There is lots of concern about kernels and flashing them with various main versions. There are 3 basic main versions floating around:
Shipped Rezound - Main Version = 1.02.605.6
OTA Rezound - Main Version = 2.01.605.11
Leaked RUU for Android 4.0.3 - Main Version = 3.10.605.7
I am not going to mess with the leaked RUU for 4.0.3 but I can help with the other two. So, all of the following can be flashed in recovery and will install the library then reboot to bootloader to install the boot.img.
This will at least help you install a complete kernel for whatever situation you are in to cure things like WiFi broken.
Choose the one that best fits your situation, copy it to your SD Card, reboot to recovery and choose the Install Zip option. When it reboots to bootloader press power to start and then follow the instructions.
Currently running a Gingerbread ROM before installing the OTA:
Main Version = 1.02.605.6
Currently running a ICS ROM before installing the OTA:
Main Version = 1.02.605.6
Currently running a Gingerbread ROM after installing the OTA:
Main Version = 2.01.605.11
Currently running a ICS ROM after installing the OTA:
Main Version = 2.01.605.11
NOTE: You must be HTC UnLocked
If you are running the stock OTA stick with that kernel
By the way,
The GB kernel is the unlocked kernel for ADB when phone is active.
The ICS kernel is the one for ICS 4.0.1
thanks for writing this up Nils, I think it will save alot of problems and questions arising from flashing different roms !
thanks man!
are these stock kernels??
andybones said:
thanks man!
are these stock kernels??
Click to expand...
Click to collapse
GB is unlocked but other than that they are stock
Wow, you just helped soooo many people. :thumbup:
Good work! :beer:
What if I have
Kernel version: 3.0.13-gaf15497
Build number: 3.10.605.7
I want to get back to GB so I can unroot, relock, and get the OTA's new radio?
BBEgo said:
What if I have
Kernel version: 3.0.13-gaf15497
Build number: 3.10.605.7
I want to get back to GB so I can unroot, relock, and get the OTA's new radio?
Click to expand...
Click to collapse
I assume your at the 3.x main version then. I can get you to the stock kernel but can't change the main version with this approach. You could try the gb kernel from the released version and see if you get the mainver failure. If you do you can use the manual approach to get to mainver back to 1.02.605.6
I'm currently on rooted stock shipped Rezound, no OTA. I'm having trouble flashing back to CleanICS, ineffibilis ICS and ineffibilis Gb roms. I was previously on CleanICS. Then decided i wanted to go back to a Gb ROM. So what I did was flash a GB boot.img then I tried to flash ineffibilis Gb, but then the installation gets aborted in recovey. I was able to restore my stock rooted GB ROM though.
I tried to flash your kernel for "stock Gb Rezound, before OTA", but I'm also getting a Mainver failure.
What do I need to do to Be able to flash ineffibilis GB ROM? I'm currently on Gb stock no OTA. Shouldn't I be able to flash other Gb roms without worrying about mainver?
Will the "curently running ICS before OTA" also install the new firmware?
Sent from my HTC Rezound
Will the "curently running ICS before OTA" also install the new firmware?
Sent from my HTC Rezound
Click to expand...
Click to collapse
No, just the kernel
Finally got my head around this a couple of days ago, and thought someone should do exactly this. This is what makes you, you. Thank you Nile for being the kind of developer every phone needs.
Sent from my ADR6425LVW using Tapatalk
NilsP said:
Currently running a Gingerbread ROM after installing the OTA:
Main Version = 2.01.605.11
Currently running a ICS ROM after installing the OTA:
Main Version = 2.01.605.11
NOTE: You must be HTC UnLocked
If you are running the stock OTA stick with that kernel
Click to expand...
Click to collapse
In my case, I was on stock with OTA 2.01.605.11, and am installing Senseless 2.1 ICS. By your terminology, would I go with "running an ICS ROM after installing OTA", or stick to the stock kernel per the final bold statement?
spitzaf said:
In my case, I was on stock with OTA 2.01.605.11, and am installing Senseless 2.1 ICS. By your terminology, would I go with "running an ICS ROM after installing OTA", or stick to the stock kernel per the final bold statement?
Click to expand...
Click to collapse
If your going to the ICS ROM you need to flash the ICS kernel.
The last statement simply means if you are running the OTA don't bother with any other kernels.
Gotcha. Thanks Nils
So to go from your ICS back to a stock rooted nandroid restore what would be needed? The main version thing is confusing.
Sent from my ADR6425LVW
silverxbv2 said:
So to go from your ICS back to a stock rooted nandroid restore what would be needed? The main version thing is confusing.
Sent from my ADR6425LVW
Click to expand...
Click to collapse
To go back to stock from my ICS ROM as long as you have not installed the OTA just requires running the stock RUU. You should not have to relock or anything since you still have the stock radio and hboot.
Now if you installed the OTA that is another story and there is a whole thread about that.
Part of my reason for starting this thread was to help others with main version problems.
The second reason was to help myself and other developers determine when we could safely cut our ROM's over to the OTA main version even if we did not use the new OTA kernel.
The downloads for these kernels, even after just 1 day, clearly indicates that most people have either accepted the OTA or installed the OTA ROM on their own. In other words, most of the downloads are for the versions that are based on the OTA main version to be installed on custom ROM's that use the old main version kernels.
I will watch the downloads for a few more days then decide what to do with my ROMs
NilsP said:
To go back to stock from my ICS ROM as long as you have not installed the OTA just requires running the stock RUU. You should not have to relock or anything since you still have the stock radio and hboot.
