Related
Is there any unsecured kernal support this rom to root ?
Without using CWM ?
If I rooted with SuperOneClick with compatible insecured kernel, Yellow triangle and Reset counter actions possible with Flashing back stock kernel and download mode jig ?
Reply from subject experts are most welcome ..
Sent from my GT-I9100 using xda premium
i am looking for the same answers.
No replies ??
Sent from my GT-I9100 using xda premium
I used XXK14 insecure and rooted with S2 Root. Afterwards I flashed back stock kernel with Odin
Root with CF-Root kernel for KI8 then flash back to the stock kernel. You'll maintain root but lose the CWM Recovery menu. You'll have stock recovery, stock kernel and no yellow triangle.
thank you, I will try and post the result
Sent from my GT-I9100 using xda premium
This will increase the counter ? Can I reset Using download mod jig ?
Sent from my GT-I9100 using xda premium
shafeeqmk said:
Is there any unsecured kernal support this rom to root ?
Without using CWM ?
If I rooted with SuperOneClick with compatible insecured kernel, Yellow triangle and Reset counter actions possible with Flashing back stock kernel and download mode jig ?
Reply from subject experts are most welcome ..
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
i have the same version as the one you mentioned in your post
kernel version
2.6.35.7-I9100JPKJ2-CL655700
[email protected] #2
PDA: I9100JPKJ2
PHONE: I9100XXKI4
CSC: I9100OJPKJ1
and i searched for insecured kernel but i didnt know which one to use
and then i tried this script (DooMLoRD_v1_ROOT-zergRush-busybox-su.zip)
http://forum.xda-developers.com/showthread.php?t=1312859
i replaced zergRush file with the latest versions before running the batch
https://github.com/downloads/revolutionary/zergRush/zergRush.zip
and it rooted the device in less than 3 minutes with no problem at all (running titanium, rom manager or any app that require root)
but i faced one problem when using ROM Manager (ClockWorkMod 4.0.1.5) to do a Backup current ROM (from Rom Manager or by booting into Recovery)
I get the following message:
-- Installing package...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
don't know if doing soft-root is the problem and i have to do hard-root to make CWM work
any way just wanted to share my experience with you
regards
Thanks man it worked like a charm
btw where is that +1 button? I can't seem to find it
another way to root is using SuperOneClick v2.2 since now it have the zergRush exploit
so it will work also
Just extract SuperOneClick 2.2, run it and click Root
(I test it on same device after unrooting it and it worked perfectly)
http://forum.xda-developers.com/showthread.php?t=803682
Koudelka said:
another way to root is using SuperOneClick v2.2 since now it have the zergRush exploit
so it will work also
Just extract SuperOneClick 2.2, run it and click Root
(I test it on same device after unrooting it and it worked perfectly)
http://forum.xda-developers.com/showthread.php?t=803682
Click to expand...
Click to collapse
Rooted perfectly with SuperOneClick 2.2 , with Just One Click ...
HELP
I did flash insecured kernel, rooted with odin and flashed back stock kernel everything was good untill i used titanium backup and actually deleted some staff not freezing them DELETE from rom how can i get the phone back to stock. is there a complete rom and a way to install that rom back with all what i deleted ?
odm3xda said:
I did flash insecured kernel, rooted with odin and flashed back stock kernel everything was good untill i used titanium backup and actually deleted some staff not freezing them DELETE from rom how can i get the phone back to stock. is there a complete rom and a way to install that rom back with all what i deleted ?
Click to expand...
Click to collapse
Just flash a firmware over you current firmware to get stock firmware wit stock apps or just download and installed iteams you deleated...
is there a way to get rid of touchwiz on this device ? and use android stock looks all over the phone ?
not only the launcher i mean every samsung custom dialer, messaging, notification bar and everything
odm3xda said:
is there a way to get rid of touchwiz on this device ? and use android stock looks all over the phone ?
not only the launcher i mean every samsung custom dialer, messaging, notification bar and everything
Click to expand...
