Hi,
Just to share, I tried to install the wireless charger in the phone but didn't work for me, I just managed to destroy the Palm circuit and my phone USB.
Wireless Charger
After installing it worked for 2 seconds and I ear some kind of buzzer and it just stopped working.
If you try to do this don't destroy your phone like me I can charge phone and all but no usb, so no new firmares, no new kernels, etc
Give for repair,,
Sent from my WT19i using xda premium
I've tried to make my own OTG cable - same result as you
Thanks For Sharing
Sorry for You Loss
I'll Keep that in Mind since I can't leave any electronic device away from my fingers
just keep in mind that there's enough power in usb to burn your phone's elecronics
Related
Hi everyone I just have a question, Is my USB Broken? My USB Data connect doesn't work unless I just keep have to changing the position, Sometime if i put it down it only charges , no USB debugging or anything, When I put more force I get the whole mounting SD and I could use flahtool, but my Charger works flawlessly... It has always chargede my phone .. Is it my USB side not working, or is it just my cable ?
Try a different cable. If it works, great problem solved. If not, most likely a broken usb port.
Sent from my X10i using xda premium
I got nearly the same Problem: my cable at home fits perfect (I can even shake my phone) - but if I use the cable I have at work it always reconnects only if I switch a Song of touch the screen - so I bei it is the cable
Sent from my X10i using XDA App
RQ-1 said:
I got nearly the same Problem: my cable at home fits perfect (I can even shake my phone) - but if I use the cable I have at work it always reconnects only if I switch a Song of touch the screen - so I bei it is the cable
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Same
Sometimes i accidently drop the phone while charging and that may cause problems with usb cable as internal cables may be damaged- now everytime i move the cable it resets the connection with computer...
My poor X10! Will look after it from now on!
I had the same issue and thought my USB port was bad however when I plugged in my bluetooth charger (also micro USB) it charged my phone.. I bit down a little bit on my usb** cable end to give it a tighter connection and voila.. works perfect now.
** I am not responsible for any broken teeth or accidentally swallowed USB cables, nor am I responsible in general
It turns out the micro-USB standard was designed in such a way as to put the parts that tend to wear out quickly in the cable rather than the device connector. This was done to maximize the number of connects/disconnects possible in the lifetime of the jack. This probably explains why cables stop working over time in some cases. (Perhaps the x10 is particularly sensitive)
Sent from my X10 using XDA App
Great suggestion! I seem to have revitalized my original cable (for charging anyhow, haven't tried connecting to the computer) with this technique. I substituted a pair of needle nose pliers for my teeth, though.
skanman911 said:
I had the same issue and thought my USB port was bad however when I plugged in my bluetooth charger (also micro USB) it charged my phone.. I bit down a little bit on my usb** cable end to give it a tighter connection and voila.. works perfect now.
** I am not responsible for any broken teeth or accidentally swallowed USB cables, nor am I responsible in general
Click to expand...
Click to collapse
Sent from my X10 using XDA App
Yah I have narrowed my search to this error mine is doing the same thing.
Sent from my X10i using XDA App
try using a different USB cable, or else try to clean the place where usb connects the phone port. Some dust or sticky material might create hindrance.
Hi.. yesterday my phone randomly displayed this message and the battery icon started flashing..... I've tried new rooms and kernals also used a cleaning script but still happens its fuking annoying.... any ideas ???
Sent from my GT-I9100 using XDA
Was it plugged in? Also, this should have been posted in the Q&A section.
no its not plugged in. It thinks its charging via usb
Sent from my GT-I9100 using XDA
I always get that notification when i am charing my phone in my car and i turn the ignition off. I think the line gets a spike, because all the other equipement shuts down. Never had on USB charging or regular charger. So probably your power source isn't stable.
This has happened to me a few times. I purchased a longer usb cable from ebay but for some reason, I got this message also. Once I switched to a belkin cable or the cable included with the phone itself, all was fine. So it could be a faulty cable - or you may just need to reset to stock and go from there.
its not a charging problem its when the phone is disconnected
Sent from my GT-I9100 using XDA
mxn- said:
its not a charging problem its when the phone is disconnected
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Then likely its the fault of the USB port, or the battery. I'm no expert on hardware issues however, I do know that moisture buildup under the battery cover or in the port has the potential to cause this issue. Try leaving the phone in a bag of rice for a few hours. If that doesn't work, you may have to think about sending it to Samsung for repair.
Seriously this question have been asked for zillion times, try to use search it help!
All you have to do is to clean ur usb port, i used a needle scratched it abit and moved the center piece back to the middle, this should help, if it didn't you need to change ur USB board
Already discussed here, Google search would have retrieved it:
http://forum.xda-developers.com/showthread.php?t=1520528
HI boys
i have bought one phone from second hand for good price
phone look like new without any problems working good
but i mean that there is USB port problem, charging OK , but when i plug the charger in first time phone was totally without enegry ( it shows yellow triangle near the battery icon ( but only for few minutes)
in this case when i connect phone to PC there is only charging and nothing more
already trying USB debug mode on/off , download mode when i connect windows just says unsupported device
iam trying 3 SGS2 , 3 PC and also 4 USB Cables
usb JIG working good it go to download mode and earse all data counter without problem
is there any good specialst who can help me ? i want to order USB flex cable part and chanage, it is enought?
many thanks
If it's a persistent problem try cleaning it out with a toothbrush or small brush?
