Hi guys. Finally i updated to ICS from the OTA and i reunlocked HBoot with HTC Dev. Now i'm Unlocked again which recovery shuld i Flash? And how to root now?
Same here
I had previously relocked my phone and reverted to stock cause I could not get a kernal that would not reboot my phone or cause it to heat up on a custom ics rom. I ran the new OTA and unlocked the phone via hTCdec site. I am now on 2.89 w/ hboot 1.58 s-on. I flashed the 4ext recovery successfully. I want to go s-off just cause lol. will flashing Vipers OTA give s-off or is there something else I should do?
Yes i know 4ext is the best but you can not install it because you need root and to get root you need a zip file and a recovery first. My question is which recovery and SU zip file.
luis4ever said:
Yes i know 4ext is the best but you can not install it because you need root and to get root you need a zip file and a recovery first. My question is which recovery and SU zip file.
Click to expand...
Click to collapse
All you need is the img file and flash it through fastboot from a computer. After that just flash a rooted Rom or whatever you want
Sent from my PG86100 using Tapatalk 2
dr.chucky said:
All you need is the img file and flash it through fastboot from a computer. After that just flash a rooted Rom or whatever you want
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
Agreed. I am not currently rooted just unlocked. I flashed the recovery via fastboot. download a recovery .img and place it in the same folder where you have your unlock files for the htcdev site. in the command prompt direct it to the folder where u have fastboot and your recovery files. type,"fastboot flash recovery "yourrecovery.img" Do not use the quotations I used and replace yourrecovery with the file name of your recovery.
dr.chucky said:
All you need is the img file and flash it through fastboot from a computer. After that just flash a rooted Rom or whatever you want
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
Sure i know that too. The question is where do i find that 4ext Recovery img file?
Rooting
dr.chucky said:
All you need is the img file and flash it through fastboot from a computer. After that just flash a rooted Rom or whatever you want
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
I know with unlocked and 4ext recovery I can do most things a rooted phone can do, but I want to be rooted just for the heck of it lol. If I flash vipers stock rooted ota deodexed zip will that give s-off. or could I just push a SU flashable img?
luisrodz said:
I know with unlocked and 4ext recovery I can do most things a rooted phone can do, but I want to be rooted just for the heck of it lol. If I flash vipers stock rooted ota deodexed zip will that give s-off. or could I just push a SU flashable img?
Click to expand...
Click to collapse
If you flash Vipers you will not get S-OFF. Just a rooted system
luis4ever said:
Sure i know that too. The question is where do i find that 4ext Recovery img file?
Click to expand...
Click to collapse
Here ya go.
Related
Problem solved. Thanks to everyone that responded. I really do appreciate it!!!!
What exactly did you flash? The Mainver error only relates to the kernel IIRC.
The only thing I tried to flash was the custom recovery after I accidentally ran the ota update with the custom recovery still on my phone. When I should've flashed back to the stock recovery before accepting the update. And now I can't get into custom recovery. When I try to reflash armon ra it won't take. I've lost root access even though I have superuser still on my phone.
shane8262000 said:
The only thing I tried to flash was the custom recovery after I accidentally ran the ota update with the custom recovery still on my phone. When I should've flashed back to the stock recovery before accepting the update. And now I can't get into custom recovery. When I try to reflash armon ra it won't take. I've lost root access even though I have superuser still on my phone.
Click to expand...
Click to collapse
how are you trying to reflash Amon Ra ? , what recovery do you boot into ? As long as your still unlocked you should be able to flash Amon Ra through Hboot it has nothing to do with root access at that point. Even odder that the OTA flashed through the custom recovery, thought it would error out and not take if it wasn't the stock recovery. Unless you ran Con's Stock rooted, but then you wouldn't have an issue with superuser or root access.
Should be able to flash stock recovery through fastboot relock and RUU then if you really are stuck. Otherwise , no reason you shouldn't be able to reflash Amon Ra and reroot through recovery.
Download THIS
I take it the phone can't boot up at all? Have your tried fastboot flashing the stock kernel?
mjh68 said:
how are you trying to reflash Amon Ra ? , what recovery do you boot into ? As long as your still unlocked you should be able to flash Amon Ra through Hboot it has nothing to do with root access at that point. Even odder that the OTA flashed through the custom recovery, thought it would error out and not take if it wasn't the stock recovery. Unless you ran Con's Stock rooted, but then you wouldn't have an issue with superuser or root access.
