Developers only!!! Please no general discussion in this thread. Any comments / thanks etc can go over in the general section.
To build you will need:
android_frameworks_base
device_htc_vigor
vendor_htc_vigor
android_device_htc_msm8660-common
vigor_aosp_kernel
Place in the respective places in your AOSP branch of choice and build. In CM9 I have:
Working:
Radio
Wifi
GPS
G sensor/accelerometer
Compass
Vibration
Sound
Microphone
Light/prox sensor
USB mounting
Cameras
Not working:
Bluetooth headset
If you fix something please send a pull request back to me.
Good luck have fun
https://github.com/Chad0989
New build box fund:
Goal reached. Thanks everyone!!
What I ordered: AMD FX-8120 + 16GB DDR3 (2x 8GB) + cheap board + cheap graphics card
I will try to get the CM9 source to download (I have tried about 10 times w/o luck) and take a look at this! We all appreciate your hard work.
nice chad but question is their any specific commits i need from the frameworks_base? the ones u merged in i assume? the last 5
JoelZ9614 said:
nice chad but question is their any specific commits i need from the frameworks_base? the ones u merged in i assume? the last 5
Click to expand...
Click to collapse
Yes. I pulled in and based it on some JB stuff. Makes it easier in the future. HTCVigorQualcommRIL will probably disappear eventually. JB seems to have the right idea where radio stuff is headed by separating SIM states from radio states .
If someone has a lot of spare time to and a fast build machine It would be really great if you could go through the vendor files and figure out which prebuilt libs we can get rid of and build from source instead. I'm sure there's a ton of stuff in there that's not necessary.
chad0989 said:
If someone has a lot of spare time to and a fast build machine It would be really great if you could go through the vendor files and figure out which prebuilt libs we can get rid of and build from source instead. I'm sure there's a ton of stuff in there that's not necessary.
Click to expand...
Click to collapse
I'm gonna see if I can get this to build on AOKP... I'll need to merge the frameworks/base stuff first.
dmeadows013 said:
I'm gonna see if I can get this to build on AOKP... I'll need to merge the frameworks/base stuff first.
Click to expand...
Click to collapse
Repo sync took way too long... Building now...
Ok got a libcrypto error... Idk what the problem is... Gonna check with Roman
Edit: Roman says it's a problem with the recovery that koush edited for CM code. Trying to revert it
dmeadows013 said:
Ok got a libcrypto error... Idk what the problem is... Gonna check with Roman
Edit: Roman says it's a problem with the recovery that koush edited for CM code. Trying to revert it
Click to expand...
Click to collapse
Or you could use amon ra
Sent from my Kindle Fire using Tapatalk 2
pwned3 said:
Or you could use amon ra
Sent from my Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
No it's causing it to not build lol. I think I fixed it though...
dmeadows013 said:
No it's causing it to not build lol. I think I fixed it though...
Click to expand...
Click to collapse
So protekks loss of power doesnt affect you at all?
Btw, chad, does this use the gb wifi drivers since we don't have ics source?
Sent from my cm_tenderloin using Tapatalk 2
antp121 said:
So protekks loss of power doesnt affect you at all?
Btw, chad, does this use the gb wifi drivers since we don't have ics source?
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Yeah he said it uses the old drivers until we get kernel source.
Sent from my Rez with fangs
i remember when we were in the age of cm7，most people thought the camera didnt work due to the kernel source，but a guy from China made some tweaks and then the camera worked，can anyone else recall this？maybe we can take that way
Sent from my ADR6425LVW using xda premium
Still working on AOKP but I tweeted a CM build
dmeadows013 said:
Still working on AOKP but here's a CM build http://www.androidfilehost.com/main...meadows013/cm-9-20120730-UNOFFICIAL-vigor.zip
Click to expand...
Click to collapse
This does NOT have gapps, correct?
Sent from my ADR6425LVW using Tapatalk 2
antp121 said:
This does NOT have gapps, correct?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Correct. This should be the last post in this thread about it. Its a dev thread lol
dmeadows013 said:
Correct. This should be the last post in this thread about it. Its a dev thread lol
Click to expand...
