Mobile IP registration error 67
OK heres my situation. Last night right before work I flashed jokers jb cm10 rom over a factory reset of cm7 and all was good, except google play kept trying to download random things in my pocket and heating up while I worked. As a reflex I turned on airplane mode to cool it down and save battery. And just like that I had absolutely no data whatsoever. I tried reflshing cm10. Nothing. I tried the data fix. Nothing. I flashed peetrs v4, twice. Nothing. I had to wait my whole shift to get home to sbf this thing to new. I went on the compendium and downloaded 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN_198_7-CM-release-keys-signed-Sprint-US.zip. I installed the drivers unzipped the sbf and opened rsd-lite and waited for it to connect. When I flashed it everything went smoothly until it said manually power on the device. It did not boot for 5 mins. I then went on a stupid flashing frenzy. I flashed derpunlock then I flashed the 198_7 radio and it wouldnt boot. In my final act of noobishness I flashed peetrs unlocktwrp sbf . Now it will instantly power off when I boot it with vol- and if I boot it with usb attached it will go into rsd mode. This rsd mode is semu functional. It begins to flash but gets gets stuck on switching modes (i can manually switch by doing a battery pull) and bp passthrough is stuck on 0. I can get into fastboot if I hold volume+ while booting. Any help is greatly appreciated (unless it involves permalocking my bootloader).
Sent from my Nexus 7 using Tapatalk 2
Hmm, I am trying to understand your situation, but it's not easy.
Did you wipe data after flashing full 198_7 sbf?
This all thing after that full sbf flashing, looks to me more like some usb problem or what? Did you try different computer?
Do you have failed to boot 3 now?
If you flashed that unlock sbf with twrp, you should go directly in recovery and wipe data and you can try to flash some other rom.
I was unable to boot after 198_7 so I was not able to wipe data. I tried different usb ports, does the same thing. It says failed to boot 3 now. How do I get into recovery as the menu at boot is not available (screen shuts off as I try to scroll through the options) fastboot and rsd kinda work.
Sent from my Nexus 7 using Tapatalk 2
So try to flash full 198_7 sbf and write me, how it goes.
1st screen
SVF : 108:1:2
Failed to boot 3
Starting RSD mode
Flashing now
Now says
SVF : 108:1:2
Failed to boot 3
Starting RSD mode
SVF : 106:1:2
sec_exception: b655, exec, eb
I then powered it off to save battery as im sure its not charging
I saw this posthttp://forum.xda-developers.com/showthread.php?p=29585149 in another similar thread, how do I use fastboot to flash jokers v4 recovery?
Sent from my Nexus 7 using Tapatalk 2
Hmm, why failed to boot 3?
Could you try to decompile 198_7 sbf with sbf codec and try to flash stock recovery (CG58) with fastboot? Do not unlock yet.
peetr_ said:
Hmm, why failed to boot 3?
Could you try to decompile 198_7 sbf with sbf codec and try to flash stock recovery (CG58) with fastboot? Do not unlock yet.
Click to expand...
Click to collapse
I do not know how to flash with fastboot. I have to go to work all night so I cannot try until tomorrow. Thank you for all your help thus far.
Sent from my Nexus 7 using Tapatalk 2
Ok. When you will have some time, try to get familiar with the fastboot and decompiling sbf. There are some readings over here. Could you? Everything will be much easier to test then.
Ok I was finally able to decompile the sbf and I succesfully flashed the stock recovery
Good. Really.
And what's the status of your phone?
same as before still not booting, the fastboot cmd message said
sending 'recovery' (8192 KB)... OKAY ( 1.126s )
writing 'recovery' ... OKAY ( 0.954s )
so I assumed it was successful.
Yes it most probably was successful.
Are you absolutely sure, that you didn't flash any sv2 file?
Try to flash boot.img from the decompiled sbf.
I just looked in my downloads folder and to my horror I see 2.3.5sv2_198_7_radio.sbf
Would that have permalocked my bootloader?
Hmm, why am I writing that big red warning there?!
Yes. Your bootloader is permanently locked!