Click to collapse
Yes you can, but for this you need Root.
In rooted phone, just delete the unwanted applications (caution advised) by using root explorer and deleting the apks in /system/apps
Koudelka said:
another way to root is using SuperOneClick v2.2 since now it have the zergRush exploit
so it will work also
Just extract SuperOneClick 2.2, run it and click Root
(I test it on same device after unrooting it and it worked perfectly)
http://forum.xda-developers.com/showthread.php?t=803682
Click to expand...
Click to collapse
did u try to unroot the phone from the same app? does it work?
cyberkhan said:
Yes you can, but for this you need Root.
In rooted phone, just delete the unwanted applications (caution advised) by using root explorer and deleting the apks in /system/apps
Click to expand...
Click to collapse
Yikes. Don't follow this extremely abridged suggestion.
S2 Root
Koudelka said:
another way to root is using SuperOneClick v2.2 since now it have the zergRush exploit
so it will work also
Just extract SuperOneClick 2.2, run it and click Root
(I test it on same device after unrooting it and it worked perfectly)
http://forum.xda-developers.com/showthread.php?t=803682
Click to expand...
Click to collapse
Dear Koudelka,
Iam new to Android and Root.
Iam bit Confuse firmware and Root.
I want root my Galaxy S2
My S2 details
kernel version
2.6.35.7-I9100JPKJ2-CL655700
[email protected] #2
PDA: I9100JPKJ2
PHONE: I9100XXKI4
CSC: I9100OJPKJ1
Etisalat,Dubai.
Can you advice where can i download correct root application and how to.
Thanks & Regards,
Murali.K
Dubai
pick the correct cf root kernel from my signature link if u are looking for method to root your phone
in a single flashing you will get Rooting and CWM
for JPKJ2 use this kernel, flash it from PDA section of the ODIN after unzipping to TAR file
read Gides for flashing files from ODIN...
http://download.chainfire.eu/48/CF-Root/SGS2/CF-Root-SGS2_XW_XEF_KJ2-v4.4-CWM4.zip?retrieve_file=1
Jpkj2 can also be rooted using super one click using zergrush.
Counter will not bee added and you will not get yellow triangle
I search, but I can't find solution how to root Samsung Galaxy SII GT-I9100 with new version of android:
v4.03
kernel: 3.0.15-I9100XWLP7-CL340913
Build: IML74K.XWLP7
Baseband: I9100XXLPS
If someone can help me to post here a link for one-click solution what is tested and working 100% I will be thankful.
Any help is welcome.
Thx.
www.theandroidsoul.com/root-xwlp7-and-xwlp8-firmwares-on-galaxy-s2-ice-cream-sandwich/Easy way to root is by googling ' root your kernel version' for example rout dxlp9
Sent from my GT-I9100 using xda premium
1 Cfroot
2 Root without insecure kernel.
I use Odin, but had a lot of difficulties reseting the yellow triangle after, so I bought the triangle away app. (You don't have to b/c it is free at XDA). Now if you find Oneclick method easier, then go for it.
Sent from my GT-I9100 using Tapatalk 2
I have the same xwlp7 and rooted and install cm9.
Google xwlp7 u will easily find insecure kernel for it.
U can watch some movies on YouTube to learn it first and get comfortable. Video from galaxys2root.com is good.
If u want to put custom rom then buying rom manager app is the safest and easiest way.
Sent from my GT-I9100 using Tapatalk 2
vmittal said:
I have the same xwlp7 and rooted and install cm9.
Google xwlp7 u will easily find insecure kernel for it.
U can watch some movies on YouTube to learn it first and get comfortable. Video from galaxys2root.com is good.
If u want to put custom rom then buying rom manager app is the safest and easiest way.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Thx for all answers but is there any solution for rooting and swm to not increase flash counter, and where I can make this without flashing new kernel!?
thx
easyyu said:
Thx for all answers but is there any solution for rooting and swm to not increase flash counter, and where I can make this without flashing new kernel!?
thx
Click to expand...