Should be able to flash stock recovery through fastboot relock and RUU then if you really are stuck. Otherwise , no reason you shouldn't be able to reflash Amon Ra and reroot through recovery.
Click to expand...
Click to collapse
I'm trying to flash it in hboot as ph98img. And when I go to recovery it seems to go to the stock recovery with the little phone and a green circle but shortly after it turns into the red triangle and phone symbol.
Try flashing the recovery in fastboot. Download the latest version of AmonRa here and extract the recovery-ra-vigor-3.13-gnm.img. Take that file and place it in the same file directory you place the tools to unlock your bootloader (needs to be in the same directory as fastboot.exe).
Put your phone into bootloader and connect to PC and flash the recovery-ra-vigor-3.13-gnm.img in fastboot using the command:
fastboot flash recovery recovery-ra-vigor-3.13-gnm.img
Marcismo55 said:
Download THIS
I take it the phone can't boot up at all? Have your tried fastboot flashing the stock kernel?
Click to expand...
Click to collapse
It will boot and everything runs fine, I just can't get into custom recovery or install custom recovery. And my apps that need superuser permissions won't be allowed even though I still have superuser installed on the phone.
shane8262000 said:
It will boot and everything runs fine, I just can't get into custom recovery or install custom recovery. And my apps that need superuser permissions won't be allowed even though I still have superuser installed on the phone.
Click to expand...
Click to collapse
So you cannot flash the recovery through fastboot?
Marcismo55 said:
So you cannot flash the recovery through fastboot?
Click to expand...
Click to collapse
Nope. It just won't take. I can try it again and tell you exactly what it says as an error if that will help.
Marcismo55 said:
Try flashing the recovery in fastboot. Download the latest version of AmonRa here and extract the recovery-ra-vigor-3.13-gnm.img. Take that file and place it in the same file directory you place the tools to unlock your bootloader (needs to be in the same directory as fastboot.exe).
Put your phone into bootloader and connect to PC and flash the recovery-ra-vigor-3.13-gnm.img in fastboot using the command:
fastboot flash recovery recovery-ra-vigor-3.13-gnm.img
Click to expand...
Click to collapse
I'll try that and get back with you.
shane8262000 said:
I'll try that and get back with you.
Click to expand...
Click to collapse
Marcismo55 said:
Try flashing the recovery in fastboot. Download the latest version of AmonRa here and extract the recovery-ra-vigor-3.13-gnm.img. Take that file and place it in the same file directory you place the tools to unlock your bootloader (needs to be in the same directory as fastboot.exe).
Put your phone into bootloader and connect to PC and flash the recovery-ra-vigor-3.13-gnm.img in fastboot using the command:
fastboot flash recovery recovery-ra-vigor-3.13-gnm.img
Click to expand...
Click to collapse
Hey, when I download that file from your link, it is in .txt format. Am I missing something here?
Marcismo55 said:
Try flashing the recovery in fastboot. Download the latest version of AmonRa here and extract the recovery-ra-vigor-3.13-gnm.img. Take that file and place it in the same file directory you place the tools to unlock your bootloader (needs to be in the same directory as fastboot.exe).
Put your phone into bootloader and connect to PC and flash the recovery-ra-vigor-3.13-gnm.img in fastboot using the command:
fastboot flash recovery recovery-ra-vigor-3.13-gnm.img
Click to expand...
Click to collapse
Problem solved. Thank you very much!!!!
mjh68 said:
how are you trying to reflash Amon Ra ? , what recovery do you boot into ? As long as your still unlocked you should be able to flash Amon Ra through Hboot it has nothing to do with root access at that point. Even odder that the OTA flashed through the custom recovery, thought it would error out and not take if it wasn't the stock recovery. Unless you ran Con's Stock rooted, but then you wouldn't have an issue with superuser or root access.
Should be able to flash stock recovery through fastboot relock and RUU then if you really are stuck. Otherwise , no reason you shouldn't be able to reflash Amon Ra and reroot through recovery.