Oh, oh, oh.
No problem to unbrick that, but it's locked.
damn, all i wanted was to flash the radio. in my haste i must have ignored the warning assuming radios had nothing to do with bootloaders. Im gonna miss your hybrid rom
Oh well, this is why I have a Nexus 7.
should i follow this guide?
http://forum.xda-developers.com/showthread.php?t=1797787
Ok, let's forget this BIG mistake.
Actually I have locked version of my rom now.
If you are familiar enough with decompiling, I would suggest something different for you.
Recompiling USC_19 sbf only with boot.img, recovery.img, cdrom and system just to make it quickly reflashable.
Do you think that you can make it?
Or I will make it, but this would take long. (bad uploading speed)
is that the same thing in your thread (http://forum.xda-developers.com/showthread.php?t=1798145) under "others"
Yes, except, that one is not containing system, but as I think about it, you should have 198_7 system installed right now, so it should boot after flashing this boot, recovery and cdrom sbf. Or you will have failed to boot 4, then you will have to make the same sbf with USC_19 system. Don't forget to wipe data.
now the battery finally got too low to flash, so I have to do the usb trick to charge it. will try again in an hour or so
Ok.
Related
So I was walking my girlfriend through rooting her new Evo3D, and we couldn't get the phone to get past the 'MI' logo, so I figured it was a kernel thing. After four kernels and two versions of MIUI I realized that it wasn't the issue, it was the hboot.
She didn't back up, she has only had it since last night. I now know what I need to do to flash the ROM, but how can I get her back to stock so I can get the app needed?
Any help?
She has HBOOT 1.5, right?
Go back to the folder where you did all the rooting. Get the stock MIUI kernel (boot.img from the flashable zip) and place it in that folder. Open up a cmd and navigate to that folder.
Boot her phone into fastboot mode. (Vol down + power while the phone is off. Hit power button to select fastboot once it goes into bootloader) Plug the phone into the computer via USB
Type 'fastboot flash boot boot.img' in the kernel. If it successfully flashes, you are done! MIUI should boot up now that it has the appropriate kernel. You will need to do this for any ROM you flash.
As long as you have a recovery, just flash whatever rom you want through fastboot and the kernel will stick.
Or just download a stock rooted rom and flash that the same way you just tried to flash MIUI. It will work since you still have the original kernel.
Sent from my PG86100 using XDA App
flonker said:
As long as you have a recovery, just flash whatever rom you want through fastboot and the kernel will stick.
Or just download a stock rooted rom and flash that the same way you just tried to flash MIUI. It will work since you still have the original kernel.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Well, ROM's cant be flashed through fastboot. The ROM is flashed through recovery. Then you go to fastboot and flash the kernel with my guide above. After that, everything should be working fine.
yousefak said:
She has HBOOT 1.5, right?
Go back to the folder where you did all the rooting. Get the stock MIUI kernel (boot.img from the flashable zip) and place it in that folder. Open up a cmd and navigate to that folder.
Boot her phone into fastboot mode. (Vol down + power while the phone is off. Hit power button to select fastboot once it goes into bootloader) Plug the phone into the computer via USB
Type 'fastboot flash boot boot.img' in the kernel. If it successfully flashes, you are done! MIUI should boot up now that it has the appropriate kernel. You will need to do this for any ROM you flash.
Click to expand...
Click to collapse
Hopefully this works! Shes at church right now but I will have her do this ASAP and I'll report back!
(Awesome response time BTW)
Roms are flashed through fastboot just by loading your recovery into fastboot.
I never flash roms and kernels separately. Just go into fastboot, load your recovery, and flash as you normally would.