Click to collapse
already gave you answer all you needed was to search...........
http://forum.xda-developers.com/showthread.php?t=1501719
if you have GB then u can use doomlord root toolkit, then you can find the cf root kernel needed to match your kernel, extract till just a zImage, download InitialCFRootFlasher.zip and installed zImage manually that will give you root and cwm, then install mobile odin and away you go with out increasing binary counter. if you are on ICS then there is a thread somewhere on here for rooting ics other than cf root.
InitialCFRootFlasher.zip you unzip it then put you zImage in the insert zImage here folder then click the rooted option
But with this method read read READ, and dont use wrong CF zImage or you will be flashing firmware via odin tofix it
bombaybadboy said:
if you have GB then u can use doomlord root toolkit, then you can find the cf root kernel needed to match your kernel, extract till just a zImage, download InitialCFRootFlasher.zip and installed zImage manually that will give you root and cwm, then install mobile odin and away you go with out increasing binary counter. if you are on ICS then there is a thread somewhere on here for rooting ics other than cf root.
InitialCFRootFlasher.zip you unzip it then put you zImage in the insert zImage here folder then click the rooted option
But with this method read read READ, and dont use wrong CF zImage or you will be flashing firmware via odin tofix it
Click to expand...
Click to collapse
Did you even read the OP?
bombaybadboy said:
if you have GB then u can use doomlord root toolkit, then you can find the cf root kernel needed to match your kernel, extract till just a zImage, download InitialCFRootFlasher.zip and installed zImage manually that will give you root and cwm, then install mobile odin and away you go with out increasing binary counter. if you are on ICS then there is a thread somewhere on here for rooting ics other than cf root.
InitialCFRootFlasher.zip you unzip it then put you zImage in the insert zImage here folder then click the rooted option
But with this method read read READ, and dont use wrong CF zImage or you will be flashing firmware via odin tofix it
Click to expand...
Click to collapse
Sorry mate, but this is not solution for me..
I wanna root and cwm without flashing new kernel!!!
I think you didn't read my post carefully.
atifsh said:
already gave you answer all you needed was to search...........
http://forum.xda-developers.com/showthread.php?t=1501719
Click to expand...
Click to collapse
Thx for this, I will try this metod and then notify you is this help me!
I didnt say anything about flashing new kernel, i told you a way of minipulating kernel you have without using insecure kernel and without yellow triangle, only talked about mobile odin for your plans after, but if you trying not to void warrenty and keeping binary count as it is you will need mobile odin to flash original kernel if you ever want to remove cwm, once it is in its hard to remove without replacing kernel. I see someone already gave u link for ics rooting. i read between the lines of OP there is normally only one reason people worry about binary count.
Ps also triangle away app is suppose to reset binary count anyway but never bothered with it myself. every thing i told you about can also be undone without increasing binary count to
Hi. I had i9300XXELLA before , Rooted + CW Recovery + Sihay Kernel. I was installing some roms as second rom like (cm10.1 nightles, Piquidsmooth RC1, ParanoidAndroid 3.0, Supernexus 2.0) after installing the lates CM 10.1 i lost my ime and baseband. After i send to servis center and now i have i9300BULG2 whith CW Based CF v-1.5 but i dont have SU. I want to now if i can install SU via recovery or i Need Odin ( i want to save EFS file) and if i can update via odin to 4.1.2 coz OTA update failed at 30%. Sorry for my long question and if this was ansered before. Thnx
Sent from my Gt i9300
Enea307 said:
Hi. I had i9300XXELLA before , Rooted + CW Recovery + Sihay Kernel. I was installing some roms as second rom like (cm10.1 nightles, Piquidsmooth RC1, ParanoidAndroid 3.0, Supernexus 2.0) after installing the lates CM 10.1 i lost my ime and baseband. After i send to servis center and now i have i9300BULG2 whith CW Based CF v-1.5 but i dont have SU. I want to now if i can install SU via recovery or i Need Odin ( i want to save EFS file) and if i can update via odin to 4.1.2 coz OTA update failed at 30%. Sorry for my long question and if this was ansered before. Thnx
Sent from my Gt i9300
Click to expand...