Click to expand...
Click to collapse
Thank you for the help!
Nice! Glad to help
I have a phone to return and would like to know how to remove Amon Ra Recovery I used the All-In-One Kit to install the recovery but i want to go back to stock and re-lock the bootloader ASAP can someone please help me I need to send this phone back. BTW what does the Stock option under kernel do would it return it back to stock recovery thanks.
flash the GB ruu and your phone will be stock but you will still have to relock the bootloader
Noob at Flashing RUU
Sorry for asking but I'm a noob at flashing but where do i get the stock RUU and how and where do i get it and flash it. Is there any links on how to do this. Would going to recovery and unzipping a file do the trick in my SD card. Not sure if i hit the spot on this but thanks for the help.
Got It
I figured it out thank you
JD164 said:
I figured it out thank you
Click to expand...
Click to collapse
If you could help me. What did you figure out and how did you do it?
Stock Recovery
I don't think you need to run an ruu to get the stock recovery back. search and you should be able to find a download link to get the stock recovery and you can just flash that with adb/fastboot.
the1Doctor said:
If you could help me. What did you figure out and how did you do it?
Click to expand...
Click to collapse
For stock recovery and latest ruu firmware: http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
Once you download, copy to root of micro sdcard, and rename to PH98IMG.zip
Then boot into bootloader, and it should detect it and flash automatically. note it has to flash twice. You must say yes, It will look like it rest and restarted, but it's normal.
Don't forget to delete or rename it after your done or
Sent from my Rezound using xda app-developers app
mvmacd said:
For stock recovery and latest ruu firmware: http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
Once you download, copy to root of micro sdcard, and rename to PH98IMG.zip
Then boot into bootloader, and it should detect it and flash automatically. note it has to flash twice. You must say yes, It will look like it rest and restarted, but it's normal.
Don't forget to delete or rename it after your done or
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
If you are on a stock ROM, all you have to do to replace amon ra is to do "fastboot flash recovery [stock recovery filename].img "
Then if you want to run amon ra again, just do "fastboot boot recovery [amon ra recovery].img"
I just wanted to be sure. I am S-OFF and have custom recovery installed, so can i flash the new firmware package through recovery or does it have to be done through fastboot?
Thanks
Travenport said:
I just wanted to be sure. I am S-OFF and have custom recovery installed, so can i flash the new firmware package through recovery or does it have to be done through fastboot?
Thanks
Click to expand...
Click to collapse
Flash firmware in bootloader and put it on your ext sdcard rename PJ75IMG.zip
Also use the one minus hboot,kernel, and recovery
bigdaddy619 said:
Flash firmware in bootloader and put it on your ext sdcard rename PJ75IMG.zip
Also use the one minus hboot,kernel, and recovery
Click to expand...
Click to collapse
thanks. I appreciate it
I am running a rooted Rez with Amon Ra Recovery which is otherwise stock ICS. I have tried three times to install the latest Global OTA. Each time the install fails after an attempt is made to install the downloaded package. The phone reboots into Amon Ra and I see the following messages.
Installing Update
Wrong Task ID 221384E: Error in /cache/fumo/OTAPkg.zip
Status 1
Installation Aborted
Anyone know what is happening? Thanks in advance for the help.
You need the stock recovery to do update....
Sent from my SCH-1605 / Galaxy Note 2 using Tapatalk v 2.4.13
more
Found out hard way: you can't just be on the last official RUU (3.14.605.12) to get the new update from Verizon.
ALSO dammit you have to have previously taken the small February update to 3.14.605.13. The update's name mentions
605.13 in its title. The problem is that you can't get that little update anymore!!!!
Those of us with only 605.12 may have to wait until the next RUU is issued. Gripes me.
You realise someone posted the full ruu zip in this thread. You don't have to get it from software update thing
Sent from my ADR6425LVW using xda app-developers app
tried that
still looks for 605.13 and craps out with an error message!
how to solve that
In February, Flyhalf205 uploaded the 605.13 OTA.zip in another thread.
The one I could not find anywhere.
You take that little one, rename it update.zip, and flash in hboot.
Do a factory reset and it'll boot up.
Then you can get the current OTA from Verizon.