Sent from my GT-I9100 using xda premium
Or try to push the central connector up a bit. That may also help add these things are a source of common problems.
Sent from my GT-I9100 using xda premium
already done , but without luck
iam not stupid, i had 3 sgs2 and this is first problem like this,
in service they told me that i have to pay for diagnostic first,( so no good )
iam without waranty, but if i chanage usb port flex cable iam not shure if this one can fix,
as i didnt know about history of phone ( maybe was water damage ?)
but all working like charm, phone looks like new( except USB connection)
so why the USB JIG working ? which pins is connected via JIG?
Also charging is good , some circle can be broken?
i will try to risk order one flex usb connector for sgs2
http://www.parts4ipods.com/epages/es115703.sf/en_GB/?
it cost just 7 GBP free psotage to worldwide
i hope that i will not more destroyed my phone , dissassembly looks no good ...
Disassembly doesn't seem like that hard a job to do yourself. I'd rather do that than pay for it
Sent from my GT-I9100 using xda premium
i did c the same on my phone while chargin
but i did not harm my phone in any way
it jus shows for couple of seconds and den it comes back to normal
yes iam technican engeneer , but iam afraid about that , if i broke some more thing in, than can be more expensive repair
and iam not sure that is this flex cable problem
but better than soldering someting on motherboard
Hi ,
I have Samsung Galaxy s3 which was working fine for last 2 months.
Today when i connected my charger it showed as "USB connector connected" same message that comes when i connect OTG cable.
Hence my S3 is unable to charge.
Again my charger is recognized as OTG cable.
It is not rooted its a stock device. Please help. Shall i go to Samsung Service Centre ?? PLs suggest .
Turn off your phone and try plug it again. See if it charging or not.
Sent from my GT-I9300 using xda app-developers app
Sent from my GT-I9300 using xda app-developers app
Hello, struggling to find anything similar to the issue I am having, sure one of you more tech savvy folk could help.
My car a 10 plate golf has a built in media port through which I can charge and use my media devices, however since receiving my S3 I cannot get it to work. The in car system display states 'media device not recognised.'
To work around this I bought an aux jack to jack and plugged in to it that way and this works fine whilst the phone is disconnected. However when I connect the phone to the usb to charge, it automatically defaults to media device not recognised and disconnects the aux.
My old phone had the same issue (HTC desire) however this could be set to usb charge only which would prevent the car system from trying to use it as a media device simply providing charge.
However, I do not appear to have this option on my shiny S3.
Does anyone have any ideas on how I could work around this? I do not really want to charge the phone using the cigarette lighter socket as this has fried other devices in the past.
Many thanks.
Motherboard Gone
Arsaw said:
Turn off your phone and try plug it again. See if it charging or not.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hi, Tnx for your reply.
I already tried that.
Following is all what i did :
1. Rebooted couple of times
2. Removed Battery sim card everything
3. Changed my charger and connected with a new charge
4. Tried to connect to PC via usb (USB Charging), but did not work
5. Also a factory reset when nuthing worked
After all the hard work, i had to visit Samsung service and they are saying motherboard will be replaced.
I still dont know how did motherboard got busted, but anyways its free of cost so its cool.
Thanks
QC problem I think. Glad you solved the problem. Enjoy
Sent from my GT-I9300 using xda app-developers app
Tried that, still no joy. It is charging.
Sent from my GT-I9300 using xda app-developers app
Today when i connected my charger it showed as "USB connector connected"
Click to expand...
Click to collapse
Potentially the cable or charger is defective, try another one and see if it repeats.
The system recognizes the OTG-cable through a certain pin layout which might be triggered by a defective cable.
Also: you didn't change the ROM or any significant other part (e.g. Kernel) before it first appeared?
@buftybasher: Thread hijacking is considered very rude. Your issue has nothing to do with his.
however since receiving my S3 I cannot get it to work. The in car system display states 'media device not recognised.'
Click to expand...
Click to collapse
That's because the S3 doesn't have a mass storage (UMS) mode, only a mode specially designed for mobile devices, the so-called MTP.
Most probably your car simply is not capable of supporting this 4-year old standard and relies on the very old mass storage mode with FAT32 partitions.
If you store your music on the external SD card, you might want to take a look at the Easy UMS APK here on Xda, it should make your car be able to access the storage. (Not all kernels support the feature)
it automatically defaults to media device not recognised and disconnects the aux.
Click to expand...
Click to collapse
If you are any good with a soldering iron, you could open up a USB cable and cut off the 2 middle pins (D- and D+) which are used for data, then solder the corresponding resistance for 1Amp or 0.5Amp charging to the phone's side of the cord.
Voila: charging-only cable.
I am having chatting issues. This just started happening when I woke up this morning. I forget if the micro USB is supposed to click when you plug it in the phone to start to charge. When I plug my phone in, I don't get any indication that the cable is locked in. Also if I move the cable ever so slightly. The phone will stop chatging. The USB cable feels like its gonna come out if I move the phone in any way.
I don't have any spare micro USB cable so I wanted to know if you guys are think this is a hardwarw problem or possibly if just the cable is messed up. Im hoping its the latter because I am not trying to replace my phone.
Also have any of you guys had this problem? Thanks
This isn't a question and answer forum.
Could be the cable. Different cables fit in differently. I personally use my kindle fire hd cable cuz it clicks in snugly with my htc charger.
Sent from my HTC One using xda premium