When i try to flash back SPYDERIRD_U.01.26.0_SPD-IRD-21_SIGN_ASIA_RETAIL_HKTW.xml from 65.1.40.XT910.PSHAsiaRetail.en.03 with RSD Lite,it fails several times.
It shows 1/13 flash cdt.bin "cdt.bin" -> Phone returned FAIL.
And "flash failure"shows in AP fastboot menu.
Please give me some solutions on it,i am starting mad on it:crying:
So i guess you're try to downgrade from ICS to GB and that is NOT possible. Flash an ICS Fastboot for your Region to get your Phone back!
Actually i am going to flash unofficial cm9 rom,is that any methods to flash cm9 rom from ics?
Related
I was an idiot. I should've read the instructions and the new software released, but after successfully flashing my phone a few times, I got cocky. I was running greyblur but wanted to update it to the latest official gingerbread FW. I flashed it using CW, but now it's stuck on the load Motorola screen. It'll turn on, show the motorola icon, show GREYBLUR, then just get stuck in an infinite cycle.
I tried leaving it on for a while, about half an hour and nothing worked.
Tried to fastboot, and give it a hard reset but that didn't lead to anything.
Anyways, I've downloaded the FW 4.1.83, tried renaming it to update.zip and running that but it doesn't work..
Can anyone help me out?
IronicUniqueUsername said:
I was an idiot. I should've read the instructions and the new software released, but after successfully flashing my phone a few times, I got cocky. I was running greyblur but wanted to update it to the latest official gingerbread FW. I flashed it using CW, but now it's stuck on the load Motorola screen. It'll turn on, show the motorola icon, show GREYBLUR, then just get stuck in an infinite cycle.
I tried leaving it on for a while, about half an hour and nothing worked.
Tried to fastboot, and give it a hard reset but that didn't lead to anything.
Anyways, I've downloaded the FW 4.1.83, tried renaming it to update.zip and running that but it doesn't work..
Can anyone help me out?
Click to expand...
Click to collapse
Flash a stock 2.3.4 via moto-fastboot
http://bandbinnovations.com/xda/ging...ead-4.5.91.zip
extract boot.img, system.img from the archive and flash via moto-fastboot.
Download moto-fastboot for your OS here:
http://forum.xda-developers.com/showthread.php?t=1138092
Then do the following commands:
moto-fastboot flash boot boot.img
moto-fastboot flash system system.img
moto-fastboot -w
moto-fastboot reboot
This one should boot up without problems
You can upload files to flash i get error in the link to download the 2.3.4 stock
Tavo_an said:
You can upload files to flash i get error in the link to download the 2.3.4 stock
Click to expand...
Click to collapse
http://bandbinnovations.com/xda/gingerbread/Gingerbread-4.5.91.zip
Hi Moto guys
I bought this RAZR. It is a GSM one without operator customizing.
I rooted it normally and tried to update to ICS leak (this one if I remember well).
It didn't work.
Anyway I downgrade back to Gingerbread and tried to flash in recovery the MIUI V4 zip.
It bootlooped.
So I wanted by the same way to downgrade to 2.3.6 again.
It was a fail.
From this, I had the flash failure screen at the beginning and lost the recovery.
Because of a "Battery Low" I made a factory cable and I can access again to the "flash failure" screen.
I found a tuto relating to the same problem than me and tried to apply it.
I downloaded this rom (SPDREM_U_01.6.5.1-167_SPU-15-M2-1-DE_1C.91P_0A.6C_TMDE_CFC_HWp2b_SIGNED.xml.zip) as explained and tried to flash it in RSD lite.
The problem is:
I have no error message, it just stays stuck on "6/11 flash system "system_signed".
I let it several hours, it never passed away this step.
With "Eternityprj_Fla**** script it's the same, it's blocked at "system writing..."
I don't really know if I'm considered to be on ICS or GB. My bootloader version is 0A.75 so I guess ICS one.
Any idea to reanimate this XT910?
Thanks for the help you could bring to me
P.S: I tried these roms since the first fail
-SPDREM_U_01.6.5.1-167_SPU-15-M2-1-DE_1C.91P_0A.6C_TMDE_CFC_HWp2b_SIGNED.zip
-SPDREM_U_01.6.5.1-167_SPU-15-M2-1-FR_SIGNEuropeAustraliaEMEA_USASPDRRTFR_HWp2b_Service1FF_fastboot.xml.zip
-SPDREM_U_01.6.5.1-73_SPU-11-PASS-10_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
-SPDREM_U_01.6.5.1-167_SPU-15-M2-3_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
Since I use XP in a VIRTUALBOX machine, I have an icon with activity on device.
During this operation, the activity on the phone is important
C:\Program Files\Android\android-sdk\platform-tools>fastboot.exe flash system sy
stem.img
sending 'system' (793344 KB)...
OKAY [ 28.541s]
Click to expand...
Click to collapse
As it is to this step, no activity...
writing 'system'...
Click to expand...