Sent from my PG86100 using XDA App
I had something similar when flashing MIUI. if you boot the recovery.img from fastboot it should work. you may want to re download just in case of a bad download.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
I'm having the same problem as epicchase. have attempted to flash miui many times. at first i tried to do it through my recovery. it didn't work. then i tried to use the fast boot method and flash it from the recovery that i opened from fast boot. i'm quite frustrated. it just wont boot miui, is it the kernel, i'm new to rooting in general but i think i know what i'm doing. i have spent who knows how many hours trying everything i can. i tried flashing the boot.img and the ROM separately. I have successively flashed android revolution hd, but that's no fun, its nearly the same as the stock ROM any suggestions would be appreciated. it boots but i guess it must be a boot loop but idk all i know is it freezes in the middle of the boot animation.
ps. i am rooted using the htc official method (unfortunately) and am s-on)
redstrike120 said:
I'm having the same problem as epicchase. have attempted to flash miui many times. at first i tried to do it through my recovery. it didn't work. then i tried to use the fast boot method and flash it from the recovery that i opened from fast boot. i'm quite frustrated. it just wont boot miui, is it the kernel, i'm new to rooting in general but i think i know what i'm doing. i have spent who knows how many hours trying everything i can. i tried flashing the boot.img and the ROM separately. I have successively flashed android revolution hd, but that's no fun, its nearly the same as the stock ROM any suggestions would be appreciated. it boots but i guess it must be a boot loop but idk all i know is it freezes in the middle of the boot animation.
ps. i am rooted using the htc official method (unfortunately) and am s-on)
Click to expand...
Click to collapse
Did you do a full wipe before you flashed? Find Virus's Superwipe tool (.zip), boot to recovery with fastboot, flash the superwipe.zip, then flash MIUI.
Twolazyg said:
Did you do a full wipe before you flashed? Find Virus's Superwipe tool (.zip), boot to recovery with fastboot, flash the superwipe.zip, then flash MIUI.
Click to expand...
Click to collapse
I will try that tonight thanks very much in advance
Sent from my PG86100 using XDA App
Twolazyg said:
Did you do a full wipe before you flashed? Find Virus's Superwipe tool (.zip), boot to recovery with fastboot, flash the superwipe.zip, then flash MIUI.
Click to expand...
Click to collapse
well it didn't work it did the same exact thing. I've been giving it about 10 mins to attempt to boot is that long enough? I'm new to non sense roms I've only ever used sense, is there something I'm forgetting to do that is different for non sense roms. *frustration* (and i thought i was beginning to understand this)
---------- Post added at 09:43 PM ---------- Previous post was at 08:46 PM ----------
okay well i tried to flash cyanogenmod 7 still no dice. I must be an idiot, sorry for being a noob.
this is what im doing.
im placing the .zip on root of my sd card. then opening my cmd.
i then type " cd c:\android" (i saved the recovery image in a folder named android) it says
"c:\android" just as it should i then type "fastboot boot recovery.img"
it restarts my phone in recovery
i press install .zip from sd card then click wipe cache and dalvik cache it goes and does its work
i then select the superwipe.zip it says flash compete however it says error or something but i just kind of ignored it.
i then select my miui.zip that i got from www.miui.us
i then select install .zip files the first thing that comes up is "md5 check fail- ignoring" and the continues and flashes (i have no clue what that part means but i continue anyway)
i select reboot and it starts to boot my phone i get the white screen with green htc.
i then get the miui boot animation for anywhere from 2-5 seconds and then it freezes.
i sit and nearly just stare at it and the clock. i wait at least 5 mins but have waited up to 30 mins.
the boot animation never restarts i just freezes there making me think it is not a boot loop (however the definition of an actual bootloop is slightly vague to me.)
anyway thanks for reading and if you have any suggestions i will be very happy for now im just gonna run my android revolution hd rom.
If superwipe isn't working, fastboot to recovery, go to the wipe menu, not install a zip, wipe dalvik, cache, and factory reset. Don't do the factory reset in android, do it in recovery. I'm guessing you got a corrupt download of superwipe, I would redownload it and try it again if I were you.
Try using this one.
Twolazyg said:
If superwipe isn't working, fastboot to recovery, go to the wipe menu, not install a zip, wipe dalvik, cache, and factory reset. Don't do the factory reset in android, do it in recovery. I'm guessing you got a corrupt download of superwipe, I would redownload it and try it again if I were you.
Try using this one.
