Hi Everyone,
Am in a bit difficulty here. I upgraded my tablet to the Briitish ICS release over the weekend. Everything works great except the error message I get when I try to run the Voodoo Volume Program. I have the purchased version as well and it tells me that I am missing a module.
After some research I decided to try another Kernel and tried one of Pershoot's. The Voodoo worked but the WIFi does not work.
I am not sure which Kernel I need to get both WiFi and Voodoo working. Any help would be appreciated.
I am running the kernel that came with the update. I believe the number is 3.1,.01 and ICS is 4.04
Thanks for any suggestions.
Regards,
Ten
PS Wifi version only
Related
Hi Sergei !
I use DSC from beginning. It is the best ROM.
I just wt to ask
Until now I already update .64b. I have no problem with all troubles such as wifi,reboot,camera...
Which kernel I should install? the original with upd0.64b or DSC_teamXX or GXkernel...
Bz i got confused about many of kernel
I need stability and long life battery for normal using.
Anyway thank a lot for the DSC rom from yr team
Appreciated that
Larry
For 0.64b I used the kernel that was provided. Prior to that I used GKernel 1.5, since I never had any luck with using the GXKernels on my device.
Good day to you!
Stable kernel is always included in our ROM.
We provide and test different kernels, but only tested and stable version goes into release.
First of all.....
Like many of us, we just wanted a solid/stable custom ROM and I couldn't be more grateful for the fine work Greg and _n0p_ are/have been doing.
I love DSC above the rest, but I too have the Wifi freezes, and have them with nearly all GB-based ROMs.
However, when I first went to GB from DJ_Steve, I didn't have Wifi issues. Unfortunately, everything else went wrong, so I searched for a better ROM. Ultimately, I installed Longhorn, with the BB and kernal. At that point, I started seeing Wifi troubles. After that point, every GB-based ROM gave me wifi freezes.
I've been following and installing the DSC updates as you release them, and each time, the freezes come back.
Each time, I go back and re-flash the GXkernal1.0, and all seems right. I may get a freeze on that kernal at some point, but I haven't had one yet. The other kernal updates gave me freezes within a few hours of installation.
Sorry for the tome, but suffice it to say, IMHO, GXkernal1.0 has been the stablest kernal for me.
Thank you. You gave a new idea.
Hi Sergei,
Good news!
I am using DSC0.64b+kernel 2.6.35-14-DSC-Team-Phoenix+ from yesterday until now. So far it is fantastic. I have no FC, no reboot, no prbl with wifi...
I were supprised why many people get wifi prbl.
Anyway thank u and yr team for DSC.
Yes, I have the DSC-Team-Phoenix kernal in right now. Installed this morning, got a wifi freeze a couple hours later, but battery too low to flash back to GXKernal1.0. So far so good on Phoenix. I'll reflash GXKernal1.0 later when/if I get another wifi freeze.
But yes, got wifi freeze on Phoenix too.
Hi _n0p_,
I saw in yr build.prop has 1 line:
#wifi.supplicant_scan_interval=120 instead of wifi.supplicant_scan_interval=120
might be it cause of wifi problem?
When I change that line, i have no problem at all with all yr DSC roms.
Sorry if that is wrong.
Larry
Hi chaps,
Can someone please help me with an issue I have. I have rooted my S2, and have just installed ninphetamone kernel (2.1.3) via CWM (currently on stock ROM)
I have now installed BLN with the understading ninphetamine supports BLN, however upon installation I have tried to go into BLN configuration but I am met with 'This liblights does not support BLN'
I'm still a bit of a noon at this, but can anyone please let me know what I am missing - I have searched but I am not getting a definitive answer on this (maybe i'm not searching correctly?)
Any comments much appreciated
Thank you
Skip bln and just use noled from the market, i found that both use around 150-170mv of power when active.
thanks, important not really concerned about the power consumption as such, if its bln at the sacrifice of power then i don't really mind the trade off
i have found another thread on here which discusses bln, but i haven't quite got an answer unfortunately. Im thinking perhaps i also need to install another Rom??