Click to collapse
As far as i understand
SU is only an app, you can install it from Play if you still have root acess that is?
If you install 4.1.2 via odin you will have to do the whole rooting procedure again.
I have installed SU from PlayStore but doest have superuser aces. I have to update 4.1.2 after i can try to root whith odin. I hope not to lose my EFS again.
Sent from my GT-I9300 using xda app-developers app
Enea307 said:
I have installed SU from PlayStore but doest have superuser aces. I have to update 4.1.2 after i can try to root whith odin. I hope not to lose my EFS again.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
sounds like you need to root your phone again, which i would assume since it went to a service centre. I would root it, backup your EFS then flash 4.1.2 and root that.
OK, think I must be being a little bit blind around the forum, but cannot seem to locate how and links to perform a root once I update to 4.3
I'm running 4.1.2 and am currently rooted (I used CF-Root-SGS3-v6.4 since forever and always seems to work), which seemed to work fine on 4.1.2. However, reading all over the place about rooting being different on 4.3, but as I said, just cannot seem to find links and info on how to do it on the latest
I know I can easily install the 4.3 update using ODIN to replace 4.1.2, but would then like to re-root once this has been done
Any help and links much appreciated
Cheers
Albie
albie999 said:
OK, think I must be being a little bit blind around the forum, but cannot seem to locate how and links to perform a root once I update to 4.3
I'm running 4.1.2 and am currently rooted (I used CF-Root-SGS3-v6.4 since forever and always seems to work), which seemed to work fine on 4.1.2. However, reading all over the place about rooting being different on 4.3, but as I said, just cannot seem to find links and info on how to do it on the latest
I know I can easily install the 4.3 update using ODIN to replace 4.1.2, but would then like to re-root once this has been done
Any help and links much appreciated
Cheers
Albie
Click to expand...
Click to collapse
i used this http://download.chainfire.eu/229/CF-Root/CF-Auto-Root/CF-Auto-Root-m0-m0xx-gti9300.zip and worked just fine
edit: i used the odin included inside the .zip and put the root file at PDA
If you have Mobile Odin, that's the easiest way. Used it to root MK6
I used CF Auto Root on the OTA update and it was fine.
Sent from my GT-I9300T using xda app-developers app
Excellent .. thanks guys. Was just a little worried with all the stuff have been reading about the latest 4.3 and Knox etc, that it might not be possible to root. I understand that the knox flag is now triggered, but to me that is not a prob, as don't really worry about the warranty
I rooted my 4.3 via cf root 6.4 but flashed it via odin. Unzip go to download mod put cf root md5 into pda and hit start. Than go to custom recoveri and flash su 1.8 update from sd card. Easy
Sent from my GT-I9300 using Tapatalk
uglyjohny said:
I rooted my 4.3 via cf root 6.4 but flashed it via odin. Unzip go to download mod put cf root md5 into pda and hit start. Than go to custom recoveri and flash su 1.8 update from sd card. Easy
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Do you have Knox in 4.3? Does rooting trip the Knox flag?
Knox isnt part of 4.3 rom for sgs3.
Sent from my GT-I9300 using Tapatalk
uglyjohny said:
I rooted my 4.3 via cf root 6.4 but flashed it via odin. Unzip go to download mod put cf root md5 into pda and hit start. Than go to custom recoveri and flash su 1.8 update from sd card. Easy
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
was searching for a root method for 4.3
this method worked for me just fine!
Thank you!
where do u get the su 18.8 update, , noob question, but i need to get it
also tryed cf root , but the s3 is still not rooting,
i am using the gt-i9300 s3,
Shadow1109 said:
where do u get the su 18.8 update, , noob question, but i need to get it
also tryed cf root , but the s3 is still not rooting,
i am using the gt-i9300 s3,
Click to expand...