Click to collapse
I tried with normal fastboot executable from SDK and erpj-fastboot.exe, no difference.
Is it possible I make something wrong with my factory cable?
I don't think so because it makes my phone booting as I plug it and it writes normally boot.img for example with fastboot.
Your help would be appreciated very much guys ^^
Thanks!
Solved!
I can't explain why but I managed to access recovery even if system flash with fastboot never ended.
I flashed ICS rom and it booted well.
So it's solved even if I can't give explanations.
Thanks anyway.
flash fails...repeatedly
This has been covered extensively, but mine is still screwed up, i rooted the phone with clockwork mod. When the official ICS cam eout, i tried to manually download it. I have unrooted the phone and tried to install ics, it failed. So i tried flashing back to factory because clockwork was still popping up on boot. The flash continues to fail. I have tried using moto-fastboot in command prompt, i ha tried rsd lite with the flash(4 different ones). It keeps failing and i end up in the ap fastboot mode. it takes 2 tries to get the phone to boot normally and occasionally the clockwork boot menu pops up on reboot. Any ideas how to just start from scratch. As seen by the problems i have caused myself, i am a complete amateur here.
A little info, the phone is about 8 months old, rooted it once successfully, it is currently unrooted(i tried to reroot but got hung up in ap fastboot), updated drivers twice, moved the flash files all arounf my computer, using windows 7 64 bit. thanks to anyone who may help
Ok ok ok...
if i have an advice, before flashing, read read & read again.
So now.
Give me more info about your phone(xt910 / xt912 / europe / asia / latam /usa ) ??
Can you rsd to system_signed, or flash it manually through fastboot ?
When you installed ics manually which error did you have?
If you can, try to flash system_signed then reflash the OTA package with official recovery & wipe data. But i guess it wont work. For now i can't help you more without more info.
So tell me all you can and write it clear.
Or try this through rsd lite or fla**** http://forum.xda-developers.com/showthread.php?p=28199183
Sent from my XT910 using xda premium
yes, now ics fastboot file is out, you can easily fastboot to get back.
it is usa...i am downloading the ics fastboot now. I have tried the fastboot method with the latest gingerbread build, and also using the command prompt and flash commands....will let you know
thanks
Flash failed right away....how do i know i have the correct drivers? any other ideas?
I had the same issue when attempting to flash. Make sure you switch to a usb 2.0 port.
After that find the moto-fastboot package and then flash all the files manually using moto-fastboot instead of regular fastboot.
You have to do that for every single file. The file names are in the xml in the fastboot file.
first let me say I do not have a RAZR and have searched. I have a friend who was rooted, tried to unroot and install the OTA JB update. He is now stuck in fastboot. His PC will recognize his phone but doesn't show as available like it should. (I have the Note 2 and mine shows under "computer" when connected). he's tried running the razr utility and it fails then says he's back on original version. He can get into bootloader but not into recovery. He says it back the to AP Fastboot screen and then it says boot failed. He was rooted but on stock. he tried to install the JB update both OTA and through his external SD card. can anyone help? does the razr not use odin?
I don't understand exactly your problem. Would you like to flash stock ROM with fastboot recovery? Then you have to
1) install latest Motorola driver package
2) install RSD lite tool
3) boot phone to fastboot recovery
4) connect USB to computer
5) download fastboot package of you choice, exctract it and choose included xml-file in RSD lite
6) start flash and wait until it's finished
he's stuck in a repeat boot. he told me it was a fastboot but I didn't clarify if that meant it was a regular repeat boot screen or if it was the fastboot recovery screen. I didn't realize how different the razr was from my samsung phones. sorry if I am not making sense. He's in SC and I'm in AR so I am only going on what he is telling me.
I assume that he stucks in fastboot recovery.
The only chance to get the device working again is to flash ICS stock ROM with RSD lite.
AcidAngel21 said:
I assume that he stucks in fastboot recovery.
The only chance to get the device working again is to flash ICS stock ROM with RSD lite.
Click to expand...
Click to collapse
can you point me to where I can tell him how to do this? and with links to install please too thank you!
Try this: http://www.droidrzr.com/index.php/t...inux-all-in-one/page__pid__227369#entry227369
http://forum.xda-developers.com/showthread.php?t=2155576
Check out 2nd video.
I would also post links to fastboot files, motorola driver package and RSD-Lite, but unfortunately I'm not allowed to do with <10 posts
By the way, are you XT910 (GSM) or XT912 (CDMA) user?
Would you like to flash ICS or JB?
Note that for JB no fastboot files exits up to now. JB can not be flashed with RSD-Lite.
So long story short I managed to somehow ****up/bootloop the stock rom slot on my xt910. I managed to install the backup I made into slot-2 and have functionality but am unable to restore the stock slot. I then (before reading anything) tried to fastboot with my old ICS file only to have that fail. I know after research that it won't work and I found the JB fastboot I need.