Click to collapse
Ive booted up with CM9 and its so amazing. AMAZING work chad and dmeadows. I get Roaming Indicator On, but according to twitter you guys get that too. Wonder if thats normal?
Edit -
AOKP M6 from DMeadows here: http://t.co/5dyljWG1
The roaming indicator problem should be fixed now thanks to joelz
How long did the 4G dropout take? I have been running aokp for a little while now and using data like a mad man and haven't broke a strong 4G signal yet. No roaming issues either.
Sent from my PG86100 using Tapatalk 2
Downloading meadows cm9 now.
Edit: didn't mean to post this delete please.
Sent from my ADR6425LVW using xda app-developers app
Related
Hopefully we will haz it soon, but back on topic.
Iv been playing with a cm7 rom for the last couple days I need someone to help me with writing and repackaging the zImage and ramdisk . Iv got a pretty good idea of how to get this fully working without having to create an entire update.zip each time.
Reply or PM me about what you think, if you wanna help beta test, or can help me out in the coming days. I'm sure with the knowledge of an extremely talented dev this can be accomplished
Sent from my PG86100 using Tapatalk
Future Ports will be posted here
Test cm7 alpha build!!!
NOT RESPONSIBLE FOR YOUR FLASHING HABITS =]
NANDROID FIRST
Sent from my PG86100 using Tapatalk
I am no developer, but I would love to help beta test! Just let me know what I can do to help!
I'm no dev either, but I will help beta test as well. Believe me I don't know what is worse, waiting for CM7 to be ported or continuing to use this sense 3.0. Anything that will get CM7 to the 3v0 quicker, count me in!
i would start by checking code on the OG evo of course the system and drivers are going to be different but it be a nice starting point for relevance
T3hPWN said:
i would start by checking code on the OG evo of course the system and drivers are going to be different but it be a nice starting point for relevance
Click to expand...
Click to collapse
Yeah the og is EVO is what I'm porting from iv replaced just about everything from system/lib etc... I need a aosp kernel port though
Sent from my PG86100 using Tapatalk
Get with this guy ----> netarchy Hes the man man when it came to kernels on the OG see if he can work something up since the source has been released. It would be nice if we can get this baby up and running.
I'm down to beta test if you need anymore.
I'll have to contact netarchy
Sent from my PG86100 using Tapatalk
hold on let me come up with somethin real quick if you dont mind that is
JoelZ9614 said:
hold on let me come up with somethin real quick if you dont mind that is
Click to expand...
Click to collapse
Ok sounds good.
Sent from my PG86100 using Tapatalk
you should contact toast, i though he was maintaining it
eltrutgnik said:
you should contact toast, i though he was maintaining it
Click to expand...
Click to collapse
Koush I thought was when it was fully released but I just wanted to work on a weekend project and see if we could have some early fun with it
Sent from my PG86100 using Tapatalk
I'm not a developer, but if I can help in anyway let me know. I need to get rid of sense.
Sent from my PG86100 using Tapatalk
ok uploading something
JoelZ9614 said:
ok uploading something
Click to expand...
Click to collapse
You're a machine lol
Sent from my PG86100 using Tapatalk
here definetely nandroid before flashing....all credits to cyanogen and his team.....
http://www.multiupload.com/M8WXM98VYB
JoelZ9614 said:
here definetely nandroid before flashing....all credits to cyanogen and his team.....
http://www.multiupload.com/M8WXM98VYB
Click to expand...
Click to collapse
Do we need to DL Gapps also? If so, which ones?