I've tried to install the liblights package via cwm but it seems to error
still looking, any input appreciated
Hi, Got a Player 5.0 on Ebay (YP-G70CW/XEU), where the camera does not work, but also just found out bluettoth does not work, as I use bluetooth headphones, I turn bluettoth ona and aftera few mins it times out, also klies does not connect (my galaxy tab 7 works fine and samsung phone), wifi works ok, so really want to put it back to its original, so in effect I am going backwards, but I know the Camera and BT will work, can anybody point me in te right direction for an easy walkthrough on what to do, I know i'll need the original (gingerbraed formware) and a kernel on top of this, but I am really confused by all teh different mods.
Player details
CM Mod version
9.0.0-RC0-venturi-usa-kang
Build no
IML74K
Model number
YP-G70
Android version
4.03
Kernel version
2.6.35.7-G&)UEKI8-CL566269 [email protected] #1
Any help or pointers would be greatly appreciated!!
tonyiles said:
Hi, Got a Player 5.0 on Ebay (YP-G70CW/XEU), where the camera does not work, but also just found out bluettoth does not work, as I use bluetooth headphones, I turn bluettoth ona and aftera few mins it times out, also klies does not connect (my galaxy tab 7 works fine and samsung phone), wifi works ok, so really want to put it back to its original, so in effect I am going backwards, but I know the Camera and BT will work, can anybody point me in te right direction for an easy walkthrough on what to do, I know i'll need the original (gingerbraed formware) and a kernel on top of this, but I am really confused by all teh different mods.
Player details
CM Mod version
9.0.0-RC0-venturi-usa-kang
Build no
IML74K
Model number
YP-G70
Android version
4.03
Kernel version
2.6.35.7-G&)UEKI8-CL566269 [email protected] #1
Any help or pointers would be greatly appreciated!!
Click to expand...
Click to collapse
Just head over to the Dev section and select one of the many GB roms available for the player and flash. Looks like you have a INT version so flash INT version of a GB rom and you are good to go.
Hi, thought that might be the case, I guess I'll need odin installed, the right SGP drivers, and then start the SGP in download mode, connect and use odin to flash the stock GB rom. Is it just the ROM I need then, and woudl I need to wipe/format the SGP so there would be no legacy stuff (I only use it for music/video playback), so really its the same process as if I was going from Gingerbread to ICS, anyways thanks very much, I'll get some research done!!!
Hi Everyone,
Am in a bit difficulty here. I upgraded my tablet to the Briitish ICS release over the weekend. Everything works great except the error message I get when I try to run the Voodoo Volume Program. I have the purchased version as well and it tells me that I am missing a module.
After some research I decided to try another Kernel and tried one of Pershoot's. The Voodoo worked but the WIFi does not work.
I am not sure which Kernel I need to get both WiFi and Voodoo working. Any help would be appreciated.
I am running the kernel that came with the update. I believe the number is 3.1,.01 and ICS is 4.04
Thanks for any suggestions.
Regards,
Ten
Hello everybody. I am a new convert from an iphone, had all the iphones upto #5, jaibroke all of them and basically messed around as much as I could.
I switched to an HTC One verizon version, and love everything about android.
I am S-off and rooted, I have NuSense One max 7.3 (JB 4.3 w/sense) installed its an amazing ROM, I just wanted a little more functionality so I installed OBOne KernOB 4.2.2/4.3 [3.4.10][SenseJB].
Everything functions perfectly fine but the phone mic and speaker do not work. Any suggestions would be greatly appreciated, I have tried posting at on the developer forum, but cant since I am new. I have reinstalled the kernel specific to Nusense and everything works as it should.
Is there a way to install the custom Kernel and fix sound.
If anyone can help I would greatly appreciate it.
Thanks in advance.