Click to expand...
Click to collapse
Yayyyy perfect thankyou sooooo much I'm speechless thank you so much!!! it flashed like it was mardi gras.
Sent from my HTC EVO 3D using XDA App
this process doesnt work for me, i have been trying it for 2 mnoths..No avail, is there anyone who can make this work?
EVO 3D HBOOT 1.5
rcquartz said:
this process doesnt work for me, i have been trying it for 2 mnoths..No avail, is there anyone who can make this work?
EVO 3D HBOOT 1.5
Click to expand...
Click to collapse
What didn't work for you?
rcquartz said:
this process doesnt work for me, i have been trying it for 2 mnoths..No avail, is there anyone who can make this work?
EVO 3D HBOOT 1.5
Click to expand...
Click to collapse
make sure your phone is actually rooted if it is hboot 1.5 make sure to use htvdev.com
make sure you have a recovery image
I HAVE A AT&T atrix rooted and unlocked i was running cm7 nightly based rom [ not released yet been running it for 3 days it is stable and i wanted to run some benchmarks soo i rebooted into recovery wiped cache wiped dalvic then it said back button is disabled OMG soo i wasnt crying yet scrolled up and then a string of numbers came up and i went to the top of the screen but it never changed i gess i must have selected the first option THEN It started to partion internal storage omg so i yanked out the battery it didnt even give me an option just did it soo now when it boots it gives a list from 1 threw 14
says pwr reason
os will boot in 5 sec press any button
1 rsd
2fastboot
3nvflash
4 bp hw bypass rsd
6 bp hw diag boot ap
7bp sw bypass bp only
8bp sw bypass rsd
9android recovery---doesnt work
10boot android no bp
11 device uid
12console
13 early usb enueration
14 bp tools
----------------------------------
vol up to sel. vol down
for next choice
current choice?
when i try to enter recovery it says MAJIC VALUE MISMATCH
what do i to i pulled out the battery cause i knw it will go dead soon if i didnt
i think it messed up the pds partion i tried to fastboot flash pds pdsfix.img but it doesnt load it or somthing man i just want my phone back
i have 2 nandroid backups on my sd card but i dont know how to use them without recovery working /?/
Reflash the pudding sbf that you used to unlock your phone in the first place
Sent from my MB860 using xda premium
Try flashing Romracers recovery but via fastboot. Download the .img file in his thread and fastboot flash it.
i think i fixed most of it i went into rom
manager widget (because app drawer wouldnt open touch screen borked and all the other stuff above was on screen when i first turned it on
so i flashed cwm again through rm
then rebooted recovery then went into advanced restore flashed /restore pds
then rebooted touch screen worked so then i went into recovery and flashed full nand restore (i had 2 backups saved +2 roms on zip +romracers recovery on zip
after that now i need a boot image cause all thoughs options are still on first screen at startup ....let me see here....
I think the reasons are explained in this thread. And probably it's not gonna change. Just be carefull not to get a hard brick.
---------- Post added at 11:56 PM ---------- Previous post was at 11:53 PM ----------
Here exactly:
Pudding/4.5.47-BL is also a special for another reason. Although it also does not like Odm[1] to be 0x00010003 (like 1.8.3/pre) and displays error 0x1000, it lets you escape. It gives you a really nice menu of options so you can flash something higher (only 4.5.91 right now) if you want to stay locked, or it lets you enter fastboot and 'oem unlock.' Then, in the future, even if it notices this 'bad' fuse is burned in Odm[1], because you have the Unlocked fuse burned in Odm[0] it gives you a pass, and boots anyway. So flashing Pudding or something+Pudding after 4.5.91 might give you a little heart attack, but in the end it should be harmless.
Click to expand...