13 zip is here
13 zip
http://forum.xda-developers.com/showthread.php?p=40819479
Sent from my SCH-1605 / Galaxy Note 2 using Tapatalk v 2.4.13
Here is the FIX
michaelbsheldon said:
still looks for 605.13 and craps out with an error message!
Click to expand...
Click to collapse
Download the PH98IMG.zip in the Attachment and put it on your SD Card
1. Flash the above file in Hboot and delete it after done flashing
2. Put the new update.zip on to your SD card.
3. Reboot into Bootloader and choose Recovery
4. It will flash the new update.
5. Download the new.global.firm.PH98IMG.zip from HERE ,rename it to PH98IMG.zip and flash it in Hboot to get the latest Hboot, Radio, ......
6. Done
Just to Be Sure
I managed to get the OTA getting me to 605.13. So if I want to get to 605.14, do I just get the new firmware zip file, rename it, place it onto the sd card, and install it in HBoot and I am good to go? Just checking to be sure. Thanks.
rjr1049 said:
I managed to get the OTA getting me to 605.13. So if I want to get to 605.14, do I just get the new firmware zip file, rename it, place it onto the sd card, and install it in HBoot and I am good to go? Just checking to be sure. Thanks.
Click to expand...
Click to collapse
I just tried but no go. It said there is no update script or something. Any solution?
nbhnohome said:
Download the PH98IMG.zip in the Attachment and put it on your SD Card
1. Flash the above file in Hboot and delete it after done flashing
2. Put the new update.zip on to your SD card.
3. Reboot into Bootloader and choose Recovery
4. It will flash the new update.
5. Download the new.global.firm.PH98IMG.zip from HERE ,rename it to PH98IMG.zip and flash it in Hboot to get the latest Hboot, Radio, ......
6. Done
Click to expand...
Click to collapse
Is this the same process if the device is s-on?
nissmo66 said:
Is this the same process if the device is s-on?
Click to expand...
Click to collapse
You can only use the official update with your bootloader locked and a non modified stock rom or you need to wait for a new RUU to come out.
mjones73 said:
You can only use the official update with your bootloader locked and a non modified stock rom or you need to wait for a new RUU to come out.
Click to expand...
Click to collapse
-or- s-off if s-off and on the latest ota it doesn't matter if you are locked or unlocked. You will need to flash a custom recovery and su when the ruu is done but the update will complete. You can also downgrade the bootloader (hboot) back to a modified one such as vinyl freaks if and only if s-off.
Sent from my Nexus 7 using Tapatalk HD
dottat said:
-or- s-off if s-off and on the latest ota it doesn't matter if you are locked or unlocked. You will need to flash a custom recovery and su when the ruu is done but the update will complete. You can also downgrade the bootloader (hboot) back to a modified one such as vinyl freaks if and only if s-off.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
If you're s-off, you can flash the firmware on it's own and not have to touch the recovery...
mjones73 said:
If you're s-off, you can flash the firmware on it's own and not have to touch the recovery...
Click to expand...
Click to collapse
True also.....
Sent from my Nexus 7 using Tapatalk HD
to get stock recovery open the zip take the recovery and use fastboot and flash recovery.img right guys?
dcasun said:
to get stock recovery open the zip take the recovery and use fastboot and flash recovery.img right guys?
Click to expand...
Click to collapse
yes... put the recovery.img in the same directory as your fastboot command and from a command prompt (at the same directory as your fastboot.exe) issue the command fastboot flash recovery recovery.img
dottat said:
yes... put the recovery.img in the same directory as your fastboot command and from a command prompt (at the same directory as your fastboot.exe) issue the command fastboot flash recovery recovery.img
Click to expand...
Click to collapse
place the recovery.img in platform tools
type fastboot flash recovery recovery.img
and lock the bootloader
run the update
reunlock the bootloader
flash custom recovery
and done
dottat said:
yes... put the recovery.img in the same directory as your fastboot command and from a command prompt (at the same directory as your fastboot.exe) issue the command fastboot flash recovery recovery.img
Click to expand...