So my question is this: can anyone foresee an issue trying to ap fastboot the JB files now after the failed ICS flash? Right now the phone boots into ap fastboot mode saying failed flash, but I am able to get to the menu with VOL+/- and access safestrap to boot into stock rom flashed to slot-2 and have a working phone. Above all I need a working phone so please let me know if you can think of anything that could go awry!
Thanks!
Cant downgrade
JTN81 said:
So long story short I managed to somehow ****up/bootloop the stock rom slot on my xt910. I managed to install the backup I made into slot-2 and have functionality but am unable to restore the stock slot. I then (before reading anything) tried to fastboot with my old ICS file only to have that fail. I know after research that it won't work and I found the JB fastboot I need.
So my question is this: can anyone foresee an issue trying to ap fastboot the JB files now after the failed ICS flash? Right now the phone boots into ap fastboot mode saying failed flash, but I am able to get to the menu with VOL+/- and access safestrap to boot into stock rom flashed to slot-2 and have a working phone. Above all I need a working phone so please let me know if you can think of anything that could go awry!
Thanks!
Click to expand...
Click to collapse
As far as I know,You cant downgrade from jb to ics.If you were running ics on stock slOt, you have to flash the ics fastboot files.If you try anything else you could end up with a brick or fail.
how can i solve that this is what i did t the phone get brick SO I download the sbf and rsd 5.7
the phone is whit the unlock bootloader so i get this sbf
1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011
1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012
i flash it the 2.3.4 and the rsd lite said "Flash failure: Phone[0000]: Phone did not re-enumerate after RAM-downloader was sent."
and the phone dont reboot so i take the battery off go to fastboot and did this
fastboot erase system
fastboot erase user data *or just data if user data doesn't work for you*
fastboot erase boot *this is important*
fastboot erase cache
fastboot reboot
Then boot into RSD mode flash the SBF file again.
but nothing happen i did whit he two sbf 2.3.4 and 2.3.6 also i try to flash the 2.3.4 via fastboot but the system image said is too large and failed
any ideas?
First off, what stock version were you on before you started flashing custom ROMs?
Sent from my MB886 using xda app-developers app
i guess wass 2.3.4 cause i flash CWM and isntall the CM7 it was running ok but one day it just reboot it selft and didnt boot up
It must have been on 2.3.4 because you flashed CWM and CM7? How is that even related?
well really dont know cause i was using the CM7 well till it failed dont know why or how so i decided to flash via rsd a stock sbf i ve flashed both i posted but still given me that error in the rsd lite re-enumeration so any ideas to solve that and flash the stock sbf on it
luismrosa said:
well really dont know cause i was using the CM7 well till it failed dont know why or how so i decided to flash via rsd a stock sbf i ve flashed both i posted but still given me that error in the rsd lite re-enumeration so any ideas to solve that and flash the stock sbf on it
Click to expand...
Click to collapse
Stock 2.3.4 and stock 2.3.6 have nothing to do with CM7. They are 2 different types of ROMs. Sbfs deal with stock, and thats all we're focused on right now, the stock version.
@ravilov does his result look like a bad file download/flash or does that look like a brick caused by a downgrade?
Sent from my MB886 using xda app-developers app
palmbeach05 said:
@ravilov does his result look like a bad file download/flash or does that look like a brick caused by a downgrade?
Click to expand...
Click to collapse
Not sure really. Actually I'm not quite sure what he's trying to accomplish here, and why bother with SBFs if he has working fastboot. Why not just get a fruitcake, unpack it, and flash boot and system manually through fastboot?
Also, more knowledgeable people say it is actually very hard to make a true hardbrick. If the phone is showing any signs of life, it is probably fixable (unless of course there is something wrong with the hardware). So there is at least that...
ok i did a few things like flash via fastboot bud to make more sure please can anyone of you give a link to re download the stock sbf and also the fruicake for fastboot flash cause it could be a problem whit the file i download it
guys i download a fruitcake from here http://forum.xda-developers.com/showthread.php?t=1583199
specially this 234-sb-release
but i get that flashing the system image in fastboot
sending 'sytem' (327680 KB)...
(bootloader) Image is too big, use 0x10000000 bytes chunks
FAILED (remote: (00000006))
finished. total time: 0.001s
any ideas help
Use moto-fastboot instead of fastboot. And don't be afraid to use forum search next time...
i flashed but nothing happend it stock on the unlocked screen like before
Did you try moto-fastboot? (Its different than regular fastboot)
Enviado desde mi MB860 usando Tapatalk 2
yesss i try it after doing the moto-fastboot it still doing the same stck in the unlocked screen
people thank for you respond i ve solve my problem i did this i think i have problem whiit the battery i guess i dont know but what i did was flashing via moto-fastboot the CWM recovery them i enter to it it appears run well so just flash again the CM7 and gapps for GB and thats it
enter to fastboot
moto-fastboot erase recovery
moto-fastboot flash recovery "CWM recovery"
moto-fastboot rebooot
enter to android recovery and flash ZIP
thanks to all for you rapid respond