.com/download.php?d7t0l6klzhrb7e5
MR_EVIL said:
this is my first rom porting for nexus one...will be uploading the build in few mins...the only problem i have is graphical glitches ...screen keeps on flickering..any dev can help me iron out that issue will really be helpful
Click to expand...
Click to collapse
I think this rom was already ported.
Menelkir said:
I think this rom was already ported.
Click to expand...
Click to collapse
yeh i know but the file manager was not working and there were many issues apart from that and the OP has not updated it so i decided to port it
DO this, AND DO IT! take libhardware_legacy.so from a cm7 nexus one working rom and swap it into this port (lewa rom) and tell me how it goes
Wifi issue can be something related to wifi module or wpa_supplicant config file (located in /system/etc/wifi). Give a shot.
Btw, if this rom is cm7 based, you can try using some different kernel, like tiamat.
Menelkir said:
Wifi issue can be something related to wifi module or wpa_supplicant config file (located in /system/etc/wifi). Give a shot.
Btw, if this rom is cm7 based, you can try using some different kernel, like tiamat.
Click to expand...
Click to collapse
thanks wifi issue got resolved...will try tiamat kernal
Madflapjack said:
DO this, AND DO IT! take libhardware_legacy.so from a cm7 nexus one working rom and swap it into this port (lewa rom) and tell me how it goes
Click to expand...
Click to collapse
tried it but screen flickering is still there any other solution..
tiamat kernal gives me black screen on boot...no go..
MR_EVIL said:
tried it but screen flickering is still there any other solution..
Click to expand...
Click to collapse
actually that fix was for wifi, idk about screen flickering... when i get my device back from repairs i will see..
MR_EVIL said:
tiamat kernal gives me black screen on boot...no go..
Click to expand...
Click to collapse
Make sure that you didn't flash the ICS version. Flash v4.1.0 for Gingerbread
Sent from my Nexus One using XDA
Screenshots?
Sent from my Nexus One using XDA
cpm said:
Make sure that you didn't flash the ICS version. Flash v4.1.0 for Gingerbread
Sent from my Nexus One using XDA
Click to expand...
Click to collapse
yeah i tried the GB version V4.1.0 and screen blackout is the result..
citizen-erased said:
Screenshots?
Sent from my Nexus One using XDA
Click to expand...
Click to collapse
will upload the screenshots tonight..
If you followed all the steps properly, It cannot be any errors except for apps/base ROM's error.
I cannot update my port because I am 15 years old(14, in other country) and I have to study for the final exam
ps.I uploaded my latest port 'cause I had free time
reider123 said:
I cannot update my port because I am 15 years old(14, in other country)
Click to expand...
Click to collapse
happy birthday!
updated the lewa Port..enjoy...
hi , here have not updated ?
I love this ROM .
new LEWA is 09.05
MR_EVIL said:
updated the lewa Port..enjoy...
Click to expand...
Click to collapse
When is the new update coming
Sent from my Nexus One using xda premium
Viditoswal said:
When is the new update coming
Click to expand...
Click to collapse
Next friday at 20:00 UTC +9.
tommert38 said:
Next friday at 20:00 UTC +9.
Click to expand...
Click to collapse
LEWA for nexus one ?
Really?
I'm looking forward to it .
This was just a personal hobby project, but it seems many people are using these builds, so I'm starting this thread to keep the main CM thread clean.
The nightly is built at 6:30AM IndianStandardTime (GMT+5:30), and contains all changes synced till then. The most prominent difference between these builds and the official ones is that there builds are compiled using the Linaro toolchain. To me, this results in a smoother UI, and better battery life than the official builds. From time to time, these builds may also contain some hotfixes for small problems on official builds, and they may also contain some cherrypicks.
You can just install these builds over official builds without a data wipe. You can even go back to the official builds without a data wipe.
Download link: https://copy.com/vJqpoVqwoUXJ
Please check MD5 before flashing.
What are the drawbacks of building with Linaro? I assume there must be some, if the official build is not using this, right?
TheSaw said:
What are the drawbacks of building with Linaro? I assume there must be some, if the official build is not using this, right?
Click to expand...
Click to collapse
The drawbacks are that theoretically, there might be some unexpected side effects if building from a non-standard compiler. I personally haven't seen any since I've been using it. Also, I think the CM team thinks Linaro is just placebo, and hence they don't use it.
kalpik said:
Please check MD5 before flashing.
Click to expand...
Click to collapse
Can you please provide the MD5sum?
I'm glad you opened an independent thread for your build!
Keep it up!!
chrhei said:
Can you please provide the MD5sum?
Click to expand...
Click to collapse
The MD5s are also present in the link.
Is the pixelated icons fixed on your latest build: "6-25-2013"??
thanks..
markjamezmark said:
Is the pixelated icons fixed on your latest build: "6-25-2013"??
thanks..
Click to expand...
Click to collapse
Yes, they are fixed. Just so you know, they will be fixed in the next official nightly too
kalpik said:
Yes, they are fixed. Just so you know, they will be fixed in the next official nightly too
Click to expand...
Click to collapse
Nice! That's I've waiting for. Currently downloading your personal compiled build.
Do you have any ideas when the final/stable build will be released?
markjamezmark said:
Do you have any ideas when the final/stable build will be released?
Click to expand...
Click to collapse
Never, as our devices are't fully open source
kalpik said:
Never, as our devices are't fully open source
Click to expand...
Click to collapse
What is hotfix? Sry for noob question
And where is changelog?
dinos3 said:
What is hotfix? Sry for noob question
And where is changelog?
Click to expand...