Sent from my PG86100 using Tapatalk
anon20 said:
Do we need to DL Gapps also? If so, which ones?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
oh yea forgot about gapps lol hold on
cm7 shooter 3d port http://www.multiupload.com/M8WXM98VYB
Gapps http://www.multiupload.com/7TAF9ZOVTI
Credits to cyanogen and his team
D's Kernel v.01 Alpha
Well guys here it is... The first official Alpha release of my first kernel. This is mostly stock, and I am just learning stuff. A few cool features though:
Swap memory Support (If you have swap space)
Unlocked HTC Performance
Optimized for Size
CFQ IO Scheduling by Default
Conservative Governor by Default
Over/Underclockable
Preemptible for Low Latency Desktop (Performance Tweaks)
Ability to Change Governors on the Fly (With SetCPU)
CPU Idle PM Support
Freshly compiled off of the Latest HTC Gingerbread Source for the Rezound
Much more
So yeah. That's all I have for now. I may make this into ICS later but not really sure at the moment. Just wanted to get a start on this.
Installation Instructions
To install this kernel, simply download the linked zip file and flash through recovery.
Downloads
DOWNLOAD
Mine
Mein mein mein
Updated OP with working link. ICS version will come soon
dmeadows013 said:
Updated OP with working link. ICS version will come soon
Click to expand...
Click to collapse
Please don't post anything until I get the ics base stable. You'll have a whole bunch of angry people crying about reboots and freezes if you do.
Sent from my ADR6425LVW using XDA
chad0989 said:
Please don't post anything until I get the ics base stable. You'll have a whole bunch of angry people crying about reboots and freezes if you do.
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
I won't. I don't post stuff based off of anyone else's stuff until they want.
dmeadows013 said:
I won't. I don't post stuff based off of anyone else's stuff until they want.
Click to expand...
Click to collapse
I just want to save you the grief. Haha.
Feel free to work on any fixes in the meantime though. I'll gladly pull any fixes you make to the base.
Sent from my ADR6425LVW using XDA
chad0989 said:
I just want to save you the grief. Haha.
Feel free to work on any fixes in the meantime though. I'll gladly pull any fixes you make to the base.
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
Lol ok. I've got my own build built with the conservative governor and it seems to run great for now on ICS.
Thread cleaned.
Remember, this is a kernel thread, no off-topic posts here.
If you want to post anything off-topic, head over to the rezound off-topic thread.
YZ.
i have just gained an insane amout of respect for Dmeadows after him making this kernel. Thank you for all your hard work.
Quick question, any support for tun.ko? Like to get VPN to work.
cm0803o2 said:
Quick question, any support for tun.ko? Like to get VPN to work.
Click to expand...
Click to collapse
Maybe. Gotta check it out.
Dmeadows013, Im running Twisted Senses GB rom and this Kernel doesnt boot. it gets stuck at the 4G LTE screen.
Easton999GS said:
Dmeadows013, Im running Twisted Senses GB rom and this Kernel doesnt boot. it gets stuck at the 4G LTE screen.
Click to expand...
Click to collapse
Hmm Ill look into it
dmeadows013 said:
Hmm Ill look into it
Click to expand...
Click to collapse
Thank you for all your hard work =]
I couldn't get it to boot either on ineff but I was probably doing something wrong with packaging the auto flash boot IMG thing lol. (not rooted yet, too lazy lol)
platinumrims said:
I couldn't get it to boot either on ineff but I was probably doing something wrong with packaging the auto flash boot IMG thing lol. (not rooted yet, too lazy lol)
Click to expand...
Click to collapse
It is already a boot.img lol. That may be why.
dmeadows013 said:
It is already a boot.img lol. That may be why.
Click to expand...
Click to collapse
Lol probably. Will try again when I get sum time
platinumrims said:
Lol probably. Will try again when I get sum time
Click to expand...
Click to collapse
Cool. I'll try it too maybe tomorrow. We will see
Sent from my ADR6425LVW using Tapatalk 2
cm0803o2 said:
Quick question, any support for tun.ko? Like to get VPN to work.
Click to expand...
Click to collapse
+1 request for this. Very useful for when I'm having to work on the road and forced to use shady wifi.
RIL requires us to figure out how to get the data to work on sense devices via the cdma lte radio driver. Now that the full binaries are open source for vzw galaxy nexus via aosp, could we not build a driver for our rezound? Just trying to think over here!
http://mobile.theverge.com/2012/7/1...project?utm_source=dlvr.it&utm_medium=twitter
The hardware is different therefore so would the drivers.