Click to collapse
No it was not a "HArd brick it would boot all the way up and charge when phone was on but the PDs partion was messd up. I reflashed the PDs.img and it fixed it
Sent from my MB860 using xda premium
http://forum.xda-developers.com/showthread.php?t=1164551&page=2
After weeks of reading and being scared to death of unlocking and flashing, i finally decided to give it a shot this morning. I unlocked with no problems, then flashed MROM-CM7, thats when things went downhill. I followed the instructions to a T, formatted everything, etc, got stuck at the red "M". Tried several times with no luck, tried to restore my Nandroid backup, got the flashing "android" after the red M screen. Now I have apparently screwed something else up because I cant get in to android recovery (CWM?) now. It never did show it as cwm, just android recovery. Atrix MB860 2.3.6, I am afraid it is a brick at this point. Tried to load recovery again to try to fix it, but I cant get recovery.img to flash via fastboot, just gives an error, "Cannot load", wish I had just left it alone this morning. Am I screwed or is there something else I can do/try?
fastboot?
Have you tried flashing a recovery.img file through moto-fastboot?
You need to update your recovery with one from this thread:
http://forum.xda-developers.com/showthread.php?t=1204500
donschjr said:
You need to update your recovery with one from this thread:
http://forum.xda-developers.com/showthread.php?t=1204500
Click to expand...
Click to collapse
That is the recovery I used, gives me the error can not load
Edit: apparently CWM didnt load the first time, I reloaded it thru RSD and re-flashed mrom and it worked! thanks to everyone on this forum, search and google were my friends!
paravorheim said:
Have you tried flashing a recovery.img file through moto-fastboot?
Click to expand...
Click to collapse
mikerobrew said:
That is the recovery I used, gives me the error can not load
Click to expand...
Click to collapse
Try what paravorheim said but do:
Moto-fastboot erase recovery
Just to make sure you recovery partition is cleared before you flash a new one
Sent from my MB860 using XDA
Bert.C said:
Try what paravorheim said but do:
Moto-fastboot erase recovery
Just to make sure you recovery partition is cleared before you flash a new one
Sent from my MB860 using XDA
Click to expand...
Click to collapse
I was using fastboot, but in my haste, I realized I was not in the correct directory, hence the error. When things go wrong, it is always best to slow down, not speed up!
My Atrix 4G is unlocked and I have perma CWM installed, used it for a long time with GB pudding and I wanted to try out a CM7 based ROM.
I've been trying to install MROM with no success at bootup it just stays on the Motorola Logo with the Unlocked. I thought maybe it was doing something and left it for 10 mins with no change.
Any suggestions on what other things I could do? I've tried clearing the cache/dalvik and wiping data/factory reset before installing.
Thanks,
LF4
Try wipe factory after install rom
Sent from my Atrix 4G using xda premium
Go to mounts and wipe system and osh. Flash rom. Will probably sit at boot.... Pull battery and flash rom again without wiping anything then should work
I tried factory wipe after the install.
Also formatted system/osh installing reboot and installing again.
No luck on either one. I was selecting install from zip and would navigate to the zip file downloaded from the link on the xda dev post here. Which is what I thought was the correct way of doing things.
The install takes about 10 seconds before it says it's complete and the boot I'm not sure how long to expect it before I need to pull the power and try again.
Are you sure you downloaded the correct zip file? Should be around 100 MB or so but seems if install is done in 10 seconds that you only have downloaded the kernel or something like that.
You can get MROM at montuori's website here
take the latest build (not the update, the normal version so without *-update.zip)
jorno88 said:
Are you sure you downloaded the correct zip file? Should be around 100 MB or so but seems if install is done in 10 seconds that you only have downloaded the kernel or something like that.
You can get MROM at montuori's website here
take the latest build (not the update, the normal version so without *-update.zip)
Click to expand...
Click to collapse
Yeah that is why I mentioned it only takes a few seconds to install. I did download the full Atrix-MROM-20121111.zip which is 119MB in file size. MD5sum is correct so the file isn't corrupted.
I've tried all different combinations to get this installed. I was running pudding 4.5.91 would that affect the install of MROM?
Might be time to upgrade your recovery. Last version for official clockworkmod no touch mode is 5.0.2.0, touch version is 5.8.1.8 (http://www.clockworkmod.com/rommanager)
jorno88 said:
Might be time to upgrade your recovery. Last version for official clockworkmod no touch mode is 5.0.2.0, touch version is 5.8.1.8 (http://www.clockworkmod.com/rommanager)
Click to expand...