Click to collapse
There are no stupid questions, only stupid answers
I'm sorry I didn't explain it better in the OP. By hotfix, I mean like the icon pixellation issue that was present in the past few official nightly builds wasn't there on mine. So from time to time, if I find some problem in the official nightlies, and I can fix them, the fixes will be included in my builds
kalpik said:
There are no stupid questions, only stupid answers
I'm sorry I didn't explain it better in the OP. By hotfix, I mean like the icon pixellation issue that was present in the past few official nightly builds wasn't there on mine. So from time to time, if I find some problem in the official nightlies, and I can fix them, the fixes will be included in my builds
Click to expand...
Click to collapse
Thanks
Are you going to write changelog maybe?
Changelog is the same as the official changelog
Going to flash this because.
A) last few roms I Flashed have either broken phone or Gps won't lock never both working.
b) and cos cyanogen mod is my preferred base for a rom
thanks buddy will report back after installing
Sent from my GT-I9100 using Tapatalk 2
Just to be sure: Can I fix your build over the official CM10.1 nightly without a full wipe and go back to the official Nightly when needed?
Edit: Chrome reports m-10.1-20130625-UNOFFICIAL-i9100.zip as malicious "m-10.1-20130625-UNOFFICIAL-i9100.zip scheint schädlich zu sein."
feydakin said:
Just to be sure: Can I fix your build over the official CM10.1 nightly without a full wipe and go back to the official Nightly when needed?
Click to expand...
Click to collapse
That is correct
Sent from my GT-I9100 using Tapatalk 4 Beta
diddly3000 said:
Going to flash this because.
A) last few roms I Flashed have either broken phone or Gps won't lock never both working.
b) and cos cyanogen mod is my preferred base for a rom
thanks buddy will report back after installing
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
When GPS don't lock in a nightly, wipe cache partitions and dalvik cache and fix permitions. Ever works for me.
Sent from my GT-I9100 using Tapatalk 4 Beta
feydakin said:
Chrome reports m-10.1-20130625-UNOFFICIAL-i9100.zip as malicious "m-10.1-20130625-UNOFFICIAL-i9100.zip scheint schädlich zu sein."
Click to expand...
Click to collapse
Yup, I have seen that too. But I think Chrome does not like copy.com.
Nice rom so far. Gps works as does phone
Sent from my GT-I9100 using Tapatalk 2
Does anyone know a CM10, CM10.1, AOKP jb, AOKP jb-mr1, AOSP 4.1.2 or AOSP 4.2.1-ROM for the Evo3D where the 3D-Camera is usable?
cc-band said:
Does anyone know a CM10, CM10.1, AOKP jb, AOKP jb-mr1, AOSP 4.1.2 or AOSP 4.2.1-ROM for the Evo3D where the 3D-Camera is usable?
Click to expand...
Click to collapse
There is no such thing. You could try Mwakious transformer but it's not real AOSP, it's really desensed
Trying Mwakious v17 ROM to Patch with Autopatcher
donkeykong1 said:
There is no such thing. You could try Mwakious transformer but it's not real AOSP, it's really desensed
Click to expand...
Click to collapse
Thanx for Your answer.
Downloading the 17.0.301R_Base. Hope PDroid Autopathcer works on it ...
Don't know about PDroid. Hope it works for you
Sent from my HTC EVO 3D X515m using Tapatalk 4 Beta
17.0.301R_Base ROM of mwakious is not patchable withautopatcher
cc-band said:
Thanx for Your answer.
Downloading the 17.0.301R_Base. Hope PDroid Autopathcer works on it ...
Click to expand...
Click to collapse
No Success: 17.0.301R_Base ROM of mwakious is not patchable with PDroid autopatcher!
cc-band said:
No Success: 17.0.301R_Base ROM of mwakious is not patchable with PDroid autopatcher!
Click to expand...
Click to collapse
Well, base is not a complete ROM. You have to dl update via OTA and flash it, then try PDroid
OTA Rom Zip?
donkeykong1 said:
Well, base is not a complete ROM. You have to dl update via OTA and flash it, then try PDroid
Click to expand...
Click to collapse
Is the OTA-Update-resulting file a zip?
cc-band said:
Is the OTA-Update-resulting file a zip?
Click to expand...
Click to collapse
Yes
1) And is it also a complete ROM?
2) Do You know if the 3D-Camera works with it?
Mwakious has security system configured the way you need to dl base and then update. That's the only way you have the whole ROM. And yes, 3d camera works
Sent from my HTC EVO 3D X515m using Tapatalk 4 Beta
Mwakious included security; 3D Camera works
donkeykong1 said:
Mwakious has security system configured the way you need to dl base and then update. That's the only way you have the whole ROM. And yes, 3d camera works
Sent from my HTC EVO 3D X515m using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thank You vey much! I'll give it a try
cc-band said:
Thank You vey much! I'll give it a try
Click to expand...
Click to collapse
You're welcome. Although, I don't think PDroid will work because it's sense based but 3d works for sure. You really can't have both at this time
donkeykong1 said:
You're welcome. Although, I don't think PDroid will work because it's sense based but 3d works for sure. You really can't have both at this time
Click to expand...
Click to collapse
Oh Then I wont't give it a try and will stay at the KingCobra3D 2.3.4 ROM. Here 3D Camera and PDroid works with "Sense 3.0"
cc-band said:
Oh Then I wont't give it a try and will stay at the KingCobra3D 2.3.4 ROM. Here 3D Camera and PDroid works with "Sense 3.0"
Click to expand...
Click to collapse
I don't know if u have heard about YAS4 ROM - it's ICS with sense 4.1 and fully working 3d camera and recorder http://forum.xda-developers.com/showthread.php?t=2422629&page=63