From what I've read, the RIL is as far as it can go until the ICS kernel source is released.
mjones73 said:
The hardware is different therefore so would the drivers.
From what I've read, the RIL is as far as it can go until the ICS kernel source is released.
Click to expand...
Click to collapse
Don't believe everything you read, protekk lied to us saying the RIL was fixed, saying all it needed was a kernel.
And when it came to proving it he just whinned and called us idiots
Chad has working 1x and calls go check his thread out
Sent from my ADR6425LVW using Tapatalk 2
superchilpil said:
Don't believe everything you read, protekk lied to us saying the RIL was fixed, saying all it needed was a kernel.
And when it came to proving it he just whinned and called us idiots
Chad has working 1x and calls go check his thread out
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
He's probably using the ril fix...
We need Chad to make the kernel because the ril fix we have now makes the pmem overflow(not enough alloted).
Because of this Chad is building a kernel ported from holiday and has to change the ril a little bit to fix it.
Hmm you're right, the RIL is the problem. All the devs just keep complaining and saying we need kernal source, clearly ril is the problem.
Sent from my ADR6425LVW using xda app-developers app
Reaper0294 said:
Hmm you're right, the RIL is the problem. All the devs just keep complaining and saying we need kernal source, clearly ril is the problem.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Actually it's mostly users copying what protekk said if you pay attention.
I've only seen a few devs say they need kernel source, and they only said it will make it easier not suddenly fix all problems with ril like protekk implied
My point being protekk lied, get it?
Sent from my ADR6425LVW using Tapatalk 2
superchilpil said:
Actually it's mostly users copying what protekk said if you pay attention.
I've only seen a few devs say they need kernel source, and they only said it will make it easier not suddenly fix all problems with ril like protekk implied
My point being protekk lied, get it?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
But he didn't lie. The kernel really needs more pmem. I have run the kernel and it keeps crashing and the log message says it needs more pmem
The Thunderbolt had source for ages...and it took forever for a stable MIUI port to be released because of the RIL. The RIL is not a part of the source code. To my understanding, it's "wired" into the libs, buildprop, framework, etc. In this case, ours is based off of Sense, not AOSP (if that makes any, well, sense.)
Like I said, to my understanding lol.
superchilpil said:
Actually it's mostly users copying what protekk said if you pay attention.
I've only seen a few devs say they need kernel source, and they only said it will make it easier not suddenly fix all problems with ril like protekk implied
My point being protekk lied, get it?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Building a working kernel without source isn't impossibly difficult. It has been done on several devices, including the Rezound. The Anthrax GB kernel is not built from HTC source, for example.
The RIL, would be much harder to reverse engineer without HTC Source code, but again not totally impossible either, just nearly so... We don't need the kernel source, we need the Android source from them. This will contain the source for HTC's Sense implementation of RIL, and give developers the information they need to reverse engineer a working AOSP RIL.
a.mcdear said:
Building a working kernel without source isn't impossibly difficult. It has been done on several devices, including the Rezound. The Anthrax GB kernel is not built from HTC source, for example.
The RIL, would be much harder to reverse engineer without HTC Source code, but again not totally impossible either, just nearly so... We don't need the kernel source, we need the Android source from them. This will contain the source for HTC's Sense implementation of RIL, and give developers the information they need to reverse engineer a working AOSP RIL.
Click to expand...
Click to collapse
And oems don't usually release those proprietary drivers :/
Po1soNNN said:
And oems don't usually release those proprietary drivers :/
Click to expand...
Click to collapse
True. But its not really the drivers that we need. The drivers are actually included in the "radio" packages that come with new firmware updates. What RIL is, is basically the bit of software that lies in between the radio drivers and the Android OS API's and stuff.
In other words, we have working drivers for the radios. What we need is the part that allows Android to interface properly with those radio drivers. But these parts are also often proprietary as I understand it...