Click to collapse
Thats what I was thinking. So I can just RSD flash the recovery-clockwork img to upgrade it do you suggest the touch or no touch CWM?
flashing a recovery when your bootloader is unlocked is done via fastboot.
i use the touch version myself and am happy with it.
to flash rom you type
moto-fastboot erase recovery
moto-fastboot flash recovery <recoveryname>.zip
make sure you have the motorola fastboot and drivers, to enter fastboot you can either use "adb reboot fastboot" or boot phone with volume down key pressed, when fastboot appears press volume up
stay as far away from rsd if it's not necessary.
My CWM was too old to flash it so I had to update it first then things worked great. Thanks for the help and suggestions I didn't know recovery zips were based on different versions.
Congrats man
I was running fine with BMM. Then I decided to switch to SafeStrap and installed it through the apk. Later I wanted to get back to BMM so I uninstalled safestrap, and just out of curiosity I rebooted it to check if it still starts without the recovery. It didn't. I tried flashing the stock rom through RSD. I had erased my CID a while back. Now the firmware I flashed through RSD, I was unsure which to flash. I tried flashing these firmwares:
9.8.2O-124_SPUEM-14_S7_USASPDRICS01VFGE1007.0R_USASPDRJBRTVFDE_P011 _A011_p2b_S1FF_fb_CFC.xml
9.8.2O-124_SPUEM-14_S7_USASPDRICS01TMOGE1007.0R_USASPDRJBTMDE_P011_ A019_p2b_S1FF_fb_CFC.xml
9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml
I live in India. Both are jellybean firmwares. I read somewhere that asian users can flash eu firmwares. So I went ahead and flashed but none of those boots my phone. I get Motorola logo and then blank screen. I'm using RSD Lite 6.1.6. Can somebody guide me as to which firmware should I flash? I'm having panic attacks since last night... :-|
EDIT: Fixed by booting to BP Tools from the bootloader. This is what happens when your cid is erased. Thank you XDA :victory:
shreyas.kukde said:
I was running fine with BMM. Then I decided to switch to SafeStrap and installed it through the apk. Later I wanted to get back to BMM so I uninstalled safestrap, and just out of curiosity I rebooted it to check if it still starts without the recovery. It didn't. I tried flashing the stock rom through RSD. I had erased my CID a while back. Now the firmware I flashed through RSD, I was unsure which to flash. I tried flashing these firmwares:
9.8.2O-124_SPUEM-14_S7_USASPDRICS01VFGE1007.0R_USASPDRJBRTVFDE_P011 _A011_p2b_S1FF_fb_CFC.xml
9.8.2O-124_SPUEM-14_S7_USASPDRICS01TMOGE1007.0R_USASPDRJBTMDE_P011_ A019_p2b_S1FF_fb_CFC.xml
9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml
I live in India. Both are jellybean firmwares. I read somewhere that asian users can flash eu firmwares. So I went ahead and flashed but none of those boots my phone. I get Motorola logo and then blank screen. I'm using RSD Lite 6.1.6. Can somebody guide me as to which firmware should I flash? I'm having panic attacks since last night... :-|
Click to expand...
Click to collapse
Try this:
Get into fastboot mode,select "recovery",when android lying on his back with a red triangle appears,press vol- and vol+ and select "factory data reset" option.
Sent from my Razr XT910
Try the one..
Blur_Version.982.124.14.XT910.Vodafone.en.EU
Find it on SBF Droid, it should be under Vodafone Germany..
From the E
welder73 said:
Try this:
Get into fastboot mode,select "recovery",when android lying on his back with a red triangle appears,press vol- and vol+ and select "factory data reset" option.
Sent from my Razr XT910
Click to expand...
Click to collapse
I had tried factory reset. It didnt work. I had to boot to BP Tools to boot the phone. When your CID is erased, this happens, reported people on XDA. Thank you for the suggestion anyway