Now if you installed the OTA that is another story and there is a whole thread about that.
Click to expand...
Click to collapse
No. I didn't run the ota. Just need to get back to the stock gb Rom I made a backup of right after unlocking and rooting for a minute.
Sent from my ADR6425LVW
silverxbv2 said:
No. I didn't run the ota. Just need to get back to the stock gb Rom I made a backup of right after unlocking and rooting for a minute.
Sent from my ADR6425LVW
Click to expand...
Click to collapse
Do the nand restore and flash the GB kernel with old main version.
Nils,
Just wanted to clarify one thing. I relocked, flashed original ruu, accepted ota, unlocked again and rooted. still using this rom which is essentially bone stock rooted. If I flash CR based off latest ota and later decided to restore nandroid of the bone stock, do I flash this kernel as well?
Currently running a Gingerbread ROM after installing the OTA:
Main Version = 2.01.605.11
my apologies for the question but I wondered in the case you are restoring a nandroid, do you need to also flash the kernel before restoring the nandroid. Hope I made myself clear. lol.
Do I really have to flash an RUU before flashing an ICS rom or is there an alternative?
if you want ics rom that has 2.01.605.11 than no u don't no need to.
if you want ics rom that has 3.11.605.22 than yes u need to ruu leaked ics.
Some of the roms offer a patch you can run instead..
For example - CleanRom
"UPDATE: Because some people are hesitant to flash the leaked RUU I have posted a patch for those with the old firmware HERE NO SUPPORT IS GIVEN FOR THE PATCH! Support will only be given for those on the leaked firmware!"
http://forum.xda-developers.com/showthread.php?t=1453324
mjones73 said:
Some of the roms offer a patch you can run instead..
For example - CleanRom
"UPDATE: Because some people are hesitant to flash the leaked RUU I have posted a patch for those with the old firmware HERE NO SUPPORT IS GIVEN FOR THE PATCH! Support will only be given for those on the leaked firmware!"
http://forum.xda-developers.com/showthread.php?t=1453324
Click to expand...
Click to collapse
+1 to this but some people are still having problems flashing the patch. I would just flash the RUU and do it the right way. Less problems and it was done right.
I've been back and forth from gb to ics. Just flash the rom let the kernel update, boot up the phone, go back to recovery and flash the patch.
Scott's newest cleanrom is for any RUU. His rom is as stable and as awesome as it gets.
05Warrior said:
+1 to this but some people are still having problems flashing the patch. I would just flash the RUU and do it the right way. Less problems and it was done right.
Click to expand...
Click to collapse
The latest CleanRom updates supports both now.. Personally I wouldn't RUU in case there's any issues with installing an official update unless you need to...
I installed it myself, this was before the patches came along...
We all know that new stock rom from ota is need 1.58 hboot, so the question is: what part that cause the boot loop if we use older hboot? New Kernel? Or the other parts of new rom? Please let me know.
Send From Sprint-HTC-Evo3D MIUI by Dh
New kernel. MikeyXDA put out a new version of meanROM based on the new ota except uses the vm leak kernel. Works fine for older hboots. Flash the new kernel with it, get bootloop if on older hboot.
Save the Drama for your Mama with Tapatalk 2
coal686 said:
New kernel. MikeyXDA put out a new version of meanROM based on the new ota except uses the vm leak kernel. Works fine for older hboots. Flash the new kernel with it, get bootloop if on older hboot.
Save the Drama for your Mama with Tapatalk 2
Click to expand...
Click to collapse
Ty boss.. hope the new kernel have good enough performance so its worth to upgrade hboot...
Send From Sprint-HTC-Evo3D MIUI by Dh
cupliz said:
Ty boss.. hope the new kernel have good enough performance so its worth to upgrade hboot...
Send From Sprint-HTC-Evo3D MIUI by Dh
Click to expand...
Click to collapse
I've heard it's pretty good. I'm personally holding out because I like zr3d (a GB ROM) which may not boot on the new fw.
Save the Drama for your Mama with Tapatalk 2
My Rezound is running on stock with GB patches for both CleanROM and ViperREZ. I was looking at trying out Nils' ROM, and he recommends updating to the latest RUU. What difference will this make in my phone and is this necessary?
TEdelman said:
My Rezound is running on stock with GB patches for both CleanROM and ViperREZ. I was looking at trying out Nils' ROM, and he recommends updating to the latest RUU. What difference will this make in my phone and is this necessary?
Click to expand...
Click to collapse
Its not "necessary" but its a good idea. You will not have to use the GB patch any more and it will update to the latest ICS firmware...your hboot and radios will be updated to the latest available.
I've been running MeanRom ICS. I wanted to give the sprint stock version a try. What's the best way to do this?
Thanks.
Oh, read the forums, I think about a gizzilion boot loops, problems, issue's
Sent from my HTC EVO 3D X515m using xda premium
Well since you can't update ota if you are rooted, just find a stock rooted rom and flash it just like any other rom. As you SHOULD know from reading, you can't run the new kernel without the new hboot, so update to that if you want to use the new kernel.
mtnbkr said:
I've been running MeanRom ICS. I wanted to give the sprint stock version a try. What's the best way to do this?
Thanks.
Click to expand...
Click to collapse
The 2.4 version I do believe was based on the VM leak. His newest 2.6 version is based on the latest Sprint release, and works just great. I have been running it with no issues.
If you have S-off , you can upgrade the hboot and kernel to the latest. If not, you can leave the kernel and hboot you have and just flash the rom.
Just and idea.