You guys need to check out chads thread... He seems to be getting close..said was able to get 1x data on cm
Sent from my ADR6425LVW using Tapatalk 2
Jmrwbilly said:
You guys need to check out chads thread... He seems to be getting close..said was able to get 1x data on cm
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Which thread? His Incredikernel thread in developement?
**edit** nevermind found it
Jmrwbilly said:
You guys need to check out chads thread... He seems to be getting close..said was able to get 1x data on cm
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Was mentioned already in this thread earlier.
Sent from my ADR6425LVW using xda app-developers app
Great, I was not aware of the progress. Please don't spam the poor guy. Lets keep our fingers crossed. Anything we can do to help should be brought up in this thread.
a.mcdear said:
Which thread? His Incredikernel thread in developement?
**edit** nevermind found it
Click to expand...
Click to collapse
Where you find it at? I got lost!
superchilpil said:
Actually it's mostly users copying what protekk said if you pay attention.
I've only seen a few devs say they need kernel source, and they only said it will make it easier not suddenly fix all problems with ril like protekk implied
My point being protekk lied, get it?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Ok kernel has nothing to do with ril all it has is permissions for the radio (I'm not a kernel dev but I've been told this)
Sent from my Galaxy Nexus using xda app-developers app
xrintintin said:
RIL requires us to figure out how to get the data to work on sense devices via the cdma lte radio driver. Now that the full binaries are open source for vzw galaxy nexus via aosp, could we not build a driver for our rezound? Just trying to think over here!
http://mobile.theverge.com/2012/7/1...project?utm_source=dlvr.it&utm_medium=twitter
Click to expand...
Click to collapse
They're not open source theyre closed source but Verizon has provided the compiled binaries these websites need to get their info straight open source would mean they're uncompiled but we only have compiled binaries atm
Sent from my Galaxy Nexus using xda app-developers app
Po1soNNN said:
But he didn't lie. The kernel really needs more pmem. I have run the kernel and it keeps crashing and the log message says it needs more pmem
Click to expand...
Click to collapse
Omg get over it he lied lol even said on twitter that he didn't care anymore that Google I/o open his eyes chad already attempted to fix the pmem errors but as he said those errors are present even in stock roms he lied end of story
Sent from my Galaxy Nexus using xda app-developers app
a.mcdear said:
Which thread? His Incredikernel thread in developement?
**edit** nevermind found it
Click to expand...
Click to collapse
link?
http://www.xda-developers.com/android/pacman-rom-for-the-samsung-galaxy-nexus/
ive been seeing this on the xda homepage on and off for a while and it seems like a pretty bada$$ ROM, combinding settings from CM10, AOKP, and Paranoid.
I just wanted to throw this out there for any devs or potential devs that may be interested with impending releases of JB roms for our rezzys
If someone made this ROM it would be amazing... Hopefully someone will in the near future.
Sent from my Rezound fueled by jelly beans.
This would be an awesome Rom !,..hoping it can get ported.
Sent from my ADR6425LVW using Tapatalk 2
glad you guys took the time to check out the article, its really something, and who wouldnt love some arcade nostalgia?
agentofchaos said:
glad you guys took the time to check out the article, its really something, and who wouldnt love some arcade nostalgia?
Click to expand...
Click to collapse
Yea, this rom looks like it would be amazing and it would get rid of the need to decide between CM10 and AOKP.
Edit: I think i might try something with this. I found the github for the pacman rom. Note that i have little to no experience with building a rom so i probably will fail.
---------- Post added at 07:43 PM ---------- Previous post was at 07:21 PM ----------
If any devs see this and would like to give me pointers that would be much apperciated. :fingers-crossed:
Edit: Doing a repo sync right now.
jon7701 said:
Yea, this rom looks like it would be amazing and it would get rid of the need to decide between CM10 and AOKP.
Edit: I think i might try something with this. I found the github for the pacman rom. Note that i have little to no experience with building a rom so i probably will fail.