Click to collapse
I was on 605.13 stock ICS, rooted and with Amon Ra recovery. I grabbed the 605.12 recover and flashed it and relocked the boot loader. I have tried multiple times to run the OTA (both pulling from Verizon and by putting it on the SD card). It keeps failing with the same 'Wrong Task ID' error mentioned by OP. I even wiped the SD Card, did clear storage from stock recovery, a couple of factory resets to no avail.
Can someone help? Is it possible that the 605.13 OTA a month or so ago didn't install properly since I had Amon Ra. In Software it shows I am at 605.13 so I doubt that. But would you suggest running the 605.13 Update.zip manually and then try to pull the OTA?
misalies said:
I was on 605.13 stock ICS, rooted and with Amon Ra recovery. I grabbed the 605.12 recover and flashed it and relocked the boot loader. I have tried multiple times to run the OTA (both pulling from Verizon and by putting it on the SD card). It keeps failing with the same 'Wrong Task ID' error mentioned by OP. I even wiped the SD Card, did clear storage from stock recovery, a couple of factory resets to no avail.
Can someone help? Is it possible that the 605.13 OTA a month or so ago didn't install properly since I had Amon Ra. In Software it shows I am at 605.13 so I doubt that. But would you suggest running the 605.13 Update.zip manually and then try to pull the OTA?
Click to expand...
Click to collapse
You will need to relock the bootloader then run the 605.12 RUU and let that boot up and not modify anything then you will get the 605.13 update first and then the latest after that, that is how I got the update and had no problems at all.
S-on users will need to relock/lock bootloader before flashing.
S-off users can simply flash using either method below. I also have included an S-off only option which i removed the boot and recovery img from (perfect for users on custom roms who only want to update firmware)
Option 1) Use fastboot to flash
fastboot oem rebootRUU
fastboot flash zip ATT444firmware.zip
*** If any message appears about reflush and flash run above command again ***
fastboot reboot-bootloader
**** this firmware has both stock boot and recovery so flash your custom rom's kernel and/or your custom recovery NOW before rebooting****
Option 2)
Rename zip file to 0P6BIMG.zip and place on your external SD card. Reboot to hboot and allow bootloader to update/flash
Download Links Do NOT mirror these elsewhere.
Stock signed/encrypted (includes stock boot and recovery)
Lollipop
- https://www.androidfilehost.com/?fid=95916177934552399
KitKat
- https://www.androidfilehost.com/?fid=95916177934529535
S-off only no boot or recovery img included
Lollipop
- https://www.androidfilehost.com/?fid=95916177934552398 ( included TWRP 2.8.6 with this)
Kitkat
- https://www.androidfilehost.com/?fid=95916177934529541
Help is available via teamviewer if needed
OMG I LOVE YOU :fingers-crossed:
This is REAL developer spirit!
i did option 2 and it goes thru the phase in bootloader, and when it boots i hear the boot up sound but stays on the HTC screen, but i can hit the vol up and i can hear the sound like it did a reboot but its stuck on the HTC screen. any ideas?
I think you will need to reflash your ROM as dottat did not specify if he had made the package for s-off not to wipe. Generally during firmware update, it will wipe clean the phone to reset partitions, I am assuming. If you come from gpe firmware, best to reflash because gpe and sense have different partitioning.
Hold power+vol up to force shut down then use power+vol down to get to bootloader and enter your custom recovery from there.
yaiba60 said:
I think you will need to reflash your ROM as dottat did not specify if he had made the package for s-off not to wipe. Generally during firmware update, it will wipe clean the phone to reset partitions, I am assuming. If you come from gpe firmware, best to reflash because gpe and sense have different partitioning.
Hold power+vol up to force shut down then use power+vol down to get to bootloader and enter your custom recovery from there.
Click to expand...
Click to collapse
Firmware won't wipe.
That said I believe by second option he meant SD card method. If he's s on he will likely need to reflash his roms kernel (boot.Img) via fastboot after unlocking again.
@hauntyu
Just pull the boot.img out of the zip of the rom you were running and flash that in fastboot mode after you unlock your bootloader again.
Which method would I use to flash the ruu or download because Im gpe and it says when I run the ruu its the wrong image.
MexicanSamurai said:
Which method would I use to flash the ruu or download because Im gpe and it says when I run the ruu its the wrong image.
Click to expand...