Click to collapse
Play Store
Mine will not root either just keep getting the same SU binary is not installed message. Any help please?
Re-download
swipermusic said:
Mine will not root either just keep getting the same SU binary is not installed message. Any help please?
Click to expand...
Click to collapse
Redownload Super SU will solve your problem.:good:
root not
People on my phone is not updated, it does when you restart the whole procedure but it does not have the superuser before I'd root but I had to reset the phone and he came back with 4.3 Direct can help me? S3 4.3 ZTO BRAZIL
My device is not rooted!!
Hi, i installed Imperium v23.2 today and when i tried to use Titanium backup it failed to load because there is no SU binary?
so i rooted my device again using CF Root V6.4 and the same problem presented, i uninstalled SuperSU updated it and no luck.
Any advice?
My Device is SG3 GT i9300 international version.
Sort it out
I found the answer and worked in this thread:
http://forum.xda-developers.com/showthread.php?t=2393500
i flashed the 4.3 superuser.zip and worked for me.
Cheers:good:
Is it possible to root GT-I9100 without changing stock kernel?
heyjhay said:
Is it possible to root GT-I9100 without changing stock kernel?
Click to expand...
Click to collapse
yes, if you're running a JB version 4.1.2 look here its framaroot:
http://true-android.blogspot.com/2013/12/how-to-root-galaxy-s2-gt-i9100-running.html
or this one using CF-auto-root:
http://scientimystic.wordpress.com/...i9100-having-android-4-1-2-official-firmware/
for more information about cf root look here: http://forum.xda-developers.com/galaxy-s2/orig-development/30-10-2012-k-la-lp-t1103399
I think cf root is more better than framaroot for your device because its designed for it and other more devices... so pls. read about Cf root above
pinkLeviosa said:
yes, if you're running a JB version 4.1.2 look here its framaroot:
http://true-android.blogspot.com/2013/12/how-to-root-galaxy-s2-gt-i9100-running.html
or this one using CF-auto-root:
http://scientimystic.wordpress.com/...i9100-having-android-4-1-2-official-firmware/
for more information about cf root look here: http://forum.xda-developers.com/galaxy-s2/orig-development/30-10-2012-k-la-lp-t1103399
I think cf root is more better than framaroot for your device because its designed for it and other more devices... so pls. read about Cf root above
Click to expand...
Click to collapse
I read about cf root but for my understanding it only works on ICS not in JB and about the link you gave i really need both the cf root and philz to root my device without changing stock kernel?
heyjhay said:
I read about cf root but for my understanding it only works on ICS not in JB and about the link you gave i really need both the cf root and philz to root my device without changing stock kernel?
Click to expand...
Click to collapse
yeah.. its for GB and ICS , for that im really sorry:crying: ... now for the latest version of ICS and JB they use Philz kernel, its a rooted kernel with a customized(philz touch) CWM on it... the philz kernel change your stock kernel to a rooted stock kernel... meaning they add some nice feature on it.. but its the closest stock kernel you'll have... but still it will change the stock kernel , that you dont want to happen... :crying:
forget about that link though there's so many changes on how to root your device (im really sorry about that) ... now ... if you want still to go for CF root but it will change your stock kernel you need to find the compatible version of it .. based on your model number..
But i think framaroot will do the work.. go for the link about framaroot before that install CWM 6 :
http://techbeasts.com/2014/03/28/how-to-install-cwm-6-recovery-on-samsung-galaxy-s-ii-gt-i9100/
then follow on how to root using framaroot...
btw i found a link on how to root your device using framaroot and install kitkat rom on it, Here:
http://luvis.se/tipstricks/root-and-install-kitkat-on-samsung-galaxy-s2-i9100-without-a-computer/
okay im no responsible of bricking your device do it at your own risk, the decision is up to you now:fingers-crossed:
As pinkLeviosa says PhilZ *IS* a JB stock kernel......with root and CWM added.....
So it will do EXACTLY what you want.......
You keep the same stock setup, but you're rooted........
My wife says I'm a phone geek....She's probably right