---------- Post added at 07:43 PM ---------- Previous post was at 07:21 PM ----------
If any devs see this and would like to give me pointers that would be much apperciated. :fingers-crossed:
Edit: Doing a repo sync right now.
Click to expand...
Click to collapse
Good luck Jon ! Hope it builds properly, probably have to change kernel ?
Sent from my ADR6425LVW using Tapatalk 2
I've been working on it on and off today. You have to bring in the device trees and kernel, and there's some recent commits in CM10 that were breaking things. I got a successful build earlier, but I haven't flashed it yet.
Sent from my ADR6425LVW using Tapatalk 2
mjh68 said:
Good luck Jon ! Hope it builds properly, probably have to change kernel ?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the support, and yea i was thinking i would have to change something with the kernal as well. I would probably use Funky Kernal if i figured it out.
shrike1978 said:
I've been working on it on and off today. You have to bring in the device trees and kernel, and there's some recent commits in CM10 that were breaking things. I got a successful build earlier, but I haven't flashed it yet.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Alright, i got it to build so far. Im wondering how you add commits into it though. Also do you think it would be safe to test being S-OFF?
shrike1978 said:
I've been working on it on and off today. You have to bring in the device trees and kernel, and there's some recent commits in CM10 that were breaking things. I got a successful build earlier, but I haven't flashed it yet.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Nice man I'm super excited for this to maybe come to life
Sent from my ADR6425LVW using xda app-developers app
OK it appears to be building right now. I'll probably leave it to build all night and hope for the best unless of course it stops.
Edit: It may fail because im getting low on space. If that happens though ill probably just extend my linux partition.
Edit2: It failed, tried to fix it, building again.
Sent from my Rezound fueled by jelly beans.
Ok it stopped building with the same result does anyone know about this? "make: *** [/home/jon/android/Pacman/out/target/common/obj/APPS/Bluetooth_intermediates/classes-full-debug.jar] Error 41"
Edit: I think it was just some files that went bad during the repo sync. Trying to brunch again.
Edit2: Still wont build
jon7701 said:
Ok it stopped building with the same result does anyone know about this? "make: *** [/home/jon/android/Pacman/out/target/common/obj/APPS/Bluetooth_intermediates/classes-full-debug.jar] Error 41"
Edit: I think it was just some files that went bad during the repo sync. Trying to brunch again.
Edit2: Still wont build
Click to expand...
Click to collapse
That build error is from a commit in the Bluetooth app package. I'm not booted into my build system at the moment, so I can't check for it.
shrike1978 said:
That build error is from a commit in the Bluetooth app package. I'm not booted into my build system at the moment, so I can't check for it.
Click to expand...
Click to collapse
Well when i looked at it i think it was BluetoothMnmSms.java or something like that. I also couldnt repo sync until i deleted that file and some other ones. If you want i can try to build again and give you a log of it.
There's going to be more involved than just pulling repos and brunching. We'll need to set up a pac_vigor build target for our phone because the cm_vigor target only builds the CM10 parts. I'm just playing it by ear at this point, but I'm not going to be able to mess with it any more today.
shrike1978 said:
There's going to be more involved than just pulling repos and brunching. We'll need to set up a pac_vigor build target for our phone because the cm_vigor target only builds the CM10 parts. I'm just playing it by ear at this point, but I'm not going to be able to mess with it any more today.
Click to expand...
Click to collapse
I knew there was gonna be more work then that. I might look more stuff up when I actually get back to my PC.
Sent from my Rezound fueled by jelly beans.
Noooo! I will not let this thread die! This is like a flashers wet dream.
Sent from my Rezound using xda app-developers app
Ohschit said:
Noooo! I will not let this thread die! This is like a flashers wet dream.
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
I'm still gonna be working on this. Just haven't had a chance in a few days.
Sent from my ADR6425LVW using Tapatalk 2
Ohschit said:
Noooo! I will not let this thread die! This is like a flashers wet dream.
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
Lol. Ive been liking sense lately but if strike gets this to work ill probably switch back to AOSP.