Click to collapse
You would need to set your cid and mid back to stock. Then flash the firmware only zip I posted in my other thread. Then factory reset. Then flash this ruu.
AT&T HTC One M7
Will this work for the M7?
dirtdigr said:
Will this work for the M7?
Click to expand...
Click to collapse
No.
Updated OP with fresh pickings... custom s-off firmware.zip now includes latest TWRP.
So if I'm rooted, s on, custom recovery and on 4.4.4 stock...How can I go about getting the ota?
Sent from my HTC One_M8 using XDA Free mobile app
thinkhope said:
So if I'm rooted, s on, custom recovery and on 4.4.4 stock...How can I go about getting the ota?
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
You have to flash stock 4.4.4 recovery and then relock. Then you can either download it from the other thread where it's posted and manually flash it in recovery or do it the regular way through update.
dottat said:
You have to flash stock 4.4.4 recovery and then relock. Then you can either download it from the other thread where it's posted and manually flash it in recovery or do it the regular way through update.
Click to expand...
Click to collapse
Got it. How can I go about doing? I've never had to backtrack so I want to be cautious. Thanks for the help. Apparently I already have the OTA downloaded in a fumo folder. Must've downloaded over night.
Sent from my HTC One_M8 using XDA Free mobile app
thinkhope said:
Got it. How can I go about doing? I've never had to backtrack so I want to be cautious. Thanks for the help. Apparently I already have the OTA downloaded in a fumo folder. Must've downloaded over night.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Flash this stock 4.4.4 recovery...
https://www.androidfilehost.com/?fid=95916177934552443
then fastboot oem lock
then update...
your rom you have right now must not have ANY modifications other than root or the update will fail (hotspot hack/sd card fix/etc).
dottat said:
Flash this stock 4.4.4 recovery...
https://www.androidfilehost.com/?fid=95916177934552443
then fastboot oem lock
then update...
your rom you have right now must not have ANY modifications other than root or the update will fail (hotspot hack/sd card fix/etc).
Click to expand...
Click to collapse
Can I flash it with twrp? Or does it have to be through my computer?
The only mods i have are xposed. I'll uninstall them before I do anything.
Sent from my HTC One_M8 using XDA Free mobile app
thinkhope said:
Can I flash it with twrp? Or does it have to be through my computer?
The only mods i have are xposed. I'll uninstall them before I do anything.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
You are gonna need to lock using your pc so your pc is required anyways. Make sure you back up your stuff before you unlock your boot loader again as it will factory reset your phone to do so.
dottat said:
S-on users will need to relock/lock bootloader before flashing.
Help is available via teamviewer if needed
Click to expand...
Click to collapse
I'm trying to get back to stock, but I'm S-On. Every thread I've seen (including this one) requires S-Off and I can't find instructions on how to relock the bootloader from S-On.
As I posted elsewhere, I've tried to run SunShine, but it won't work with LiquidSmooth. The couple of "stockish" ROMS I've flashed haven't worked and I've had to reflash my backup.
CanuckinPA said:
I'm trying to get back to stock, but I'm S-On. Every thread I've seen (including this one) requires S-Off and I can't find instructions on how to relock the bootloader from S-On.
As I posted elsewhere, I've tried to run SunShine, but it won't work with LiquidSmooth. The couple of "stockish" ROMS I've flashed haven't worked and I've had to reflash my backup.
Click to expand...
Click to collapse
Flash a stockish Rom and then separately flash the stock boot.img from the 4.4.4 firmware zip. Sunshine will fail on any Rom that uses a non stock kernel. Even debug turned on in kernel will cause it to fail.
OK so then it should go something like this..
1. Connect phone to PC.
2. Move recovery file you linked to my android folder on PC where my fastboot files are.
3. fastboot flash stock recovery
4. fastboot oem lock
5. Reboot
6. Take ota.
Am I missing something?
Sent from my HTC One_M8 using XDA Free mobile app
thinkhope said:
OK so then it should go something like this..
1. Connect phone to PC.
2. Move recovery file you linked to my android folder on PC where my fastboot files are.
3. fastboot flash stock recovery
4. fastboot oem lock
5. Reboot
6. Take ota.
Am I missing something?
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
That looks ok. Once booted up backup internal and stuff because when you reunlock you will get wiped again.