@strike How would you go about making a build target for our device?
jon7701 said:
Lol. Ive been liking sense lately but if strike gets this to work ill probably switch back to AOSP.
@strike How would you go about making a build target for our device?
Click to expand...
Click to collapse
We have to mod some makefiles and make a device specific makefile and overlay. It should all be in the vendor tree..mostly in vendor/pac/ and vendor/pa/. I've made progress, but I still don't have it building.
For the record, the way I'm planning for this to work is if I get it working, I'll send it to my S-ON tester to make sure it works. Once that's established, I'll flash it myself to make sure it doesn't brick S-OFF. Then, I'll send out a few more PM's for testing and push my new vendor tree to github. When all is said and done, I'll get up with the PAC-Man team and see if we can get permission to release this thing publicly (once we also have permission from Chad to release his JB stuff as well).
If anyone else gets it working before me, I'd recommend a similar procedure...we don't need any bricks coming out of this if we can help it. There shouldn't be any since we're using Chad's JB device trees, but you can't be too safe.
Update: I think I have it. It's building now. I'll hopefully be able to get a test build out to my S-ON tester this evening.
Anyone using the EVOLTE to stream music to their cars head unit and getting track information/cover art to the head unit? If so, what ROM are you using?
I have tried stock, OMJ, CM10, and CM10.1 ROMs. CM10 is giving me track information but no album art. All of the others only play the media with no track info and no cover art. Also, CM 10 only works with Apollo as the media player and not with any other players. Apparently the ROM needs to support AVRCP 1.3. The EVO 4G LTE only supports AVRCP 1.0 according to bluetooth.org. With the phone having Bluetooth 4.0 the hardware will support AVRCP 1.3 or 1.4.
I have a 2013 Ford Escape with MyFord Touch.
Thanks!
Would love to know this as well, I have never got any info on my JVC head unit. Used to run Mean Rom and now MeanBean.
Anyone know how to upgrade the needed files. I would give money for that to be fixed.
lawnguy said:
Anyone know how to upgrade the needed files. I would give money for that to be fixed.
Click to expand...
Click to collapse
I do have some patches from CAF for this, however not sure if it works. Also these patches would only work on aosp since you would be changing source files not precompiled files.
Sent from my EVO using Tapatalk 2
So what do you suggest? And, no way to fix it in sense? Or is that just heavy coding?
lawnguy said:
So what do you suggest? And, no way to fix it in sense? Or is that just heavy coding?
Click to expand...
Click to collapse
Honestly I've never done much with sense roms not saying it can't work. Maybe one of the sense rom devs would have a better idea.
Sent from my EVO using Tapatalk 2
Well, if you decide you wanna tackle this I'm down to help in whatever way I can. I assume the new release coming out will have it. So maybe there's a place to grab the needed files from? But, either way contact me and ill dig into it with some help and guidance....
thicklizard said:
I do have some patches from CAF for this, however not sure if it works. Also these patches would only work on aosp since you would be changing source files not precompiled files.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Are these patches in Komodo? Or are they available elsewhere?
Thanks
beaker77 said:
Are these patches in Komodo? Or are they available elsewhere?
Thanks
Click to expand...
Click to collapse
They are all rom side patches. Later today I'll upload them here
Sent from my EVO using Tapatalk 2
thicklizard said:
They are all rom side patches. Later today I'll upload them here
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Great! I look forward to trying them out.
Here are the patches if any one wants to look over them
http://db.tt/VWq7I9iV
http://db.tt/31iLaxhE
Sent from my EVO using Tapatalk 2
thicklizard said:
Here are the patches if any one wants to look over them
http://db.tt/VWq7I9iV
http://db.tt/31iLaxhE
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Pardon my stupidity but this get installed in ADB correct? Thank you!
beaker77 said:
Pardon my stupidity but this get installed in ADB correct? Thank you!
Click to expand...
Click to collapse
No, these are the additions that need to be made in source. It's why I don't think it can be done in sense but maybe it's some xml editing could do it
Sent from my EVO using Tapatalk 2